I have installed Ubuntu 9.10 and love it but I have one question. I tried to access the bios so that I can activate the Num-Lock during bootup but it's asking for a password. I tried my user password but that didn't work. How do I get that password? It's the only OS on the computer.
View 4 Repliesi am trying to let my BIOS boot up from a CD afther installing openSUSE. so i went to my bios and configured it to boot to cd first then hdd, but it went to my hdd first. no cd..
i am trying to install another OS from cd..
I was given an old Compaq Presario computer; it had a 3.2GB hard drive with windoze 98 (put your crucifixes down, please) and a somewhat broken CD drive. I replaced the CD with a spare DVD ROM and the hard drive was replaced with a spare 250GB. I also removed the old ISA Fax/modem and installed a PCI network card. On top of this I also burned a copy of Xubuntu 8.04 on my main PC, for loading onto the old timer.
But then I came to use the old machine, the BIOS recognised the new DVD ROM, but no menu appeared, just the word "COMPAQ", any attempt to access the BIOS met with no response, (would not respond to "Del" or "Esc" or any of the "F" keys) the PC then attempts to boot from the hard drive (it had an old version of, what I think may be Ubuntu, as it comes up with a GRUB error 1!
I did notice the DVD ROM drive's light flash during the boot sequence. how to access the BIOS?It would be a shame for me to throw this old PC out! (I could always salvage the parts, I have 2 other motherboards and cases ready to make up some more computers, making 5 computers in my network)
i have managed to install ubuntu onto the USB and everything is working fine but the problem i am having is that i can't seem to access the bios on the netbook so i can't boot from the USB.i managed to get acess to the root files using this guide:url...all i need to do is figure out how to get access to the Bios so i can change the settings so it boots from USB.
View 6 Replies View RelatedI have an old computer, it came with Windows 98, later I updated it with Windows XP. XP ran slowly because of it's outdated hardware. Around this time I already had a new computer. I decided to install Ubuntu on it to muck around with. However, Ubuntu also runs slowly and I have a dual-booting computer. However, when I try to get into the BIOS of the computer and run the 98 disk, I can hit every button and BIOS will not load. Question: How do I reinstall Windows if I can't access the BIOS?
View 9 Replies View RelatedIm trying to test out Ubuntu while running Windows currently, once i got the ISO image installed into my USB device by following the steps on the Ubunto site, i rebooted my PC and tried to get into BIOS to change the setting to boot through the USB device.
but i was unable to open BIOS.
this is all i saw in the bottom right side of my screen as far as commands to open some thing before my PC would boot through my Cdrive and load Windows.
L> BIOS Setup/Q-flash
I just upgraded from 9.04 to 9.10 (using Update Manager) in an attempt to get to 10.04. Installation and upgrade seemed to go OK until reboot. Now I only get a black screen - I don't see the grub menu, I don't even see any way to access the BIOS menu- not even a blinking cursor. I can hear it start and I can see the numlocks key go on. Ctrl-Alt-PrtScrn-B does not reboot (nor does Ctrl-Alt-Backspace- but I didn't expect that would) Surprisingly Ctrl-Alt-Del does (or at least it sounds like it does) reboot the system. I do have a NVIDIA cards and after reading around I suspect that this is likely the problem but I have no idea what to do now..
Here's what I've attempted:
I figured since I wanted to get to 10.04 anyway and this was so troublesome I could just go do a fresh install with a Live CD or USB to 10.04. However, even with a live CD or USB I still just get a blank screen.
Continually holding down F2 (and other function keys to try to access Bios)
Holding down Shift while booting
Esc while booting
Moving the monitor to the VGA port (as opposed to the NVIDIA card).
Other information...
Previously I had tried to upgrade to 9.10, but ran into problems with it not recognizing my RAID, so I just found it easier to go back to 9.04. (So although this is likely a graphics problem I guess the possibility is that now it doesn't even see my boot drive- although- if that was the case, I'd assume I wouldn't have the same problems from the CD or USB boot.) My ultimate goal is to get this to 10.04, if I could do it with an upgrade instead of a fresh install I'd prefer that, but at this point just getting back to a functioning computer would be ideal. I see many options in other posts for how to get back once you can access a command line- but since I can't even see that, I'm not sure what to do now.
my problem is the terminal:
E: Could not open lock file /var/lib/dpkg/lock - open (13: Permission denied)
E: Unable to lock the administration directory (/var/lib/dpkg/) , are you root?
I just downloaded OpenOffice 3.2.1 from the openoffice.org weebsite. I followed the instructions precisely and everytime ended up in the same error message - 'error: can't create transaction lock on /var/lib/rpm/.rpm.lock (Permission denied)'. I am using Fedora 13.
View 2 Replies View Related1) how do i access my windows7 partition
2) How do i activate my wireless? The light on my lapptop that says my wireless card is on.
accessing the BIOS on a Powerbook G3 Lombard (1999).
View 9 Replies View RelatedSo I installed Ubuntu 8.04 with Wubi a while ago on my Toshiba Satellite A500/02j and recently uninstalled it (with Wubi). For whatever reason, Windows will not get rid of its bootloader and I cannot access my BIOS settings. I've tried spamming every function key that I have when it boots up but nothing happens (if I press ESCAPE when I'm at the boot menu it restarts). Any idea on how to get rid of it and get me my bios back?
View 1 Replies View RelatedHow do I access my BIOS duirng startup of my Koala 9.10 program? I simply need to make some changes to it and am unable to access it through the normal buttons that worked when the computer had a WIndows (yuck) OS.
View 2 Replies View RelatedWhen i boot my spare machine i am not able to access the bios or use the arrow keys in the Grub2 menu with a usb keyboard.However,once Debian boots i am able to use the usb keyboard and mouse normally.The strange thing is if i attach a Ps/2 keyboard i can access the bios and Grub2 without problems.With the Ps/2 keyboard attached i entered the bios and checked the settings regarding usb and the following options are enabled:
Usb contoller [enabled]
Usb 2.0 support [enabled
Usb Legacy support [auto]
[code]...
I would like to be able to change my BIOS setting to enable me to access a live cd or dvd to try some Linux Distros. At the moment ,when I access the BIOs ,it willl not stay as adjusted ,it ignores the settings ,it goes to default.
View 8 Replies View RelatedIf multiple threads operate on a single shared resource, we can lock it using pthread_mutex_lock. Uptill that it is fine, but why again pthread_cond_wait?
int shared=0; // global
.
.
// Thread 1
pthread_mutex_lock(&mutex);
shared=1;
pthread_mutex_unlock(&mutex);
When thread1 invokes the mutex lock, no other threads can access it in parallel. So why again and what for we use, pthread_cond_wait( ).
I downloaded the x86 10.04 LTS ISO and burned to a disc. I booted it on my old Fujitsu laptop but it just hangs at:
Code:
Begin: Running /scripts/init-bottom ...
Done.
init: ureadahead-other main process (1019) terminated with status 4
init: ureadahead-other main process (1020) terminated with status 4
* Setting sensors limits [ OK ]
I tried all the possibilities like noacpi but to no avail.
I have managed to install Ubuntu 9.10 on my pc I have Vista installed on one hard drive and ubuntu on another. When I boot up on Ubuntu, the desktop comes up, then after about 30 seconds the pc freezes.
View 2 Replies View RelatedWhen i connect windows server 2003 from ubuntu these error displayed .When i installing the tsclient, by executing these following command from a Terminal window:
sudo apt-get install tsclient
When i run these command the following error displayed.
E: Could not get lock /var/lib/dpkg/lock - open (11 Resource temporarily unavailable)
E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using it?
I have a HP Pavilion dv4 that is 4 months old. Yesterday it suddenly seemed to restart then once I logged in it turned off. When I tried to turn it on some of the lights came on and the caps lock and num lock started flashing. Since then I have not been able to get it to work correctly.It once seemed to turn on but died again after the login window.I tried to use my live cd but the same thing happened. It started loading once, but then shut down again. Every other time it stayed dead minus the lights
View 1 Replies View RelatedI recently installed Ubuntu 11.04 on an old Sony Vaio laptop. I was following some of the steps here..[url]
The step "Enable Full DVD Playback(Dual Layer DVD Support)" did not finish correctly doh and now I can't use 'sudo apt-get' for anything or the software center or using the 'Update Manager' does not work.
The update manger says it may be caused by an update not finishing correctly which sounds correct as explained above. The apt-get command gives me back the following....'Could not get lock /var/lib/dpkg/lock resource temporarily unavailable' 'unable to lock administration directory /var/lib/dpkg is another process using it?'
I tried the obvious restart but that hasn't worked.
I have pidgin2.5.2. I want to install pidgin2.6.6.How can I do that?E: Could not get lock /var/lib/dpkg/lock - open (11 Resource temporarily unavailable)E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using it?
View 1 Replies View RelatedThere is a very strange problem I've been having. When I enable either Caps Lock or Num Lock the media controls on my keyboard cease to work. I have Googled this one to death but found nothing. This problem existed in Xubuntu 9.10 and now still exists in Xubuntu 10.04. The keyboard I use is a Logitech Elite Keyboard. I would love to be able to use the Caps Lock and Num Lock without the worry that I am disabling the media controls
View 4 Replies View RelatedI have just burned the latest CD using infraRecorder, as per the instructions on this site, however when I boot from this CD, it spends about 5 minutes moving the red balls across my screen, then all of the sudden it just freezes, and my caps and scroll lock lights start to blink. I've had a look in the forums already but there's nothing about this happening on Boot of the live CD.
View 6 Replies View RelatedI'm wondering why the num lock doesn't work in Ubuntu anymore? When you press the "num lock" key, you're supposed to be able to input the numbers along with + - * / and decimal point. When I press num lock and try typing numbers, nothing happens.
I've done a google search and this is a well known problem that nobody has fixed. In Windows it's never a problem.
Seems such a shame that the great Ubuntu and Linux are so good for stability and speed, but can't get a simple num lock working.
I am having a very annoying problem with my laptop.I am experiencing many freezes.When my laptop freezes, it shows the caps lock and scroll lock lights blinking.At first I thought it was a problem with flash (here is original thread: URL... )In the original thread, I thought the freeze's were being caused by the flashplayer, but it apparently isn't the case.The last time I experienced the freeze, I was playing around with the compiz desktop effects.
View 4 Replies View RelatedI have a HP mini note book and i have a build in mic for some reason my mic don't work? i try going to the sound setting and turning it on but still no go.
View 1 Replies View RelatedI just installed 9.10 on a separate drive in my system. The update manager told me many updates were required, so I went ahead and installed. It needed to restart, but the system just got stuck after the default GRUB entry started loading.Is there a way to undo the updates? I can't boot into 9.10 any more so I'm not sure how this would work.
View 6 Replies View RelatedI am running a dual-boot system (Windows Vista and Ubuntu) and after I upgraded to Ubuntu 10.04 I am unable to boot up Windows Vista.
How can I fix this? Grub is probably where the problem is; but my Windows partition of my hard drive is found and I can boot from it.
Have just installed Ubuntu 11.04, the system is to dual boot with XP.Ubuntu is installed, have been into it and it seems to be working fine. However, when I bootup the computer I get no "Grub!" [Grub is now going to take over the boot process textual alert]. And, once the system gets past that screen, there is no list of Operating Systems to boot choices. Just boots straight into Ubuntu - always.
Solved that by installing 'Startup Manager' (which I knew about from slight previous exposure to Linux) and set the default operating system to Windows XP - this means that now I can't get into Ubuntu.How do I get Grub to show that 'Grub alert'? And how do I get Grub to offer choices of OS to boot in to?