Ubuntu Installation :: How To Remove Grub So That Windows Starts Up Again
Sep 30, 2010
I have windows Vista and Ubuntu 9.04 on my asus laptop and use grub as boot manager. I tried to reinstall windows vista with the recovery CD delivered with my laptop in order to just get rid of the old installations. The Installation was OK, however when rebooting windows doesn't come up printing the error could not load GRUB Error 22.
Now I think I should remove grub from teh master boot record, and the system will supposedly work.My question is is this a solution and how do I reformat the master boot record? Can I do it with the Ubuntu instalation CD?
View 6 Replies
ADVERTISEMENT
Jan 15, 2010
Basically, I used a USB stick to run ubuntu 9.10 live, then tried to install to an external 500gb HDD connected with a Sharkoon Drivelink USB adaptor. The installation went fine, but I get a GRUB error 21 when booting a lot of the time. I figure this is due to the way in which the drive is connected. I am a complete noob, and I want to just ove GRUB completely and restore my Vista bootloader. Unfortunately, I do not have an installation disk as my laptop didn't come with one, and none of the others I have other PC's are the same version (home premium 32-bit).If you know of a way to fix the GRUB issue/sso I can use the external drive I would love to hear them too, but the main aim of this thread is to help me remove GRUB and restore the windows bootloader. If any more information is needed, just ask and I will provide it.HP Touchsmart TX2-1010Windows Vista Home Premium 32-bitExternal HDD:Seagate Barracuda 7200.11 SATAII (with jumper set for 150mbps)
View 2 Replies
View Related
May 28, 2010
I have two listing of windows 7 listed in Grub (I'm not sure why.) and I would like to know how to remove one if I can.
View 9 Replies
View Related
Aug 31, 2010
I have Windows 7 and Ubuntu 10.04 dual-booted on my machine. grub was aautomaticlu installed as the primary loader. Soon i want to nuke my ubuntu partition but i know that will delete grub. Can i remove grub or at least make Windows boot loader default.
View 2 Replies
View Related
May 2, 2011
I installed 11.04 after Windows 7. when the GRUB boot menu starts up there is an option for Win 7 boot but it will not boot windows. When that option is selected the screen changes colour for 2 seconds and then reverts to the GRUB menu. Ubuntu boots fine.I downloaded the Boot Info Script and ran it, the results are
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================[code].....
View 3 Replies
View Related
Jun 11, 2010
I just reinstalled kubuntu and after restarting( following the install) I was confronted with error 15 when grub starts.
View 3 Replies
View Related
Feb 14, 2010
I have windows XP on one disk, I added another disk and I installed UBuntu 9.10 on it. I wish to temporarily remove the ubuntu disk, however grub cannot load unless that disk is connected. It appears that grub has got to the windows disk and my system was booting from there. I wish to remove grub from all disks, (or at least the windows disk). I tried removing it from the synaptic package manager, but it's still there (but it looks different, maybe another version loaded or something). I'd like to just be able to boot from either disk using my bios boot menu.
View 6 Replies
View Related
Apr 19, 2011
I recentely installed ubuntu to my second hard disk (on the first i had windows 7 and data), but the hard disk that i installed ubuntu on broke, so i had to trash it. The problem is that i have an external disk reader that is only bootable after i booted at least once into windows. So basically i can't boot using either Windows or Linux disks, nor can i boot into the os itself. When i start the computer i get something like device not fount and a long code, then a prompt shows up (Rescue GRUB). What do i need to type here to remove grub and be able to boot into windows?
View 1 Replies
View Related
Aug 15, 2011
Sup Ubuntu forums, before I begin I would like to say that I do indeed thoroughly enjoy Linux, especially Ubuntu. and I do intend on coming back to it later on down the road.
Okay, so what I want to do is completely remove Ubuntu and the Grub Bootloader and install the Windows Bootloader but I am not so sure how to accomplish said task. I bought my laptop with Ubuntu 10.04 installed on it and have since then updated to 11.04. I don't believe windows was previously installed on the laptop but I could be wrong.
I have a Ubuntu 11.04 Live CD, a Windows 7 Ultimate Installation CD, and a Windows 7 Recovery CD.
I have heard that you can remove all the necessary partitions that have Ubuntu/Grub in them through the Ubuntu Installation process but I am not sure which partitions to remove.
View 4 Replies
View Related
Oct 31, 2010
Is there any way to simply remove grub? Does GRUB reside in a specific partition? Do I have to just delete the partition that has GRUB on it?The way my bootable partitions work is something like this.
1)Installed Vista
2)Installed Ubuntu
3)Thought I removed GRUB
4)Put in new HDD(1) and installed Win7 onto it
5)Put in another new HDD(2) and put another Win7 onto that (but I disconnected every other HDD so that the bootloader would be written onto the new HDD(2). When I have all my HDD's plugged in now, I get a GRUB load error (I think it's 21).
View 4 Replies
View Related
Sep 20, 2010
I installed ubuntu on my lappy but due to battery life reasons and driver issues I cannot use it; must return to windows . I do not want GRUB on it but I'm stuck with it now. how do I wind the clock back?
View 1 Replies
View Related
Mar 26, 2010
I am using Lenovo Laptop. Initially I had Dual boot with Windows Vista and RHEL 5. I deleted Vista Partition. If I try to install Vista using Vista Bootable DVD, The Vista Bootable DVD is not getting detected! Now I want to remove everything (RHEL 5 & Grub Boot loader) from my laptop and install fresh OS.
View 14 Replies
View Related
Jun 29, 2010
I installed opensuse 11.2 today on my external hard drive and everything is running great, but I want to see if I can make a modification to the way my computer boots. I share this computer with others and they are not going to be happy to have to wait for the boot menu to start when they turn on the computer in order to choose which OS to run (Especially since if they do not make a choice it auto runs opensuse after a few seconds).
What I would like is if opensuse can be "out of sight, out of mind" and only load when I put in the live cd and then choose to boot from my external...... is it possible to do this?I am not a computer wizard and do not work in the industry.
View 9 Replies
View Related
Oct 24, 2010
I just made my system unbootable... Here is what i did.. I have two sata HDDs
160 GB (Contained Windows 7)
500 GB
I copied entire 160 gb as an mirrored image to 500GB HDD using Acronis Disk Director. I deleted entire 160 GB HDD.. Removed the 500 GB HDD and kept it seperate.. Installed ClearOS Enterprise 5.2 Worked a little bit... The i wanted to delete ClearOS.. So i connected 500GB HDD and booted again in Acronis Disk director Formated the entire 160GB HDD.. Copied back the entire 160 from 500GB HDD.. Now my sytem refuses to boot... Just 4 letters "GRUB" appears on the screen... I tried booting using XP CD.. It gives a blue screen.. I tried Windows 7 CD.. It says unable to fix due to MBR problem..
View 8 Replies
View Related
Dec 1, 2010
Code:
grub-install -v
grub-install (GNU GRUB 0.97)
I loaded GRUB, and now when I reboot it goes straight into the 'grub>' command line. Initially GRUB had the root as (hd0,2), whereas the boot is on (hd0,1)...(hd0,2) is my '/home' partition, and (hd0,1) is my '/' partition... So on a bootup I ran...
Code:
root (hd0,1)
setup (hd0)
Now when I boot I still get the 'grub>' command line, but now the root is correct.
From 'grub>' I can type...
Code:
grub> configfile /boot/grub/menu.lst
GRUB will then show the menu, and I can click the listings to load them. All's fine, but why doesn't GRUB just load the menu.lst without my prompting? How can I automate this process of typing 'configfile /boot/grub/menu.lst' each time I boot?
View 1 Replies
View Related
Apr 22, 2010
installed windows 7..then tried restoring grub using live cd....mounted partition somewhere else....then installed ubuntu again where it was installed previously and now grub is not detecting windows 7 but i am able use my windows files
used sudo update-grub2.
View 9 Replies
View Related
Jan 19, 2010
I have installed Kubuntu on a usb stick. I installed version 9.04 from a disk that came with linux magazine. After installation I can only boot pc if the usb stick is plugged into pc before I turn it on. I then gat a menu with 5 options. The first is Kubuntu and the last is Windows XP. If I try to boot my pc without the usb stick plugged in I get a GRUB error message.
I think this is the GRUB menu which means that it must have amended the Master Boot Record. If I try to boot my pc without the usb stick plugged in I get a GRUB error message. This is generally a minor inconvenience and a great security measure. My worry is that I am notorious for losing usb sticks. If I lose this one I wont be able to boot pc. Is there a way to remove GRUB and restore the MBR?
View 4 Replies
View Related
May 24, 2010
I do not know what to do, i cannot load windows partition. it just loads grub again. this must have been something that happened when i upgraded to the 10.04 or w/e. can someoen help me out with what i can do to stop this or fix it. maybe i can reinstall but i want to know what will work first, i do not have a lot of time to fool with my computer like this again. i spent a week getting ubuntu on my computer the first time so i do not ever want to spend that much time again especially in finals week. !
View 1 Replies
View Related
Jan 21, 2010
I was trying to load up Ubuntu 9.10 on a thumb drive to load look at the files on a computer with a dead disk drive, I couldn�t boot up on the other computer, but that�s another story (yes the drive was marked as bootable)
When I restart my laptop whose diskdrive I used to install Ubuntu onto the USB drive, I get a GRUB error �No such device and can load anything unless I plug back in the USB drive. When it is plugged in, the USB boot is the primary (1st in the list) boot. I tried editing the .lst file on my laptop�s drive but it only has its kernels listed. Anyone know how to make my system quit looking for a USB mounted kernel? Or at least not fail if it can't find one.
View 9 Replies
View Related
Aug 17, 2010
I had Kubuntu 9.04 and Windows XP on a Dual Boot. I upgraded using the update manager to 9.10. (I know, I'm a fool.) The Kubuntu install stated freezing hard on startup, just after the GRUB OS selection screen, at a blinking cursor and otherwise blank screen. I'm pretty sure 9.10 will work great from a fresh install, but the live cd freezes after main Kubuntu boot screen and even Windows live cd only shows Windows partition. fixmb, fixboot, bootcfg etc. do NOT replace the grub as desired.
View 1 Replies
View Related
Apr 8, 2011
I have so many entries in GRUB and have to actually scroll down so much to see windows entry. How do I remove unwanted entries in GRUB? Also How can I make a background picture appear when grub manager comes up?
View 9 Replies
View Related
Mar 22, 2011
Working with Red Hat Enterprise Linux ES release 4 (Nahant Update 4). Working at a new company, and the previous guy had created a shell script to take care of a specific task. His role was unique as the manager took advantage of his programming ability (wasn't a part of his job). On top of that, I'm no programmer either. I'm trying to figure out what this script is doing because it's throwing a warning.
REM this is remove /home/public/ccnf* (remove anything that starts with ccnf) rm /home/public/ccnf*
I understand that this retrieves anything that starts with ccnf that has been changed at any given time, but I don't understand anything else after -ctime...
find /usr/CC/DATA1/RPT/ -name "ccnf*" -ctime -1 -print | xargs fgrep -l "GB-1 " > /tmp/t.file
REM while read line = read each line that is "printed" from the above command? while read line do
REM copy each line that was read from above command to /home/public/ cp -p $line /home/public/
REM don't know about this one =( done < /tmp/t.file
REM remove /tmp/t.file that was made by previous command? rm /tmp/t.file
View 2 Replies
View Related
Aug 1, 2010
I have a grub menu with a ton of old kernel entries that I want to delete. I've scoured this forum, and haven't found anything that works. I've tried:
Code:"the easiest way to get rid of old kernels from grub is to uninstall the package, the post-install scripts will update grub
for example my current kernel is:
uname -a
Linux hemma 2.6.31-16-generic #53-Ubuntu SMP Tue Dec 8 04:02:15 UTC 2009 x86_64 GNU/Linux
then remove older kernels found in /boot like this:
sudo aptitude remove linux-image-2.6.31-15-generic" When I tried that, the output showed the package being removed, but nothing was removed from the grub menu. I tried running the kernel I supposedly removed, and it wouldn't start, which is promising, but how do I get it out of the grub menu? I've also tried using Synaptic, but that didn't work either.
View 8 Replies
View Related
Jan 20, 2011
Basically my laptop did have a Windows 7 partition that came with the system(which I no longer need), a Ubuntu partition and a separate partition for storage. This was until I formatted the separate partition using Windows and it did something which gave me a file system error and would not let me boot into any os. Then because I was in a rush and had lectures in a hour I installed another Ubuntu partition of 3gb just to reinstall GRUB so I could boot into my original Ubuntu to get my files. Now I would like to delete the 3gb Ubuntu partition and the Windows partition to be left with my original Ubuntu partition and then merge the hard drive into just the one partition. My main fear before I attempt this is again destroying my GRUB. I know I have made a mess of this but would really appreciate being pointed into the right direction. I have done some searching and reading but struggled to find clearish instructions on how to do it properly.
View 7 Replies
View Related
Jan 3, 2010
I'm just slightly confused here, but... what the? Why does installing grub-doc remove BOTH grub-pc, and grub-common? So basically it seems like by installing grub-doc, I have uninstalled grub totally (yes, it is still there as the bootloader, but i have no way of updating it now!) from my system. What's the conflict between grub-doc and grub-pc, such that grub-pc has to be removed?
View 5 Replies
View Related
Oct 7, 2010
I am actually facing a vague problem here. I was previously running Windows XP and Ubuntu . Ubuntu was installed Windows XP The problem is
1. First I tried to do some disk partitioning. That ended up with some error.
2. Ignoring that, I went to install Windows 7 over Windows XP but I was not able to proceed with Windows 7 , because the partitions were corrupted.
3. So I used Ubuntu LIVE CD (Grub was lost at this point )and used 'testdisk' and recovered the partitions.
4. Now installed the Windows 7 successfully.
5. Now again I moved to Ubuntu Live CD to write the GRUB. After which I tried restarting
6. Now Ubuntu is booting perfectly as before. But the problem is with Windows
7. The GRUB loader instead of showing Windows 7, it shows Windows XP !!! . and there is no other entry for windows. When I tried opening it, it says "error, cant read file" and further inout moves back to the grub loader list again.
"How do I change the entry to Windows 7 from Windows XP and boot Windows7 successfully " I tried it a couple of times, same thing happens . So how to change the entry?
View 6 Replies
View Related
May 7, 2010
I had 9.10 installed and I did an upgrade to 10.04. However I cannot see anymore my Windows Vista partition with grub.. I have a Toshiba laptop Satellite p305.This is my boot script output:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in [code].......
View 3 Replies
View Related
Mar 5, 2011
how to be able to add windows 7 to my grub menu or to even be able to boot to windows 7. I am currently unable to do it and my system just automatically goes straight to ubuntu. I've tried holding down SHIFT during startup and all that appears in my list is ubuntu entries and a memtest entry. My windows 7 files are still intact because I can see the drive through ubuntu and see all my files. I am trying to have Windows 7 on one hard disk that is 640GB and ubuntu on a second hard disk that is 160GB
[Code]...
View 9 Replies
View Related
Aug 5, 2011
Ive been running windows 7/Ubuntu dualboot for some years now and never had any problems.Some months ago I got a new Patriot Inferno ssd. Ofc the first thing I did was to installl windows 7, it had no problems, ran fast and smooth. Then when I reinstalled grub I started to get error when trying to start windows, the logo never apeared and all I got was the message "Windows failed to start. A recent hardware or software"Status: 0x00.00F" "Info: The boot selection failed because a required device was inaccessible.". It does not matter what order I install windows and ubuntu in, or how many times Ive tried to reinstall grub. Windows 7 will not work while I have grub/windows installed. Right now Ive got them installed on separate drives, ubuntu on the ssd and windows on a partition on a 1tb hdd. Unfortunately I need to have windows for .net programing and gaming..
[Code]...
View 1 Replies
View Related
Mar 9, 2010
is it possible to use a Windows-based recovery partition on a dual-boot computer to overwrite the Ubuntu partition and remove the GRUB loader? For instance, if you booted up your computer, accessed the hidden recovery partition and used it to reset the computer to it's factory default settings, would that effectively remove the Ubuntu partition and the GRUB loader? Would a completely new installation of Windows overwrite/uninstall Ubuntu and GRUB automatically?
View 4 Replies
View Related
