Ubuntu Installation :: Can't Upgrade From 9.04 / My System Is 'up To Date'
Feb 12, 2010
I run three Ubuntu machines - work, home, and a laptop. All were on 9.04, and I was able over the past week to painlessly upgrade the first two to 9.10.Today I fired up the laptop for the first time in a while and saw that it hadn't had the upgrade yet, so went to the upgrade manager. It had a bunch of package upgrades it wanted to do, so I let it. But there was no option to go to 9.10, not even after catching it up on updates. It just says the system is up to date. Clicking "check" again just gives the same message. It doesn't seem to know that there's a koala out there.
Settings on the update manager say to accept normal releases, so it's not an LTS thing. Yes, it's on 9.04 now according to /etc/apt/sources.list. Network connectivity is good.What might I be missing that I ought to look for?
View 7 Replies
ADVERTISEMENT
Apr 23, 2010
when i am tryg to upgrade to lucid from karmic, update manager starts and shows my system is up-to date. command used "update-manager -d"os karmic 64bit.
View 2 Replies
View Related
Apr 5, 2010
is there any method to know the date of the installation of the system?
View 2 Replies
View Related
May 6, 2010
I thought I was removing the chat status piece of the indicator applet (I know what it is now, didn't then), but I accidentally removed the whole thing. Now when I figured out how to put it back on the panel, I can't get it back to where it was (which was to the RIGHT of the system date/time applet). How can I do this as well as move the indicator applet that has the volume control in it?
View 4 Replies
View Related
Apr 22, 2010
Was curious about keeping a running system up to date. Can any harm come from running the following:sudo apt-get updatesudo apt-get upgradeWhat I mean is, is it possible that doing the above could cause a perfectly healthy system to go foobar? If so, what's the best way to prepare a system for a recovery. The Server in question is a Hardy BIND server. In the past, I've seen some ugly things happen to Windows systems after running updates, so I'd like to err on the side of caution.
View 1 Replies
View Related
May 26, 2011
I upgraded from fedora 14 to fedora 15 yesterday. I live in India (IST) which is GMT +05:30. Every time I boot, my system clock increases its time by 5 and a half hours. For example, system clock on my machine is now Wednesday May 26,2011 22:44. If I were to reboot now, the time I would get is Thursday May 27, 2011 04:14. How do I correct this?
View 14 Replies
View Related
Aug 12, 2010
The 7 series is too old to have support, I am told that 7.10 is available,but of course if I try an update I find they are offline. I have the 10.4 Live CD and it hangs after:
Quote:
init: ureadahead-other main process (n) terminated with status 4
init: ureadahead-other main process (n+1) terminated with status 4
* Setting sensors limits I added boot options:
Quote:
nomodeset irqpoll rhgb My system is dual boot with XP running grub (too old for grub2) I have no problem wiping the system(was not booted in ubuntu for 839 days, so what could I need?)
View 9 Replies
View Related
Nov 4, 2010
i have noticed that the apps in the suse repos are kinda out-dated,like banshee is 1.6.0 while the latest is 1.8 same thing for amarok and some stuff,so am trying to keep all the packages up to date from the repositories,i added most of the repos and factory types that should make the system up to date,but to no avail.
updating the system and the application ?
PS i also added the 3 repos for kde 4.5 sc to update to 4.5 but still i didn't receive any update notice from the software manager.
View 7 Replies
View Related
Nov 29, 2009
I have SLES 11 and activated the daily updates.
But i don't know if the system :dowloads the updates
if the downloaded updates are immidiately installed
some updates need to reboot the system. does it automatically reboot or
does he(the system) inform me ? (where ?)
View 2 Replies
View Related
Mar 2, 2010
I upgraded several months ago from 8.04 to 9.10 and found my system slowed considerably.I thought I'd get used to it, but it just seems to really drag. I'd like some suggestions on how to downgrade or alternatively speed up the system (are there items I can "turn off" that can bring back the speediness of 8.04?).I'm considering wiping and re-installing, but getting my system back the way I want it is keeping me from doing that.
View 6 Replies
View Related
Mar 14, 2010
After successfully upgrading from 8.04 to 8.1 (where even my wireless worked for the first time) I got a system freeze when I tried to upgrade to 9.04.
I suspect the graphics driver but don't know how to upgrade without X running. After booting in generic mode (kernel 2.6.28-1 I can log in the shell but am lost without the GUI.
View 2 Replies
View Related
Mar 24, 2010
I was trying to upgrade to 10.04 (from 9.10 x86_64)when the update manager crashed without any warning or errors. it happened while the packages were being installed, as a result of which i could no longer login into gnome. so i logged in using the terminal and since i had cleaned the cache before upgrading i ran sudo -i dpkg *.deb (there were a large number of deb files in it, so i thought those were the upgrade packages) but the process couldn't be completed. it said that there were too many errors. after rebooting, gnome doesn't start and i can see lucid development version in the terminal. it also didn't detect my usb keyboard.do i have to reinstall ubuntu.
View 3 Replies
View Related
Sep 1, 2010
I'm currently experiencing a problem when trying to upgrade my system through aptitude (apt-get *). I can install programs, but whenever it tries do anything with the kernel I get this error:
E: linux-image-2.6.32-24-generic: subprocess installed post-installation script returned error exit status 2
This started about a month ago when I was trying to install some upgrade (with apt) which stalled and I unknowingly shut down the comp while it was running.
View 3 Replies
View Related
Mar 27, 2011
I talked a friend into trying Ubuntu, and installed it via wubi. So far, he likes it a lot, but today I checked his computer out, and saw that he had a lot of updates pending. There was a kernel update, openoffice, grub, the whole lot. So, I started the update, and, when it finished, the system froze.
I restarted the PC, but now Ubuntu says that the root partition is not ready. When I open a diagnostic shell, it says "Root filesystem check failed". However, an fsck works just fine, and I can see all the files in both Ubuntu and Windows.
There's only one real disk, as far as I can see, /dev/sda1, and it's the Windows disk. The Linux root is a /dev/loop5 which points to a file under Windows. I suppose it's the wubi way, although I'm not familiar with that.
There's a possibility that the Windows disk had errors while I was running Ubuntu; in fact, Ubuntu said something to the effect while booting the first time it failed.
What can I do to boot normally?
View 9 Replies
View Related
May 13, 2010
Lucid 10.04, auto upgraded from 9.10, accessed through NoMachine NX from my MacBook Pro 10.6 system.
When I try to access the time settings through the System > Administration > Time and Date menu, all I get is the greyed-out display with the message Not authotized to make changes at the bottom.
With other administration functions, I am asked for sudo-style authorization with my password. That doesn't happen with Time and Date.
View 2 Replies
View Related
Nov 4, 2010
is there a way in terminal to rename a file to system date?
View 2 Replies
View Related
Aug 19, 2011
I want to change the Date and Time of the system from my application. This can be done using the "Date -s" linux command. But the application has to be executed as root/sudo. is it possible that root can give permission to normal user to execute the "Date -s" command?
View 9 Replies
View Related
Jun 17, 2009
I try to install Fedora 11 from DVD BUT after installation system is not booting. Windows XP is a 1st OS is already installed in my system.
View 1 Replies
View Related
Mar 10, 2011
I want to try Linux on a 5yr old desktop, What is the best and up to date Linux to install.CPU-AMD Sempron(tn)3000+,CPU Speed-2000MHz/333MHz, Ram 1.5G
View 8 Replies
View Related
Aug 15, 2010
How can i get date from system in c language
View 4 Replies
View Related
May 2, 2010
I have an AMD64 system, which I recently upgraded to Lucid 10.04. The system now fails to boot after the upgrade. Recovery mode makes no difference.
When I attempt to boot, I get a series of messages about file systems needing checking, and also some messages from ureadahead-other. (process terminated status 4), though a post here says that status 4 is in fact not an error.
I have sucessfully booted the Lucid desktop install CD in live CD mode, mounted the filesystems, and started parts of my system in a chroot. In that system I tried running an update, and removing plymouth, but it made no difference. how I can get my system working.
I did take a backup of /etc before I upgraded, so I could get back to a karmic install, but the pain in doing so would be considerable, so I would prefer to avoid that if possible.
View 5 Replies
View Related
May 4, 2010
I've just reported a launchpad bug report about my desktop system being unbootable after upgrade to lucid lynx. [URL]... I opened this thread to ask if someone else experienced a similar problem and for collecting information and workarounds (none yet) about this quite serius problem. The system has an nvidia graphic card and proprietary drivers were installed before the upgrade. However I'm not sure the problem is related to this. FYI, the system booted regularly from a usb stick with ubuntu lucid lynx. SO the problem is in the upgrade path.
View 9 Replies
View Related
May 4, 2010
I tried running an upgrade from 8.04 LTS to 10.4 last night, and things seemed to be going smoothly. The upgrade progress was nearly complete, and I wandered off for a while to let it run. When I came back, I had nothing but an orange screen and and unresponsive system. I left it alone all night with the hopes that something would happen, but this morning nothing had changed so I hard restarted the system.
Ubuntu 10.4 appears in GRUB, but the system cannot boot and exits with a kernel panic and the message "vfs unable to mount root fs on unknown-block" I was able to boot to a 10.4 LiveCD, and I can browse all of my files from there. What can I do to get this system back up an running? I have dozens of user account and a lot of customization (it acts as a webserver with a wiki for a gaming website running on it, among other things), so I really really don't want to do a fresh install and lose all my data and customizations.
View 9 Replies
View Related
Sep 20, 2010
I have an MSI U100 netbook triple booting between Win XP, Ubuntu 9.04 and OSX. Grub is used as boot loader. I want to upgrade my ubuntu install but I am a bit scared that grub will be messed up.
View 1 Replies
View Related
Oct 11, 2010
I upgraded from 10.04 to 10.10 a few hours ago using the alternate CD. I selected not to download files off the internet as I wanted to do that at a later stage. After running for close on an hour performing the update, as it reached the end it gave me a message saying the update had failed and the changes will now be restored (or something like that). I clicked ok, and the update window closed. I then restarted the pc and it stopped at the splash screen. Now I cannot get it to load the desktop environment. It Jst sits at the splash screen. Pressing the power button shuts it down normally, but alt-ctrl-f1 does not open a shell.If i start up using recovery mode and then select fail safe graphics mode something comes up about a segmentation fault in xserver in I then end up at the shell where I can work from the command line, but can never get the graphical interface to work.
View 8 Replies
View Related
Nov 22, 2010
Just upgraded to 10.04 from 9.10. upgraded from update manager. System would not boot. Booted live cd and used the 9.10 menu.lst. Now boots but takes a long time. I don't know much about the kernel. I assume they are listed in the /boot directory and are called by menu.lst (dual boot w/ XP) (btw: I am ready to get rid of XP once I get this fixed). 9.10 appears to use 2.6.31-20-generic, therefore, I assume 10.04 uses 2.6.32-25-generic.
View 3 Replies
View Related
Nov 29, 2010
After my upgrade the bootup seems to take a long time.I am dual booting with XP.From the boot menu when I select Ubuntu it takes 35 seconds before I get the login screen.Is this normal?Also, other apps seem to be running slow. Running Win 7 under VMWare Workstation 7.1.
View 7 Replies
View Related
Apr 7, 2011
I have a Dell studio running ubuntu for two years now. I had ubuntu 10.04, but a few days ago, the update manager started to bug me that some stuff don't work properly and that I need to to a partial upgrade. I postponed that for a while, and all worked fine, but I finally had sometime and clicked "yes", all began collapsing:
1) the update manager crashed while updating.
2) I rebooted and ran it again. same crash at the same stage.
3) I decided, god knows why, to do a full upgrade to 10.10, which also crasehd.
Now it won't even boot. It always get stuck at a line saying "no IPv6 routers present" or something of that sort. when I switch off manually the wireless switch on the laptop, the boot gets stuck a bit earlier, on a line that says: "laptop login:"
EDIT: I just remembered something which might be important: I had a hibernation problem on the upgrade to 10.04, so I played around a bit with that. now it uses libgcrypt, and I remember I set up something manually then, but I can't remember what.
View 3 Replies
View Related
Apr 9, 2011
I tried to upgrade two hardy them to 10.4 lcui and failed miserably. after upgrading, both fail to finish rebooting process; they stuck at maintenance mode. are there ways to rescue them? something went very wrong...
View 2 Replies
View Related
Jun 5, 2011
After doing a complete backup, I ran the update overnight. Ubuntu 10.04 was on my computer the next morning. While poking around, I noticed that the Kontact KAddressBook had no entries;Instead, I had display with three columns;Column #1, "Address Books" had the cryptic entry 'std.vcf' Clicking on it did nothing. Apparently, all my addresses were gone. Solution: Finding and Reloading the Addresses My addresses were in the vCard format, located in
/home/MYUSERNAME/.kde/share/apps/kabc/std.vcf
After checking to see that my backup file of std.vcf was the same size as the system file, I did the following, modified from instructions provided by Joao G. Peixoto joaogpeixoto Within the Kontact KAddressBook, I deleted the empty std.vcf addressbook; Edit Delete Address Book Then I generated a new address book to hold my addresses;
File
New
Add Address Book
KDE Address Book (Traditional)
[code]....
The [next] command took me back to the 3 empty columns. In a minute or two, 'Names' (column 2) began to fill up with my old contact listings
View 1 Replies
View Related
