i tried to rip a dvd last night and it got 98% done then said "Data could not be written (Input/output error)"here is the error log from brasero
Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1744)
BraseroDvdcss called brasero_job_get_action
BraseroDvdcss called brasero_job_get_action
[code]....
I don't know the format of these old floppie disks, ive tried
Code:
PC8-248suse:~ # file -s /dev/fd0
/dev/fd0: ERROR: cannot read `/dev/fd0' (Input/output error)
how i can go about reading this data?
I want to install Xubuntu 10.10 x64, but it does not work. While copying data the setup tells me about an Input/Output error, but i don't think there are hardware errors.
The environment:
AMD Phenom II 1055t 6x2,8 Ghz
2x 2gb ram
Hitachi 1TB hard drive
Two partitions: 1st for Windows 7 Ultimate (NTFS), 2nd for my Data (NTFS)
So I decreased the size of the data partition and created two new partitions beside the Win7 partition and the data partition. The first is ext4-journal (20gb) the second is Swap (4gb). I've done that all by the Xubuntu setup.
I've downloaded the image from the german mirror (TU Chemniz) and checked the integrety via SHA1. Checksum was correct. I also checked the data after burning.
when iam opening my dec_backup folder the folling error is appering :
the error is gzip :stdin:input /output error
/bin /gstar :unexpected EOF in archive
/bin /gstar: error is not recoverable :exesting now
Today went from jaunty to koala then to lucid. The package manager doesnt work nothing works in terminal for apt-get or anything getting the message ---->
View 1 Replies View RelatedQuote:Error benchmarking: helper exited with exit code 1: Error reading 27099136 bytes at 2509258752 from /dev/sda: Input/output errorthis issue is also preventing me from making a copy/backup of the partition with gpartedwhich i decided i should do since i had a scare when booting todayunable to mount / i said fix itthen it said /var was not readyi waited it became readyi am running 10.04.2 would upgrading the kernel to get trim support fix it?
Code:
sudo fsck -t ext4 /dev/sda1
fsck from util-linux-ng 2.17.2
e2fsck 1.41.14 (22-Dec-2010)
System: clean, 247383/983040 files, 1394162/3907803 blocks
Solution: drive is under warranty and it needs to be used this is not software problem
I have dir in my HD that is very important to me,but when I try cd commad to go in the dirI got this message:cannot access `./Lab': Input/output erroralso when use ls to view the currently dir and the other dir's also I got this message:"ls: cannot access Lab: Input/output errorLab"with touch:touch: cannot touch `Lab': Input/output errorwith mkdir:mkdir: cannot create directory `Lab': Input/output error
View 3 Replies View RelatedI use the growisofs command from the terminal to do most of my burning. Mostly because i burn almost the exact same type of file every time so its pretty easy to set up. I've done this dozens of times and never once had a problem before. I loved it because it was so much simpler than doing this in windows where i would need to install a few extra programs and codecs. That was up until today where it started failing every single time i tried to burn something.
For some reason every time i try to burn a disc it gives me this error message:
Code:
I'm really at a loss as to why this is happening. Every thread i found that discussed this problem was mostly focused on k3b or brasero and never really answered the question. As far as i know nothing has been updated since the last time i burned a disc a few days ago. Everything is exactly the same as it was when it worked. The only thing i could think of that might have caused this sudden failure is that i flashed the firmware of another cd drive using the same sata port that this drive is currently plugged into, but that was in windows so i dont see how it could have affected this drive.
Code:
ubuntu@ubuntu:~$ ls -al /etc | grep resol
ls: cannot access /etc/mtab: Input/output error
ls: cannot access /etc/resolv.conf: Input/output error
[code]....
Quote:
Code:
ls: cannot access /etc/mtab: Input/output error
I don't like the look of this at all!
The title is pretty self explanatory, I was just wondering how to overcome this error, if I can...
View 9 Replies View RelatedI'm trying to install ubuntu 10.04 on my desktop. I would like to erase my old xp completely and have only ubuntu as my OS. I boot from cd but when I install it stops at 15% and keeps giving me this error:
Input/output error during write on /dev/sda.
It won't let me retry or ignore and when I cancel the installation continues until I get another error.
I installed Ubuntu 10.04 two days ago and was using my 1tb passport external HDD with it to download and store files. However today whenever i try and copy/cut and past to the HDD i get this error message..
Error opening file '/media/My Passport/test.avi': Input/output error This is obviously very fustrating and i want to stay with Linux but i do need to fix this problem else im afraid im going to have to back to awful windows.
I'm having some trouble installing Ubuntu 10.04. What I am trying to do is completely wipe all things on my computer and install Ubuntu. I have followed the instructions from Ubuntu's homepage on how to download the ISO, and ran their program to put it onto a portable USB device. Through doing all of this, I receive no error messages. Then it tells me to change the BIOS to boot from USB, so I did that. I've successfully accessed the install menu and filled in all the information requested (i.e. computer name, account name, etc.). I select that I want to delete the current partitions and use only Ubuntu. It starts to install, but at 67%, while copying files, I receive an error.
This error is:
The installer encountered an error copying files to the hard disk:
[Errno 5] Input/output error
This is often due to a faulty CD/DVD disk or drive, or a faulty hard disk. It may help to clean the CD/DVD, to burn the CD/DVD at a lower speed, to clean the CD/DVD drive lens (cleaning kits are often available from electronics suppliers), to check whether the hard disk is old and in need of replacement, or to move the system to a cooler environment.
I got interested in it when trying to play Windows games on my Mac. I've tried WINE and didn't get anywhere fast, but thats another thread for a different forum.
For now I'd like to try Ubuntu. I downloaded the ISO and burned it to a DVD and a CD.
When booting up my computer I get this message:
I have no idea what this means. I've tried to find answers on this forum with no luck.
The computer in question:
iMac8,1
Intel Core 2 Duo
3.06 GHz
4GB Memory
NVIDIA GeForce 8800 GS (512 MB)
MacOS 10.5.8
I just received a 1TB external(Western Digital) hard drive(NTFS) for backup purposes. I'm using an Ubuntu Live CD, and an external hard drive dock. I am transferring over esata and am receiving the error:
Code:
Cannot open file: input/output error
Seems strange that it said "open". At any rate only about 60 of the 200+ GB were able to be transferred over...this won't do. I have tried to copy via CLI using
Code:
cp -r
and received the same issue. For clarification I am attempting to transfer from a mounted partition onto the mounted external.
Asus EEEPC 1215P
Intel Atom N550 1.5 GHz
2 GB DDR3
Ubuntu 10.10
Maverick Meerkat
Desktop Edition
Tried changing BIOS setting...
SATA Run Mode configuration
Enhanced AHCI
Enhanced IDE
Compatibility
Disabled
non of them worked
My dad is out of town for a while, so I've been using his computer to rip my DVDs with Handbrake. He has Windows Vista installed, so I did a full installation of Fedora 13 on a thumb drive and just run everything off of that. However, when I went to delete some of the encoded videos after I had moved them to my computer, I got a system error that said 'can't delete files: I/O error.' Now, if I try to boot up Windows, his computer is stuck on a black screen checking a bunch of dlls. He'll be back in a couple of weeks, so I'd like to have it fixed by then.
View 2 Replies View RelatedCan't copy DVD with dd - Input/output error
Code:
kevin@orangebox:~$ dd if=/dev/dvd of=~/Videos/backup.iso bs=2048 count=4169919
dd: reading `/dev/dvd': Input/output error
191160+0 records in
191160+0 records out
391495680 bytes (391 MB) copied, 154.38 s, 2.5 MB/s
We are running an C++ application in AWS EC2 instance (CentOS 5.4) mounted with an EBS Volume (say /mymountpoint). We do more simultaneous writes to the EBS Volume from our application. But at some point we get 'ERROR: Input/output error'. After this, 'ls -l /mymountpoint' command itself fails with the i/o error. The filesystem which we use for the EBS Volume is xfs. I unmounted the drive and done xfs_check and again mounted the drive. Now, everything seems to be working fine. But the issue still persists everytime when we do simultaneous writes.
I believe the following details will be useful,
[root@domU-12-31-39-07-81-36 StoreGrid]# cat /etc/redhat-release
CentOS release 5.4 (Final) .....
Output of dmesg :
SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
Filesystem "sdh": Disabling barriers, not supported by the underlying device
XFS mounting filesystem sdh
Ending clean XFS mount for filesystem: sdh .....
Starting XFS recovery on filesystem: sdh (logdev: internal)
Ending XFS recovery on filesystem: sdh (logdev: internal)
The XFS utilities are in v2.9.4
I got a new HDD like a Storage on my Ubuntu ,it is formated as ext3 and i am able to mount it ,but sometimes while downloading from FTP ,when the session broke Ubuntu crates some ./afternature.mp4 Input/output error ,which i can see on "ls -l" ,and that causes great troubles to me ,because i can not copy or write on that disk another file with the same one which is created like this ,these error are gone only if i format the hdd .
My mounting command is "mount /dev/hdb3 /tmp/hd ext3 rw 0 0" So is that possible to remove these error without formatting the disk . PS:I did a lot of search for that error ,on unix forums also here but i didn`t find a concrete answer ,i found a thread which is for that case but removing with inode is impossible because on ls -l i`m not receiving the inode .
I am trying to install v 10.04.1 and it works up till 34% and then it gives me that error. So annoying and i don't have any other OS's.
I am posting this from a bootable 9.10 CD which doesnt even partition right.
I have a 64 bit CPU but i downloaded 32 bit ubuntu.
I've managed to boot up ubuntu-10.10-desktop-amd64 using PXE, but when the installer is copying the files it fails. I've md5sum checked the iso and it is OK.
Quote:
This is often due to a faulty CD/DVD disk or drive, or a faulty hard disk. It may help to clean the CD/DVD, to burn the CD/DVD at a lower speed, to clean the CD/DVD drive lens (cleaning kits are often available from electronics suppliers), to check whether the hard disk is old and in need of replacement, or to move the system to a cooler environment.
The trouble I'm having is that when I load a bootable USB/CD of 64bit 10.10, I always get an error that looks a little like: "(initramfs) mount: mounting /dev/loop0 on //filesystem.squashfs failed: input/output error. Can not mount /dev/loop0 (cdrom/casperfilesystem.squashfs) on //filesystem.squashfs." I've done some googling and I've noticed people have had the same problem. They say the alternate downloads could be the problem, or the CD, and that I should use the UNetbootin application. I guess I should start with describing my build:
[code]....
I've tried:
1. Going to the DL page, DLing 64bit 10.10, and mounting the image to create a bootable CD (by the procedure offered on the DL page).
2. Using Unetbootin to create a bootable USB (this I did multiple tmes, with different versions: 10.10 64bit desktop, 10.04 64 bit desktop, and I'm about to try another DL except I forgot which one I'm using, but I'll find out in a bit )..........
I was given a CD for work purposes and when I put the disc into the drive I get 2 disc icons on my desktop. One has data (a pdf file) and the other has serveral audio tracks. I tried to use dd to image the disc but it gives an input/output error immediately without copying anything. If I try to use brasero or k3b to copy the disc it only copies the audio portion. The data portion does not show up in the drop down to copy - only the audio. If I right-click the data (or audio) desktop icon and select 'copy' from the shortcut menu then it creates an image of the audio portion.
for dd i tried:
dd if=/dev/cdrom of=/home/username/test.iso
This give an immediate error with no data written to the iso file.
dd if=/dev/cdrom of=/home/username/test.iso bs=2M conv=notrunc,noerror
This copies a small amount of data to an iso file but it wasn't usable.
So, I recently installed, or.. ermm.. Tried to install Ubuntu 11.04, I did it with a CD. This is about my 4th time around with Ubuntu, so I'm not completely new to it. But, I used to have Windows 7 on here, and I decided I wanted to go with Ubuntu, so I downloaded and burned the CD, and did all the stuff you need to do to install Ubuntu. I got far into the installation, and then the installer crashed saying something about an Input/Output error, and it could be the CD being dirty or damaged.
Now, I'm stuck with a broken operating system because I chose to replace my Windows 7 partion with Ubuntu, and there's no terminal! Everything else seems to be here, it's just really buggy, and I can't get much of anything installed.
Everytime I attempt to Install Ubuntu or Mint, I get the above error and I am unsure as to why it keeps happening. I read on other forums it can be due to your optical drive so I tried 4 different burners and 3 different types of CD's.
I know they work fine because I use them for other PC's. I've used them on windows XP, Vista, 7 and Mandriva Linux without a single problem. It's only when attempting to install Ubuntu or Mint that I get these errors and it happens every time.
In the error it also mentions that their may be a problem with your HDD, but I've used that HDD for windows xp through its whole life, I only just reformatted earlier in an attempt to install Linux.
I even threw some video DVDs at it to make sure it wasn't the disc.
Code:
[pickens@acer1 Videos]$ dd if=/dev/sr0 of=POTC.iso
dd: reading `/dev/sr0': Input/output error
5088+0 records in
[code]....
I am getting the same thing on my laptop running Mandriva, oddly enough. Two different drives, two different computers, two different distros and multiple DVDs.
When running rsnapshot tonight it failed with a bunch of
cannot remove `file': Input/output error
errors.
I navigated to the directory and tried to delete it manually and I got the same errors. I tried with 'sudo rm directory'. How else can I delete this directory? What would cause a situation like this?
I'm either missing the obvious or have four identically defective tape drives. Each is a Seagate or IBM Travan drive (yes, I know they're old and I need to access the data; they were in Win boxes) using QIC-80/DC-2120 media. I've been trying to solve this using three Fedora boxes (different versions) and one Debian machine.
The OS's recognize the drives and they show up as /dev/st0.
With no media in the drives, I get a status report; with media inserted, I get the same input/output errors.
Examples (all as root):
With tape inserted:
With no tape in drive:
With tape inserted
Everything I've found on Google suggests that the drives are defective.
I wish to know what could be the possible cases for this error:cp: reading `filename': Input/output errorI am getting this message when I am trying to copy a big file of around 50MB.
View 2 Replies View Related
