Having installed 9,10 onto a laptop my cherubic daughter swicthed off the power (no battery) and upon restarting i am faced with "Starting Init crypto disks... OK) and there it stops!! I had hoped that I could go to recovery mode and fix it but am faced with the same stalling point. I see others are unresolved in this.
View 2 Replies
I have/had a PC with several hard drives, and a mix of ubuntu and windows on multi boot.The old boot drive died screaming, and I need to start again. (But my data is safe! yay!)
Is there anything special about which drive can be the main drive to start booting from? Or to put it another way, can I install to any of the other 3 and expect it to work, or do I need to switch them around so a different drive is on the connections for the recently dead one?
I tried to install Ubuntu 10.10 Server 32bits and 64bits but each time the installer stopped at 45% during "Starting up the partitioner" with the message "Scanning disks".
I installed Windows 7 64bits on the disks without problem.
I installed IPCop 1.4.20 successfully.
However, I tried to install Fedora 14 32bits and 64bits but it also stopped (ie crashed the partitioner) during the "Install To Harddisk" via LiveCD.
Similarly, OpenNode 1.0 also crashed with a bug report that has alot of python error messages. All mean nothing to me.
I even tried to partition the disks first via Fedora 14 LiveCD. Still the same thing.
Has anyone encountered this sort of problems before? If so, any resolutions?
Could this be the problem with the SATA2 disks?
I've got this weird problem: when I reboot my Debian 8.3 server, I have to run through the crypto unlocking processes for my encrypted volumes a few times before I actually get to a login screen. The operation times out 85% of the time, leaving me to reboot and try over and over until the system is happy.
Here's my partitioning setup (manually partitioned at install):
/boot: 500 MB, EXT2, nodev, nosuid, noexec
/tmp: 2 GB, EXT2, AES-256/xts-plain64 with RANDOM KEY
swap: 2.5 GB, AES-256/xts-plain 64 with RANDOM KEY
/: 35 GB, EXT4, AES-256/xts-plain 64 with PASSPHRASE
/var: 35 GB, EXT4, AES-256/xts-plain 64 with PASSPHRASE
/home: 45 GB, EXT4, AES-256/xts-plain 64 with PASSPHRASE
Here's the output from journalctl -b -p 3:
Code: Select allDate and time | server name | systemd[1]: Timed out waiting for device dev-sda5.device
Date and time | server name | systemd[1]: Dependency failed for Cryptography Setup for sda5_crypt
Date and time | server name | systemd[1]: Dependency failed for Encrypted Volumes
Date and time | server name | systemd[1]: Dependency failed for dev-mapper-sda5_crypt.device
Date and time | server name | systemd[1]: Dependency failed for /tmp
[Code] ....
I had the same problem in previous builds where I chose Twofish instead of AES, and I was hoping that the timeouts would be fixed by switching to AES as my CPU has the AES instruction set. Obviously that didn't make a damn bit of difference.
What am I doing wrong, or what should I change in my setup? The encryption is a requirement. Could the problem be caused by something as stupid as using a RANDOM KEY instead of a PASSPHRASE on /tmp and swap?
Debian 8.3 as OS version.
I have experienced a failure in one disk in my 4 disk software RAID10setup, but a straightforward rebuild is thwarted by the fact that twoof the other disks are considered non-fresh and hence get kicked outof the array. This of course prevents the array from starting up.Here's more detail about my setup:I have 4 2TB SATA disks in RAID10.
Device Boot Start End Blocks Id System
/dev/sda1 1 243201 1953512001 fd Linux raid autodetect
/dev/sdc1 1 243201 1953512001 fd Linux raid autodetect
[code]....
i have this problem i install android sdk, and i install libreries: libstdc++5, lib32stdc++6, lib32ncurses5 and libstdl1.2-dev,
now if i use ldd comand don't have problem, but when i use eclipse and i compile a simple example (hello word example), i have this
error: [Emulator] SDL init failure, reason is: No available video device i have a notebook toshiba satellite A300-1RI whit ATI Radeon 3650, i install the amd driver and all work well.
I've installed Windows 7 onto one hard drive, and then installed Ubuntu 9.10 onto a second hard drive. The installations seemed to go fine, and I can boot into Ubuntu from the GRUB menu. However when I try to boot into Windows from the GRUB menu, I get a message saying "error: no such device: 446e94786e946488".
View 9 Replies View RelatedI installed an LAMP Server on 10.10. Additionally a simple Sambaserver and a VPN is integrated. Since 3 days I look at some strange behaviour:
Code: sudo init 6 does not take effect. Nothing happens. Code: sudo reboot is working, but all seems to be so ropy. It takes a significant while, before ssh-session is finally terminated. After the system comes up again, the vpn-client gets not the same IP-address by DHCP-server, but the next following of dhcp-range. That is strange, because no other dhcp-client is busy. After a second reboot I get the correct first IP-address of the dhcp-range. That is reproducible.
cron is not working any more. None of my jobs is being triggered. Nothing is logged in /var/log/syslog any more. Services (apache2, mysql, smbd) are not running at the start. I have to run them up manually. Seems like init is somehow smashed? What is your guess? What futher information do I have to provide for analysis?
I recently tried installing Lucid x86 on my system beside Windows 7 and managed to screw it up.
My disk setup is this;
Disk A = 3 partitions (1st partition=Windows 2&3 partitions=Data)
Disk B = 1 partition
Disk C = 3 partitions (1st partition=Data 2&3 partitions=Ubuntu & Swap)
Disk A = SATA and internal
Disk B = SATA to USB external
Disk C = SATA to USB external
I want to install Lucid on the 2nd partition on Disk C. And dual boot it with Windows on Disk A.
During Lucid setup i specified the partition for installation (C2) and asked for GRUB to install on Disk A (no partition specified) so GRUB is always used as the dual-boot manager even if the Lucid disk (Disk C) is ejected. Once installed and rebooted i was taken to the GRUB rescue prompt as no installation drive could be found (a long string of numbers (looked like a Disk ID number???) was also shown). Obvviiusly, i could not access either OS on my system at this point. I had my W7 DVD handy so it was just a case of recovering the windows boot manager and i could use my PC but how do i go about installing Lucid with this setup? Should i specify a partition for GRUB to install to? I have a hunch this is where i am going wrong but am too scared to try again and potentially balls things up.
While I was using my computer a few days ago, the terminal stopped working properly, so I tried to reboot, and when it started up again it wouldn't boot and said "no init found. try passing init=bootarg"
This has happened twice before, so I really need to figure out what keeps happening, otherwise I can't continue to use linux. i reinstalled both times before. i think that this is caused by a process that prevents me from using the hard drive, because when I try to check the disk in the terminal or in gparted, it says Device or resource busy while trying to open /dev/sda1. Filesystem mounted or opened exclusively by another program?
Also, in the disk utility, in the lower right corner of the filesystem it has a spinning "loading wheel".(i'm not sure if that means anything)
I am using ubuntu 10.10, but am not sure what kernel I am using, but i tried a few different kernel options(there's three of them at start up). safe mode does not work either.
I have a Lenovo TP W520 with a Nvidia Quadro 2000M (with support for Optimus)!I've tried to use the open-source optimus driver (Bumblebee), but found to many issues I had to deal with.both on 11.04 and 10.10) - therefore I've accepted the lesser batterytime... and choosed to run with "discrete" option in BIOS - setting Nvidia only mode!I can't use the 11.04, as I need iFolder (and can't get it to work with this edition, by the way I see the following problems on 11.04 too) - as a result I am using 10.10 (64-bit).
I have installed the Nvidia proprietary driver, and when attached to my dockingstation (connected to an switchbox) the laptop boots fine every time! But out of the dock, the laptop hangs at "running /scripts/init-bottom" during boot!To resolve this I've tried this (used the "nomodeset" option)... after this, it pass the "running..." every 4-5 timeAfter this I tried to upgrade the driver as described here... this may have helped - a tinytiny bitLast effort was to add "TPPS/2 IBM TrackPoint (MatchIsPointer "on")" and "AT Translated Set 2 keyboard (MatchIsKeyboard "on")" to "/usr/share/X11/xorg.conf.d/10-evdev.conf" according to this ... now it boot's fine every time... but at login, the login-box disappears and everything freezes! But if I choose "Safe Mode" i can login.
After upgrade to 10.04, my disks are randomly named (sda, sdb, sdc) at each boot. My drive labeled "XP" is sometimes named "sdb" and sometimes "sdc", while my other drive "DATA" is respectively "sdc" or "sdb". This wasn't the case before upgrade with KUbuntu 9.10.
Due to this random naming, my auto-mount in fstab often fail at boot time !
Any solution for this (not found here by myself) ?
Is this linked to Grub troubles reported many times here ?
I have a fully operational PXE boot server, the client boots up and begins the setup process however, fails to detect the hard disk, I have tried with ubuntu 8.10, 9.10 and 10.10 and none of them will see my hard disk, I boot to the cd and it sees the hard disks with no problem, so apparently the pxe boot server isnt serving up the neccesary drivers or something to detect my hard disks properly. They are just IDE drives and like I said, regular cd install detects my drives just fine.So if anyone here has any information that may help shed some light on this issue I would be so grateful
View 1 Replies View RelatedI have no hard drives in my computer, so I have been trying to boot Ubuntu 11.04 from an 8GB usb flash drive. Is this possible? So far the best result i have gotten is it will sit on the loading screen for a while then dump. I was only able to get the last little bit which reads mount. mounting /dev on /root/dev failed: no such file or directory. mounting /sys on /root/sys filed: no such file or directory. mounting /proc on /root/proc failed: no such file or dirctory. target file system doesn't have requested /sbin/init
View 4 Replies View RelatedRecently I tried installing Ubuntu via CD, I burned the Image like the website said, It booted then it gave a black screen saying init was not found or something in that nature. I tried a few more times with no luck. I am making another CD to see if it works, hopefully it will,. Its a relatively old HDD. It has Win 98 on it. 9.18 GB space.Quantum Fireball lct 10 3.5" series.
View 5 Replies View RelatedUsing 9.10 in dual-boot with XP:
Dell 600SC running an Adaptec 39160 dual channel SCSI controller which has 2 disks connected to it. The machine also has 2 IDE drives connected to it. The boot order of the disks is set to the SCSI disks as the first in boot order (after CD).
I am trying to set it to maximize performance from the SCSI config so I have XP on the first SCSI and I set up Ub 9.1 on the second SCSI in a dual-boot configuration.
In this set up the machine when rebooting goes straight to XP (on the first SCSI) and does not even see the Ub installation. The installation went fine and no complaints. On the same machine if I just had Ub on the first SCSI - machine boots fine (albeit after a long pause looking for the bootloader).
So with XP on the first disk (which I need to - to have XP) the Ub bootloader does not seem to set the right params to be able to boot.
Again this is with 9.1. Not trying 10.04 as with 10.04 I don't even get to boot even with standalone Ub (with no XP). However it installs fine but does not find bootloader in 10.4, so we will keep to the 9.1 for now. I am however open to working with 10.04 if there is a solution in dual-boot with XP in my config.
So again 9.1 installs fine with XP on 1st SCSI disk, an ub 9.1 on 2nd SCSI disk, but then bootloader does not get activated and machine goes straight to XP.
After having tested Ubuttu 9.10 on a VM with Win XP Pro as host and running both Ubuntu 9.10 and 8.04 from a CD/CDR drive I decided to do an installation of 8.04 on a separate HD and import files.Installation seemed to work OK, but on reboot: no menu was shown to choose OS and the machine booted directly into Windows.Tried to boot directly from the "Ubuntu" HD in the BIOS boot menu and get the message "MBR error" full stop literally.The Ubuntu hard drive is no longer recognised in Windows , can't be acessed from the DOS prompt and obviously cannot be reformatted from there.Just for the record, I'm not totally excluding operator error from the cause
View 9 Replies View RelatedOne of my disks in my computer crashed, it was the one containing /boot and some data partitions. The other system and /home partitions were on a second disk, which is ok.
I was wondering, can I create a new /boot partition, and keep on using the rest of the system? Can I somehow do it with a chroot from a live/installer disk, run grub, and use my system again? I have another disk which I can put in the system, but there is even an unused partition on the disk which is ok (but it is rather big for /boot).
I have tried doing the edit as described but all that happens is a new page opens up with a document titled menu.lst.
View 9 Replies View RelatedUbuntu/Linux operating systems. It installs just fine but after it reboots I get a "disk boot failure, insert system disk". I have searched around but I can't seem to find anything that works. There is only one hard drive in my computer and no other operating systems on it.
View 1 Replies View RelatedI have a triple boot system running Ubuntu, WinXP, and Win7.I had Ubuntu running fine on its own partition (sda1) but an upgrade from Karmic to Lucid turned it into a dog.So I tar-ed my /home filesystem, split sda1 into 2 new extended partitions, then did a clean install of Lucid with / on sda5, and /home on sda6.I should also mention that I have already tried re-installing Grub from a live USB to no avail.
View 7 Replies View RelatedI was happily running 10.04--- really worked fantastically! Then, I updated all, and upgraded to 10.10 using the upgrade manager in Ubuntu Desktop. Now, when I choose Ubuntu from the boot page, the computer shuts down--- no errors, it just reboots and I get right back to the boot page. I cannot boot into Ubuntu at all, and I am now stuck with Windows 7 once again.
View 5 Replies View RelatedI'm having a few problems getting my system to boot after upgrading to 11.04.This problem actually first arose when I upgraded from 9.10 to 10.04 a couple of weeks ago, however I found I was able to boot by loading a selecting a previous kernel version (2.6.31.22 was the latest version I could successful boot from) and as I was a bit busy with exams at the time I decided to leave it be temporarily as I at least had a functioning system.I upgraded from 10.04 to 10.10 and then finally to 11.04 today. The original problem persisted on the upgrade to 10.10 however I was at that point still able to boot using the older kernel version. On the restart after the upgrade to 11.04 however, the system now freezes when trying to boot from 2.6.31.22 or previous versions (the splash screen shows and then the system gets stuck on a blank screen with just a cursor visible, but remains responsive to mouse (cursor moves) and keyboard (goes into restart process on Ctrl-Alt-Del)).
I'm at a bit of a loss of what to do and would be massively grateful if anyone had any advice of where to start for a solution. I can access the system using a LiveCD - the output of the boot info script is attached.
When I install either desktop version of Ubuntu 9.10 or Xubantu 9.10 it boots ok when ask to reboot at the end of the install, but will not reboot after that (2nd attempt and all after fail)On 2nd and later attempts the grub menu comes up and I choose default Ubantu and the Ubuntu circle logo displays for about 30 seconds, and most of time I see it try to access my floppy drive (sometimes the floppy drive light stays on, sometimes it does not) a cursor then blinks in the upper left hand corner for about 10 seconds and then the screen goes blank and freezes there until I power down.
My System
Dell Dimension 2350
Celeron 1.80 G Hz
768 Meg RAM
30 Gig hard drive
Note: Xubantu installs OK to HD on another system I have, but not on this Dell. To test the Dell I did install Puppy Linux with default grub loader to HD ant it works OK (boots OK to HD each time).Side note: At first I tried this Dell to set up dual boot with XP and Ubantu and same symptoms Ubantu only booting OK once and then never again so I thought it was dual boot issue so I deleted all partions (XP is now gone) with latest GParted version and attempted installing Ubuntu 9.10 and then Xubanto 9.10 on the whole harddrive but still no boot past the first time I though this might not be a grub issue since it seems to get past grub and the Ubantu circle shows for about 30 seconds before the system freezes. only a guess on my part as I don't know enough about Grub or Ubuntu to troubleshoot without help. I see I can hit "e" to get to the grub editor and I looked at the grub boot code but don't enough about it to edit for a fix. I thought about Lilo but did not see an option on the normal Xbuntu ,or even when I used the alternate install CD,for a Lilo option. Also note I can run the live CDs for Ubuntu and Xubuntu OK on this Dell. Only HD install gives me problems.
After performing the periodic update on 2010-05-26 including libc, libc6 and libgtk2.0 my system fails on boot with the following error message:
Code:
run-init: /sbin/init: no such file or directory
Kernel panic - not syncing: Attempted to kill init! If I boot from the 10.04 live CD, all partitions on the hard drive are visible, mountable, and pass all file system checks.
I have 3 separate hard drives, I IDE and 2 SATA. The IDE has side by side installation of Windows XP and Ubuntu. The 2 sata drives each have Ubuntu only. I upgraded the 2 separate drives to 10.04. with no problems I then upgraded the dual boot Ubuntu to 10.04 and it would no longer boot I formatted the partition and did a clean install of 10.04 Thereafter the Ubuntu on the dual boot drive will boot but windows will not nor will either of the 2 separate drives. Results text from boot info search is attached. I can access the 2 Ubuntu drives through the funcitonal Ubuntu on the dual boot drive, but cannot boot them.
View 1 Replies View RelatedThis morning my update manager came up so I clicked to update. About halfway through the update an error message popped up & said to restart my system. I restarted my system and now have a black screen with the following message:
mountall: symbol lookup error: mountall: undefined symbol: udev_monitor_filter_a
dd_match_subsystem_devtype
init: mountall main process (344) terminated with status 127
I read around earlier & tried to use a Ubuntu disk and reboot but I have the same error.
I'm using a Dell Inspiron computer, it's just over a year old. I keep up with all the updates but unfortunately cannot say for sure which updates were taking place because I just hit the update box.
After I upgraded to 10.04 using the prompt for an upgrade. Ubuntu failed to boot. PC starts but during boot hangs after ubuntu symbol and screen goes black and PC overheats. Same problem when booting off CD. I removed HDD and rigged it up as a USB) but can't read the the disk in windows. The PC works fine using old windows HD. What do I do?
PC:IBM Thinkpad G40 (laptop)
Ram: 1Gb
After a kernel update ubuntu would not boot. So found this procedure using the live update cd. Update grub.cfg & delete everything down to but not including the first line that starts with 'menuentry' . Then boot works ok. A couple of weeks ago it started on my notebook. Is anyone @ hq listening & able to fix this problem permanently?
View 9 Replies View RelatedAfter buying a new PC, I decided to "reorganize" my former PC as follows:Initially it has been a dual (SATA) disk dual boot PC- one disk for each OS, while XP was fully installed on a single NTFS partition. Using Gparted I shrunk the XP partition, and created some Linux partitions. I've verified that the XP partition (sda1) is bootable. Afterwards, I removed the other (former Linux) disk from the computer. While doing so, I had to temporarily disconnect cables from both drives. Finally, I fresh installed Mint 9 (Ubuntu 10.04 derivative), on my pre-prepared Linux partitions. Installation completed flawlessly, and during the install, I've noticed that GRUB2 has been installed on sda. Rebooted and got "Disk boot failure" error.
I've checked the BIOS and noticed that the (single) drive was not recognized.
I manually tested from the BIOS and located the drive as IDE3. Saving the new configuration (F10) and rebooting- the HD gain is not identified (the CMOS battery is fine- keeps time).
Booting a live CD I can see and access all above partitions.
