Ubuntu Installation :: Copying Data Setup Tells About An Input/Output Error?
Dec 20, 2010
I want to install Xubuntu 10.10 x64, but it does not work. While copying data the setup tells me about an Input/Output error, but i don't think there are hardware errors.
The environment:
AMD Phenom II 1055t 6x2,8 Ghz
2x 2gb ram
Hitachi 1TB hard drive
Two partitions: 1st for Windows 7 Ultimate (NTFS), 2nd for my Data (NTFS)
So I decreased the size of the data partition and created two new partitions beside the Win7 partition and the data partition. The first is ext4-journal (20gb) the second is Swap (4gb). I've done that all by the Xubuntu setup.
I've downloaded the image from the german mirror (TU Chemniz) and checked the integrety via SHA1. Checksum was correct. I also checked the data after burning.
View 4 Replies
ADVERTISEMENT
Oct 18, 2010
i tried to rip a dvd last night and it got 98% done then said "Data could not be written (Input/output error)"here is the error log from brasero
Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1744)
BraseroDvdcss called brasero_job_get_action
BraseroDvdcss called brasero_job_get_action
[code]....
View 2 Replies
View Related
Mar 15, 2010
I don't know the format of these old floppie disks, ive tried
Code:
PC8-248suse:~ # file -s /dev/fd0
/dev/fd0: ERROR: cannot read `/dev/fd0' (Input/output error)
how i can go about reading this data?
View 9 Replies
View Related
Jun 3, 2010
When I try to copy PDF files from one folder to another folder, it give me this error: "Error while copying "2004-SNUG-Europe-paper_...log_DPI_with_SystemC.pdf". There was an error copying the file into /media/CCDCE66BDCE64F70/Backup Master/Heterogeneous_cosimulation/Documentation" "Error splicing file: Input/output error" What is the reason of this error and how can this be fixed?
View 9 Replies
View Related
Jun 29, 2010
I have a 7.2 GB file (VMWare virtual machine file) that I am trying to copy from its original location to the another folder OR to external hard drive...each time I try to do this, I always get the following error after the copying process reach 'exactly' 1.4 GB
Error reading from file input/output error
And I have to either Cancel or Skip
I've tried to split the files to smaller pieces but the idea didn't work as I still get the same error whenever I try to compress/ split or do any operation with this file. how I can copy this file?
View 2 Replies
View Related
Dec 21, 2010
I booted my Fedora 13 live CD on my Dell server, and configured networking and SSHd. On my desktop I logged into the live cd and started copying over a big file (1.5 GB) (i.e. copying from the desktop computer to the server). After copying about half the fil, the download fails with an error message about the filesystem being read-only.I've seen this exact same behavior on both i386 and x86_64 of the same live CD, but don't know why it's happening. I've also had the same issue when copying small files. In /var/log/messages these messages are repeated many times:
Code:
Dec 20 12:32:23 localhost kernel: Buffer I/O error on device dm-0, logical block 684075
Dec 20 12:32:23 localhost kernel: lost page write due to I/O error on dm-0
[code]....
View 6 Replies
View Related
Jul 31, 2010
whenever I copy (or move) files from one place on my hd to another One or two of them dont copy, and I get an error similar to " There was an error copying the file into [location]. Show more details> Error splicing file: Input/output error. The file is always an .avi file and always between 600MB and 1.4GB in size, how can I fix this problem?
View 9 Replies
View Related
Nov 26, 2010
I have a headset microphone plugged into the built-in audio input. The output is plugged into an amplifier > speakers.
Pulseaudio is "helpfully" routing the microphone input signal to the speaker output. I do not want this. I go to pavucontrol and disable the "monitor of the internal audio analog stereo" -- and what I say into the microphone is still coming out of the speakers.
Google gives a lot of information about how to live-stream mic input over the Internet. And, I found this here (that's for karmic, I'm running lucid):
[URL]
... but that's about how to ENABLE loopback. It says loopback should not be enabled by default, but I very clearly hear that something is doing the same thing as loopback.
(Of course, I need to hear sound from applications that are playing, and when I'm dictating text into NaturallySpeaking running under virtual box, I need sound input to go there -- so turning the mic all the way down to zero is not the solution.)
I'm fairly sure I remember hearing this behavior ever since installing Ubuntu, and I didn't do anything to turn it on. I can't imagine most users would prefer this behavior -- if it's the default behavior, why? It makes absolutely no sense to me. (Sorry. It's one of those piddly little configuration things that costs a couple of hours of web searching time, and after a while I just have to give up, but not before becoming much more frustrated than I should have to.)
So, to be clear, here's what I want:
- Applications playing audio should send sound to the main output.
- Applications receiving audio input should hear the microphone.
- Microphone sound should not EVER go to the main output unless I have explicitly launched an application making the connection. (The signal goes input -> output even when NO application is open - hence my consternation.)
View 1 Replies
View Related
May 23, 2010
I'm trying to install ubuntu 10.04 on my desktop. I would like to erase my old xp completely and have only ubuntu as my OS. I boot from cd but when I install it stops at 15% and keeps giving me this error:
Input/output error during write on /dev/sda.
It won't let me retry or ignore and when I cancel the installation continues until I get another error.
View 2 Replies
View Related
Oct 2, 2010
I got interested in it when trying to play Windows games on my Mac. I've tried WINE and didn't get anywhere fast, but thats another thread for a different forum.
For now I'd like to try Ubuntu. I downloaded the ISO and burned it to a DVD and a CD.
When booting up my computer I get this message:
I have no idea what this means. I've tried to find answers on this forum with no luck.
The computer in question:
iMac8,1
Intel Core 2 Duo
3.06 GHz
4GB Memory
NVIDIA GeForce 8800 GS (512 MB)
MacOS 10.5.8
View 3 Replies
View Related
May 1, 2011
Asus EEEPC 1215P
Intel Atom N550 1.5 GHz
2 GB DDR3
Ubuntu 10.10
Maverick Meerkat
Desktop Edition
Tried changing BIOS setting...
SATA Run Mode configuration
Enhanced AHCI
Enhanced IDE
Compatibility
Disabled
non of them worked
View 1 Replies
View Related
Aug 28, 2010
I am trying to install v 10.04.1 and it works up till 34% and then it gives me that error. So annoying and i don't have any other OS's.
I am posting this from a bootable 9.10 CD which doesnt even partition right.
I have a 64 bit CPU but i downloaded 32 bit ubuntu.
View 9 Replies
View Related
Oct 10, 2010
I've managed to boot up ubuntu-10.10-desktop-amd64 using PXE, but when the installer is copying the files it fails. I've md5sum checked the iso and it is OK.
Quote:
This is often due to a faulty CD/DVD disk or drive, or a faulty hard disk. It may help to clean the CD/DVD, to burn the CD/DVD at a lower speed, to clean the CD/DVD drive lens (cleaning kits are often available from electronics suppliers), to check whether the hard disk is old and in need of replacement, or to move the system to a cooler environment.
View 4 Replies
View Related
Jan 17, 2011
The trouble I'm having is that when I load a bootable USB/CD of 64bit 10.10, I always get an error that looks a little like: "(initramfs) mount: mounting /dev/loop0 on //filesystem.squashfs failed: input/output error. Can not mount /dev/loop0 (cdrom/casperfilesystem.squashfs) on //filesystem.squashfs." I've done some googling and I've noticed people have had the same problem. They say the alternate downloads could be the problem, or the CD, and that I should use the UNetbootin application. I guess I should start with describing my build:
[code]....
I've tried:
1. Going to the DL page, DLing 64bit 10.10, and mounting the image to create a bootable CD (by the procedure offered on the DL page).
2. Using Unetbootin to create a bootable USB (this I did multiple tmes, with different versions: 10.10 64bit desktop, 10.04 64 bit desktop, and I'm about to try another DL except I forgot which one I'm using, but I'll find out in a bit )..........
View 9 Replies
View Related
Apr 3, 2011
I've been experiencing a problem when I try to install Ubuntu 10.10 and 11.04 on my girlfriend's notebook. In the middle of the installation process a window pops-up saying "[Errno 5] input/output error". This has happened with both versions and I can't get through it, no matter what.
View 5 Replies
View Related
Jan 18, 2011
Laptop: Compact Presario C706NR Notebook Pc. Ive just tried to install Ubuntu 10.04 and unluckily failed... Ive checked the hard disk and it has responded error: 1files. [Errno 5] Input/output error
I'm running it on a USB. at the moment im using it as my comp. my windows vista is gone. Id like to fully install any recommendations?
View 2 Replies
View Related
Jan 30, 2010
This is what I get when following the instructions to fix grub. I type in "grub-install /dev/sda" and that's the error I get.I'm trying to put Ubuntu or Mint on a Dell Mini 9 with 16gb ssd, but no matter what I do I cannot achieve this goal
View 4 Replies
View Related
Mar 5, 2010
I cant seem to install Ubuntu 9.10 at all. At 15% I get the following Error Message Input/output Error During Read On/dev/sda then I get the creation of swapspace in partition #5 of SCSI1(0,0,0) (SDA) Failed. Ive tried 6 times already. Im getting no sound at all. How can I change the screen resolution. 800 x 600 is the highest it will go. Im getting really discouraged with Ubuntu. Alot of people seem to have the same problems I am having but there is no solutions. I've checked the MEMTEST and passed, done a disk check and passed.
View 9 Replies
View Related
Jul 16, 2010
I am fully aware that these following photo's are not all required for a full understanding of my issue, but I will post them regardless. Checklist to see if my computer meets best results possible for the installation. Screenshot.jpg These photos showing here are where I plan on Installing Ubuntu
Screenshot-1.jpg
Screenshot-2.jpg
NOTE: The installation has started, but only to shortly be stopped by my error message.
Screenshot-3.jpg
This is my ERROR!!! message
Screenshot-4.jpg
No matter what I try to click on, the window simply ignores the command, regardless of the amount of times I issue the command.
View 1 Replies
View Related
Oct 13, 2010
I messed up my xorg file and now my pc wont start, when i boot ubuntu the display tells me that there is no input.
View 1 Replies
View Related
Jun 8, 2011
I was running an update on my computer (running Ubuntu 10.04 Lucid) and something must have been transferred incorrectly as every time I open synaptic, I get an error message that tells me to type a command into the terminal:
Code:
sudo dpkg --configure -a
After doing that, it displays this:
[code]....
View 7 Replies
View Related
Mar 28, 2011
when iam opening my dec_backup folder the folling error is appering :
the error is gzip :stdin:input /output error
/bin /gstar :unexpected EOF in archive
/bin /gstar: error is not recoverable :exesting now
View 1 Replies
View Related
Nov 19, 2010
Today went from jaunty to koala then to lucid. The package manager doesnt work nothing works in terminal for apt-get or anything getting the message ---->
View 1 Replies
View Related
Jun 25, 2011
Quote:Error benchmarking: helper exited with exit code 1: Error reading 27099136 bytes at 2509258752 from /dev/sda: Input/output errorthis issue is also preventing me from making a copy/backup of the partition with gpartedwhich i decided i should do since i had a scare when booting todayunable to mount / i said fix itthen it said /var was not readyi waited it became readyi am running 10.04.2 would upgrading the kernel to get trim support fix it?
Code:
sudo fsck -t ext4 /dev/sda1
fsck from util-linux-ng 2.17.2
e2fsck 1.41.14 (22-Dec-2010)
System: clean, 247383/983040 files, 1394162/3907803 blocks
Solution: drive is under warranty and it needs to be used this is not software problem
View 5 Replies
View Related
Jun 9, 2010
I have dir in my HD that is very important to me,but when I try cd commad to go in the dirI got this message:cannot access `./Lab': Input/output erroralso when use ls to view the currently dir and the other dir's also I got this message:"ls: cannot access Lab: Input/output errorLab"with touch:touch: cannot touch `Lab': Input/output errorwith mkdir:mkdir: cannot create directory `Lab': Input/output error
View 3 Replies
View Related
Jun 8, 2010
I'm trying to setup a network with a bridge on Debian Lenny (too bad most bridging information is for 2.4 kernel, maybe I'll write some if I get this to work). I've seen somewhat similar problems involving bridging for VMs and a couple involving Fedora, but people say that it was either a driver problem or it was fixed magically.I'm using a few Intel Pro 100s, which I'm pretty certain have had driver support in the kernel for years now. Magic doesn't happen.Here's /etc/network/interfacesQuote:
auto loiface lo inet loopbackauto br0
iface br0 inet staticbridge_ports eth0 eth1bridge_maxwait 0address 70.168.186.252netmask 255.255.255.254gateway 70.168.186.1
[code]....
View 1 Replies
View Related
Mar 10, 2010
I use the growisofs command from the terminal to do most of my burning. Mostly because i burn almost the exact same type of file every time so its pretty easy to set up. I've done this dozens of times and never once had a problem before. I loved it because it was so much simpler than doing this in windows where i would need to install a few extra programs and codecs. That was up until today where it started failing every single time i tried to burn something.
For some reason every time i try to burn a disc it gives me this error message:
Code:
I'm really at a loss as to why this is happening. Every thread i found that discussed this problem was mostly focused on k3b or brasero and never really answered the question. As far as i know nothing has been updated since the last time i burned a disc a few days ago. Everything is exactly the same as it was when it worked. The only thing i could think of that might have caused this sudden failure is that i flashed the firmware of another cd drive using the same sata port that this drive is currently plugged into, but that was in windows so i dont see how it could have affected this drive.
View 1 Replies
View Related
Mar 20, 2010
Code:
ubuntu@ubuntu:~$ ls -al /etc | grep resol
ls: cannot access /etc/mtab: Input/output error
ls: cannot access /etc/resolv.conf: Input/output error
[code]....
Quote:
Code:
ls: cannot access /etc/mtab: Input/output error
I don't like the look of this at all!
View 6 Replies
View Related
May 2, 2010
The title is pretty self explanatory, I was just wondering how to overcome this error, if I can...
View 9 Replies
View Related
Jul 23, 2010
I installed Ubuntu 10.04 two days ago and was using my 1tb passport external HDD with it to download and store files. However today whenever i try and copy/cut and past to the HDD i get this error message..
Error opening file '/media/My Passport/test.avi': Input/output error This is obviously very fustrating and i want to stay with Linux but i do need to fix this problem else im afraid im going to have to back to awful windows.
View 4 Replies
View Related
