When I turn on my desktop and log in to Lucid Lynx, I can only use it with "Failsafe GNOME" turned on. If the Normal GNOME is on instead, it literally freezes every single time, within about 4secs-1 minute of use. is there a way I can boot up in failsafe GNOME without clicking it every time?
View 4 Replieslast week I did an update and it may or may not be tied to the fact that now I can only login to Failsafe Gnome mode. I'm running Ubuntu 9.10 - Karmic Koala. I've had Ubuntu for a year but I'm not that familiar with it.
View 1 Replies View Relatedmy when i boot my ubuntu 8.10 i get only xterm failsafe ,however failsafe Gnome does open , i have tried several solutions from the web such as deleting .profile file and some other solutions but none works.here's my .xsession-errors file
Code:
/etc/gdm/Xsessin: beginning session setup...
/etc/gdm/Xsession: Executing default failed ,will try to run x-terminal-emulator
Older machine here that I upgraded to 10.04 after a clean install of 9.10 some months ago. When booting into GNOME, the desktop image flashes on the screen and the second the bars on top and bottom try to appear the system boots out of the desktop and returns to the log on screen. I assume this is a crash of Xserver, but just guessing. Per another page I ran: lspci | grep VGAand returned:
01:00.0 VGA compatible controller: VIA Technologies, Inc. KM400/KN400/P4M800 [S3 UniChrome] (rev 01)
I know - old machine Typing this from failsafe mode, would be great to hear from someone as to what I can do to get this working in normal mode again.
After using my computer a few days ago, I tried to turn it on again yesterday, and I was unable to boot. After some Googling (on my mobile) and a few Grub bash commands, I was able to boot, but now I cannot log in. Neither normal Gnome nor XTerm work, and Failsafe is all that I can log into. Above that, every time I log in, I get the following message:
Quote: Error activating XKB configuration. It can happen under various circumstances:
- a bug in libxklavier library
- a bug in X server (xkbcomp, xmodmap utilities)
- X server with incompatible libxkbfile implementation
X server version data: The X.Org Foundation 10604000
If you report this situation as a bug, please include:
- The result of xprop -root | grep XKB
- The result of gconftool-2 -R /desktop/gnome/peripherals/keyboard/kbd
[Code]....
This happen on a samsung NC10 (graphic chip: Intel 945GME). When I boot linux + gnome3 and no external screen is attached to my laptop, then, gnome 3 boots with the gnome shell (gnome 3 shell). If, at this stage (when logged in), I plug an external monitor to the laptop (and configure it using the monitor config tool), then I can run gnome 3 shell on my external monitor as well... BUT:
If I log in when the external screen is already plugged in, then gnome boots in fallback mode... with other words: Gnome3 seems to be able to run the graphic+screen with gnome 3, but the "fallback" detection seems not to beleive so...
Recently I changes settings on Ubuntu Desktop and I choose gnome failsafe login, hence everything loads nice except when the user accounts is load it only appears the background and the terminal. Is there anyway to have the desktop back the way it was with the complete gui interface?
View 1 Replies View Relatedwhen i called up the login screen to change to automatic login, i apparently changed my preference from GNOME to Failsafe GNOME (knew i made an extra click but didn't know where, dumb, i know). with Failsafe the network manager applet and all the other default prefs disappeared. the worst is that i can't connect to wireless without the nm.
these are preferences, right? you should be able to go right back anytime and change them but now when i go settings > admin > login the window is locked. only the unlock button is lit up and that won't budge. so as the thread title says, how do i unlock login preference window and/or disable Failsafe Gnome?
I just did a distribution upgrade on my laptop from 9.1 to 10.04, and it went fine for the most part except this issue. After it boots up, I don't see any window titles/scrollbars/borders and on clicking the icon for "Show desktop" on the bottom left, I see the following error message:
"Your window manager does not support the show desktop button, or you are not running a window manager."
After googling a bit, I realized that gnome-wm is not starting automatically and so I have to manually start each time to see the windows working properly. Can somebody tell me if there is a way to make sure that gnome-wm starts automatically? I know I can put it in my .bashrc but I want to do it the correct way if possible. If not, I will have to go with that workaround.
Last week I successfully installed Ubuntu/Gnome onto a 3 year old Toshiba Vista laptop which worked mostly brilliantly. Today I am trying to install it onto a 4 year old Toshiba XP laptop, but am having problems.
Laptop specs: Intel 1.50GHz 488MB RAM 60GB HDD, partitioned by Ubuntu on install into 30GB/30GB, both partitions over 75% free space The laptop, though old, still functions in XP, and the main reason we're switching it to Linux is that it has issues managing wireless, plus it's fun to do so - learning experience and all. The other laptop has better specs - multiply everything by 2 but Windows was much less reliable as, after all, it is Vista, and switching to Linux there was a necessity.
The Ubuntu is 10.10 and it's the same live cd I used to install it onto the other laptop. It's installed alongside Windows XP and the install proceeded without issue. However when booting in normal mode it becomes unresponsive very quickly - sometimes as soon as the five pips on the loading screen become orange, the last time it lasted a whole 2 minutes before becoming unresponsive.
In failsafe graphics boot it runs without issue. The update manager tells me it's up to date, and I have installed Wine through SPM while typing this. It's behaving as I'd expect it to, with tiny lags on scrolling sometimes (perhaps related to being in failsafe graphics).
Is there some setting (graphics?) I should change to allow it to cope in normal mode? I'm aware 488MB RAM is slightly under the recommended amount, but it evidently can cope in failsafe so would appear to be enough to function?
I've installed on my workstation the opensuse 11.2! After the reboot when I enter the username/password, nothing occurs... On the other hand, it's running well with the failsave, why??
Code:
title openSUSE 11.2 - 2.6.31.5-0.1
root (hd0,1)
kernel /boot/vmlinuz-2.6-etc... root=/dev/disk/by-id/ata-etc...
resume=/dev/disk/by-id/ata-etc....
splash=silent quiet showopts vga=0x317
initrd /boot/initrd-2.6.31.5-0.1-default
[Code]...
When I click the window with the left mouse button my window gets dragged, instead that the GUI elements are getting selected.
For example: Opening Firefox and selecting the address field doesn't activate the field to write in. Clicking buttons is impossible. Any action in the window seems like blocked. I'm working this around by holding Shift + Left mouse button; then it's possible to activate the GUI element. Observation: This happened just today when I switched on my computer and seems to affect only me as my user! Logging in as another user doesn't bring up this error. Everything works as usual as possible. The Gnome Panel is not affected. Closing, minimizing/maximizing windows is possible. Clicking anywhere on the window with the right mouse button opens the window options menu, not the expected options. Hovering over a button seems to be recognized as it changes its properties, but clicking still drags the window. Restarting X and restarting Ubuntu doesn't change anything.
[Code]...
I just did a distribution upgrade on my laptop from 9.1 to 10.04, and it went fine for the most part except this issue. After it boots up, I don't see any window titles/scrollbars/borders and on clicking the icon for "Show desktop" on the bottom left I see the following error message: "Your window manager does not support the show desktop button, or you are not running a window manager."
After googling a bit, I realized that gnome-wm is not starting automatically and so I have to manually start each time to see the windows working properly. Can somebody tell me if there is a way to make sure that gnome-wm starts automatically? I know I can put it in my .bashrc but I want to do it the correct way if possible. If not, I will have to go with that workaround
This started a few days ago and I checked back through recently installed packages and nothing looks related. If I boot into ubuntu normally, plymouth looks a mess, but then things boot fine but while the mouse is showing and ubuntu goes about with connecting to networks and so on, but it doesn't register the and input from the mouse or keyboard. It will sleep if you press the power button, but its no more responsive after waking up.
If I boot into recovery mode, and use the failsafe graphics option then everything runs fine. Apart from 3D graphics being pretty slow, which I can kind of understand. I get the same behaviour on all of the last three kernels. I'm running the latest maverick on an HP 6715b. i386 version although the processor is 64 bit compatible. 2Gb RAM.
Running Suse 10.3, desktop box, Asus M2NPV-VM, Athlon 64 3800+, two HDD RAID 1 config. I was getting 'bad block' errors when logging into Root, ran a search for fsck to try and fix the problem. Found out not a good idea to run while the system is mounted, tried to boot from install DVD, could not boot to a command prompt, tried to open the Repair tool, got a 'repair failed' message. Rebooted again to the HDD, but now it hangs, tried to go to Failsafe mode, same thing.
Was able to boot to Recovery mode, but not sure where to go from here. I also noted when booting to the HDD in 'verbose' mode it was showing a lot of 'irrecoverable error's on the boot logs concerning the HDD.
I've got this really huge problem, which I really want to solve, because otherwise I might even switch back to ubuntu. So here we go. Yesterday, I had a problem with mounting nfts hard drives and solved (you guys solved it actually) it by adding ntfs to the /etc/filesystems file. (I doubt, that it has anything to with that, but it might, so I will just tell you everything I did) I added an ATI driver repository as well, which is probably the key to this problem.(or at least something with drivers) --> not sure if I installed anything
So however, the problem is now, that the screen tells me, the signal would die just before the log in screen appears. ("No signal" --> screen goes to standby --> can't wake it up again--> no opensuse for me) I'm now running the system in some sort of safe mode and it works, but I think, that it is using my on board graphic card and not the actual "radeon hd 5600", which provides much better quality. just looked it up, yes it is using the crappy one (on board) So here's the question: First of all why does this error occur(worked fine before) and secondly how can I fix it?
In summary, after updating from 11.2 through 11.3 to 11.4, normal boot works fine, failsafe mode hangs with two fatal errors - "Module atiixp not found" and "Module ide-pci-generic not found". i would like to fix this a) so I have a recovery position b) so I learn a little more. As 11.2 has gone out of support I decided to embark on the upgrades to 11.3 then 11.4 using the zypper method described on this site. I think failsafe boot worked ok with the original 11.2 install, but I never had to use it in anger, so I can't be 100% sure. I did not test failsafe in 11.3, just checked that the typical cd set of applications seemed ok before proceeding with the upgrade to 11.4.
I have an AMD processor, chip set and an ATI 3800 series graphics card, so I added the ATI repositories for 11.3 and 11.4 as i worked through the upgrades. At 11.4 there were some graphics glitches during normal and failsafe boot which were successfully fixed by adding "nomodeset" to both boot options. Normal boot works fine but failsafe boot hangs with the error messages above. Searching for failsafe boot errors is unhelpful since, in all cases I have checked, normal boot fails too. I did try removing "Xfailsafe" from the failsafe options which produced no change.
I am guessing that, in failsafe mode, the ATI drivers are not loaded into the kernel and the idea is to default to some safer drivers which, in my case, are not present for some reason. However, there seems to be little information on the origin or purposes of atiixp so I don't know how to go about fixing this. I have not really researched the generic pci driver issue, but I am guessing that this is a fall back when the expected atiixp is missing.
I am working on a small project for making a small configuration tool for ubuntu 9.10 for new linux users, that make their system working easily without knowledge of the linux commands.I created a gui in glade and loaded the gui with my python program to show up, now i wish to have some python codes that can launch a gnome terminal (and also pass some linux commands to it) on the click of a button contained in the glade file.
View 1 Replies View RelatedI am new to Linux. When I installed some applications and something through package manager,Now I get two added options in boot loader with identical names like failsafe and normal. what is that?multiple kernel?
View 3 Replies View RelatedI noticed that after making my build in suse studio my system freezes immediately after GRUB ( Normal or Failsafe) boot splash screen. I also noticed that this happens only with the specified kernel below. I'm not sure when using Kernel 2.6.37, one had the same problem. I never used it. The original kernel 2.6.34 had no problems such as the one I have described. My systems has no further problems only that it takes several restarts to go past the "Freeze". Below is a list of my system specs:
openSUSE 11.3
Kernel-pae 2.6.38.2-4.1 from Kernel Stable.
GRUB 0.97-174.1 from openSUSE 11.4
Upstart 0.6.5-33.1
xorg-x11-server 7.6_1.9.3-142.1 from X11:xorg 11.3 repo.
The GRUB from openSUSE 11.4 has been very stable and non-problematic. I will be buying an Intel core i5-2500K in a few months that's why I need the latest kernel and XOrg-X11-server. What could be causing the freezing?
I have difficulty in running Gnome Nanny in Lubuntu 10.04. Installation is easy just by adding repository and do sudo apt-get install. But clicking on "Parental Control" resulting in nothing and I do not know how to change the setting for example, email only and no browing?
I think Gnome Nanny is user friendly and suit my purpose to stop user access to browser internet but email only through zimbra.
I read somewhere that you cannot have Gnome 2 and Gnome 3 installed on the same system at the same time.
View 3 Replies View RelatedI have a Western Digital 1Tb WD10EAVS Caviar Gp Hard Drive. It does not have an operating system installed but it have alot of my important files. The hard drive began making a clicking sound and when I boot up my computer I see my other drives and the sata slot for that drive remains blank. Can any one help me recover or fix my hard drive
View 1 Replies View RelatedWhen booting Fedora 11, my system hangs for a very long time on starting udev. Sometimes I get an I/O error. However, my hardware is fine. I do eventually get in to the system.
View 7 Replies View RelatedIt looks,slackware is taking too much time to boot. It's starting daemons at boot time.
What are those daemons that i can stop at boot time to increase booting time?
What's the best way to stop starting daemons at boot time?
I am running Centos 5.3. I ran no updates, performed no installs, nor changed any configuration immediately prior to this issue. My problem is this: when I run the command startx (default runlevel 3), it is a long time (5-10 minutes) before Gnome startx, and once it does start applications will not run. Also, when I try to use sudo (from any environment, even ssh), it is a long time (5-10) before the command is executed.
I cannot say for sure, but it seems like this is an intermittent problem. Sometimes X takes a long time to start, but once it starts it will launch programs. Sometimes X takes a long time to launch, but once it starts it will only launch certain programs. Though presently X always takes a long time to start, and I cannot successfully launch any programs.
A while back a had a similar problem to this (x taking long time to start, sudo taking long time to execute) and it ended up being a DNS problem. Unfortunately, I cannot remember exactly what it was and I stupidly did not document it. Maybe this is also DNS related, I don't know.
I don't know what log files to look at for problems with X, Gnome, and sudo taking a long time to start.
I have avant-window-navigator in my startup appplications. This apparently causes gnome to use the Gnome icon theme on boot, instead of the Humanity theme I selected in Preferences->Appearance. I just have to go to Preferences-Appearance again to get the Humanity theme back to work (I don't even have to change any settings, just going there is enough.) When I remove awn from my startup applications, this problem doesn't occur.
View 4 Replies View RelatedI'm using Gnome Time Tracker 2.3.0 to track the time I spend on projects, it works fine except that my system just crashed and it does not show my recently tracked projects any more. does any one know of a way I can get this information back, it's quite important.
View 3 Replies View RelatedI've been a long time Windows user, but I've started a small firm and because of lack of funds, I've decided to install Ubuntu on my company's PCs.I have 8 PCs in total - 6 of them with Intel CPUs, and the last two with AMD CPUs. I bought the extra two computers because I've managed to find an extra two people to work at my company, and AMD-based PCs are cheaper so I've decided to buy them instead of Intel.Long-story short, I've installed Ubuntu 9.10 and boot time takes about half-an-hour. After the computers finally boot, USB hardware doesn't work at all. I was forced to buy PS/2 keyboards & mice and they both work fine after the PCs boot.I don't know what's causing this delay.I've enabled Cool 'n Quiet from BIOS.I've tried several instructions like editing the /etc/modules file.I've installed cpufreqd, tried to configure it, but it didn't work.I've check the CPU stats and my CPUs are running at 800MHz. I can't believe nobody managed to fix the 800MHz problem as I've noticed it's quite common among AMD Ubuntu users. I think I've tried almost anything that I've found on this forum.I can't keep asking my employees not to reboot their PCs. Both Chrome/Firefox crash a lot on Ubuntu so they're forced to restart their computers.The computer specs are: AMD Athlon II X2 240 dual-core @ 2.800MHz, 2GB RAM, 500GB HDD, etc.
View 9 Replies View RelatedSplashtop caught my imagination of my own tv like computer-"1button and ready to go " have tried puppy xpudWebConverger still unhappy Now lucid aming for 10 sec boot-Keeping ma fingers crossed installed a minimal karmic and am getting a decent 27 sec I Jus Wanted to ask: Is there a way to remove the grub an directly boot into ubuntu -not just hiding it by editing grub.d files and any other ways to reduce boot time.......
View 9 Replies View Related