Ubuntu Installation :: Remove GRUB Reference To USB Drive
Jan 21, 2010
I was trying to load up Ubuntu 9.10 on a thumb drive to load look at the files on a computer with a dead disk drive, I couldn�t boot up on the other computer, but that�s another story (yes the drive was marked as bootable)
When I restart my laptop whose diskdrive I used to install Ubuntu onto the USB drive, I get a GRUB error �No such device and can load anything unless I plug back in the USB drive. When it is plugged in, the USB boot is the primary (1st in the list) boot. I tried editing the .lst file on my laptop�s drive but it only has its kernels listed. Anyone know how to make my system quit looking for a USB mounted kernel? Or at least not fail if it can't find one.
View 9 Replies
ADVERTISEMENT
Feb 17, 2009
I multiboot with Suse Linux 9.2 with kernel 2.6.8 & Windows XP on my hard drive. I want to know how can I remove grub boot loader from the MBR of my hard drive safely to keep Windows XP running with no problems?
View 2 Replies
View Related
Aug 17, 2010
when my grub references the UUID for the root= parameter, I get a kernel crash. If I change the root= parameter to /dev/<partition>, grub boots without a problem (f13 64-bit)
[Code]....
View 8 Replies
View Related
Jan 19, 2010
I have installed Kubuntu on a usb stick. I installed version 9.04 from a disk that came with linux magazine. After installation I can only boot pc if the usb stick is plugged into pc before I turn it on. I then gat a menu with 5 options. The first is Kubuntu and the last is Windows XP. If I try to boot my pc without the usb stick plugged in I get a GRUB error message.
I think this is the GRUB menu which means that it must have amended the Master Boot Record. If I try to boot my pc without the usb stick plugged in I get a GRUB error message. This is generally a minor inconvenience and a great security measure. My worry is that I am notorious for losing usb sticks. If I lose this one I wont be able to boot pc. Is there a way to remove GRUB and restore the MBR?
View 4 Replies
View Related
Aug 17, 2010
I had Kubuntu 9.04 and Windows XP on a Dual Boot. I upgraded using the update manager to 9.10. (I know, I'm a fool.) The Kubuntu install stated freezing hard on startup, just after the GRUB OS selection screen, at a blinking cursor and otherwise blank screen. I'm pretty sure 9.10 will work great from a fresh install, but the live cd freezes after main Kubuntu boot screen and even Windows live cd only shows Windows partition. fixmb, fixboot, bootcfg etc. do NOT replace the grub as desired.
View 1 Replies
View Related
Sep 30, 2010
I have windows Vista and Ubuntu 9.04 on my asus laptop and use grub as boot manager. I tried to reinstall windows vista with the recovery CD delivered with my laptop in order to just get rid of the old installations. The Installation was OK, however when rebooting windows doesn't come up printing the error could not load GRUB Error 22.
Now I think I should remove grub from teh master boot record, and the system will supposedly work.My question is is this a solution and how do I reformat the master boot record? Can I do it with the Ubuntu instalation CD?
View 6 Replies
View Related
Apr 8, 2011
I have so many entries in GRUB and have to actually scroll down so much to see windows entry. How do I remove unwanted entries in GRUB? Also How can I make a background picture appear when grub manager comes up?
View 9 Replies
View Related
Jan 15, 2010
Basically, I used a USB stick to run ubuntu 9.10 live, then tried to install to an external 500gb HDD connected with a Sharkoon Drivelink USB adaptor. The installation went fine, but I get a GRUB error 21 when booting a lot of the time. I figure this is due to the way in which the drive is connected. I am a complete noob, and I want to just ove GRUB completely and restore my Vista bootloader. Unfortunately, I do not have an installation disk as my laptop didn't come with one, and none of the others I have other PC's are the same version (home premium 32-bit).If you know of a way to fix the GRUB issue/sso I can use the external drive I would love to hear them too, but the main aim of this thread is to help me remove GRUB and restore the windows bootloader. If any more information is needed, just ask and I will provide it.HP Touchsmart TX2-1010Windows Vista Home Premium 32-bitExternal HDD:Seagate Barracuda 7200.11 SATAII (with jumper set for 150mbps)
View 2 Replies
View Related
May 28, 2010
I have two listing of windows 7 listed in Grub (I'm not sure why.) and I would like to know how to remove one if I can.
View 9 Replies
View Related
Aug 1, 2010
I have a grub menu with a ton of old kernel entries that I want to delete. I've scoured this forum, and haven't found anything that works. I've tried:
Code:"the easiest way to get rid of old kernels from grub is to uninstall the package, the post-install scripts will update grub
for example my current kernel is:
uname -a
Linux hemma 2.6.31-16-generic #53-Ubuntu SMP Tue Dec 8 04:02:15 UTC 2009 x86_64 GNU/Linux
then remove older kernels found in /boot like this:
sudo aptitude remove linux-image-2.6.31-15-generic" When I tried that, the output showed the package being removed, but nothing was removed from the grub menu. I tried running the kernel I supposedly removed, and it wouldn't start, which is promising, but how do I get it out of the grub menu? I've also tried using Synaptic, but that didn't work either.
View 8 Replies
View Related
Jan 20, 2011
Basically my laptop did have a Windows 7 partition that came with the system(which I no longer need), a Ubuntu partition and a separate partition for storage. This was until I formatted the separate partition using Windows and it did something which gave me a file system error and would not let me boot into any os. Then because I was in a rush and had lectures in a hour I installed another Ubuntu partition of 3gb just to reinstall GRUB so I could boot into my original Ubuntu to get my files. Now I would like to delete the 3gb Ubuntu partition and the Windows partition to be left with my original Ubuntu partition and then merge the hard drive into just the one partition. My main fear before I attempt this is again destroying my GRUB. I know I have made a mess of this but would really appreciate being pointed into the right direction. I have done some searching and reading but struggled to find clearish instructions on how to do it properly.
View 7 Replies
View Related
Jan 3, 2010
I'm just slightly confused here, but... what the? Why does installing grub-doc remove BOTH grub-pc, and grub-common? So basically it seems like by installing grub-doc, I have uninstalled grub totally (yes, it is still there as the bootloader, but i have no way of updating it now!) from my system. What's the conflict between grub-doc and grub-pc, such that grub-pc has to be removed?
View 5 Replies
View Related
Jan 11, 2011
Due to school, I need to remove the ubuntu partition from my hard drive because I need space I allotted to ubuntu.
I have an acer aspire one netbook.
I need to know how to remove Ubuntu and restore my hard drive without loosing my windows files (which are on a separate partition), I know i have to delete the ubuntu partition but what i am unclear of is what to do after that to restore windows as the primary boot.
View 2 Replies
View Related
Aug 31, 2010
I have Windows 7 and Ubuntu 10.04 dual-booted on my machine. grub was aautomaticlu installed as the primary loader. Soon i want to nuke my ubuntu partition but i know that will delete grub. Can i remove grub or at least make Windows boot loader default.
View 2 Replies
View Related
Apr 3, 2010
I've had to give up trying to install linux. It just won't work on my machine, a Presario 6370us that has been upgraded over the years such that it is not compatible with linux, apparently. (You can read my travails elsewhere on this board; thanks very much to all who tried to help.)
Now, how do I remove the GRUB boot loader from my system? I need the system to boot directly to Windows XP.
I can't start linux in any way, shape, or form, so I need to either edit GRUB inside the GRUB environment itself, or to do so from Windows.
Ideally, I'd like to remove GRUB entirely. Failing that, I'd like to edit the GRUB config file so that only Windows is an option. Failing that, I need to make Windows the default OS.
View 3 Replies
View Related
Jul 15, 2010
This has been bothering me for years now...when I go to remove a thumb drive from my computer, I have two options when I right click the device eject and safely remove. What on earth is the difference supposed to be?
View 3 Replies
View Related
Dec 1, 2010
I had Vista on my laptop and then started dual booting with windows.downloaded ubuntu today and installed but just not feeling it. i have looked in add remove programs but its not there. can someone point me in the right direction. How do i remove ubuntu including the grub screen and free the space up on the hard disk because i'm missing 25gb.
View 4 Replies
View Related
May 25, 2010
i installed the new ubuntu on my system as a side by side installation, i've been using it for about 2 weeks now. ported over or found linux equivalents of any applications and games i use onto my ubuntu partition, and now i've decided i want to have ubuntu use the entire drive and just delete windows! The problem is, i'm not sure if i can do that I shrank my windows partition half a gig and booted lupu (the ubuntu partitioner wasn't even showing this half a gig of free space) to see if i could just extend my linux partition (in the case that this did work, i was just planning on deleting my windows partition and just extending my linux to the full size of my drive). I really want to avoid a full reformat of the drive because i have customized my ubuntu a decent bit and i don't want to have to redo all of that (not to mention the data, but i could always back that up on an external hdd). Here is a screenie of gparted: i don't really know too much about partitioning. so is there any way to remove windows and give linux the rest of the drive without having to completely reinstall ubuntu?
View 8 Replies
View Related
Jun 28, 2011
To remove pendrive when I click the 'safely remove' tab instead of getting removed from the desktop it reappears again. This problem is there in fedora 14
View 4 Replies
View Related
Feb 5, 2010
I am helping my pal to get into Debian (yes first timer).He is running W7 on a 500G SATA HDD and he has another 250G SATA HDD that he wants Debian to go to.Will Debian install grub on the master bootloader even if the installation is going on a separate hard drive?I have dual boot before but on the same hard drive.
View 6 Replies
View Related
Feb 4, 2010
I'm trying to install ubuntu on a portable 30 gig hard drive. My BIOS does support USB booting. I've tried installing it a few times now. I clean the drive out so its all unallocated space. Then I boot from the disk and choose the second hard drive in the advanced tab.
I tried everything. It says sda for my internal drive and sdb for my external. When I choose sdb it is definitely not on the internal drive...but it won't boot.
This is the latest ubuntu I'm trying to install.
When I am finished it says USB contains no boot file or something like that and skips to windows 7.
View 3 Replies
View Related
Aug 1, 2010
I have tried to install ubuntu onto my computer using the live CD. It installed fine, and it put grub on sda (which linux sees as my SATA drive). Windows is installed on the ide drive which linux see's as the sdb drive. It was a successful install and in theory it should work, except it find the windows install first so it boots into windows without using grub. I think that linux assigns the drives using the sata first and the ide second, but windows does the opposite and the ide drive is first and the sata is second.
Is it possible to install grub onto the ide drive and get it to dual boot linux or is it possible to use the windows bootloader to recognize the linux install and chainload grub? I am thinking that if I use grub on the ide drive it will throw an error like what happened during my wubi install and it is unable to find the kernel because it is looking for it on sda, but from a windows install it is sdb. I have tried to get the computer to boot from the sata drive, but the mobo is a bit old and I do not think it is supported.
View 2 Replies
View Related
Apr 11, 2011
I've been reading and searching the forums here and most of the problems I have read about stem from writing the grub2 to the MBR of the primary drive. So i'm trying to avoid these problems if possible. Heres what I'm trying to achieve. I have two seperate hard drives in my PC, on the first is Vista Home Premium 64bit. The second drive is now completely empty and has just been reformated to NTFS with the standard 4096 setting.
I would like to install Ubuntu 10.10 and grub2 onto the second drive so that nothing is written to the primary drive at all. In a thread I read it mentioned that to do this I would need to use a "Specify Partitions Manually (Advanced)" option. My thinking is that I can just use the same process I'm using to run Ubuntu from a dvd disk to start Ubuntu once installed on the second drive. The process is an F10 "Boot Menu" when the computer is first turned on just before it starts to run Vista.
So my question is about the advanced installer options. Is there a walkthough available anywhere? (with screenshots maybe). I'm just worried that something may come up in the advanced installer that I have no knowlege of. I can re-format the second drive again from within Ubuntu running from disk if I need to (NTFS???). Also when running Ubuntu from disk I can still see the main primary drive and all its files. It would be nice to have this option but its not essential. My system. Windows Vista Home Premium 6.0.2002 SP2 Build 6002. 64 Bit, Intel Q8200 Quad core, 8GB Ram, Nvidia 9600GT 512MB
View 9 Replies
View Related
May 2, 2011
I have a laptop with a dead CD drive. I want to install Ubuntu 11.04 on it however it can not boot a USB drive. The current os is trashed, but grub is still okay. Is there any way to load the ubuntu CD's contents off of a flash drive and boot it from the grub console at boot?
View 2 Replies
View Related
Jan 15, 2011
So I wanted to get rid of ubuntu 10.10 on my HP pavilion dv6 laptop as I wanted to make some hd space. Its a dual boot with windows 7. I deleted the ubuntu partition and expanded the windows partition to fill the whole hard drive again. When I restarted my laptop I got the "error: no such partition. Grub rescue>" message.
I tried inserting my ubuntu 10.10 boot cd but whenever I boot from the cd I get the exact same grub rescue error. Is it possible to remedy this situation from the error? I am currently unable to download a windows recovery cd so I'm stuck in the grub rescue page unless its possible to fix this mess from the error prompt.
View 9 Replies
View Related
Dec 15, 2010
Anyone else seeing this? I do 'safely remove' to remove USB flash drive. disappears. Five seconds (or less) later, it reappears. The second time I do 'safely remove', it stays gone.
View 1 Replies
View Related
Jul 6, 2010
I have a system with two hard drives: an old one with XP and Ubuntu on it, and a new one on which I have done a fresh install of XP. The BIOS is set to boot off the new drive. I have now installed Ubuntu Studio 10.04(off an alternate install disc, not a live CD)onto a partition on the new drive. The installation went fine, but it appears to have written the GRUB bootloader to the old disc. The result is that when I boot up, the system boots straight into XP off the new drive, without ever seeing GRUB. I could reset the boot order in the BIOS each time I boot according to which OS I want, but that is cumbersome; also I would like to be able to remove the old drive at some point.
What is the easiest way for me to re-install GRUB to the new disc ?
View 3 Replies
View Related
Jul 21, 2010
I have a dual boot machine windows xp & Ubuntu 10.04. I want to use Grub 2 to boot an Ubuntu 8.04 32bit live cd image off my hard drive. I put a copy of the 8.04 iso in a new directory /boot/iso. I added the following lines to my grub.cfg.
menuentry "Ubuntu Live 8.04 32bit" {
loopback loop /boot/iso/ubuntu804.iso linux (loop)/casper/vmlinuz boot=casper iso-scan/filename=/boot/iso/ubuntu804.iso noeject noprompt --
initrd (loop)/casper/initrd.lz
}
[code]....
View 9 Replies
View Related
Jan 15, 2011
I am setting up ubuntu on a new(ish) HP desktop and it has been pretty painful. My issues up until now are in this thread: [URL] I marked that one as solved and am starting a new one as the initial issue for starting that thread was indeed solved. Here is where I am at now: [URL] I've found that I can just type exit, sometimes, once sometimes 10 times, and ubuntu will eventually boot. My main concern is that the grub menu only appears intermittently at boot. If I hit ESC to specify a boot device, it will show up after I pick, but if I just turn the PC on, it seems to be hit or miss. Also, as an aside, when I do get the grub menu, it is version 1.9.xxxxx. Should I be using 2?
Once in a grub menu, I follow the instructions here: [URL] and that lets me fully boot without getting the above 'gave up waiting...'error. The only problem is that this seems to only be temporary. When I reboot and get to a grub menu again, hit e to edit, it's back to what it was before....
View 9 Replies
View Related
Jun 7, 2010
I have installed 11.2 next to my 11.1 version I have a few big problems with 11.2 and I like to completely remove it. there are 2 grub's active now. I want to remove the 11.2 grub and make the 11.1 grub master again, but I do not know where to change this, the MBR points to the 11.2 grub and changing menu.lst probably does not have any effect.
View 6 Replies
View Related
