Ubuntu Installation :: Upgrade From 10.10 To 11.04 - Graphics Not Recognized?
May 1, 2011
I recently upgraded from 10.10 to 11.04
I have a Dell GX260 with on board intel graphics chip 845G - believe
This seemed to work fine in 10.10 and indeed from version 9.04
After the upgrade to 11.04 I can only run in basic graphics mode -
I have been to the grub menu and taken the recovery option and attempted to reset the graphics mode - it says it cant detect the graphics card or input devices
I have also been to a root shell via grub and tried the command 'X -configure'
this seems to end abnormally but does produce a xorg.conf file - this file makes the graphics unstable with menu bars and such have overflows and lockups -
View 4 Replies
ADVERTISEMENT
Nov 1, 2010
I've installed 10.04 on two different PC's (using two different live cd's) and after updating the software and rebooting the same error came up: in both cases the computer start and then a black screen appears asking me to enter the user and password like those old DOS systems (that is: ALL graphics are gone leaving me with nothing but a useless text prompt).
View 2 Replies
View Related
May 25, 2011
There's no login screen and I can't get to a tty. I have tried editing xorg with the backup, but the name of the driver is the same.Is there anyway to roll back the driver from a livecd?
View 9 Replies
View Related
Feb 17, 2011
my mouse wouldn't work in any fashion after going through most of the install process from Debian Lenny to Squeeze (couldn't click, move the mouse, etc. under both Compiz and Metacity). My system is a Lenovo ThinkPad T61 laptop; I keep the touchpad disabled, but the button mouse (TrackPoint) wouldn't work either. I was following the instructions here:
[URL]
So, the first thing I did was run the following commands, as it says to do:
# apt-get upgrade
# apt-get install linux-image-2.6-686
# apt-get install udev
Then, I rebooted my machine into the new kernel (2.6.32-5-686). I got a ton of udev warning messages at startup (all along the lines of "SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in something-or-other" - details can be provided if needed), but got a functioning prompt. I logged in, ran startx, and everything worked except the mouse, which couldn't do anything - as if it wasn't recognized at all. Switching window managers from Compiz to Metacity, as mentioned before, didn't help. "modprobe psmouse" revealed that that module was correctly loaded.
Rebooting into my old backported kernel (2.6.32-bpo.3-686) restored mouse function, although I still had the udev warning messages (so maybe those aren't relevant, I don't know). Apparently, something about the different kernels is causing the problem, but I'm not sure what - any thoughts? I haven't wanted to complete the upgrade with "apt-get dist-upgrade" without knowing that I'll have a working mouse, since I need a functional GUI at the moment and don't have a good way of fixing it if I trash it.
View 4 Replies
View Related
Mar 1, 2010
The last time I updated Linux it was from Gibbon to Heron. (so 7.10 to 8.04 ) I'm now trying to get caught back up. Thing is, now that I updated from 8.04 to 8.10 I can no longer get to a GUI. Also, most of the text in the terminal is a diamond character as if the font that's installed doesn't want to work most of the time. This is somewhat confusing, but I believe my system's language was set as Japanese before the upgrade and now it's trying to display Kana and/or Kanji and the terminal doesn't like that. Not really important, but I'm not sure how to proceed to the next upgrade or get to a GUI. Fortunately, my system's set up to dual-boot with windows. Can someone help tell me how to get my GUI back or what package to install?
I'm running on a laptop with an ATI mobility Radeon 9700. I've had problems with it and drivers in previous versions back to 6.10 too, but never to the point that the GUI wouldn't work.It's actually an issue with my X Server. I tried "startx" and it says "No Screens found". I looked in my xorg.conf file and there are two screens listed at the bottom. It produced a log too, but I can't get my Flash drive to mount so I can't say exactly what it says. It did mention that there were a lot of font directories that didn't exist along with a few other warnings.
View 2 Replies
View Related
Apr 29, 2011
Just upgraded from 10.10 to 11.04.Under 10.10, moving windows, scrolling, and compiz's expo were smooth as silk with my Radeon HD 5450 using the fglrx driver. After the upgrade, these things are very choppy, to the point that it feels like I'm running without hardware acceleration. The weird thing is, the system tells me I have acceleration --- Compiz is still running and I'm able to use expo and other effects, glxinfo reports direct rendering, and the Additional Drivers control panel tells me I'm still using fglrx (I even tried re-installing it, to no avail). OpenGL screensavers work fine, and glxgears gives me 1550 fps. Could it be that compiz is somehow not using hardware acceleration, even though my driver offers it? This happens in both Unity and Classic desktop.
View 7 Replies
View Related
Mar 3, 2011
I have a Mini-ITX VIA EPIA LT series motherboard running Slackware 13.1
Graphics card is not recognized properly.
But the graphics is OK the first half of the boot, then it turns weird and stays that way.
The screen is very dark, tux in the upperhand left corner is colored wrong. (Red, Purple, Green)
I did a Xorg -configure, and this is the content of xorg.conf.new:
Code:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
[Code]....
View 14 Replies
View Related
Jun 11, 2011
I have tried the tips, and to the best of my ability understand the later posts from the sticky post "Graphics Resolution" however I seem to keep reverting back to the blank screen. I did this:
Quote: ATI TIPS: Note that some ATI cards need flgrlx and some do not... If not then this workaround sometimes works: (Found this in another thread / credit to Quote: Originally Posted by surgus View Post
Steps for ATI users:
1. When the boot hangs, press ctrl+alt+f1.
2. Login as user with root privileges.
3. Type "cd /usr/share/ati" and press enter.
4. Type "sudo sh ./fglrx-uninstall.sh" and press enter.
5. Type "sudo reboot".
The above only works for some but not all, depending on what card you have and whether it actually is supported by additional drivers (proprietary). All at the moment, mostl seem to need "nomodeset radeon mode=X", where x= 0 or 1... Some ATI cards are not working with the current natty kernel, but are working with the older 2.6.37 kernel or the proposed 2.6,38.9 kerne (please see post 2)l Sometimes (rarely) it'll work but more often it won't, and in the two times it's worked I haven't known how to get it to remember the setting permanently- keep in mind I have no idea what that last paragraph about x= 0 or 1 means.
View 1 Replies
View Related
Jun 7, 2015
I am tryint to install Debian Jessie on my desktop.My system configuration are:
Processor:- i7 4790k
motherboard:- Z97X-UD3H-BK-CF
ram:- 4GB DDR3
graphics card:- AMD radeon R9 200 series.
I am trying to dual boot here (Debian and Windows 7).I am trying to setup server here (trying my hands on first time.)I am getting the following error on the screen when i select to boot from Debian (windows boots up normally when selected in grub) I have attached the image,it states:-Radeon kernel modesetting for r600 or later requires firmware-linux-nonfree
View 14 Replies
View Related
May 8, 2011
I actually do have a GeForce4 MX 460 in this pc. I have a 7950gt in a different pc. Oops. I guess the MX 460 cant do 1600x1200 on the dvi output but somehow it can do it on the vga output? I guess I could just use a vga connection instead of the dvi connection.
The problem I'm having is that my LCD monitor (acer AL2021) can't be used at it's native resolution of 1600x1200. This is probably because my GeForce 7950gt graphics card is not being recognized. Xorg seems to think my card is a GeForce4 M 460. (It's not, really!) I'm using Ubuntu 10.04 LTS.
Here's what I've been doing for the last few hours:
This didn't work. 1600x1200 is still not listed.
Tried to run nvidia driver installer:
View 1 Replies
View Related
Oct 11, 2010
I installed a new copy of F13 this morning on my fairly new laptop.32 Bit Intel, 3GB Memory 120GB HDD. The problem I've got is that my Monitor/Graphics card is not getting detected and as a result I'm getting a horrible Resolution/Refresh rate. When I run
lspci | grep VGA
I get this 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 771/671 PCIE VGA Display Adapter (rev 10). how I can get my monitor/graphics recognized to work in the Full Resolution.
View 11 Replies
View Related
Jan 26, 2010
I have just installed Ubuntu (9.10) and noted that in order to successfully run the trial off the CD I had to test in "safe graphics" mode. I have an NVIDIA GEforce 6600 GT card - which was discovered by Ubuntu in the first few minutes of the trial and so I activated the recommended driver and continued to test. After a successful trial I installed Ubuntu (dual partition Ubuntu / Windows XP), however, it seems the install didn't activate the required driver (as part of the process) and so I'm unable to get into my newly-installed Ubuntu at all. All I get is a flashing tty screen asking for my username and password - however it's erratic and won't recognise what I type. So - I'm stuck in a catch-22 as there doesn't seems to be a safe graphics mode option via the start (GRUB?) menu list.
View 4 Replies
View Related
Jul 26, 2011
I was trying to help my dad upgrade the RAM in his Toshiba laptop running Ubuntu 10.10. I checked on several websites to verify that I had got the proper RAM to upgrade from his 2x512MB to 2x1GB (his machine is old, max RAM is 2GB).I swapped the RAM out and rebooted, as I've done many times on other machines, and nothing happened-- the HD light was lit, but nothing else, no bios messages, nothing, just a black screen.
I thought maybe I had bad RAM so I swapped in another set that I had, and this time it tried to boot, but when Ubuntu loaded it died with messages saying that it could not find/mount the hard drive.I was able to put the original RAM back in and it worked fine. I'm pretty puzzled by this-- how could the RAM affect the HD? Is this a sign of needing to upgrade the BIOS or something?
View 3 Replies
View Related
Dec 28, 2010
I am trying to access FAFSA.org but they recently updated their website and will only allow mozilla 3.5 or 3.6 to be used from a Mac or Windows. I don't have either, only Linux. and it has mozilla 3.6. how can I get their website to recognize my OS?
View 1 Replies
View Related
Jun 5, 2010
One partition of my pata drives is not recognized anymore after upgrade. Using fdisk the partition is seen but just 33,8 GB of the 205 GB drive is recognized at all.
Quote:
root@7of9:~ >>> /sbin/fdisk -l /dev/sdd
Disk /dev/sdd: 33.8 GB, 33820286976 bytes
255 heads, 63 sectors/track, 4111 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code].....
The filesystem is ok. Booting Slackware 12.2 the partition is recognized and mountable. why /dev/sdd4 is not recognized by Slackware 13.1?
View 4 Replies
View Related
Oct 16, 2010
I have an Asus K60 laptop with the Athlon chipset. I had wireless working just fine under Lucid. But after upgrading to Meerkat, I can't get my password to be recognized. The router connection is seen without any difficulty, but the WPA password is rejected every time. I've rechecked it, of course, and also checked that it works in the Windows partition on the same machine. I'm using wicd and madwifi, recompiled for the -35 kernel. Here's the relevant output of lspci:Quote:
02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
03:00.0 Ethernet controller: Atheros Communications AR8121/AR8113/AR8114 Gigabit or Fast Ethernet (rev b0)
[code]....
View 3 Replies
View Related
May 1, 2011
Right now I'm working in failsafe graphics mode, with the menu not working. I upgraded to 11.04, all was OK until reboot. Then It said that something about my hardware not supporting Unity. Then It loaded my normal screen. I never had problems with my card, compiz and 3d worked, so I figured it was the driver. It's a NVIDIA. I installed "173", that's all I remember, and an experimental driver. One of them was required to run unity, don't remember which.
After reboot, I got a screen with no menu whatsoever. So no way to do anything. Now I'm in failsafe mode.I could return back to my normal driver, if I could launch the program that does it. But the menu is not working, just "applications", nothing else. How can I go back to my normal display? What is the command line line to launch the driver manager? Also, since the upgrade, it boots like 3 times slower than usual. I'm less enthusiastic about ubuntu now. How do I return to gnome (BTW at login the bottom bar is WHITE, with no option to run GNOME whatsoever. So I have no choice than to use unity, which does not work at all).
View 6 Replies
View Related
Jul 8, 2010
Thats it in a nutshell. and I don't mean the boot splash graphics, I mean desktop graphics! As in upon boot ubuntu goes in "low-graphics" mode. I have had this issue all the time with Lucid and never really found a good fix. With Karmic this was never an issue.As a final fix I tried to reinstall lucid and updated the live CD doing that too. First it worked fine, but after kernel update I downloaded yesterday (with update manager) I have had this "low graphics" issue again.
With Graphics card, I have nVidia GeForce 220 GT. The drivers are up to date, active, and in use. (according to the "hardware drivers" tool.
View 4 Replies
View Related
May 12, 2010
I'm using Ubuntu 9.10. Recently after an upgrade my Ubuntu started running in low graphics mode. After searching through forums, I could finally fix it.I'm not sure what exactly fixed it. I first changed the window manager to metacity. Run the following command:Code:sudo nvidia-xconfig --composite --render-accel --add-argb-glx-visualsAnd then changed window manager to compiz and desktop effects could be enabled.The problem is, everytime I reboot, its again running in low graphics mode, desktop effects cannot be enabled, and I have to do all the troubleshooting again! Any idea how to permanently fix this?EDIT: I found that the graphics is reset even without typing the command everytime. But I still have to switch back and forth from compiz window manager to set it all right!
View 7 Replies
View Related
Jul 12, 2011
I have a very large graphics library that I use regularly, but all files are in WMF format. Prior to upgrading to Ubuntu 11.04 (was previously on 10.04), these files would preview in Nautilus, and GIMP would automatically convert them when they were opened.
Now, these files no longer preview in Nautilus, nor do they open and convert in GIMP. Package libwmf0.2-7 is installed.
View 3 Replies
View Related
Jan 27, 2010
My office has a box which is, by necessity, dual-boot WinXP/Slack. The Slackware I'm running there is -current, all great and fine. Until now... It turned out that my mobo, an ASUS P5KPL-CM, died after a power surge. Since the XP needs software activation, we replaced it for an exact copy of the mobo. After the change the box worked fine in XP, and I was able to connect to the network via the Ethernet interface. BTW, the Slackware version is Slackware-current, updated as of the Jan 9 update (after that I was no longer able to connect to the Net with Slack). However, in Slackware there was a problem: eth0 was no longer recognized. Using /sbin/ifconfig only listed the lo (loopback) interface. The lspci output is:
Code:
01:00.0 Ethernet controller: Attansic Technology Corp. Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller (rev b0)
Subsystem: ASUSTeK Computer Inc. P5KPL-CM Motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
[code]....
View 5 Replies
View Related
May 24, 2010
Sick and tired of sluggish performance using the onboard X1200 graphics so I just ordered a cheap GeForce 8400 with 256MB DDR2 memory. If I simply disable the on board graphics then plug the GeForce card in, will I have to re-install Ubuntu or will the system be clever enough to detect and configure the card for me?
View 4 Replies
View Related
Sep 28, 2010
need to upgrade my intel graphics drivers for Compiz Fusion (3d desktop effects) suse linux 11.1 kernel:- 2.6.27.7-9-pae my hardware configuration is as follows intel dg41rq motherboard 2gb kingston ram intel dual core cpu 2.5 ghz current graphics drivers:- 4 series chipset integrated graphics controllers
View 6 Replies
View Related
Oct 17, 2015
I upgraded from wheezy to jessie, but now I just boot to a console. I've gone through and made sure all packages are up to their latest versions, and I've made sure gnome, xorg, and xserver-xorg are reinstalled (during the upgrade they got uninstalled..).
Here's what happens when I run startx manually:
Code: Select allcharlie@asimov:~$ startx
X.Org X Server 1.16.4
Release Date: 2014-12-20
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[Code] ...
Note also that this whole time, gdm3 has been running:
Code: Select allcharlie@asimov:~$ ps ax | grep gdm3
1058 ? Sl 0:00 /usr/sbin/gdm3
3993 tty2 S+ 0:00 grep gdm3
charlie@asimov:~$ sudo service gdm3 status
[Code] .....
I'm not sure why it prints that it's starting gdm3, but it does that every time I run `sudo service gdm3 status'.
Here's a copy of my /var/log/Xorg.0.log.
View 8 Replies
View Related
Mar 23, 2010
I'm used to kernel updates screwing up both my graphics drivers and my instaltion of parallels. These things break each and every time the kernel is updated. Normally, reinstalling makes the problem go away and I move on. Yesterday, Parallels got screwed and I fixed it by reinstalling but the graphic driver is yet to work.
For reference I am using OpenSUSE 11.2 64-Bit Gnome-Edition with an ATI Radeon 4650, since it probably makes a difference. For some reason the driver from the repo (ATI's repo) would not install and I got errors saying that it has a wrong signature and (ignoring that) I got another error saying it was corrupted. So I could not install as usual.
Instead I went at ATI's site and downloaded the latest driver. It installed but I lost the mouse cursor so I reinstalled the previous version which also installed but it not working properly, although I do have a mouse cursor.
glxinfo gives the following error:
X Error of failed request: BadRequest (invalid request code or no such operation)
Major opcode of failed request: 136 (GLX)
Minor opcode of failed request: 19 (X_GLXQueryServerString)
Serial number of failed request: 24
Current serial number in output stream: 24
fglrxinfo outputs the exact same thing. OpenGL is not working in any way. Even the gears demo and desktop effects (which I tried to reactivate just to test, since I hate those things) simply do not work.
View 7 Replies
View Related
Dec 7, 2010
I've just upgraded from 11.1 to 11.3. When I go into Yast and try to invoke the Graphics Card and Monitor settings, nothing happens - I get the spinning circles for a few seconds and nothing after that. How can I get at those settings, and why doesn't Yast let me do that?
View 9 Replies
View Related
Jun 2, 2010
I just installed Ubuntu 11.04. The drive was formatted when I installed so it's 100% Ubuntu. The only major problem I have encountered is that Ubuntu will not recognize my SD cards. I really need to access these cards, all my film footage is on there. I think the internal SD card reader (If such a thing exists) would have been deleted during the installation process. I am a greenthumb to Ubuntu and have never used it before so I am rather stuck...
View 7 Replies
View Related
Sep 18, 2014
I have a backup HDD with a different distro for my laptop and i can boot into it via external usb or if swapped into the laptop. This HDD/install in question is debian testing and was working fine, the issue arose suddenly. I was first suspecting a failure of hardware somewhere on the motherboard, but the hdd i was using with an external usb adapter also works when installed into the machine. also, the HDD is recognized once i have booted using the external HDD and distro, but it is not recognized by the bios. so i dunno, my first guess is something became corrupt within the testing install, but i guess its also possible that there is some wrong with the HDD but thats not immediately apparent as all the data is still accessible.
Should also note that the HDD with testing on it is also recognized when connected via the external usb adapter, while booted from alternative distro/HDD.
Also. just tried this, but i can get the testing HDD/disto to boot if connected externally. it was going pretty quick, but there i did catch a line about a corrupt filesystem. any commands to run to see what might be going on?? log files to look at?
View 0 Replies
View Related
Feb 12, 2011
I keep getting the following msg as I try to upgrade from 10.04 -> 10.10 ... "Could not calculate the upgrade An unresolvable problem occurred while calculating the upgrade: E:Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages. This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report." I don't think any of the issues above apply - can anyone offer advice on how to get around or "force " the upgrade
View 1 Replies
View Related
May 1, 2010
I downloaded the Ubuntu ISO from Ubuntu website.I wrote it in a CD....I use Linux.I followed the procedures properly.I used the Write to Linux Option after right clicking the file.Now When I try and boot it from windows the CD doesnt load properly...But in linux it does and it shows the files.
View 3 Replies
View Related
