I've searched around but did not get any good tutorial that can explain me hoe to do this. I installed ubuntu 10.10 in hd0,sda7 file system ext4.installed burg for better ui.Everything was working fine since I reinstalled windows in c: drive (that is hd0,sda1). How can I restore burg?
View 1 RepliesI just installed Win7 (I need it for work -.-") and, of couse, it installed its boot loader and I can't boot F13 any longer. The question is, how do I restore GRUB from a F13 live installation media without destroying Win7?
I remeber trying something like that a couple of years before when I had the same issue:
Unfortunatelly, that doesn't work and at the next boot I am stuck with Windows again how to restore grub from a F13 live CD?
Edit: I have a Sony Vaio FJ170 laptop with Phoenix BIOS version R0060X6 & a broken DVD Drive. The BIOS doesn't support booting from USB (it does have 'External Drive Boot' option, but my USB stick doesn't get listed under boot devices in BIOS when connected to the laptop).
A few days ago I upgraded to Windows7, then installed Lucid through WUBI. With the help of another thread of mine (here), I changed the default boot option & timeout of Windows to zero to directly boot into Ubuntu. So far it was good. But recently I tried to get back to Windows for some reason but could not succeed as the F8 key no longer brings up the Window's Advance Boot Menu.
Is there another way to restore the dual boot menu timeout to get back to the Windows installation. Or even better, is there some way to make a fresh install of Windows & Ubuntu side-by-side without DVD drive. I am only 14 and absolutely new to Linux. The network booting methods given on the Internet were too complex for me to understand. I like Ubuntu but also need Windows for programming C++ & Photoshop CS4.
Just installed Ubuntu 10.10 onto my new netbook from a USB stick. The laptop came with Win7 Starter, which I kept on a small partition. Installation was apparently successful, but when I start up the computer, it will go straight to Win7 and GRUB doesn't appear.
View 9 Replies View RelatedI had vista installed, then I installed Win7 on a dif. partition. Then I installed Ubuntu 11.4 over the vista partition (formatted first), and now I can't get into Win7. I'm really at a loss. I've tried the Win7 disk, and it doesn't detect the Win7 installation. I've also tried sudo update-grub, and it doesn't seem to detect the win7 install either. I've tried making the Win7 partition bootable using gpart as well. I'd like to dual boot Win7 and Ubuntu, however I need to do that.
View 9 Replies View Relatedi installed ubuntu after windows 7 but now i cant boot windows 7 i tried the start up repair and I've read through some questions answered on here and int figure out the problem i don't want to uninstall ubuntu unless it's my only option
View 9 Replies View RelatedThought BURG would be cool so I installed it. Something is very wrong. (See attached photos) all I get is the 1st photo, BURG version 1.98+20100623-1+karmic. If I tab I get photo 2. At this point I'd be happy just to restore GRUB2 & forget BURG but I can't even boot to any OS. I haven't had Ubuntu on this PC for long so maybe the best, or simplest option, would be to re-install Ubuntu- which would rewrite grub2.
View 9 Replies View RelatedAnyone know of or use this NEW boot-loader (burg)instead of grub or grub2?
View 4 Replies View Relatedi ve some issue with burg on my inspiron14(core i3 ATI4330). i ve followed tutorials which i m posting here too.pls tell me whats wrong with my system
[Code]...
I just recently stumbled upon a post on OMG Ubuntu about installing Burg [URL]so i went and tried it.all of the steps went alright, until i typed in
Code:
sudo burg-install �(hd0)�
where i replaced "(hd0)" with "/dev/sda1"
[code]....
Ubuntu Lucid 10.04 Beta 2 64-bit
Dual-boot with Windows 7 Professional 64-bit
Compaq CQ50-215NR laptop with 3GB system memory, 1.9GHz Athlon X2 QL-60 dual-core processor, nVIDIA GeForce 8200M G, 160GB HDD
Today I decided to install the BURG bootmenu on my computer so that I could enjoy nice, pretty graphical bootmenus instead of boring old text-based ones.I installed and configured BURG using this tutorial(after some few snafus wherein I tried to use older tutorials and went through many needless complicated steps that didn't end up working anyway).Restarted, and it worked great - except for one thing. Windows would no longer boot.It would get to the "Starting Windows" screen, then about halfway through there it would flash and restart.It wouldn't start in "Startup Repair Mode" either (the same thing happened). So, I did some frantic googling, and discovered this thread. I followed a set of instructions posted therein to install Lilo, reconfigure my MBR to Windows' liking, and reinstall Grub2.Windows booted after that.Well, I thought that the problem must have been caused by one of the numerous false starts I made while trying to get BURG installed, so I installed BURG again, set it up again, and bang - Windows wouldn't boot any more.So, I re-did the MBR with Lilo again, only this time I forgot to reinstall Grub2 (oops!) and had to boot from my LiveCD and install it thataway.At any rate, I'm fairly certain that installing BURG is what's keeping Windows from booting.
I'm trying to get a fresh install of Ubuntu 10.10. I've used unetbootin to write the image to a usb flash, but every time I try to boot from it I just get the burg splash screen. I've changed the boot order in bios and so on, but it starts burg all the time. The image md5 is also right.
View 5 Replies View RelatedI have 3 linux partitions
/
/boot
swap
Here's the story
1) was running ubuntu 10.10 64bit with burg
2) Installed windows 7.. it got removed.
3) So boot via ubuntu usb and ran
sudo mount /dev/sda7 /mnt/home
sudo mount /dev/sda4 /mnt/boot
sudo grub-install --root-directory=/mnt/boot /dev/sda
reboot
now its stuck at grub> .. I am unable to fix this issue How can I get my grub / burg running again with windows as option currently to boot i do
grub> root (hd0,1)
grub> chainloader +1
grub> boot
I am sure I have grub2
I have a duel booting system, Ubuntu 11.04 and Windows 7. I have installed burg. I have ended up with text when booting ubuntu. When I changed the splash it only show on shut down. How can i make it show on boot?
View 3 Replies View RelatedI installed Ubuntu Lucid Lynx a while ago. but then upgraded it to 10.10
I don't have the CD with me right now and i need to fix some mistakes of mine (being a n00b to ubuntu) urgently i.e. i can't wait for morning. Is there anyway i can rollback to the time when my ubuntu installation was in mint condition?
One more thing. Let me tell you my mistake. Almost a month ago i installed Apache2 on my Laptop (for LAMP). and now i have to install Apache Tomcat for JSP development. but the problem is that the files made by Apache2 and the PHP5 installation i made are not removed with
Code:
Code:
So now the apache2 files are superseding the Apache Tomcat. hence i cannot distuinguish between apache2 or apache tomcat when i goto:
Code:
So if anyone has a way of ridding my laptop of this disease without complete overhaul, please post your replies here.
Until then, I will have to defect back to Windows.
I've been dual booting Ubuntu and winxp for a few years and the Ubuntu installation in my machines has always been a matter of a few clicks, with Ubuntu recognizing my current xp installation and offering to repartition my disk to have both OSs coexist.I recently bought a new laptop (HP dv6t, win7 x64) and while trying to install Ubuntu 11.04, the installer informed me that I would have to get rid of win7 to install the new OS.
What happened to the friendly installer? Is there still an easy way to set up a dual boot in a system in which win7 is already present and an installation cd for it is not available?
Hardware issue forced me to restore Win7. Installed EasyBCD to boot into openSUSE, no work. Boot puppy, it shows space where SUSE should be as unallocated space. I think Puppy doesn't see ext4 though. Can't boot live KDE off USB for some reason, though I originally installed from that exact medium. Tried ACPI=off and nomodeset. Error says trouble mounting clic filesystem, mounted as read only. Something like that. Then reboot 120secs, which it never actually does. I don't want to reinstall SUSE if I don't have to.
View 9 Replies View RelatedI want to know how should I install for dual boot on new harddisk, because in my previous new harddisk win7 formatted it as a dynamic drive (partition) which cant be read by ubuntu.
View 6 Replies View RelatedHas anyone played with Burg? I'm a bit apprehensive about trying it.This laptop had 10.10 as the only OS but I shrank the partition and installed 11.04 in the empty space.So 11.04 re-wrote the Grub with itself at the top of the list.So now I have 10.10 in sda1 and 11.04 in sda6.Do you think that Burg will cause any problems?
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================[code].....
I installed Windows 7 First then give partition space of 25 GB for my Ubuntu. However, I prefer using Windows 7 BootLoader instead of using Ubuntu BootLoader.
View 4 Replies View RelatedI made the MOST basic of errors. I had ubuntu 9 installed on a partition of my netbook HD that was primarily running w7. I was running out of disk space and decided to remove the ubuntu partition as a short term measure - however I didn't change any of my GRUB settings so now I can boot into anything...
In only get a GRUB RESCUE> prompt on trying to boot. From searching the internet I've come to the conclusion that my MBR is F%^ked and need to restore it. I've downloaded ubuntu 10 and can run it from a mem stick, but I cannot get the ms-sys package to install - I keep getting the following error.
ubuntu@ubuntu:~$ sudo apt-get install ms-sys
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package ms-sys
ubuntu@ubuntu:~$
Is there another way of removing GRUB completely? Or is there something else that I can try to successfully install ms-sys?
What is the preferred bootloader with Ubuntu 10.04 and windows 7, when multiple booting also with Vista and XP all on one hard drive and each on separate partitions? All are installed except Ubuntu and now boot with the windows boot manager. I have heard that if you install grub 2 on the MBR, then boot windows 7, that it will replace the grub boot code with windows boot code automatically. So is it best to use that NeoSmart EasyBCD tool to add Ubuntu in to the windows boot manager, and can I install grub on the boot sector of Ubuntu's root partition ?
View 9 Replies View RelatedI cannot get windows 7 to install with my DVD its damaged, I have an iso downloaded and was wondering if there any tools that I can use from inside ubuntu 10.04 to get it onto and boot from a usb?
View 10 Replies View RelatedI bought a new computer (laptop HP DV6-1375dx) and I want to set a dual boot with win7, like I did with my desktop (clean install) However, my question is, with the new laptop all I have is the rescue disks vs. having the single OEM version. IS that a problem? for the desktop I followed lifehackers article "Dual boot win7 and ubuntu in perfect harmony." no problems at all.
what I am afraid of is formatting the new hard drive and the recovery partition and not being able to use the disks for some reason....am I over-reacting?
I successfully installed windows 7 and ubuntu 9.10 and both working great together, after a while and installing some programs in ubuntu like pysdm and ntfs-3g. I even logged out and in several time successfully. But when I shut down the pc and open it again, the following two errors show up:
init failed to spawn mountall-shell post-stop process:unable to execute permission denied.
init:job-process.c 529: unhandled error from job-process-spawn permission denied.
My windows 7 still working but what about ubuntu. My volumes are Ext4.
So, I just installed Ubuntu 9.10 in a different disk partition than where Windows 7 is currently installed. So, can I just go ahead and format the partition which contains Win7? Won't that compromise Ubuntu's integrity?
View 8 Replies View RelatedUntil very recently I was running Ubuntu 9.10 (Karmic Koala) installed on a 20 GB hard disk and Windows XP (SP3) installed on RAID 1 array of 2 x 250 GB disks, very happily along side each other and using GRUB as the bootloader installed on the smaller 20 GB drive.
I have decided to upgrade to Windows 7, and was struggling with the installation failing with the seemingly quite common "Setup was unable to create a new system partition or locate and existing partition" error. Google seaching suggested unplugging my Ubuntu drive and then installing Win 7. This worked fine with the Ubuntu drive unplugged, however with the 20 GB plugged back in I can boot to GRUB, but it still has XP in the menu, and no option for Win 7.
I think I could get around the issue by re-installing Ubuntu, which would place GRUB on the MBR which is now on the 250 GB RAID 1 array, but I would rather have the system as it was before with GRUB and Ubuntu on the 20 GB drive.
I know I need to edit GRUB to remove the XP entry from the menu, but I have no idea how I would get Win 7 into GRUB, and what to do about the MBR which Win 7 put onto the RAID 1 array.
I had 9.10 installed for a long time as a dual boot with win7 on this computer. I mostly use win7, but today i went into ubuntu and it said there was a new version available so i installed it.the error occured with the grub installation. it said if i was unsure of where to install it, i should install it on all drives, so I did. ever since then i've been looking online using this liveCD to find some solution to fix the problem, but I cant.here is what i've tried:
1. i downloaded a windows 7 repair disc and used the bootrec.exe /fixboot and /fixmbr commands, but this ends up with a blank screen with a cursor blinking.
2. I've tried re-installing grub, but this ends with the boot freezing at a screen with something like: "sh:grub>" and i can't do anything.
3. I've tried testdisk but this also didn't work for me.
i've been trying to fix this problem for 7 hours now but nothing. so i'm hoping maybe someone here would help my specific situation out.the current status of my computer: i have uninstalled grub in sda1 and sda5 (my ubuntu should be in sda5) and i used the windows7 repair CD to /fixboot and /fixmbr, so now when i boot, it freezes at a blank screen with a blinking cursor. anyone can help me, please?
because I formatted the linux partition where the ubuntu install was, and I can't install it again. If I start wubi, it tells me please first uninstall. I go to the uninstaller, it pops up with an error:
"Error executing command: command=C:...cdedit.exe /delete"
..here comes a registry key...
"stderr = An error occured while attempting to delete the specified entry. The system cannot find the file
[code]....
I'm trying to create a dual boot with ubuntu 10.10 on my acer laptop with windows 7. I looked at my hard drive and I found out that it has three partitions, one called System Reversed, another one called PQSERVE or something like that (which is a recovery partition since acer laptops dont have a recovery cd), and the third partition is C:.
So I shrunk my C: drive, and created a 44gb partition for ubuntu, and a 6gb swap. I then booted with the ubuntu cd and went into manual partitioning. I selected the 44gb partition as "/", and set the 6gb partition to swap. The problem is at the very bottom of the partition manager, where it says "Device for boot loader installation". I get several choices, and I'm a bit unsure which one to choose.
The choices are as follows:
/dev/sda ATA WDC WD5000BEVT-2 (500,1GB)
/dev/sda1 Windows Vista (loader)
/dev/sda2 Windows 7 (loader)
/dev/sda3
/dev/sda5
/dev/sda6
My first thought was of course why do I have a vista loader? I don't even have vista!