I have a freshly installed Ubuntu Karmic 32 bits installed in an old machine (Pentium 4 512 Mb RAM) and I'm having a severe problem with apt-get. No matter what repository I choose, I can't update the repository files. I get the following error during a
[Code]....
I have a freshly installed Ubuntu Karmic 32 bits installed in an old machine (Pentium 4 512 Mb RAM) and I'm having a severe problem with apt-get. No matter what repository I choose, I can't update the repository files. I get the following error during a apt-get update:
Hit http://br.archive.ubuntu.com karmic-updates/universe Sources
Hit http://br.archive.ubuntu.com karmic-updates/multiverse Packages
Hit http://br.archive.ubuntu.com karmic-updates/multiverse Sources
96% [4 Sources bzip2
[Code]...
I just installed Fedora Core 12 and when attempting use the update utility am receiving the following error:
[code]...
I just freshly installed Fedora 12 on my PC from a live CD. After finding the update button, It says I have 451 updates. When I go to update all of them a few seconds into the update I get a error message and it says this below. " could not add package update for abrt-plugin-runapp-1.0.8-2.fc12(i686)updates: abrt-plugin-runapp-1.0.8-2.fc12.i686 "
View 5 Replies View RelatedHere's the details to this mornings update error:
Error Type: <class 'yum.Errors.RepoError'>
Error Value: Error getting repository data for installed, repository not found
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in <module>
main()
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3122, in main
code....
It mentioned bug report but I don't know where that is. I'll try later.
I've just installed Ubuntu 10.04 netbook remix on an acer Aspire One D250, specs below: Processor Name: Intel Atom N270
Processor Speed: 1.6 GHz
RAM: 1 GB
Graphics Card: Intel Graphics Media Accelerator 950
Storage Capacity: 160 GB
I had to resize the win partition, making a new partition for Ubuntu of about 15GB. I then installed the system. Everything went without problems. I was able to boot once, and verified that everything worked as intented.
However, after that, 90% of the times I reboot the bootup process hangs at a blank screen (with a blinking underscore), immediately after grub selection. If I select "recovery mode" in grub I can see the bootup messages, but the process hangs, all except one time, right after:
Code:
[2.304418] ata2: DUMMY
[2.304487] ata3: SATA max UDMA/133 abar m1024@0x58344000 port 0x58344200 irq28
[2.304584] ata4: DUMMY
and does nothing more. There are no error messages or hints to the source of the problem, to my eyes.I've noticed that sometimes even the loading screen of the live cd will hang indefinitely, leaving me no choice other than a hard-reboot.
The rare times that the system does boot normally, everything works normally. I've tried installing using both the ext4 and ext3 filesystems. I couldn't find anything like this on the forums. Am I doing something wrong? Do you need more details?
I recently upgraded from Hardy to 9.10 Kubuntu. The install went smoothly, and when I boot up, the loading screen (the one with the progress bar) does its thing. Then I see the 'waiting' cursor (in Kubuntu, the two dots chasing each other around in a circle). I see this for about two to three seconds, then the entire thing freezes up and I can't do anything, including switching to a virtual console. How do I figure out my system's dying words so I can figure out what's going wrong? As a (sort of) aside, when I open files in /var/log for reading with cat <file> | less, I have to Page-Down a whole bunch to get to the most recent stuff. Is there a way to jump to the bottom, or read with something other than what I have been using?
View 1 Replies View RelatedToday I installed Fedora12 from the DVD, so this is my first contact with all of you. The last years I ran very well with gentoo, but the time for system maintenance got to big the last few times I updated the system, so I decided to change and here am I. The Problem: My system is newly installed from the DVD and I was trying to run the first update, but got the following errormassage by KPackageKit:
Code:
Error Type:
Error Value: Error getting repository data for installed, repository not found
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in
main()
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3122, in main
backend.dispatcher(sys.argv[1:])
File : /usr/lib/python2.6/site-packages/packagekit/backend.py, line 710, in dispatcher
self.dispatch_command(args[0], args[1:])
[Code]...
It occured after informing me about the amount of packages that need to be updated and a message about some dependencies that have to be newly installed. At the moment I'm a bit lost about what to do. Also I realy don't know which system-information would be useful - let me know and I will answer.
I am running a dual boot with Windows XP and Ubuntu 9.10. I have a Gateway Computer with a 2 GHz processor and 1.25 GB of RAM and a 40GB hard drive. My video driver is an integrated Intel variety. I went to Salimane Adjao Moustapha's website: [URL] and copied and pasted all of his post-installation commands into my terminal to run them. Not sure if this guy knows what he is doing or not. He seems very intelligent and has a lot of good feedback on the site.
Basically he seems to be upgrading/updating everything and adding apps for Video, Music, Utilities, Antivirus/Firewall, Open Office, GIMP etc. Somehow my screen freezes up on a regular basis. I can't mouse click on anything and CTRL+ALT+F2 doesn't bring up an instance of my terminal so I can't kill the offending process. It also freezes up sometimes when I first power it up. In any event, my only recourse is to pull the plug on my computer and reboot.
Installed 11.04 (64bit) on my HP Pavilion G6, in place of windows. ethernet works, however i cannot connect wirelessly. i have done much Google searching but to no avail.
[URL]
I want to revert Suse 11.3 KDE to a freshly installed state. I mean, is there any way to remove any traces of software(s) which have been installed or updated along with any associated repositories.
View 9 Replies View Relatedi got a copy of CD1 from [URL]. And then, i noticed there was no gdm(X server) installed. Is it different from Lenny? It is possible to install X from the CD?
View 5 Replies View RelatedI have successfully installed Slackware 13.1 with the help of a brilliant guide and some reading on my own. And I am loving it. I have installed few applications and feel that the I understand the system more better than any other linuses I tried.
But, the initial fonts look quite out of focussed(can't find a word) or simply ugly?
I searched and found few threads and a dugan's blog but I got confused as to what to do exactly....How to make fonts beautiful or focussed?... This is my first query.....
Also, a second query is about updating the system...I installed Slackware 13.1 DVD without KDE( Yes I love xfce). As I see I used the "slackpkg" utility to update.
First, uncommented the # sign from one of the mirrors in /etc/slackpkg/mirrors and ran slackpkg update
And the next time when I ran the same, it said "No changes in change log between last update and now". I gather it means my system is upto date but I have doubt about it. How do I conform if the system is upto date? Should I necessarily subscribe to the mailing list? It a thing I haven't done yet.
I'm looking at the mainline kernel PPA, and it seems to be somewhat abandoned. for example, the repository sources don't even contain a karmic section, let alone lucid:[url]
My main concern is, I'd like to rebuild the most recent kernel package with a custom patch on lucid, but without a source repository, I can't do apt-get source, and thus I can't get the .dsc file for the pacakge..how / where could I do that?
I'm trying to get wireless access on a laptop with freshly installed Fedora 14 32-bit, but I'm having some issues. I ran the diagnostics advised in this thread: [URL]..Here are the results:
Code:
[root@localhost]# lsmod | grep iwl
iwl3945 97265 0
iwlcore 160590 1 iwl3945
mac80211 188648 2 iwl3945,iwlcore
cfg80211 110951 3 iwl3945,iwlcore,mac80211
[Code]...
just installed a fresh copy of fedora 12 and getting this error when trying to update the system.
Code:
Error Type: <class 'yum.Errors.RepoError'>
Error Value: Error getting repository data for installed, repository not found
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in <module>
main()
[code]....
Running System>Adminstration>Software Udates, I get the following errors
[code]...
Similarly, if I click on System>Add/Remove Software>Package Collections, I get No groups could be found. A cache refresh should fix this. I don't see how to do a cache refresh. I tried rpm --rebuilddb, which didn't do any good and um clean all which also did no good. I did manage to do the updates with yum updates But I don't want to have to use yum at the command line all the time to do updates.
I've made a terrible mistake that I changed files in /etc/yum.repo.d and /etc/yum.conf.Now I can't get update by yum update, saying that ERROR: Cannot retrieve repository metadata (repomd.xml) for repository: base. Please verify its path and try again. Now I'd like to reset everything to default.What can I do now?
View 8 Replies View RelatedWhat's the right direction or give me step by step on how to do this?
View 6 Replies View RelatedHas anyone tried to install Karmic on a laptop that has HP's new Linux on a chip OS installed? I think it's a scaled down Splashtop desktop and at least a portion of the OS is hardware based. I sure wonder what would happen if/when I try to install grub and Ubuntu.
View 7 Replies View RelatedI did a clean install of Fedora 12 (AMD64) two days ago and I have been trying to update the packages. But it won't work. I keep getting these errors. I tried both Software Update and command-line utility to update. code...
View 4 Replies View RelatedI had some major bugs with KDE 4.3 and 4.4 and the only way that I could fix them was to install the entire KDE 4.5. This was mid-Summer. Now I would like to upgrade to Maverick the proper way and have 4.5 in a stock repo.
I managed to get most of kde back to stock by luck and uninstall/reinstalling kdebase stuff and kubuntu-desktop a couple of times. A pain in the neck trying to find important packages that are already installed from a previous PPA.
BTW my sources.list is stock right now.
Does anyone know of a way to search for installed PPA packages that are not in the stock repository?
I created a LiveUSB and that worked. On about the 3rd use I attempted to update packages - about 174 came up I think (I saw that number on another post which reminded me, hence the precision). Two or three dialogues came up, unfortunately unintelligible to me, a Ubuntu novice. Both concerned grub2. The first I just forwarded on and the update trundled on. The 2nd asked me something like whether I wanted grub to update sda or sdb. I checked neither (against the pop-up help advice). The update completed but when I eventually went to reboot from the USB I got a repeating fatal message: something like "Could not load /lib/modules/2.6.31-17-generic/.dep". I had to switch off. It did reboot successfully from a LiveCD.
View 2 Replies View RelatedI was so impressed by the screen-shots of 10.04 LTS that i wanted upgrade via the update manager( am using karmic 9.10).Everything went well with downloading the new packages till the point of installation of downloaded packages. Halfway through the installation power went off and when i restarted the system it was stuck at some point with the message
Code: mount: nothing to mount in /dev or something like that. Then i restarted the system in recovery mode and ran "dpkg" to fix broken packages hoping it would fix the issue.It did to some extent that i was type the problem here through the affected system.
The problem is i couldn't send the crash report the first time around and i can't get hold of it now.My system is somewhere between karmic and lucid ("About Ubuntu" shows as karmic and System Monitor shows it as lucid").So i how do i get a clean installation of lucid?
I've installed a fresh Ubuntu 10.04 in a new dev machine and have been trying to update the package list only to be frustrated. After the install, I went to terminal and did:
Code:
sudo apt-get update
with this result:
Code:
rbsadmin@daredevil:/var/log$ sudo apt-get update
[sudo] password for rbsadmin:
Err [URL]
Unknown date format [IP: 91.189.88.40 80] ....
having somewhat of an issue when it comes to updating through Update Manager.
I get "Failed to download repository information Check your Internet connection."
details :W:Failed to fetch http://ppa.launchpad.net/jonoomph/op...source/Sources 404 Not Found, W:Failed to fetch http://ppa.launchpad.net/jonoomph/op...-i386/Packages 404 Not Found, E:Some index files failed to download. They have been ignored, or old ones used instead.
Running 11.04, no major modifications.
I will try to be as helpful as possible.
also, I believe I have a few hard drive faults- I have reformatted several times, but I still have issues in the boot process.
I am trying to install the gcc package using Ubuntu 9.10, but fail to do so because of an dependency error, which seems to go in a circle. gcc-4.4-base needs libgcc1 before installation, and vice versa. Downloading the recently updated karmic packages did not help.
View 1 Replies View RelatedWell the title says it all.. i don't want to lose all of my settings with a fresh install and I only have the desktop CD, so can you do the upgrade with it?
View 2 Replies View RelatedI've noticed that Synaptic shows VLC 1.0.6 as the latest version of VLC. Except this is not true and 1.0.6 is way out of date. Version 1.0.6 does not even have a REPEAT icon button for the control panel. But newer versions do. Running Windows I can download VLC version 1.1.5 and make use of a REPEAT icon.Is there a way to update the repository? Or a way to tell Ubuntu developers that the VLC repository is way out of date and needs updating? I'm running 10.04 LTS--I thought this was supposed to deliver longterm updates?
View 9 Replies View Relatedwhen I want to update my system I notice some grayed out packages in the repository..u can know exactly what I'm talking abt with this pic:[URL]I want to know why those are gray and un-selectable and how to fix/select them for update if any (I want to have better knowledge of how ubuntu/linux works)
View 5 Replies View Related