I am trying to access FAFSA.org but they recently updated their website and will only allow mozilla 3.5 or 3.6 to be used from a Mac or Windows. I don't have either, only Linux. and it has mozilla 3.6. how can I get their website to recognize my OS?
View 1 RepliesDownloaded the above file. Also downloaded and installed an update to my existing Firefox web browser, updating it from Version 2.0.0.7 to 2.0.0.11. As predicted, Firefox now has a new security and stability update labeled 3.6.9, which I will download at my earliest opportunity. Once that is done, I will try to install each upgrade as per the suggestions to date to upgrade my Mozilla Firefox web browser from version 2.0.0.11 to 3.6.9. My hardware: ASUS Eee PC 4G (701) My operating system: Linux - Debian Distro by Xandros
View 6 Replies View RelatedI'm running Mozilla Firefox 3.6.17. Can someone tell me the easiest way to upgrade to a newer version? When I search on Google, I get ;lots & lots of pages & they give me 20-different instructions on how to do it & i'm confused. Not sure which command to use (There is no "upgrade" option in the "tools" area of Firefox.) Do we upgrade in the command-line?
View 6 Replies View RelatedI'd like to upgrade the latest version of Mozilla Firefox?
View 3 Replies View RelatedIs it safe to put my old .mozilla and .mozilla-thunderbird folders from xandros 4.2 into OSS 11.3? I have apps, emails, and settings that I would like to keep. This might seem like an over precautious question, but I've broken Xandros more than once. I would hate to do it to OSS.
View 2 Replies View RelatedI have been doing periodic net-based dist upgrade since 7.10. Currently I use 9.10. Now that 10.04 is out, I want to upgrade to the latest LTS version by doing a clean install, instead of using net-based dist-upgrade.
Since I use Firefox, and Thunderbird, I want to keep the passwords/bookmarks I have stored in firefox, and mail/account settings (for multiple email accounts) that are in Thunderbird.
While I know I can copy the hidden profile directories for each, and back them up for recovery after the upgrade by copying them into the new 10.04 after install is complete, I don't know if this is recommended, prudent, or if pitfalls await me. Since I want to do a clean install, and, since 10.04 uses different versions of both Thunderbird and Firefox,
1. Would it be prudent to back up/use the existing profiles I have in 9.10, or should I bite the bullet and just start fresh with new profile setups when I finish installing 10.04? 2. Are there any pitfalls I need to be aware of if I will be restoring a profile of each from 9.10?
3. Or, should I continue to do net-based dist-upgrades to 10.04 so appropriate profile changes can be made by the new versions of Thunderbird/Firefox software?
I was trying to help my dad upgrade the RAM in his Toshiba laptop running Ubuntu 10.10. I checked on several websites to verify that I had got the proper RAM to upgrade from his 2x512MB to 2x1GB (his machine is old, max RAM is 2GB).I swapped the RAM out and rebooted, as I've done many times on other machines, and nothing happened-- the HD light was lit, but nothing else, no bios messages, nothing, just a black screen.
I thought maybe I had bad RAM so I swapped in another set that I had, and this time it tried to boot, but when Ubuntu loaded it died with messages saying that it could not find/mount the hard drive.I was able to put the original RAM back in and it worked fine. I'm pretty puzzled by this-- how could the RAM affect the HD? Is this a sign of needing to upgrade the BIOS or something?
One partition of my pata drives is not recognized anymore after upgrade. Using fdisk the partition is seen but just 33,8 GB of the 205 GB drive is recognized at all.
Quote:
root@7of9:~ >>> /sbin/fdisk -l /dev/sdd
Disk /dev/sdd: 33.8 GB, 33820286976 bytes
255 heads, 63 sectors/track, 4111 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code].....
The filesystem is ok. Booting Slackware 12.2 the partition is recognized and mountable. why /dev/sdd4 is not recognized by Slackware 13.1?
I recently upgraded from 10.10 to 11.04
I have a Dell GX260 with on board intel graphics chip 845G - believe
This seemed to work fine in 10.10 and indeed from version 9.04
After the upgrade to 11.04 I can only run in basic graphics mode -
I have been to the grub menu and taken the recovery option and attempted to reset the graphics mode - it says it cant detect the graphics card or input devices
I have also been to a root shell via grub and tried the command 'X -configure'
this seems to end abnormally but does produce a xorg.conf file - this file makes the graphics unstable with menu bars and such have overflows and lockups -
my mouse wouldn't work in any fashion after going through most of the install process from Debian Lenny to Squeeze (couldn't click, move the mouse, etc. under both Compiz and Metacity). My system is a Lenovo ThinkPad T61 laptop; I keep the touchpad disabled, but the button mouse (TrackPoint) wouldn't work either. I was following the instructions here:
[URL]
So, the first thing I did was run the following commands, as it says to do:
# apt-get upgrade
# apt-get install linux-image-2.6-686
# apt-get install udev
Then, I rebooted my machine into the new kernel (2.6.32-5-686). I got a ton of udev warning messages at startup (all along the lines of "SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in something-or-other" - details can be provided if needed), but got a functioning prompt. I logged in, ran startx, and everything worked except the mouse, which couldn't do anything - as if it wasn't recognized at all. Switching window managers from Compiz to Metacity, as mentioned before, didn't help. "modprobe psmouse" revealed that that module was correctly loaded.
Rebooting into my old backported kernel (2.6.32-bpo.3-686) restored mouse function, although I still had the udev warning messages (so maybe those aren't relevant, I don't know). Apparently, something about the different kernels is causing the problem, but I'm not sure what - any thoughts? I haven't wanted to complete the upgrade with "apt-get dist-upgrade" without knowing that I'll have a working mouse, since I need a functional GUI at the moment and don't have a good way of fixing it if I trash it.
I have an Asus K60 laptop with the Athlon chipset. I had wireless working just fine under Lucid. But after upgrading to Meerkat, I can't get my password to be recognized. The router connection is seen without any difficulty, but the WPA password is rejected every time. I've rechecked it, of course, and also checked that it works in the Windows partition on the same machine. I'm using wicd and madwifi, recompiled for the -35 kernel. Here's the relevant output of lspci:Quote:
02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
03:00.0 Ethernet controller: Atheros Communications AR8121/AR8113/AR8114 Gigabit or Fast Ethernet (rev b0)
[code]....
My office has a box which is, by necessity, dual-boot WinXP/Slack. The Slackware I'm running there is -current, all great and fine. Until now... It turned out that my mobo, an ASUS P5KPL-CM, died after a power surge. Since the XP needs software activation, we replaced it for an exact copy of the mobo. After the change the box worked fine in XP, and I was able to connect to the network via the Ethernet interface. BTW, the Slackware version is Slackware-current, updated as of the Jan 9 update (after that I was no longer able to connect to the Net with Slack). However, in Slackware there was a problem: eth0 was no longer recognized. Using /sbin/ifconfig only listed the lo (loopback) interface. The lspci output is:
Code:
01:00.0 Ethernet controller: Attansic Technology Corp. Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller (rev b0)
Subsystem: ASUSTeK Computer Inc. P5KPL-CM Motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
[code]....
I have a backup HDD with a different distro for my laptop and i can boot into it via external usb or if swapped into the laptop. This HDD/install in question is debian testing and was working fine, the issue arose suddenly. I was first suspecting a failure of hardware somewhere on the motherboard, but the hdd i was using with an external usb adapter also works when installed into the machine. also, the HDD is recognized once i have booted using the external HDD and distro, but it is not recognized by the bios. so i dunno, my first guess is something became corrupt within the testing install, but i guess its also possible that there is some wrong with the HDD but thats not immediately apparent as all the data is still accessible.
Should also note that the HDD with testing on it is also recognized when connected via the external usb adapter, while booted from alternative distro/HDD.
Also. just tried this, but i can get the testing HDD/disto to boot if connected externally. it was going pretty quick, but there i did catch a line about a corrupt filesystem. any commands to run to see what might be going on?? log files to look at?
I just installed Ubuntu 11.04. The drive was formatted when I installed so it's 100% Ubuntu. The only major problem I have encountered is that Ubuntu will not recognize my SD cards. I really need to access these cards, all my film footage is on there. I think the internal SD card reader (If such a thing exists) would have been deleted during the installation process. I am a greenthumb to Ubuntu and have never used it before so I am rather stuck...
View 7 Replies View RelatedI was installing DYMOUM from [url]. "make" command is issuing this error:
Code:
Prior to this, ns-2.34 was working fine. Patches are applied very well.
I am in under fedora 9 and:
Code:
I'm trying to cross-compile glibc 2.2.3 for PowerPC 405 using ELDK 3.0 on a x86_64 machine.
I have unzipped glibc-2.2.3 in a temp directory and configured using:
The configuration seems to run fine but when I do make I get the following error:
This is the error in the config.log file:
I have installed the libgd package using apt-get install libgd2-xpm-dev and I also tried recompiling using libgd2-noxpm-dev package but I still get the same error.
i don't have Mozilla installed yet. i'm using fedora 11
View 7 Replies View RelatedI have a Favorites folder from my Windows computer that I saved on my Ubuntu computer. How do I add it to Mozilla ?I do not have a HTML file or IE on this computer to import.
View 2 Replies View RelatedStill working my way FROM Windows TO Ubuntu and noticed that when I opened Firefox there was no security indicator and 'about' does not state anything about security. In windows it would have a security icon or in about it would say SSL 128 or 256. Reason I ask is I do online banking and certainly don't want to have my 'information' broadcast all over the internet. IS security handled in Ubuntu and if NOT what do I need to download/install to be sure I am protected. Did a search but could not come up with anything concrete
View 4 Replies View RelatedSo I want to use a java program, and I installed openJDK java runtime and IcedTea Java plugin. Now when I go on the site, it says "additional plugins required to see the page. When I click on install additional plugins, It says "Plugins already installed" And it doesn't work.
View 3 Replies View Relatedim just recently in to linux world and the first thing i did is to familiarize my self to the environment of linux and then and structure of file system. I run F10 in virtualbox. and setting it to bridge mode.
after that i began configure my network in linux. as default i connect to the internet. enable NetworkManager and dhcp on(auto detect ip).
then i began to manually configure it.
enable eth0 and insert the necessary ip i found in ifconfig then active eth0 then restart /etc/init.d/network
then i still dont have internet.. then i read that i need to disable my NetworkManager, so i do that.. and it works.
BUT one day later . cant connect to the internet.. so i redo my configuration. and to check if i have internet connection i ping outside ip like our external DNS, public site, localhost etc.. and i can ping all of them but when i use mozilla i cant browse any site..
i have to run some html, perl, php programs on my fedora.. but itseems i have a localhost problem .. not abe to run any pgms on localhost in Mozilla..? how do i resolve this? (i run usually as [URL] usually in fedora 6 or previous versions this works .. but m not able to figure out how to do in newer versions ..
View 4 Replies View RelatedI need instructions on how to update Mozilla Firefox from 3.5.9 to 3.6.3 in Fedora Core 11.
View 14 Replies View RelatedThis week I installed Ubuntu and I like it very much. I tried to install flashplayer on mozilla, this is what my own chatsite needs.
I did the following:
-> Places
-> Downloads
Now i cannot chat on [URL]... The only thing i see is a blank page. How can i add flashplayer to mozilla ?
I'm fairly new to Linux and everything and still doesn't understand a lot of things about it. But as most of you may know that ..... is probably going to switch to HTML5 (so I heard) and I can not get Firefox to work with it. It is really annoying and I have flash player working but some videos require HTML5.
View 8 Replies View RelatedI tried to goto ..... and watch a video, it said i needed the adobe flash plugin, so i went and clicked install missing plugins, it come up with adobe flash plugin, but when i went to install it, it said it was already installed, and i couldnt re-install it, and no videos on ..... will work
View 1 Replies View Relatedopening a location that is a PDF file does not result in the file being loaded in Mozilla. Nor does it result in a dialog popup asking to save or open the file. I have the Adobe Reader plugin (Adobe Reader 9.3) enabled. On Lucid I get a blank white (sometime black) page. Using Karmic Koala, everything is fine; I get a dialog asking to save or open.
Here are a few example sites where loading does not work right:
[URL]
It is possible that the last one is only be accessible from a domain with online access such as a University.
I have a new laptop where I had to install Ubuntu 10.04 (8.04 wouldn't boot). All Mozilla software that I use every day (Firefox, Thunderbird, Sunbird) has blurry fonts in 10.04, as opposed to 8.04 where all the fonts are clear. I remember that on 8.04, Thunderbird 2 has the same blurry fonts if I use the package from Mozilla's website, but the fonts are clean if I use the Thunderbird 2 from the repository. The fonts in the content rendering (mail, web pages) are also blurred in a similar fashion in 10.04. I attach here the menus from Firefox 4.0 beta 1 on 8.04 and 10.04. It can be seen on large zoom that the fonts are not only blurry, but slightly smaller in width.
View 5 Replies View RelatedI uninstall unwittingly firefox from my ubuntu , i want to get it back . i download the package from mozilla site and i want to install it from the package i already download it , when i click on file named by firefox in that downloaded folder , i find that it open firefox as if i already installed it when i click to choose run in terminal
View 9 Replies View RelatedOk I just installed mozilla firefox or at least believe I did with this here.
apt-get remove iceweasel
mv firefox-3.0.5.tar.bz2 /usr/lib/
cd /usr/lib/
[code]....