Ubuntu Installation :: USB Boot Works With Thinkpad T60 But Not With T520?
May 11, 2011
I decided to test Ubuntu 11.04 on my Lenovo Thinkpad T520 as it has no OS currently. I created USB boot media with unetbootin on a 4 Gb stick, and it worked with my old T60 but not with this T520 (it just jumps back to boot device selection few seconds after selecting USB as there was nothing written on the stick).
Specs of the machines are
T60:
C2D T5400 CPU
3 Gb RAM
ATI Mobility Radeon X1400 GPU
[Code].....
View 2 Replies
ADVERTISEMENT
Aug 10, 2011
I have a new Thinkpad T520 from work and am trying to put Debian 6 on it. I previously had a Thinkpad T42 and was able to install Debian 6. I recall having to find the driver and install it separately, so I downloaded all of the non-free drivers, but the network detection step doesn't seem to let me select my own driver.
I've been thru this at least 4 times, both the standard 6.01 and the AMD64 bit version, both behave the same. This has the (unfortunately) the Thinkpad b/g/n wireless card, but the wired ethernet is the Intel 82579LM gigabit. Seems there would be a driver with Debian 6 that would support that one.I can't stand running Windows 7.
View 12 Replies
View Related
Jan 28, 2010
have been trying to setup a dual boot system with ubuntu and XP running side by side on my Thinkpad T41.tried it a few times and always causes the same problem. i have 40 gig HDD, on which i create a 13 gig NTFS partition and leave the rest as free space. then install XP on the NTFS partition. no problems.
then i boot from the ubuntu disk (9.10 Karmic) and install using the "use free space" option at the partition section. ubuntu installs ok, and boots fine from GRUB 2.0. BUT when i select the XP option from GRUB's list, it starts to boot XP, i get the standard XP loading screen for three seconds and then it crashes to a blue screen critical problem, and restarts the system. when i then boot from the xp cd and go into recovery mode CHKDSK will not recognise the disk, and DISKPART shows one HDD at 35 gig which it cannot access.
this means i cant run FIXBOOT and get my xp install running again. every time i do this process it produces the same problem. tried at first with xp installed on whole HDD, and reducing the xp partition size. killed XP. then tried ubuntu first and xp second - but this caused the same inaccessible disk problem - xp would not recognise the partitions and would not install. so i slipstreamed my XP install disk to SP2 hoping this would make it recognise the partitions, but no luck there. so had to format all and repartition the 13 gig NTFS for xp. installed xp again without difficulty but ubuntu install killed my xp in the same way.
View 9 Replies
View Related
May 19, 2010
I have been using ubuntu and kubuntu now for about 2-3 years non-stop, and I was originally a windoze user, so please bare with me.. I'm not a god at this stuff.The previous couple of versions of ubuntu I have been using, have had a few glitches after their immediate initial releases, so I have come to the conclusion now whenever a new release is made there will be issues for a while until someone figures them out.As I am sure most of your are aware, during bootup of either ubuntu 10.04 or kubuntu 10.04,we will catch little bugs .. they will interupt the new plymouth splash theme for a moment, and then the system will boot as a normally. Kubuntu was a little worse, after using remastersys to create a bootable live disc.. It seems that during the bootup of the live disc which I have created with remastersys using originally a fresh install of Kubuntu I see "Bios xxxx-xxxx errors" (I'm not 100% sure what they say, because they go by pretty fast) and I just don't know how to freeze the screen long enough to report exactly what is telling to repeat them here.. The bug that I get normally during bootup of Ubuntu is "Glib error" something to do with "non valid user".. Every-time I have installed it on my system or Virtualbox from a fresh install - after doing the updates and putting everything on it that I normally like to have for applications and codecs etc, I will start to see errors eventually creep into the Plymouth boot splash process. And I guess if there is no solution at this point, I would like to keep the 10.04 and revert back to 9.10's splash screen and back to when there were no errors.. Is this because of the new graphical drivers in 10.04? Any idea why is it is bad?
I doubt for some reason that I am the only user with these issues on a fresh install of either Ubuntu of Kubuntu, and I just want to know to know if there is anything I can do to help? I don't seem to find maybe people out there reporting this.. Maybe for the fact that we can't stop the screen from progressing to the next stage of bootup long enough to copy the errors to post them here. I don't know, but AFAIK the last version of ubuntu and kubuntu didn't have these problems with bootup.. Maybe with flash.. or maybe with something else. And many of those previous problem with solved with work-around, and just using different software or drivers or whatever.Again is there anything I can do to help? And how to stop the screen long enough to copy down my hand the errors I am catching during bootup? Or is there already a solution at this point to switch back to a older splash from 9.10 available, because in my opinion, the system is running flawlessly for my purposes, except the splash screen is coping errors I have never seen before since I first began using Ubuntu or Kubuntu
View 1 Replies
View Related
May 23, 2010
I can't get Ubuntu 10.04 to boot for install (to my desktop), it displays the logo then hangs for about a minute and displays the alert dialouge saying "Boot disk error."I've tried multiple CD-Rom drives, burned from multiple computers, with both the desktop and server downloads. I'm down about 10 CDs and 2 DVDs here I've checked their integrity (md5) as well as checked the disk integrity from another computer (laptop) and everything passed. I got xUbuntu to install effortlessly, so I don't know what's causing the problem for Ubuntu. I can even look at the contents of the Ubuntu Server CD from within xUbuntu -- so, I know the disk really should work.
My system specs are pretty basic:
2 x Xeon 2.0Ghz
Tyan S2720 Motherboard
2 Gig (4x512) ECC PC266 RAM
[code]....
why xUbuntu worked and regular Ubuntu won't, and/or maybe what I can do to fix this?
View 7 Replies
View Related
Jan 20, 2010
when i installed it the windows 7 Partition no longer works. I can see the windows 7 partition but when i click on it, it just reloads the grub boot loader. Im in college and need the windows 7 partition.
View 5 Replies
View Related
Aug 15, 2010
I use an IBM Thinkpad T30 with an ATI Radeon Mobility 7500 graphics card as my work machine, mostly at a desk, using a docking station to link it into a monitor. I upgraded to Lucid last weekend. When using the integral screen on the laptop the graphics have been fine, but when using a monitor I initially got some very poor contrast, brightness and gamma output, described in this bug.
https://bugs.launchpad.net/ubuntu/lu...ux/+bug/548709
According to the advice in that bug report, I upgraded the kernel, with Kernelcheck automatically updating me to 2.6.35-candela. Now, rather than poor graphics with the monitor it just hangs on the splash screen, displaying the words Ubuntu with the dots underneath.
Reading around, when similar problems have been seen in previous versions of Ubuntu it has been a graphics issue, which fits. One piece of advice I've seen quite commonly is to remove the "quiet splash" from grub, which I've tried but doesn't work. I am tempted to try and work through the different grub commands these guys used to tackle a similar problem with the live CD:
http://ubuntuforums.org/showthread.php?t=1472054
But am a bit reticent as I don't know what they all do.
As an aside, the 2.6.35-candela kernel brings up a bunch of errors on boot, described at the link below, but reading that thread they don't look like they would cause my problem:
http://kerneltrap.org/mailarchive/li...4591800/thread
View 1 Replies
View Related
Nov 27, 2010
I've just joined the linux gang(or I am trying to) I have
-downloaded desktop/netbook edtion
-burned to dvd using infrarecord
-changed bios settings to boot from cd
-didn't work
-used the override feature that gives a bootlist at splash screen but cd drive not listed so I assume the cd is not recognised as a boot disk
-tried the usb/cd maker that comes with in the rar but its looking for the cd image...an .iso file, but I can't find one in folder.
ubuntu says I can run a trial from the cd alongside vista but when I open the executable it just offers intall, no try and if selected starts to install I think I can do the partition thing if I have to but I don't want any vista running on my machine.
View 7 Replies
View Related
Jul 3, 2015
I have a thinkpad e440 with Debian Jessie installed. I use GNOME and thus systemd. Recently the laptop's battery stopped charging when the AC is plugged in. This could be several things, maybe I need to get a new battery (the battery is only a year old). However I need a computer for work, so I tried unplugging the battery and turning on the computer with AC plugged in.
The computer turns on, the grub menu appears, but after I choose the option to boot Debian grub shows the loading ramdisk (or is it the kernel or something like that? The two lines that grub shows after selecting Debian) verbose and then shuts off. When I plug the battery back in, grub is able to boot Debian. As my battery is running out I am not sure whether I will be able to boot when the battery life is zero. Is systemd just looking to make sure the battery is plugged in and then fails when it is not? I suppose I'll find out soon as to whether I can boot without battery life, but the battery plugged in.
With 0% battery I am able to boot into Debian as long as both the AC and the battery are plugged in. Battery still won't charge, but at least I can use my computer.
View 10 Replies
View Related
Dec 6, 2010
with the help of others (to whom grateful thanks), I've managed to get this distro installed and my PCMCIA Wireless card working without a LAN connection!Result......well it was for me!next big prob is sound.......any sound at all!This command sudo modprobe snd-cs4236 sometimes gives me some, just for the current session, if it don't want to play, it just ignores me!Two main questions,
1) How do I get the attention of the "Alsa Mixer"? (the GUI is normally just blank and may or may not be activated by the above command!)
2) Once I have the attention of the "Alsa mixer", how do I maintain it upon re-boot?
Some one guided me to this post and despite it's age, I appended my plea for help....but I fear it is not the correct place............I just hope I'm now in the right place.url
View 14 Replies
View Related
Dec 21, 2010
Has anyone done an upgrade like this on an IBM Thinkpad RXX WITHOUT serious problems? I do know that 10.04 has problems with Pulseaudio, since I do have it installed on my Dell desktop and Pulseaudio goes berserk occasionally and I have to power down the system and reboot. My laptop has a 1.5 GHz processor, 512 MB memory and is running just fine on 9.10.
View 1 Replies
View Related
Apr 2, 2009
when I tried to download a installation DVD of F10 for my new thinkPad T500 laptop.The architecture of the processor should be i686 and I downloaded the DVD image Fedora-10-i386-DVD.iso. I understand i686 has backward compatability with i386. But i have following questoins:
(1) why we don't have an installation for i686?
(2) If I install the i386 package, do I get performance downgrades?
(3) Also, why the live DVD has this file called F10-i686-Live.iso?
(4) Finally, I always get message like "Warning: Cannot convert string "nil2" to type FontStruct
/usr/bin/xterm: cannot load font -misc-fixed-medium-r-semicondensed--13-120-75-75-c-60-iso10646-1" when I use X application. What's the problem here? BTW, I used Fedora core 8 before I didnt have this problem.
View 3 Replies
View Related
Aug 26, 2010
Under 8.04 I did this to get the tap to select working on my thinkpad with a trackpoint in the keyboard. Is this still the same under 10.04? I'm not the greatest with the terminal so I want to check before I start a change.
Code: sudo apt-get install sysfsutils -Once that is installed, do; Code: gksudo gedit /etc/sysfs.conf -and add this line to the bottom, then save it.devices/platform/i8042/serio1/serio2/press_to_select=1 (several days later) OK, I went ahead and tried it and this is the way to get the trackpoint working - I originally had one too many spaces in the code but now I beleive the code as shown is correct for you people with a thinkpad (and maybe others) who want to use the trackpoint with tap.
AGAIN! Now it stopped working after a reboot. Does this command not make it permanent??
View 1 Replies
View Related
Apr 15, 2011
I just got a 14" Thinkpad Edge 0578 with a Intel Core i3 M390 CPU . I read [URL].. and i3 doesn't seem to be listed with the 64-bit processors though it's supposed to have 64-bit architecture (The machine came pre-installed with Win7 64-bit). I wanted to know if I need to install a 32-bit desktop version ( i386 ) or the 64-bit desktop version ( amd64 ).
View 2 Replies
View Related
Jan 23, 2010
I know there must be a way to fix this, but cannot find anywhere how to do it.Problem is when I start up machine, it stops at bootloader asking for language "English" and then "Try Ubuntu without any change to your computer" from screen as if I were running a Live CD or DVD installation.to skip this step so my USB boots normally like a harddrive?
View 5 Replies
View Related
Aug 16, 2009
I have been trying on and off for over 6 weeks to upgrade from fc10 to fc11. I keep getting the problem where Anaconda cannot format the HD. I originally downloaded the image and it fails when trying to format the fs even if I leave the original fc10 fs in tact I then used the LXF DVD and got the same problem.
I have tried both upgrading and new installs from an fc10 HD but it still fails to format.I have also tried formatting using fc10 (ext3) and have just read if I am using a live CD it must have an ext4 partition on it, but I assume it should be OK with the LXF DVD?I have been using Fedora for over five years now but if I cannot resolve the problem soon I will have to reluctantly change my OS, but before resort to doing this, could someone point me to any information that might help me to resolve the problem?I did try manually partitioning using gparted and ext3 without LVM but that also fails.
View 2 Replies
View Related
Jan 23, 2011
well I'll start by SPECS.
Processor: amd phenom II 965 BE
Motherboard: M4N78 PRO (Asus) newest bios
Memory: Corsair 2gb DDR2 800mhz X2 (4GB)
Video Card: Radeon 5750 1GB
Power: 620W Corsair.
HD: 320GB
I use the TV + HDMI cable. Versions tested 32BITS/64BITS (stay with x64) has no disk error. already downloaded several times. MD5 is correct well ... I'll start here with my concerns ... version 9.04 onwards does not work gives blackscreen. I think "forgotten" by the generic drivers for ATI or something that influences the video. it does not show. 9.10,10.04,10.10 none of those versions worked ... on other computers functioned normally. I found researching how to dribble and go to live. and thus unable to install. but does not work after the pc restarts. Linux does not. shows nothing ... goes to black screen with the (- FLASHING) but nothing else happens.
View 2 Replies
View Related
Jun 18, 2010
I have a TP T400 and wanted to use a bit of Linux. Installed Ubuntu 10.04 in my notebook using Virtualbox. The problem is that it doesn't recognizes the video chipset, which is a X4500 integrated graphics. After booting I receive an error msg saying that my video is not recognized and asks if I want to fix it. Dunno how to do that, so I cancel. After that I can only use 800x600, wanted widescreen (1440x900). Is there a simple way to fix it? Liked Ubuntu, wanted to use it.
View 4 Replies
View Related
Dec 30, 2010
I would like to install Ubuntu 10 on my Thinkpad T400, but would like feedback from other T400 users that have Ubuntu running on their laptops. First, will it recognize all my hardware? I hear most Thinkpad users had issues with video and webcam drivers, but that was with an earlier version of Ubuntu 8 through 9. So my plan is to have Ubuntu 10 as my primary OS on the T400 and use Win7 within VMware.
View 7 Replies
View Related
Jul 9, 2011
I installed the debian 6 on the tninkpad T42, use the Suspend,it can entry the suspend state，I type the key let it come back, it can exit the suspend state, But the screen always display "black",can't come back the X window.
View 2 Replies
View Related
Jan 18, 2010
just installed it with a duel boot with windows, installed it using a live boot cd that i burned. seems like everything is good except i have no wifi i tried to do an update and possibly get the fix and i get an error when trying to install the updates..looks like i have more issues than i thought.. did i mess up by installing from the live cd?
View 14 Replies
View Related
Jun 3, 2010
I tried to install Fedora 13 on X201 for a dual boot with Windows. Since there is no CD/DVD ROM on my laptop, I created a new logic partition and put the DVD iso image file of Fedora 13 on this partition. I also extracted the isolinux and image directories out of the DVD image and put it in the partition. I used grub for dos to try to boot to the installation. Here is the command I typed in grub console (For whatever reason, it did not recognize my menu.lst).
root (hd0,4)
kernel /isolinux/vmlinuz
initrd /isolinux/initrd.img
and then boot. The booting process went well until it reached "waiting for hardware to initialize", and then the screen turned black. I thought this happened because Fedora could not recognized (X201 has an integrated Intel HD Graphics adapter). So I tried adding different options to the line kernel /isolinux/vmlinuz , such as "kernel /isolinux/vmlinuz text", or "kernel /isolinux/vmlinuz xdriver=vesa nomodeset", and it still did not solve the problem.
View 5 Replies
View Related
Sep 22, 2010
I'm having trouble installing Fedora 13 (64 bit) onto my new laptop (Thinkpad T510). I've repeatedly tried the following three methods:
1) LiveCD I can boot into the LiveCD okay, and all hardware is detected. Double clicking on "install to hard disk" makes the disc spin a bit, but then it stops and nothing happens. At the same time the "application loading" cursor is displayed for a couple of seconds, then goes back to normal. Otherwise it acts as if I never clicked on the icon.
2) DVD The installation process goes as normal until it has finished formatting the hard disk. It then says an unhandled exception occurred, but gives no other info in the "details" section (it's blank). Pressing CTRL+ALT+F3 actually shows a description of the exception:
Code:
DBNoSpaceError: (28, 'No space left on device -- /tmp/storage.state: unable to flush page: 5')
Pressing CTRL+ALT+F4 shows a constant stream of error messages starting with "ERR kernel:" which are scrolling too fast to read.
3) BFO (boot.fedoraproject.org)
[code]...
Pressing CTRL+ALT+F4 shows a constant stream of error messages starting with "ERR kernel:" which are scrolling too fast to read.
I've used methods 2 and 3 to install Fedora on two other machines (with the same installation media as I'm using now) within the last week. The laptop is brand new and seems to run Windows okay (as well as Fedora from the LiveCD). I've tried resetting the BIOS to the defaults but that didn't help.
View 5 Replies
View Related
May 1, 2010
Ubuntu has been crashing on boot. I used a recovery mode kernal and went into failsafe mode, upon which point a msgbox told me to switch to low graphics. Then Ubuntu looked completely normal and functional with no problems. To me - an Ubuntu amateur, it seems like a driver problem and that running in failsafe mode will have its setbacks.
View 9 Replies
View Related
Jan 15, 2010
I have Fedora (12 plus some rawhide, but mostly 12 because I am not up to date) with the Nouveau driver. I tried to switch to the solar plymouth theme, but I only see the ASCII progress bar at boot. But when I shut down, it work nicely. (I have updated to initrd and menu.lst)
View 2 Replies
View Related
Feb 14, 2011
I have an Acer Aspire One AOA110 (SSD version that came w/ Linpus Lite) that my brother gave to me several months back when it stopped working. I've been trying various ways to revive it or make it useable, but haven't had any luck so I figure it's time to look to the community for ideas. I have already updated the BIOS to the latest (v3310) version, so I don't think it's the common issue these netbooks have where they don't even post. I'm kind of thinking the GPU died halfway or something. If I could just get it to work in a command line only mode, I'd be happy.
The netbook will post fine, but when I try to boot into Linux, the screen will go blank part way through the boot process. I don't ever remember hearing sound afterwards so I don't know if just the screen is blank or if the computer is locked up as well. I have tried several distros, but all of them seem to run into the same issue. Some with text based installers (Debian) get all the way through the install, but won't get all the way through the boot process. I'm only trying to get to a command line, not into X or anything graphical. Arch Linux also uses a text based installer, but I couldn't even get into the installer before the screen goes blank. I've tried changing some of the kernel options such as nomodeset, vesa and framebuffers options, but didn't have much luck with them either. I've also tried some older versions of Ubuntu (I think back to either 8.04 or 8.10) and tried the text installs, but I can't remember if I couldn't get into the installer or if I just couldn't boot, I want to say I couldn't even install. Mind you it's not random, it's always at the same point for a particular distro.
So the other small twist to this all is that FreeDOS works fine, besides not being able to get the sound card or network card working. I can play games, set different resolutions in ZSNES, etc. This seems a little odd to me, but I'm hoping it makes perfect sense to someone reading this.
I want to be able to run Linux with a command line interface, but I can't find the right distro/settings/whatever that it stays in the video mode (vesa?/framebuffer only?/I'm not even sure what to search for) where I keep the display and get to a command line. Any thoughts on what's happening when the screen goes blank or what I can do to get Linux working on here again?
View 4 Replies
View Related
Sep 1, 2011
I've recently upgraded to Natty (11.04).The problem that is now occurring, and reoccurring, is like this:- Computer boots, but hangs on a purple screen (nothing on it). Nothing happens, after 15 minutes or so I give up waiting and hard reset.- Boot via Grub (holding shift) into recovery-mode: works fine, but I want the GUI, so I reboot.- After reboot the system hangs again, as mentioned before.- Hard reset again, and booting a previous kernel (2.6.32.8 ): works fine!- Restart again, boots in most recent kernel (2.6.38.10): works fine now.- Try to shutdown/restart again, problem re-occurs every time. So I use the workaround with the extra startup with the older kernel again.and finally typing this.
View 1 Replies
View Related
Oct 16, 2010
I can connect to the internet on Win7 without issue. Boot to Ubuntu 10.10 amd64 & it works sometimes & sometimes it doesn't.
I've attached 4 screen photos; 2 when internet is working (Working ifcomfig & Working route -n) & 2 when internet is NOT-working (NonWorking ifcomfig & NonWorking route -n).
The 1st I notice when looking @ working ifconfig is line 3 under eth0, inet addr:192.168.1.5 Bcast:192.168.1.255 Mask:255.255.255.0, is missing on NonWorking ifconfig.
View 2 Replies
View Related
Nov 25, 2010
To start off, I am about 3 days into my new ubuntu operating system. I am a complete newbie, but i have picked up alot in the last couple days. My sound was previously working, but the microphone was glitching when using skype. After running a bunch of different commands in terminal that were posted on forums from all over the internet, I rebooted my computer to find no sound. I have searched the forums again and tried many different command lines in terminal to no avail. My system setup is found here: [URL]
View 7 Replies
View Related
Jan 8, 2011
I have tried searching for the same problem but can't find it. Close but not exact. I have a dell optiplex I use for internet surfing. I do a reformat every few months to get the junk off it.I do a reformat to clean the drive and load XP PRO then load ubuntu 7. or 8. It gives me the option to use either at start up.
I did it a few weeks ago and it has been running fine until I did updates of both XP and ubuntu. When I it fired it up Win XP worked fine but when I choose ubuntu I would get the corrupted or missing hal.dll error and it wouldnt go any further. Several reboots with the same result XP works but not ubuntu.I did a reinstall of the hal.dll file using XP disk for repair according to britec on ..... (but I didn' t do the second step yet).Now I still get the corrupted or missing hal.dll error when I try to get into ubuntu and if I choose XP it freezes. I try going into safe mode and it loads but (wireless) mouse/keyboard won't work.
View 10 Replies
View Related
