Ubuntu Installation :: Windows 7 Lost On Update To 10.04?
Jun 3, 2010
When I try booting windows from grub, I get nothing but a black screen, and blinking cursor. I have succedeed in locating the issue - when I have updated from 9.10 to 10.04, grub asked where he was supposed to install itself - apparently, this does bad things to NTFS boot sectors.
I've tried the testdisk fix, that apparently solves the problem for most people, to no avail. I tried recovering through the Win7 disk too, and, eerily, that only succeded in killing the mbr too, forcing me to reinstall grub from the livecd.
sudo fdisk-l says this:
Code:
Disco /dev/sda: 1000.2 GB, 1000204886016 byte
255 testine, 63 settori/tracce, 121601 cilindri
Unit = cilindri di 16065 * 512 = 8225280 byte3
Ubuntu's update manager recently updated the Grub menu.lst file. It let me decide if I wanted to keep my old menu.lst or the new one. After deciding that I was fine with the new one, I found out that I can no longer boot into Windows 7. I had previously edited menu.lst so that Windows would be at the top of the list, however, I didn't notice that this had put it into the automagic update area, and I realize now that I should have just edited what the default number was instead of moving around the entries.
Anyways, I can no longer access my Windows 7 OS via Grub, and I was wondering what sort of fix I can have for this. I've tried running update-grub, but it hasn't fixed the problem. The Windows bootloader is on the first partition of the only hard drive, as far as I can remember.
I am happy with ubuntu it's cool, but I want to go back to windows. I lost my windows cd. So I made a blank disc with an iso file. But the problem is. When I try to keep it inside my computer and restart it won't load. I think grub has something to do with this.
How can I get my dual boot working again? I had a dual boot with Ubuntu 10.04 and windows 7. It was all well tweaked but I was annoyed with the ugly boot menue with old kernells so I decided to install BURG loader and remove some of the old kernells. So I did and after that I have not been able to reach my Ubuntu boot.
After multiple attempt to restore the old kernells and reinstall grub (through a USB live stick) i couldnt log in to either system (following the steps in this support thread [URL] Finally i mamanged to get my windows 7 working but my boot menue only shows memtest and windows 7 (not Ubuntu). I am affraid to tamper around to much and having a non funtional lap-top in the end. My lap-top still "miss" 40 GB that was set aside for the Ubuntu boot.
I have a dual boot system with Lucid Lynx and a Windows 7 that came with the laptop (it's a Dell Studio with an i3 processor).
Grub2 boots into Win7 and Ubuntu just fine. The thing is that if I choose Win7, next time Grub doesn't show up. I can't boot anything and the screen turns black. I can reinstall grub2 with Ubuntu's live CD and the cycle starts all over again, it's very annoying.
These facts may or may not be important: I think that this started happening when I uninstalled wubi after being able to install ubuntu through another method When reinstalling grub there's an error that repeats through many lines of the terminal (I can't remember what it says, if you think it's important I can check). Anyway, it ends up saying the installation finished successfully.
I dual-boot ubuntu 9.04 and windows 7. I recently reinstalled windows, and it wiped grub-legacy off of my MBR. Reinstalling grub shouldn't be tough, right, especially with clear instructions? Anyway, I can't get anywhere with the official instructions here: [URL]. The first issue is that the current live CD has no program "grub" in terminal. I dug up an old live cd, but I couldn't get anything with the directions:
Find where Grub is. If this gives a few different answers then you will need to find the correct one, perhaps by trial-and-error. find /boot/grub/stage1 That command didn't find anything, nor did some similar commands found on google.
So I'm really at a loss. What should I do? -Can I install Grub 2 on my MBR? Will that work with 9.04? -Can I access my 9.04 install, copy files to Windows, and then just format the partition and clean install 10.04?
I was getting ubuntu grub menu, and i was able to login to windows xp, windows server 2008 and ubuntu 10.10. Recently there was some problem with windows server 2008 and i had to reinstall it, once i did that i lost my grub menu. now i am getting plain windows menu with option of login into windows xp and windows 2008. So how can i restore the grub menu, so that i can login into all the three os from one point.
I have a two Hard disk one of which is 160GB & other is 500GB. In 160GB HD I had installed fedora 13 & in 500GB Windows 7. There was my unluck that the whole of partion of 500GB were convered into dynamic disk so that i was unable to access other partion of 500GB HD. i searched for that but ultimately i was unsuccessful. Now I decide to format the C: drive (of 500GB HD).C: drive was 80GB size and there was a system information partition of 100MB created on windows seven installation.Now on installation of fedora 14 in 500GB (at partition 80GB + 100MB) i am unble to access other D: & e: drive. In Disk utility of fedora it is showing 414GB free.
I have just updated to 10.04 on my Dell Insperon 8200 laptop, and all seems well with Linux.My problem is that although it shows in Grub Windows XP will not load. I just get a blank screen with a flashing cursor.I have tried to grub-mkconfig and grub-update, both of which reported successful results.However on reboot I still get a blank screen for windows.This was not an issue with 9.04 and 9.10.so I don't think it is the machine.
I had a working dual boot Ubuntu 10 and Windows 7. Anyways long story short, I got it working again but have lost the boot option for windows 7. If i run fdisk -l, I get the following.
I installed gparted and can see that windows 7 is installed in dev/sda6. In another forum, i read that someone had to edit their menu.lst so i did with the following.
I have a 250Gb hd on my Vista machine that I allocated 130Gb to an Ubuntu partition. Recently I had to reformat my Vista partition and now I don't have the ability to access my Ubuntu partition. What should I do?
When trying to clean up old kernels I accidentally deleted the current kernel (2.6.35-24). I then had problems when I reinstalled and found that I could only boot into command line mode. I was able to fix this problem but have since installed the latest kernel release (2.6.35-25) and now have the same problem as before. Of course, I could do what I did before but I guess this is going to occur whenever I upgrade in future.
I have duel boot Windows XP and Ubuntu 910. I've just downloaded and installed the latest update for Ubuntu 9.10. After my latest update, Windows will no longer start. When I select Windows from the grub loader, the screen goes black with a blinking white horizontal cursor at the top left of the screen. I have read that it may of something to do with "update from Karmic to Lucid", what ever that is.
I have been phenomenally unlucky with Ubuntu as seen my my post history and decided to dual boot.
I set it all up with a clean install, when I tried to load Windows from Grub the computer restarted. After much headache I managed to set it up correctly (when it wouldn't load from Grub I booted from the Windows CD and clicked on "Repair computer" and it finally worked).
Now I am having the same problem as before--I think my installed all the updates from Update Manager and it included a grub one. Now I can't load Windows from the grub menu: It goes to the Starting Windows screen and then reboots my computer. If I do it again it gives me an error message and an option to perform "Startup repair". When I try to do Startup Repair, the computer reboots after a few loading screens.
So I tried what worked before and put in my Windows 7 CD, and clicked on Repair Computer. BUT NOW it gives me an error message somewhere along the lines of system restore is not compatible with my installation of Windows, and to insert a compatible recovery CD. This is the ONLY Windows CD I have (legitimate copy).
Over the course of this migration experiment I have installed and reinstalled both operating systems 7-10 times total. I'd rather not do it again. My poor laptop is probably wondering what the heck.
I can't stick with Ubuntu alone because my wireless doesn't work with it, my grad school files are not completely compatible with open source software, and I can't play the games I'd like to. So I must have the option to at least dual boot into Windows.
When selecting Windows it restarts the computer entirely to the Compaq screen, not just to the Grub menu, if that matters.
Cant boot windows or ubuntu Well i have two hard drives, i used wubi on windows (which is on my c: drive) to put ubuntu 10.10 on my d: drive. Everything was running smoothly until the update manager uptated ubuntu. When the installation was completed, i was told to restart. So i did. When it restarted, nothing happened. My computer froze and i cant access windows or ubuntu, and i cant change anything.
I have recently updated my system (10.10, standard gnome with nivdia-drivers and compiz) and after a reboot I can't start conky, which usually starts on boot. Starting conky gives me:
Machine: Win2000 Pro, AMD64 Athlon 2GHz, 2x80Gb HD, 2 GB RAM Symptoms: Running 9.10 with dual boot no probs for ~ 1 year. Decided to upgrade online via synaptic to 10.04. Upgrade went well no warnings, etc. On reboot all OS options present in Grub BUT clicking on Win2000 causes the screen to blank temporarily and then return to the Grub menu ie. no functioning Win2000 boot option. Ubuntu 10.04 boot yields blank screen with flashing cursor, a sudden stream of IO error messages (can't capture it but the lines look identical) then screen flickers and I'm at the purple log in screen and everything proceeds perfectly from there.
Observations: For the first time on any of my ubuntu installs (i've been using since 8.04 always installing from CD though) grub installation asked where I wanted it. In fact, the screen shows all devices with check boxes wth which to make my choice. That is sdb, sdb1, sdb2, ... , sda, sda1, sda2, There was a message that says that if in doubt install on _all_. Being in doubt I checked all the boxes: sdb, sdb1, etc. I noted in the message streams that followed after i continued that some lines had "... this is BAD ..." but since it was all rolling along very quickly no idea exactly _what_ was bad.
Action: I am not a linux newb but I am a grub newb. I fished the forums and googled only to come completely confused about what the problem might be or what to do. Example: have i overwritten my win bootloader? is my mbr corrupted? if i remove grub what will happen? if i remove and reinstall grub will i get windows booting back? if i use my win2000 install CD will it overwrite my whole disk (as many warn) or can i just fix the mbr? if I do the latter what order do i ie use fix mbr then fix boot? The info i've come across so far either doesn't address what happened to me, deals with other OSs (XP, Vista), or is applied to earlier editions of grub/ubuntu. Right now I have not found a clear step by step that addresses my circumstance. Would anyone be able to provide some guidance? I need the windows boot to run some software (Matlab) that btw will not work with XP/Vista (hence the reason i still have win2k).
With a bit of help from this forum I managed to install 10.04. The solution was to add i915.modeset=1 to the options when booting up from CD.Now I need to do the same in order to boot up from HD. I've opened /etc/default/grub and changed the relevant line to include the above option. But I need to run "update-grub" and it comes back with an error to the effect that it 'can't find a device for / (is /dev mounted?)Also, the boot menu only has ubuntu - no sign of windows in my intended dual-boot. What can I do?
I am running Ubuntu 10.10. Normally when I boot, I get the choice to run Ubuntu or the Windows loader, where I choose between 7 or XP. I have just noticed that when I boot now, I do not have the choice of going into windows. This has happened on two of my PC's just in the last few days. I assume one of the updates has overwritten the grub configuration file as I still get the grub menu but not the windows option. I have tried sudo update-grub but this did not solve the problem.
I installed Windows Xp 64bit(in a partition called d:) with dual boot with Debian Wheezy. Installed first Windows Xp and after Debian Wheezy, but grub is not seeing Windows!
Look at my "fdisk -l". root@robgeek:/home/rob# fdisk -l
Disk /dev/sda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xe274e274
I have had such good sucess with Ubuntu that this took me by surprise. Last week after an update I was suddenly without sound in Karmic Koala. Fortunately. I also have Lucid Lynx and the sound is OK there. I really gave it a dedicated try but was unable to get any sound.
I have a problem with sound. I have 2 boards that I can select from 1 internal 1 external for Ham radio. I was on a program that I was trying to get updated Fldigi. And now I lost the sound. My bad I now know. Here is a picture of what I see when I go into the System/Preferences/Sound
I did a clean install of 11.04 and then installed the updates it prompted me to. After restarting I was missing metacity and when I checked in synaptic I didn't have gnome installed. Here's the error message I got when I tried to install gnome (and dependencies):
after giving me no problems whatsoever (currently 10.04 Lucid Lynx) I lost wireless connectivity on my laptop after the following updates were processed yesterday:
Commit Log for Sun Jun 12 16:18:28 2011 Upgraded the following packages: dkms (2.1.1.2-2fakesync1) to 2.1.1.2-2ubuntu1 flashplugin-installer (10.3.181.14ubuntu0.10.04.1) to 10.3.181.22ubuntu0.10.04.1 flashplugin-nonfree (10.3.181.14ubuntu0.10.04.1) to 10.3.181.22ubuntu0.10.04.1
[Code].....
but as it all worked fine before and this was just an update not an upgrade I suppose drivers etc are all OK anyway.
Also, rfkill showed nothing was blocked to need unblocking, and ifconfig gives a permissions error
I have a wired connection operating without any problems at all.
I'm using Maverick Meerkat, 10.10, 64bit. I'm a pretty basic user but am trying my best to learn.
My background: I have a laptop on which I installed Win7 Ulimate on one partition. After installing Win7 I then installed Ubuntu on a separate partition. GRUB2 found both Win7 and Ubuntu perfectly. I could choose to boot into either one and the ability for GRUB2 to "remember" which OS I booted into last worked properly. I then did a kernel update a couple days ago via Ubuntu's Update Manager. After that, GRUB2 could no longer see Win7. I added a custom boot entry in /etc/grub.d/ so that Win7 would show up in GRUB2.
However once Win7 did show up in GRUB2 I kept having a problem with the Windows bootloader being missing. I used the Win7 Recovery DVD to get into Windows and then installed EasyBCD for Win in which I was able to create a Win7 boot entry and get the Win7 bootloader back. I set EasyBCD to skip the bootmenu so my current configuration now is that on bootup I see GRUB2, which shows Maverick Meerkat & Win7. If I select Win7 then Win7 loads via EasyBCD and it works fine.
The problem though is that GRUB2 does not auto-detect Win7 AND it no longer remembers the last OS that I booted into. I would rather not use EasyBCD if I can help it and would like to just use GRUB2 for everything.
My question is this: How can I get GRUB2 back to controlling Ubuntu & Win7 properly without the need for anything else in between. I have asked in the Freenode Ubuntu channel but haven't received any help besides "sudo update-grub" which I have done and it hasn't helped.
I updated my computer Wednesday (01-20-2010) and excluded three mesa... files and one xorg... file. I had recently read that people were having problems with these particular updates and I wanted to address them separately (to isolate any problems I may have). I think I may have screwed things up by accidently including the libdrm file. This file was previously missing for the mesa updates. The update I did included several plymouth... files also (don't know if it matters). Now I have a black screen with a cursor, after the fedora (charge) logo completes.
If I hit Ctrl-Alt-F2 I can get a login prompt. I logged in and tried to go back and update (as root) the four files I had excluded, hoping to fix the problem. Now I am getting the following errors during the yum update. The first two lines are repeated several times. I can't scroll back to see what's at the beginning.
I just updated an Ubuntu 10.04 kernel to 2.6.32-27-generic, and a wifi driver (r8187) is not present there. Is the only solution reinstalling it or is there a simple way to move it from an older kernel I have on the same machine?
i have a acer aspire one (zg5) with a 2 week old installation of unr. shortly but not immediately following my last update my wifi no longer functions. when i go to the network connections tab in my toolbar it does not list available wifi networks. does not apparently recognize wifi capability at all. but the wifi worked right off the rip on new install.
