Ubuntu Installation :: Upgrading Failure From 8.04 LTS To 10.04 LTS
May 5, 2010
when I try to upgrade from Hardy Heron 8.04 LTS towards Lucid Lynx 10.04 LTS (via internet, not ISO-CD), following error is displayed:
" Could not install the upgrades
Error during commit
'E:Couldn't configure pre-depend jre for openoffice.org-writer2latex, probably a dependency cycle.'
Restoring original system state "
I deleted all Open Office package and other options were checked, but no success. Hardware: Notebook Toshiba Qosmio G45-AV480.
Have a dual boot: vista & ubuntu (64bit). Clicked the upgrade to 10.04 in update manager & spent a couple of hours downloading & installing. Had several requests about menu.lst. Which i replied keep the current Big mistake (i think) because on the reboot all the options are for 9.1. Tried the top option and 10.04? (i think) comes up but mouse & keyboard are inop.Booted with super grub cd & let it boot gnu/linux. Looks like 10.04 came up (how can u tell?) and seems to run ok. So what can i do to get the 10.04 options when rebooting without the grub cd?
Upgrade calls for ensuring latest updates to Karmic are installed before upgrading to 10.04 LTS. Every attempt to update hangs, yielding the following dialogue:
W: GPG error: http://ppa.launchpad.net karmic Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY B152F042D246C25D I guess I am sort of stuck in nowhere land here.
I know why this happened, but I need to know what problems it's going to cause and how I can re-install / fix the problem. I have my /tmp folder mounted as -noexec ... so when I did a recent update to my 10.04.1 LTS server installation, I got the following errors:
She was running a script in R (which was supposed to take a regression from R and output to LaTeX) but it failed, causing a "massive core dump" and shut down her computer. She rebooted, performed a recovery, but her system was still running slowly so she decided to upgrade to Narwhal. At this point she received an error message saying that the upgrade was interrupted by an eclipse package, and it failed, saying that her (disk? she couldn't remember) "may not be recoverable." Now, when I try to boot from GRUB, from any kernel listed ($22, $25, $27, and $28 ), I get the following error message:
I booted from a LiveCD, and it worked (including the splash screen). I then scanned the hard drive with smartctl, and looked at it in Gparted. Nothing seemed amiss. I could open files stored on the hard drive from the LiveCD, so I think there is something wrong with the boot process but I don't know how to fix it. One idea I've got is to run Super GRUB Disk and see if that fixes my boot problems.
I'm attempting to upgrade my Ubuntu 8.04 VPS to 10.04 and I'm having some trouble with the final stages of the installation. This is a section of the output I get (seems to be the bit that is going wrong):
Code:
... Checking init scripts... WARNING: this version of the GNU libc requires kernel version 2.6.18 or later. Please upgrade your kernel before installing
[code]....
P.S. I don't mind doing another fresh upgrade from the initial 8.04. So the problem is just how to prevent these errors from coming up again.
I upgraded the boot loader using apt-get upgrade. So Grub upgraded and I believe it automatically ran the upgrade-grub-from-legacy executable. I was confused on what to do so I selected all drives. When I did that, I received a bunch of messages, I will write only non-redundant ones:
mdadm group disk not found (many times, over 20 or so) installation finished, no errors reported (4 times, I guess for my 4 hard drives)Found linux image vmlinux Found initrd image Next, I reboot, and absolutely nothing, not even a grub prompt!! So I tried the following:
1) grub-install /dev/sda1 2) Super grub disk 3) Ubuntu Server Installation CD in rescue mode trying, I get the infamous red error screen when trying to install grub
Nothing worked! My partitions are all there and I can see them and mount them from rescue CD, but I cannot boot to the system, My partitions layout:
One LVM sitting on two RAID-1 Drives Sitting on all four hard drives sda, sdb, sdc, sdd One Root partition /dev/md2 in RAID-1 Drive sitting on two of the four drives (sda2 and sdb2) Four bios_grub partitions sda1, sdb1, sdc1 and sdd1 each ~1MB Two Swap partitions on two raid drives
I would give more detail but I think the problem is probably in the bootloader configuration because I can access all partitions including LVM and RAIDs from the rescue CD.
i am trying to upgrade to ubuntu 10.04 from 8.04, and am getting this warning:"Upgrading may reduce desktop effects, and performance in games and other graphically intensive programs.This computer is currently using the AMD 'fglrx' graphics driver. No version of this driver is available that works with your hardware in Ubuntu 10.04 LTS.Do you want to continue?"should i continue? i have no idea what a 'fglrx graphics driver' is
After having tested Ubuttu 9.10 on a VM with Win XP Pro as host and running both Ubuntu 9.10 and 8.04 from a CD/CDR drive I decided to do an installation of 8.04 on a separate HD and import files.Installation seemed to work OK, but on reboot: no menu was shown to choose OS and the machine booted directly into Windows.Tried to boot directly from the "Ubuntu" HD in the BIOS boot menu and get the message "MBR error" full stop literally.The Ubuntu hard drive is no longer recognised in Windows , can't be acessed from the DOS prompt and obviously cannot be reformatted from there.Just for the record, I'm not totally excluding operator error from the cause
installed ubuntu 10.04, i possess the BSNL EVDO AC8700 , i downloaded the package for the same from the zte website but when i try to install it its giving the following error
" (Reading database ... 123335 files and directories currently installed.) Preparing to replace crossplatformui 1.0.27 (using .../CrossPlatformUI-V1.0.27-B
My Windows Vista installation won't start after upgrading from Karmic to Lucid. If I select it on GRUB2, it leaves a blinking cursor on screen. And I tried doing the whole test disk thing and the boot info script. This is what my Results.txt file says
I've upgraded the generic kernel of my Xubuntu Karmic AMD64 persistent USB installation with the ubuntustudio realtime kernel (2.6.31.9.10). The thing is that the generic kernel is still loading as default and I don't have the option on the boot menu to choose the new one. I don't know how to edit this Grub2 version (grub-pc 1.97 beta 4).I haven't found a GUI package for this either.
Running VirtualBox 3.2.6 under some host OS (should be irrelevant which one, right?), I created a machine, intending to install Fedora 13 on it. Got the Fedora 13 Live CD iso image, and an 8.6 GB virtual hard drive, completely blank. I set the machine to boot off the Live CD image. The Live CD boots nicely and I get to its desktop. I open "Install to Hard Drive"...and nothing happens. No error message, zip, nada. Inspection of the system shows a series of odd file systems, but I have no clue what they are for and whether they're usable or not.
The sticky [URL] mentions that the blank virtual hard disk should be partitioned and formatted beforehand...So I did, using the Live CD's Disk Utility (Applications: System Tools: Disk Utility). Although the sticky states the small /boot partition should be ext2 or ext3, the Live CD installer proposes to reformat it as ext4. Shouldn't we have formatted it as ext4 right away, then? Also, the installer set the /boot partition's size to 524 MB, not 200 MB as recommended by the sticky.
OBSERVATION: This was not easy because VirtualBox sets the display to 800x600 at most, and the Disk Utility spills beyond those confines WITHOUT PROVIDING SLIDERS. It was sheer luck that the required buttons (create partition, format partition) were barely reachable (at the bottom edge of the screen). This is a serious problem, because increasing the VirtualBox display size can only be done *after* installation (see for instance[URL] - since this guest addition requires rebooting the guest OS, it probably won't stick to the Live CD).
Once those two partitions are prepared and the virtual machine rebooted, "Install to Hard Drive" works as expected.
OBSERVATION: It is absolutely inexcusable that the Live CD installer (Anaconda?) does not propose to do this partitioning and formatting for the user. It is even more inexcusable that it should fail without giving any feedback whatsoever to the user.
Aside: VirtualBox's guest additions does not work correctly (for 3.2.6 anyway). The Devices: Install Guest Additions menu merely mounts a CD image VBOXADDITIONS_3.2.6_63112) without any feedback (expected feedback because the menu ends with an ellipsis). The CD, once opened, has an Open Autorun Prompt button...which fails to do anything. Manually running autorun.sh also fails. I had to manually invoke VBoxLinuxAdditions-x86.run from a terminal to get anywhere. Even then I was unable to go higher than 1024x768.
I recently realised that I could use Linux to "revive" old machines, and have set it as my goal to actually get all old PCs in my house working again using different variants of Ubuntu, while learning how to use the OS in the process.And now I got stuck while installing the OS on an old Laptop. It's an HP Omnibook XE-3, with a Pentium III 1066 MHz cpu and, supposedly, 256 MB of RAM. However, for some reason the computer only reads 248 MB, so I've been forced to resort to an alternative disc installation. Since the old HP has a broken CD tray, I've been using an external hard drive to boot the image, created with Ubuntu's startup disk creator, instead of an actual CD rom (I doubt that makes a difference, but just in case)
There are two main issues which have really left me with no obvious (for a newbie) alternatives. Firstly, when the text installation procedure reaches the "Installing base system" part, an error message appears saying that no kernel could be found on my Drive, so the installation fails. If I try to skip installing a kernel temporarily, it lags horribly and produces multiple errors, dying shortly after.The second problem is that I can't actually do a command line boot to try and manually figure out a way around this. Selecting the command line installation mode on the main installation menu changes nothing, and it's a normal text install which runs instead.Unable to access the command line,why my kernel is apparently missing.
While upgrading (why did I do it?! 9.10 was working fine!) I got an lengthly error and now the computer won't boot. Error and then boot screen:-
Code: Could not install the upgrades The upgrade is now aborted. Your system could be in an unusable state. A recovery will run now (dpkg --configure -a). Please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report. E:Sub-process /usr/bin/dpkg returned an error code (2), E:Sub-process /usr/bin/dpkg returned an error code (2), E:Sub-process /usr/bin/dpkg returned an error code (2), E:Sub-process /usr/bin/dpkg returned an error code (2), E:Sub-process
Computer won't startup after upgrade from Ubuntu 9 to 10.04 Lucid.
Upgrade performed through Update Manager.
Have repeated this exercise with the same result. (After failed first time, reinstalled v9 successfully. Waited a few weeks then tried updating to v10 again. Same unsuccesful result as last time I tried it.)
Got one error message during upgrade: "Missing resoureces. The Network Manager Applet could not find some required resources. It cannot continue."
Upgrade otherwise appeared to operate smoothly.
But:
When upgrade complete, and on restart, the following happens:
Gets to purple start-up screen fine. The dots tick away for a little while, the hard drive accesses, then goes to blank screen and all stops. Nothing. Keyboard doesn't work. Screen backlit, but no-one's home.
I was running Ubuntu 10.10 and I was having issues with graphics card drivers so I decided to try upgrading to Natty using my Internet. The download went fine, the installation went fine (I sat and watched the computer the whole time. When I tried to upgrade from 10.04 to 10.10 I had the same issue and ended up having to wipe my hard drive and start over from the CD). But right before the installation was finished, the screen went blank except for a tiny text-editing cursor and even the cursor froze. Also, the Caps Lock and the Num Lock lights were flashing in sync rapidly. After a while I forced it to shutdown and then restarted it. GRUB boots, giving me a list and the option to go to a command line, but if I select 2.6.38-8-generic or the recovery mode, it freezes and the lights flash as described above.
In other words, all I can get to is a very basic CLI through GRUB.
Upgraded from 10.10 on my tower (scratch built, AMD Phenom II X6 1090T 3.2GHz, 16 GB RAM, 2x Sapphire Radeon HD6870 1GB) and it seems to have gone very wrong.
At the final post-installation reboot I get BIOS post, a black screen that hangs around alarmingly long, then the Ubuntu splash screen, then another black screen that seems, if anything, even MORE black (don't know how that works, but that's how it looks - it's not OFF but it's VERY black) and a whole lot of nothing going on.
Tried Ctrl-Alt-F1 to get to a TTY session, no go, no reaction. Just my friendly black screen. Tried F2-F6 as well, same deal. Tried Ctrl-Alt-F7 through F12 on spec, also no response. So Control-SysRq-K... and I DO get a response - I get a black screen with a number in []s and SysRQ: SAK. No TTY. Still doesn't like Ctrl-Alt-F1.
No disk thrashing. Nothing but gently whirring fans and my error message.
-UPDATE I take it back, it finally gave me a TTY login.
So. Um. Any guesses what happened to my poor XWindows setup?
I'm running the 64 bit version of Ubuntu 9.10 on an AMD64 dual core platform with all the most recent upgrades installed. After the most recent Kernel upgrade version 2.6.31.20 the computer failed to boot correctly. Extremely slow getting to the desktop and a general failure to preload any programs that I load on boot. I had to uninstall and revert back to the previous Linux headers which solved the problem. If it makes any difference I have the machine setup as an apache2 server along with my standard desktop environment.
I managed to get Ubuntu installed, however, it just won't let me log in. I perform the net-install, and tell it my user name and password. However, once the install has completed, and the system rebooted, I cannot log in to Ubuntu (on X-screen or TTY). I've tried it twice - once with Karmic Koala Ubuntu installed with GNOME - the other with just CLI and they both fail.
Ubuntu/Linux operating systems. It installs just fine but after it reboots I get a "disk boot failure, insert system disk". I have searched around but I can't seem to find anything that works. There is only one hard drive in my computer and no other operating systems on it.
I have a triple boot system running Ubuntu, WinXP, and Win7.I had Ubuntu running fine on its own partition (sda1) but an upgrade from Karmic to Lucid turned it into a dog.So I tar-ed my /home filesystem, split sda1 into 2 new extended partitions, then did a clean install of Lucid with / on sda5, and /home on sda6.I should also mention that I have already tried re-installing Grub from a live USB to no avail.
I ran the upgrade from ubuntu 9.10 yesterday and it's now a mess. Is there something I can do to refloat this ship?
The file download stage seemed to be working OK: I was watching it when it only had three minutes left to go. I went away and came back a few minutes later and the screen had gone black. OK I thought, this must be all part of the plan, so I went away and came back over an hour later: still nothing. I decided, perhaps foolishly, to press the power button and boot it up.
Eek! Now I get the following errors:
mounting none on dev failed: no such device
chroot:cannot execute /etc/apparmor/initramfs: no such file or directory
Then the message Ubuntu 10.04 LTS cruncher tty1 and a login prompt. I can log in OK but don't know what to do next to recover the situation.
Rather alarmingly there is some activity on the system: lots of messages beginning with a number like [22.71309.
Anyone here installed 10.04 on Pentium III's? I have tried installs on 5 of them and have had 5 video failures. These machines all currently run various earlier Ubuntu releases (8.04, 9.04, etc). All of them have 512 M memory but video memory is 32M or less. I have installed 10.04 successfully on 2 Pentium IV's that have 128M video memory so I suspect that's the difference. Is there any trick I'm missing to get the new XRANDR working on these old P-IIIs or should I give up? What I get when bringing up 10.04 from live CD is just a black screen... as 10.04 appears to grind to a halt or just hang.
I was upgrading my ubuntu(9.10)/xp machine to ubuntu(10.4)/xp . but there was a power failure and was running in backup for 15 min. But after that the system shutdown automatically. Now when i boot, grub appears and after selecting the ubuntu partition i get a error saying cannot find device.
I was happily running 10.04--- really worked fantastically! Then, I updated all, and upgraded to 10.10 using the upgrade manager in Ubuntu Desktop. Now, when I choose Ubuntu from the boot page, the computer shuts down--- no errors, it just reboots and I get right back to the boot page. I cannot boot into Ubuntu at all, and I am now stuck with Windows 7 once again.
