Debian Configuration :: SDL Init Failure, Reason Is: No Available Video Device
Aug 11, 2011
i have this problem i install android sdk, and i install libreries: libstdc++5, lib32stdc++6, lib32ncurses5 and libstdl1.2-dev,
now if i use ldd comand don't have problem, but when i use eclipse and i compile a simple example (hello word example), i have this
error: [Emulator] SDL init failure, reason is: No available video device i have a notebook toshiba satellite A300-1RI whit ATI Radeon 3650, i install the amd driver and all work well.
View 1 Replies
ADVERTISEMENT
Jan 19, 2011
I use Sysv-rc-conf to turn on/off services. I initially turned off cups (I'm pretty sure it was on by default) using this method, but now I have turned it back on again, it won't start at boot. I have to start it manually each session. I've probably missed something but here goes anyway,
spoovy@dandelion:/etc/rc5.d$ pwd
/etc/rc5.d
spoovy@dandelion:/etc/rc5.d$ ll
[code]....
View 1 Replies
View Related
Aug 26, 2011
Is there any way to get libmp3lame to work with ffmpeg without me having to completely recompile ffmpeg? I have managed to get video capture working (huffyuv didn't work for some reason) and this is my command:ffmpeg -f alsa -ac 2 -i hw:0,0 -f x11grab -r 25 -s hd1080 -i :0.0 -vcodec libx264 -vpre lossless_ultrafast -threads 0 -vf 'scale=-1:720' -sameq out.avi
There are so many answers and questions all over the place I can't even tell which package is actually causing the problem... (libmp3lame0? ffmpeg? libavcodec*?)
View 9 Replies
View Related
Jun 24, 2010
My setup: Debian Squeeze;4 physical partitions, 3 of those create 1 volume group, 13 logical volumes within that vg; 1 unencrypted(boot); all others encrypted including swap.As stated in the man crypttab:The order of records in crypttab is important because the init scripts sequentially iterate through crypttab doing their thing.
View 2 Replies
View Related
Mar 23, 2011
I have a firewall script setup to run in rc2.d. There is a K99 for it and then an S99. The problem however, is that it isn't being called. No errors, no logs, nothing. The symlinks in /etc/rc2.d point to /etc/init.d/script, but nothing ever happens on boot or shutdown. I can manually do /etc/init.d/script start and it will start just fine, including printing a line that it is starting. What's going on here? The permissions are the same as the other scripts in the init directory, so I doubt that is a problem.
View 4 Replies
View Related
Sep 23, 2010
This is embarrassing. I can't get a wireless address from my router with dhclient. The distribution is sid/lxde/liquorix kernel with no network manager on /dev/sdb1.
root@sid:/home/jheaton5# dhclient -4 -v wlan0
Internet Systems Consortium DHCP Client 4.1.1-P1
Copyright 2004-2010 Internet Systems Consortium.
[code]....
View 14 Replies
View Related
Feb 19, 2016
I recently tried to install php5-gd package on my debian vmware server and it failed at libc6 - i386.
Afterwards every command other than CD caused a Segmentation fault and the server would no long boot, showing the following error
[ 4.808086] init[1]: segfault at 0 ip (null) sp bff4645c error 14 in init[8048000+8000]
[ 4.808372] Kernel panic - not syncing: Attempted to kill init!
[ 4.808442] Pid: 1, comm: init Not tainted 3.2.0-4-686-pae #1 Debian 3.2.65-1
View 0 Replies
View Related
May 28, 2011
I installed the latest Debian on a computer to make a backup appliance. No GUI.When the computer starts, everything is okay. The DHCP client is running, the network interface have an address, fine.If I do a /etc/init.d/network restart (or stop + start), no more DHCP client. t is stopped when the interface is down. When the interface is up, I have to start it manually.1 - is it normal ?2 - isn't ifup's job to launch the dhcp client ?3 - can /etc/network/if-up.d be the right place to resolve this ?
View 4 Replies
View Related
Jul 30, 2011
I'm trying to make a script that loads at boot and asks for user input before doing it's stuff. So I created a script in /etc/init.d/ following the example given there (skeleton file) and used update-rc.d to make it load before GDM.
But when my script requests user input, init doesn't stop, and goes on loading other services and loads GDM. I have to CTRL+F1 to get to my script. I want my script to pause the init system till it ends doing it's stuff and the the other services can go on loading.
I tried
#X-interactive: true to no avail.
View 1 Replies
View Related
Aug 5, 2010
I'm a beginner + in debian (ie I know how to launch basic command under a shell), and I very new to configuration problem.I have a running perfectly file server for probably more than 2 years that I never touch. That's the debian problem, when it's unning, it's forever, no reboot at all.I recently bought 2 new sata drive 1TB5, that I add to my system by adding to my old system a SATA PCI board without any problem.But, one of these 3 month old drive is already dead.So I try to replace it and that's where problem started.....First I did a#mdadm --manage /dev/md1 --remove /dev/sdb1, of course without sucess because sdb is dead
#mdadm --detail /dev/md1
/dev/md1:
Version : 00.90.03
[code]...
View 14 Replies
View Related
Oct 13, 2010
Lately I'm encountering a somewhat annoying malfunction: almost every boot, my desktop is stuck, HD red led is constatnly on, and i get a message from kerneloops that I had a kernel failure. I can move the cursor a little and slowly or not at all. Few violent reboots and I get a clean boot. Running Debian Lenny kernel 2.6.26-2-686 on a Pentium 4 2.0 GHz with 250 MiB ram.
View 4 Replies
View Related
Aug 15, 2011
I am experimenting with installing a bare minimum, network capable installation of Debian Squeeze. Right now, I am having trouble getting proper host name resolution. I have provided the output of ping (which is able to resolve names), wget (which is unable to resolve names), and the contents of the files I believe to be relevant to the problem. When I installed Debian, I installed *only* the SSH Server from the list of available configurations. Since then, I have installed mdns4, dnsmasq, mdns-scan, and libnss-mdns to get name resolution to work with no success so far. All packages were installed with no recommends -- aptitude -R package name. What am I missing to get host name resolution working?
[Code]...
View 12 Replies
View Related
Feb 3, 2016
I'm testing to log in using openldap authentication on jessie by following article from [URL] ..... and when I try to log in from ldap client (another debian 8 VM), it failed with
Code: Select allFeb 3 09:25:33 clt nscd: nss_ldap: could not connect to any LDAP server as cn=admin,dc=test,dc=lab - Can't contact LDAP server
Feb 3 09:25:33 clt nscd: nss_ldap: failed to bind to LDAP server ldap:///192.168.191.120: Can't contact LDAP server
Feb 3 09:25:33 clt nscd: nss_ldap: reconnecting to LDAP server...
Feb 3 09:25:33 clt nscd: nss_ldap: could not connect to any LDAP server as cn=admin,dc=test,dc=lab - Can't contact LDAP server
[Code] ....
test result from client with ldapsearch
Code: Select all# ldapsearch -h 192.168.191.120 -D cn=admin,dc=test,dc=lab -W -x -b 'dc=test,dc=lab' 'userName=*'
Enter LDAP Password:
# extended LDIF
#
# LDAPv3
# base <dc=test,dc=lab> with scope subtree
# filter: userName=*
[Code] .....
View 1 Replies
View Related
Sep 17, 2015
I'm new to Debian and installed it with Cinnamon because I want to learn some OpenCL programming in Linux. I have a Nvidia GT 525M GPU. Once the operating system is installed, I followed [URL] ..... article to install the proprietary Nvidia drivers. As the forum suggested, instead of creating an Xorg server configuration file, I installed Bumblebee according to [URL]..... article.
But when I restarted my machine after completing all the steps when I try to log in I get the follwoing message:
"failed to load session 'cinnamon'"
I cannot login as normal user or root.
View 1 Replies
View Related
May 10, 2011
I've just installed 'Testing' on a VMware server and after I completed the install with no problems, the system booted into the kernel and I noticed the following start up process error:
startpar: service(s) returned failure: udev...failure!
I have not seen this before and am not sure if it's related to the fact that this is a virtual machine and not a physical server or something else.
Here is a Screenshot.
View 1 Replies
View Related
Jul 29, 2011
I am trying to login as root but i end up with an error that says: su: Authentication failure
View 10 Replies
View Related
Sep 17, 2009
Since May 12,2009. Our system lifekeeper has the error log "lifekeeper error: DEVICE FAILURE on SCSI device '/dev/add'", but it ran normally. Until last week, it failover to the standby server. The disk still running, the error still come out.
View 3 Replies
View Related
Feb 11, 2011
brand new Squeeze box built toady - I'm trying to install a init script and I want it to start last and only in runlevel 2...
The script "test" is executable and located in /etc/init.d
so I run update-rc.d -f test start 2 95 - I expect /etc/rc2.d/S95test but instead get S01test
On my Lenny boxes symlinks in /etc/rc2.d are in the S10 - S99 range but the Squeeze box has the same services in the S01-S06 range?
Did something change in Squeeze?
I also tried creating the symlinks in rc2.d manually but the script never ran...
View 12 Replies
View Related
Mar 15, 2016
Debian Version: 8.3 (Jessie) KDE (although this is NOT a desktop issue)
Basic Hardware:
Gigabyte Motherboard GA-970A-D3P
AMD 8350 CPU (8 cores)
32 GB DDR3 RAM
120GB SSD SATA-6GB/s
750 WD Black SATA-6GB/s
I am getting "Error: No space left on device" regularly during updates or installs, but why. Here is data on the disks, filesystems, etc...
Code: Select all df -h
Filesystem   Size Used Avail Use% Mounted on
/dev/sda1Â Â Â Â 81GÂ Â 27GÂ Â 50GÂ 35% /
devtmpfs     16G   0  16G  0% /dev
tmpfs      16G  76K  16G  1% /dev/shm
tmpfs      16G  18M  16G  1% /run
[code]...
Seems very doubtful that inodes are the killer.I have googled and followed all the threads, and search these forums and found nothing that fits - every answer there was focused on avaiolable space and inodes..And to make the cheese even more binding, the issue has cropped up on another 8.3 system with far more disk space (larger hard drives) and lots more unused inodes
Code: Select alldf -h
Filesystem            Size Used Avail Use% Mounted on
/dev/dm-0Â Â Â Â Â Â Â Â Â Â Â Â Â 907GÂ 6.6GÂ 855GÂ Â 1% /
udev                10M   0  10M  0% /dev
tmpfs               995M 9.2M 986M  1% /run
tmpfs               2.5G  76K 2.5G  1% /dev/shm
tmpfs               5.0M 4.0K 5.0M  1% /run/lock
tmpfs               2.5G   0 2.5G  0% /sys/fs/cgroup
[code]...
View 11 Replies
View Related
Apr 3, 2010
I've been testing Squeeze to determine whether KDE4 is finally suitable for my primary machine. Everything seems to be working fine except for detection of IDE devices. My CD/DVD drive no longer automounts and the reason seems to be that no device is being created. My Lenny system detects the drive as /dev/hda, but no such device exists in Squeeze. During boot, Squeeze appears to detect the drive as /dev/sr0 (according to dmesg), but in fact that device does not exist either.I'm actually running the Lenny kernel, as I am unable to compile my Ralink wireless driver (rt2860sta) using the Squeeze kernel. Also, for inquiring minds, I use removable HDD drive bays on my systems to simplify testing.
View 9 Replies
View Related
Sep 24, 2010
I run a program (findknxusb) to scan for devices on USB, but the device is not found.
The debugging level for libusb is on:
$ ./findknxusb
Possible addresses for KNX USB devices:
libusb_set_debug...
libusb: setting debugging level to 1 (on)
libusb_init...
[Code]....
View 1 Replies
View Related
Oct 5, 2010
I installed Debian Lenny on my HP Laptop - dv6-2120ed. Because i have atheros wireless card i needed to install ath9k which is not supported in 2.6.26 kernel so i compiled it to 2.6.32. Everything is good, but when i boot the new kernel i get "Bar 6: No parent found of for device" for 2 devices - the ethernet LAN card and the sound card. After 1 minute waiting the kernel starts booting and everything works fine (the LAN and the SOUND card too). How can i fix this and what means it exactly?
View 2 Replies
View Related
Dec 8, 2010
The computer networking works fine with a normal static setup, but adding a USB wireless device is not successful. It is my own network so the wpa-ssid and wpa-psk are known to work with Lenny and a previous wireless device.The device is recognized (lsusb) and the driver is confirmed to be in the kernel (lsmod). Here is the iwconfig output:
wlan0 IEEE 802.11bgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
After typing: ifconfig wlan0 192.168.1.144 up I can ping that address, but it is not working. I have just done a fresh install of Sid so that I could get the 2.6.35 kernel which contains the ath9k_htc driver for the USB wireless device that I am using. The firmware is ar9271.fw but my source of that is questionable because it does not seem readily available. I am temporarily using a PCMCIA wired connection which is what I am using to connect to the computer via telnet. (This is just for convenience so as to avoid getting up all the time.) Here is the ifconfig output:
eth0 Link encap:Ethernet HWaddr 00:40:05:07:d9:11
inet addr:192.168.1.122 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::240:5ff:fe07:d911/64 Scope:Link
[code]...
That file works with the previous USB wireless device under Lenny. Am I doing something wrong or is the driver and firmware just not up to snuff yet?
View 5 Replies
View Related
Mar 16, 2011
I newly installed Debian 6.0 I choose for the 2.6.32-5 686-bigmem kernel because I have 6Gb of RAM Now I want to use Cool n Quiet When I try to do modprobe powernow-k8 I get a 'no such device' message I have an Athlon64 X2 6000+ cpu. Am I using the correct kernel for this?
View 1 Replies
View Related
Aug 3, 2011
I've recently installed Debian. But the wireless network is not working. In Gnome it says "Device not configured" And if i try a ifup it says: root@accroft-msi:/home/accroft# ifup wlan0Internet Systems Consortium DHCP Client 4.1.1-P1Copyright 2004-2010 Internet Systems Consortium.All rights reserved.
Listening on LPF/wlan0/My mac address here
Sending on LPF/wlan0/My mac address here
Sending on Socket/fallback
[code]....
View 13 Replies
View Related
Jun 19, 2015
I've been having a problem with Bluetooth on Debian 8 Jessie i just can't connect to any bluetooth device, i have only tested my smartphone and my bluetooth headphones, i am using blueman manager.After attempting to connect to my bluetooth headphones/smartphone it just disconnects and says "Connection Failed: No such file or directory",i don't know if i have to create a config file or something, the error message doesn't say anything but the error previously mentioned.
View 7 Replies
View Related
Sep 18, 2015
I have a problem activating the hotspot on my debian 8. The issue is that I can't activate the hotspot to give other devices wifi connection.
I have the correct driver packages from the non-free repositories (firmware-realtek) and this service (hotspot) worked fine on distros like Ubuntu, Mint and Fedora .
I tried hostapd but it didn't work. I'm using cinnamon desktop.
View 0 Replies
View Related
Oct 11, 2010
My os is debian 5.0, netcard is RTL8168D/8111D. I can't use the Static ip, if I setup static ip, output "not found network device", but the network driver have loaded and if I use DHCP mode everything is ok. do you understand my english? What my next steps should be?
View 7 Replies
View Related
Jan 7, 2011
I'm not sure if this is a bug in Squeeze beta 2 or if it's something I've overlooked. I have a Maxtor 250 GB external USB drive that I use for backups. It gets auto-mounted fine, always in the same place, and from my normal user account I can write to it, even delete directories on it if I want to. But when, from Gnome, I select the "Safely remove" option, I get an error to the effect that it can't stop the device. The weird thing is that the thing actually *is* unmounted. I've checked the mount point and it's no longer there.Is there some package I maybe should've installed but haven't? I'm not really worried about data loss, since I'm sure the drive wouldn't unmount unless it was properly synched; it's just the error message that bugs me.
View 2 Replies
View Related
Feb 11, 2011
I'm configuring a machine with Debian 6. I booted from the DVD, took the defaults, and it eventually came up with a Gnome desktop. Everything worked as expected.
I then installed gcc, g++, the Debian kernel source, and built a new kernel with preemptive multitasking turned on. It built clean, I ran "make install" and it put the kernel files in /boot. I rebooted and got a kernel panic error, to the effect that it couldn't find the root filesystem.
/boot/grub/grub.cfg shows
"linux /boot/vmlinuz-2.6.32-5-686 root=UUID=1890437b-5884-4b83-97cf-62d39f63c872 ro single"
for the original install, but the entry for the new kernel has
"linux /boot/vmlinuz-2.6.30DW-preempt root=/dev/sda1 ro quiet"
/etc/fstab has
# / was on /dev/sda1 during installation
"UUID=1890437b-5884-4b83-97cf-62d39f63c872 / ext3 errors=remount-ro 0 1"
I've tried changing the grub entry to UUID, but the new kernel still panics. grub-mkconfig and update-grub just rebuild the split UUID=/sda1 grub.cfg. The new kernel still seems to be looking for /dev/sda1 even after changing grub.
View 5 Replies
View Related
