I' trying to uninstall nicotine+ 1.2.14 with no success. I first noticed there was something wrong when everytime I install a package there was an error with nicotine+.I've tried to uninstall it many times but the setup is interrupted.Is there a way to uninstall this manually? I was using Jaunty 9.04 and recently upgrade to Karmic 9.10I'm using a Compaq Mini 311c 1020SA Netbook.
View 1 RepliesUsing Nicotine+ I accidentally downloaded about 11000 files from an user who's evidently too busy to properly organize his archive, and got all his stuff stored in only one big folder.
Nicotine obviously crashed, and I'm not able to open it anymore. When I launch the program, it immediately freezes, and I can do nothing but force its quit. I tried to remove and reinstall the program, but the problem persists. So I was wondering if there's a way to remove the downloads from the list outside Nicotine, editing some files.
I've recently installed Nicotine+ (v.1.2.14 edit: v.1.2.15 doesn't work either) and cannot connect to either the old server (port 2240) or the new server (port 2242). Nicotine seems to get stuck with the message, "connected to server server.slsknet.org:2240, logging in..."
I've tried museekd and the related clients as well (Murmur and Museeq+) and neither of those seem to be able to connect as well. Neither does any version of soulseek I've tried to run in wine (157NS13c, 157NS13e, 156c), though I allow that that could be a different problem entirely.
I don't believe it's a problem with my ports because I can connect to soulseek on my windows machine with no extra setup, and the ports I use pass the port status test within nicotine+ itself.
(ubuntu 9.10 on Dell XPS m1530) Yesterday i shut down my (working) nicotine+ 1.2.12 and today it came up with a gray screen. When running it from the command prompt it gives following output.
Code:
/usr/lib/pymodules/python2.6/pynicotine/gtkgui/frame.py:346: DeprecationWarning: Use the new widget gtk.Tooltip
self.tooltips = gtk.Tooltips()
/usr/lib/pymodules/python2.6/pynicotine/gtkgui/frame.py:347: DeprecationWarning: Use the new widget gtk.Tooltip
[Code]...
I'm running Ubuntu 9.10 on an HP desktop. I listen to a lot of music and sometimes I can't always find what I want, so I use Nicotine+ (a Soulseek client) to find more obscure stuff. I also use it because it lets me see what bit-rate the files are.Today I entered in the search bar: "the tired sounds of stars of the lid". I would get search results, but I would also get this nasty little message in the logbelow:"pynicotine.slskmessages.FileSearchResult unpack requires a string argument of length 4"After many of these messages show up in my log, Nicotine+ immediately closes.I have absolutely no idea what's happening here.
View 2 Replies View RelatedFrostwire and Nicotine + they both have outdated RPM's for 10.x that dose not support 11.3. They have newer .deb files. What would I have to do to install a .deb file. Navigate to the file using CD (change dir) and then? Model: Toshiba L505-ES3045 (Intel i3, 4gb Memory, OpenSuse 11.3/Windows 7, Intel HD Graphics)
OS: OpenSUSE 11.3 Prior OS's: Mac OS/X11/Fink/Windows XP/Vista/7.
I cannot uninstall Firefox, nor can I uninstall Chromium; one always stays if the other is uninstalled. For example, if I remove Firefox, Chromium will appear in its place and vice versa. This has got to be one of the weirdest bugs I've ever seen on Ubuntu! So, how can I uninstall both web browsers?
View 6 Replies View RelatedI am trying to uninstall my LAMP server and my Drupal 7 installation. Unfortunately I cannot find any instructions on uninstalling Druapl from my system. The ones that exist are far too old( < 2008 ) to be relevant. Could someone please direct me how to go about this? Note: I did not use Synaptic for installation. I downloaded the file from the drupal.org site.
View 1 Replies View Relatedi got opensuse 11.2 (gnome) and created a hidden volume with truecrypt on it. i would like to install nicotine on the hidden volume now,an only run nicotine while it is mounted. i only know how to install stuff with yast, i have no idea how to handle the terminal. i tried but its more like stumbling around. yast always puts the program into the standard menu where i dont want it to be. and by the way,how to disable the autostandby on my monitor? i tried already, but it didnt work)
View 4 Replies View RelatedI installed Ubuntu 10.04 LTS together with my Windows 7... My Question is: How do i uninstall Ubuntu without affecting my Windows Partition
View 3 Replies View RelatedI wanna uninstall my ubuntu.
View 6 Replies View RelatedMy problem started with DVDrip and I mad an apt-on-cd DVD and installed from there rather than download the packages for my twop systems running karmic. I don't know what has happened but now if I try to install/upgrade/remove anything i get the following.
Code:
The following packages have unmet dependencies:
libevent-execflow-perl: Depends: libanyevent-perl but it is not going to be installed
E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).
[Code]...
Unlike previous versions, Ubuntu 10.04 do not lists ADD/REMOVE programs under its Application Menu!?
What's the way to uninstall programs? I know about adding new ones through Ubuntu Software Center!
I've installed xubuntu 10.10.is there a way to uninstall it completely?
View 9 Replies View RelatedI installed Ubuntu 10.10 along with my Windows 7 operating system. After quite a bit of trial and testing, I've decided to remove Ubuntu. I probably did this incorrectly, but I deleted the Ubuntu partition from within Windows 7 partition manager. The next time I booted the system, the computer tried booting with Grub and failed due to not finding the partition.I've since reinstalled Ubuntu just to be able to dual-boot again. How do I cleanly remove Ubuntu and the Grub boot manager?
View 4 Replies View RelatedSo this all started I made a video in PiTiVi and wanted to upload it to ....., that didn't go well so I looked around and found out that transmageddon is what I needed to convert the file into one acceptable for ..... and this is were it gets fun.So the install gets stuck at 58% for like 6+hours so a restart the computer boot back in it says it's not install so I try again to install it and it says blah blah it never finnished installing so I try to sudo apt-get remove transmageddon says I need to sudo dpkg --configure -a so I do then I try again
Oops@crap:~$ sudo apt-get remove transmageddon
Reading package lists... Done
Building dependency tree
[code]....
I'm trying to unstall Ubuntu 10.4 in a hd from a live Cd. The problem that I have is that even though I can reach the menu screen when I select even the options Install or Use without changes the sistem shows the ubuntu logo page with the little dots below changin colors but It won't go any further.
View 2 Replies View RelatedI dual boot with XP, My upgrade to 11.04 has been two weeks of FUBAR. I want the 10.04 LTS again. With the 10.04 disk in, I get to the point of "Prepare Disk Space"; it shows XP-pro 81Gb and Ubuntu 11.04 75Gb. There I must choose side-by-side, Use Entire Disk, or Specify partitions Manually. My Question/Problem> The new 11.04 kernel seems so incompatible with my system that I wonder if I need to delete or reformat. Am I likely to have success if I just tell it to do side-by-side.
View 3 Replies View RelatedI want to uninstall Ubuntu and then install F10 but I cannot get any info on how to achieve the former.
View 4 Replies View RelatedI'm afraid that if I delete the partition Ubuntu is on it'll mess up GRUB and I won't be able to boot into Windows. here's the link to what my partitions currently look like: [URL}...
View 5 Replies View RelatedHow would I go about un-installing ubuntu under these circumstances?
-Dual-Booted
-wubi-uninstall.exe not working
-On same partition as windows and cant format
In my case, getting fed up with Lucid's flaky behaviour with my particular display, having tried various solutions that were really only half-baked workarounds (the best being to install a mainline kernel) - I decided to install Peppermint Linux next to Ubuntu, thus creating a dual boot system. But I've decided I don't really like Peppermint Linux. Further, in the meantime, I've found a workaround for Lucid which (so far) seems like a longer term solution (I installed Kernel xxxx?-22, while increasing my display's refresh rate - and now all is hunky-dory - it starts perfectly, with a 'normal' visual effects desktop, and even Cheese no longer crashes the system with my old webcam).
Now here's the rub....
How to (a) uninstall Peppermint Linux (with its Grub - which was obviously set over Lucid's) (b) reclaiming the whole hard drive (it's only 40gb total - as it's an oldish machine) for Lucid - without having to reinstall Lucid, which I now have very nicely set up indeed, albeit currently squeezed for space? Is there some nice patient geek out there who can put me out of my misery with a step by step guide? I've tried Google - but everyone with a similar problem seems to want to reclaim the space for Windows!
i have an hp laptop currently dual booting ubuntu 10.04 and windows xp. i want to install windows 7 on the windows xp partition of the hard drive. to do this do i insert my win 7 disk while running xp and load the installer from there or i need to uninstall ubuntu and then reinstall it after putting win 7 on? or whats the easiest way to put win 7 on without messing up or involving the ubuntu partition?
View 3 Replies View RelatedI recently performed an online update from 9.10 to 10.4 LTS. Unfortunately, the install did not go very well because Bonager cannot be removed; hence the package system is left in an inconsistent state. Attempts to remove Bonager using apt-get does not work.
At this point, I'm thinking that I'll need to perform a fresh install, starting from scratch.
I have had ubuntu on my PC for a number of years, but its getting slower and slower so I have decided to uninstall in and maybe put xbuntu on instead, how do I get rid of it without killing my xp partition?
View 3 Replies View RelatedI installed ubuntu by using Wubi to try it out. When I restatered and booted up ubuntu it said claimed to be finishing up installations which was taking nearly 1.5 hours of getting nowhere before I got frustrated and shut it off. I wen't back on windows to see if a re installation would be better. But my computer didn't seem to agree on that and wouldn't uninstall it. So I manually deleted the files myself. Now when I start up my computer I still see the choice to boot up kubuntu but yet there is no kubuntu if I select it. Any ideas how to get rid of the selection and why wubi didn't work? Not even live CD's are working on my computer.
View 1 Replies View RelatedHave the same problem and can't uninstall, seemingly due to circular dependencies among firefox, firefox-3.0, firefox-branding and firefox-3.0-branding. how to break out of that?
[code]...
how to uninstall a video driver from Ubuntu 10.04?
View 1 Replies View RelatedI am trying to update my bandwidthd but it says that i should reinstall it, but when i do that it just throws me an error. I am running Ubuntu 10.04 in case it helps. I am getting really frustrated by this and don't know to fix it because it wont let me uninstall, reinstall, upgrade, or update.
View 9 Replies View Relatedi have done a "wubi" installation of ubuntu 10.10 in my F: drive of HD.But the installation got some errors and now i wan to uninstall the ubuntu without losing my other data in F: drive.i have tried uninstalling it from "add or remove programs" in control panel of woindows XP but there is no program as ubuntu in it.
View 1 Replies View Related