Ubuntu Installation :: Possible To Replace Mobo / Chip Or RAM Without Reinstall?
Jul 28, 2011
I have 10.04 LTS installed onto an SSD and have a spinning disk for crud, and my brother wants to give me his old GA-PH67A-UD3 and 8GB of RAM if I buy an i7 2600 to put in it. The thing is, I'm happy with my GA-965P-DS3 with Q6600, so I don't actually need an upgrade. So, can I get away with replacing the mobo, chip, and RAM and putting the SSD in the equivalent SATA port on the new mobo (/dev/sda), and will it cope? Will the kernel detect a new board and chip and carry on accordingly? I'll have to remount my crud drive to the same mount point it expects, and if my user account as the same UID as the old system, I'm hoping that might cope, too. Of course, I might be suggesting complete evil, and if this was Windows, I wouldn't even dare think about it, but I have a sneaking suspicion that Linux might cope with this kind of change where Windows would fall over in a heap.
View 6 Replies
ADVERTISEMENT
Jan 27, 2010
My office has a box which is, by necessity, dual-boot WinXP/Slack. The Slackware I'm running there is -current, all great and fine. Until now... It turned out that my mobo, an ASUS P5KPL-CM, died after a power surge. Since the XP needs software activation, we replaced it for an exact copy of the mobo. After the change the box worked fine in XP, and I was able to connect to the network via the Ethernet interface. BTW, the Slackware version is Slackware-current, updated as of the Jan 9 update (after that I was no longer able to connect to the Net with Slack). However, in Slackware there was a problem: eth0 was no longer recognized. Using /sbin/ifconfig only listed the lo (loopback) interface. The lspci output is:
Code:
01:00.0 Ethernet controller: Attansic Technology Corp. Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller (rev b0)
Subsystem: ASUSTeK Computer Inc. P5KPL-CM Motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
[code]....
View 5 Replies
View Related
Jun 14, 2011
I have suse 11.4 installed and I wish to replace the on-board sound chip with an add-on sound card. The following are available at my local shop but they cannot advise whether any will work on Linux Suse 11.4.
Anyone know which of these cards will work on Suse 11.4?
Sound Blaster X-Fi Titanium HD
Sound Blaster X-Fi Xtreme Audio
Asus Xonar DS
View 9 Replies
View Related
May 2, 2010
So I was messing around trying to uninstall Nibbles and reinstall since I have an issue starting that game and something happened and removed the submenu under Games called "Logic", which had another whole list of games.
Is it possible to reinstall the games package or reinstall the update?I'm thinking more of the lines of a system restore or something so back 2 days from today.
View 2 Replies
View Related
Aug 1, 2010
explain the following issue I have with Debian IA 64:I tried on a PC (Mobo Gigabyte G41M-ES2H, core 2 duo, 4 GB RAM DDR2) the live CD of Debian Lenny IA64 and everything worked just fine, which was a very good thing because none of all other major ia64/i386 distros of Linux (Mandrake, ubuntu, fedora) did so. In a nutshell it seems that the IGP G41 chipset is the cause of these setup failure (Everything is OK when using a PCI-e graphic card that I need in another computer)rd as someone (viewtopic.php?=17&t=49186&p=282839&hilit=G41M+ES2H#p282839) successfully installed Lenny on a very similar mobo. To go to the point what I do not understand is when I launch the iso Cd to now install the same version of Debian, everything freezes at the very beginning of the boot and the screen goes blank.
View 4 Replies
View Related
Oct 20, 2010
I just purchased a new PC with the following specs:
Intel Core i5-760
ASUS P5P55D-E LX (S1156 mobo)
Sapphire HD 5750 Vapor-X 1GB Video Card
Samsung 1TB HDD
Corsair DDR3 PC1333 Gaming RAM - 2x2GB
DVD: Samsung DVD burner (internal)
I have made several trials to install Lucid Lynx but all failed:
1. Installed Windows 7 64-bit, hdd formatted as NTFS and ext3, then trying to install Lucid Lynx 32-bit : failed.
2. Installed Windows XP 32-bit, hdd formatted as FAT32, then trying to install Lucid Lynx 32-bit : failed.
3. Trying to install Lucid Lynx 32-bit with a clean hdd formatted as FAT32: failed.
In all the scenarios above, I have tried using Ubuntu installers on CD, DVD, or USB. on CD and DVD, the process always stopped after the Ubuntu logo screen, not even reached the langauage selection screen. On USB, with Legacy set to On in the BIOS, it did run and started by the option screen where we get to choose booting from the usb, or booting from hdd, or memory test, etc., but after choosing the booting from usb (and then hdd also) option, the process also stopped after the Ubuntu logo screen. I have experience dual booting Windows XP with Lucid Lynx on an older system, so I'm not completely new in this. I'd like to know what actually went wrong?
View 2 Replies
View Related
Sep 27, 2015
I am a real debian noob. I may be too old for this (things have changed a bit since I first started hacking fortran in 1971), but will try one more time.I am editing this original post to clarify: my debian install will not boot to GUI. It will boot to a shell under the advanced option.I have tried loading debian 8.1.0 from DVD. The system will install, but will not boot after the install.On a regular reboot, the last command is fsck. Then it hangs.
On a recovery mode reboot, the last output is:[7.940682] FAT-fs (sdal) utf8 is not a recommended IO charset for FAT files (my handwriting is bad - may not be 100%). - then it will hang.The problem may well be the result of UEFI and the m5a97 R2.0 mobo I am using with my amd 8230E processor. I've been doing some research on UEFI and archlinux. It is a bit of a challenge for me.
I've managed to load ubuntu on this drive. I burned a debian 8.2.0 live DVD, but it will hang also. debian live will hang before it gets to a GUI. The debian live will run the GUI desktop environment with the amd64 fail safe option. When I install debian from the live DVD (the 1.4gb DVD, vs the regular 4.0 gb DVD), it will hang before it gets to the GUI.
View 14 Replies
View Related
Mar 21, 2010
Somehow Fedora 12 does not find one of my Sata drives (Seagate Barracuda 500GB) on the motherboard (Asus P5Q pro). The drive is attached to SATA_E1, which is a Silicon Image Serial ATA RAID connector. The drive currently has Windows Vista 64-bit OS which has been working fine. Fedora install loads correctly without errors, but only shows my RAID system on SATA ports 1-6.
WHAT I HAVE TRIED:
I have tried showing RAID as IDE in the BIOS, and setting it to compatible mode. Still does not detect.
I have tried setting the drives to ACPI mode in BIOS. No effect.
OTHER INFO:
I'm installing the x86_64 version of Fedora 12. I have run the Debian i686 installer and it picks up this volume without issue.
View 6 Replies
View Related
Apr 23, 2010
I'm trying to get 9.10 to work nicely on a Thinkpad Edge 14".Everything is working fine, except that I have issues with the intel graphics drivers.The monitor's native resolution is 1366x768 and I have Intel HD graphics card on it.I have changed my xorg.conf to use driver = "vesa", but now I get only a resolution of 1024x768.I tried to use xrandr to fix this, by adding a new mode etcetera, but this does not work - I believe because the driver is the issue.Also, doing Ctrl+Alt+F[1-6] gives me a blank screen rather than a console.
How do I find out the details about my graphics chip? Intel Corporation Arrandale Integrated Graphics Controller (rev 12)Maybe I should go more bleeding edge for my drivers? How do I do that?
View 4 Replies
View Related
Mar 19, 2010
Has anyone tried to install Karmic on a laptop that has HP's new Linux on a chip OS installed? I think it's a scaled down Splashtop desktop and at least a portion of the OS is hardware based. I sure wonder what would happen if/when I try to install grub and Ubuntu.
View 7 Replies
View Related
Mar 31, 2010
When trying to install fedora, I frequently run into the problem where it locks up on boot.
The line that I am able to read right before it locks up is: "No TPM chip found, activating TPM-bypass!"
I was wondering if anyone has any similar problems or how I could fix this.
View 9 Replies
View Related
Oct 13, 2010
I asked around about in the now closed thread: [url]
For about half a year ago, is not present in 10.10. That is I can now use the Dell U2711 monitor at its full resolution, using a Radeon HD 4550 (RV710) card, with acceleration and without the image beeing distorted, using the open xorg radeon driver.
View 4 Replies
View Related
May 26, 2010
I'm having no end of problems trying to get 10.04 onto my older Toshiba Satellite A50 laptop that I use as a spare laptop round the house. The laptop previously dual booted with XP and Xubuntu fine. I wanted to give Lubuntu a go to see if it's performance was better on this older hardware. When installing I got the black screen of death, and also got the same problem with the Xubuntu CD. Research pointed me in the way of this article: [URL] I was able to boot the Lubuntu Live CD using the instructions outlined in method A.
Once installed however I rebooted and Grub seemed to be knackered. Just sent me to a recovery console of which I had no idea what to do. As I could no longer boot into Windows either I reinstalled Xubuntu 9.10 and all was fine. I decided yesterday to give it another bash this time connecting to my wireless from the live cd hoping it would download an update to fix this problem. Nadda, Grub this time did show and I was able to boot into XP, but upon picking my Linux distro I now get an unrecognised device error with a long string of charachters and then it dumps be back into the grub menu, choosing the recovery mode version does the same thing.
View 6 Replies
View Related
May 11, 2015
If you have a Radeon graphics chip and upgrade to Jessie, install firmware-linux-nonfree, before rebooting.
My dist-upgrade to Jessie seemed flawless until I rebooted and couldn't get into X.
Seems Jessie boots into Gnome by default, but Gnome now requires 3-D acceleration. For my Radeon graphics chip (ATI Radeon 3100), this requires firmware-linux-nonfree, which I didn't need before and was not installed as part of the upgrade.
A boot message alerted me to this need.
I was able to get X going with xinit. I used FVWM; for XFCE I believe the command is:
xinit /usr/bin/xfce4-session -- :1
and from there I installed the package firmware-linux-nonfree.
View 2 Replies
View Related
Feb 4, 2011
how do I retrieve/reinstall Grub without having to reinstall Ubuntu?
View 1 Replies
View Related
Apr 23, 2011
Can the Replace function replace more than one word with the same character(s)?
Also, do you know how to access the plugins provided by the gedit-plugins package?
View 3 Replies
View Related
Mar 26, 2010
I'm about to add pci ethernet card. Currently the mobo nic is eth0. When I add the new card will it by definition be eth1 (or will it become eth0 and the mobo nic become eth1)? The broader question is: how are the "eth's" numbered at boot time? If I were to add a 2nd pci nic, could I predict which would be eth1 and which would be eth2 (based on pci slot number??)? Is there somewhere to readup on this to get a broader understanding?
View 1 Replies
View Related
Jul 21, 2010
I have an old system, and want to upgrade the MOBO and processor. I am running Ubuntu 10.04 32bit...If I upgrade the MOBO and CPU to a 64 bit system....what will happen?
View 9 Replies
View Related
Apr 29, 2010
I recently installed opensuse 11.2 on my laptop which also had windows vista and windows 7, i created a new partition and the installation went smoothly, after i went to boot back into windows 7 i got a blue screen of death, strangely vista boots perfectly.I could just reinstall windows 7 but its a pain to reinstall all my programs and such
View 6 Replies
View Related
May 6, 2010
I am trying to output all of my sound through the s/pdif output on my motherboard. It works fine in Windows 7, I just had to go under the sound properties and switch from the analog to the s/pdif. When I try to do the same in Ubuntu, theres nothing listed. Only "internal audio analog stereo" and "HDMI Audio" (from my graphics card) display under the output choices in Sound Preferences. Under hardware only the HDMI and Internal Analog show up as well. I tried looking at the Gnome-Alsa mixer but nothing in there either.
View 2 Replies
View Related
May 3, 2011
I currently have opensuse 11.3 installed on a pc. I am thinking of upgrading the motherboard and cpu. If i do this, can i just power it back on and everything is back to normal?
View 4 Replies
View Related
Mar 13, 2011
I have vista and ubuntu 10.04 LTS loaded on my disk. i upgraded to ubuntu 10.04 LTS from the earlier version, after that i started using MTS Mblaze usb broadband stick as wired connections were not available. In order to get my usb stick working i messed up the ubuntu settings and now even wired connections are not working. i am frustrated and would like to replace it with 10.10 as it has MTS Mblaze default settings. In any case i never like the look and feel of 10.04 as compared to earlier versions. I have made the bootable CD for 10.10, but now how do i go about installation so as to replace 10.04. I do not want to disturb my vista as there is lot of crucial data.
View 8 Replies
View Related
Feb 12, 2010
On motherboard and GPU selection. I'm planning on an i5 on a Gigabyte P55 AUD4 board (think that's the numbers). I was thinking about an NVidia graphics card but the ATI 5775 has also been suggested. I'd thought NVidia was better for Linux but someone said this wasn't the case unless you were talking 3D. (I'll be dual booting windows, so windows 3D performance is relevant for midrange gaming) Can you advise on a good choice of graphics card that will be compatible with SUSE, +quiet, low-mid price bracket. ($150-200 Australian, about $100-$130 USD I guess.)
View 3 Replies
View Related
Jan 25, 2011
I would like to know as to how to save a boot order sequence...In my desktop PC I have a gigabyte MOBO housing Pentium Dual Core processor...
Whenever I have to boot from an external USB , I have to press del at boot , go into CMOS features and change the Order of Booting 1-DVD 2 USB-FDD 3. USB-HDD 4. Local Hard Disk
The problem is that everytime I have to repeat the above to boot from USB...I am also confused between USB - HDD and USB - FDD...Some utils partition and use the USB like a HDD while it is not the case with FDD I guess
How do you freeze the boot order so that on inserting any USB / External HDD at boot , the system should give it the priority over local hard disk..
Also in Giga MOBO I noticed that there is no "generic USB" mentioned in BIOS...It lists the USB device by name say "Kingston Data Traveler " "Sandisk Micro" etc ....
What should I do to make the boot order permanent?
View 5 Replies
View Related
Jul 23, 2011
This is partly a note to myself for the future and a guide to anyone who experiences similar issues.
So, I had to reinstall Windows XP since my previous installation gave me a blue screen error due to reasons unfathomable. Naturally, this deleted the GNU Grub and I could not login to my Fedora.
I read that apparently booting from a DVD installation offers an option to enter the rescue mode. I did not have a DVD, I only had the LiveCD so I had to figure out a way to reinstall Grub from the LiveCD. The following method seemed to do the trick.
Run the LiveCD and open Terminal.
1. Find the partition where the Grub Stage1 is code...
View 1 Replies
View Related
Jan 11, 2010
I have ububtu install via wubi. i want to change the install and TOTALLY replace it still using wubi. Is there anything special i have to do so that i don't end up with 2 wubi installs or 3 options on my boot list?
View 2 Replies
View Related
May 20, 2010
Posting this thread using the DEMO variant of 10.04, congrats to the developers that it didn't fail like that of 9.10 for all those who have configured their Modems & Routers to work in 'Bridge Mode'!
Here's my concern:::
I wish to immediately replace my 12GB partition, currently kept aside for 9.04 with 10.04.How to accomplish the same? Installation screen does comes up with 'Manual' preference, but it is confusing & am unable to make any decision owing to great excitement!?
View 6 Replies
View Related
Feb 3, 2011
i ve installed fedora 14 a few days ago, but i m not at all happy with it. i also have on the same disk, a windows xp partition, and another disk with data. i am a newbie, so i wanna know if there is a guide, or tutorial, or some guidelines if possible, on how to replace fedora with ubuntu 10.10. i ve tried to initiate the installation, but i only got the options to use free space, or erase entire disk. well, to be honest, there is a third option, prompting me to manually decide the partitions, but i know nothing about it.
View 2 Replies
View Related
Mar 11, 2011
I wanna install GRUB-1.98 in my UBUNTU9.10, you know 9.10 comes included with GRUB 1.97 beta... but I wanna do a grub-mkpasswd-pbkdf2 and I can't. Due it I want to install GRUB 1.98. Well, the case is I already installed GRUB1.98 and I could do grub-mkpasswd-pbkdf2 but it doesn't work. Cuz when I'm gonna enter WITH "E" just appear a screen when I can write but my login user and my pass doesnt appear..!
View 3 Replies
View Related
Dec 6, 2010
i have ubuntu 10.04 64 bit installed and configured and working sweet. I have reinstalled windows 7 and now i can't boot ubuntu i've tried easybcd to add ubuntu to win boot loader which failed and tried to follow the instructions to reinstall grub through a live cd which i am in at the moment. i go to a terminal and type sudo grub and it brings up the grub prompt. i have mounted all discs and entered the command find /boot/grub/stage1 and it keeps spitting this back at me Error 15: File not found
my hd is a 80gb with partions like this
/dev/sda1 105mb ntfs system reserved
/dev/sda2 45gb ntfs win 7 home premium 64 bit
/dev/sda3 34gb ext4 ubuntu 10.04 64 bit
/dev/sda4 1.5gb linux swap
View 9 Replies
View Related
