So I was moving and resizing a ntfs partition and i just touched gparted window and it crashed!! it was about 66% of finishing the operation... Now i guess i have a big mess in my hard drive and i dont know how to start solving it! i am in a ubuntu live cd?
If i open gparted now it shows the same partition table than before resizing and moving.. so i guess now part of my data is in this unallocated space after the sda5 partition.
I have on sda1 Windows 7 installed. On sda2 I have 3 sub partitions (extended partition) with Ubuntu 10.04 and a swap space and one partition for /usr/local. Now I tried to move space from sda2 to sda1 using gparted. It's not possible. I deallocated space from sda2 which works. But I cannot merge it with sda2. Is that, because sda2 is an extended partition? Is there a work around without killing all partitions and lose my complete data?
View 4 Replies View RelatedI've installed Windows 7 + XP + Ubuntu 10.10 and Mac Os X on my PC. The problem is that XP wont boot. I've tried a lot of fixes for the last 2 days but still nothing. So I've come to conclusion that it might be probably due to its partition (dev/sda being inside of another Extended partition (dev/sda3) as you guys can see on the attachment. If so, how can I move it out of the extended partition.
View 9 Replies View RelatedI moved my /var partition using Gparted Live CD version 0.8.0-3. Everything went fine. But when I boot my Fedora 14, I get error message (something like "name_count maxed, losing inode data"). Maybe there are other error messages as well, but they scroll away very quickly. Is there any way to slow them down?
But the boot hangs after starting udev and setting host name to localhost.localdomain. It just hangs there. If I press the [Caps Lock] key, it toggles the Caps Lock LED. If I boot the installation DVD in Rescue mode, it mounts all partitions without problems, and the data is there.
Is running fsck -f sufficient to ensure my data is OK? Heres what's happenedy system crashed during a gparted operation. I was pretty sure however, that the data was OK since given the size of the drive and the amount of data and were it was when it crashed, I figured the crash occurred while moving empty space.Bottom line is I think the data is OK, but I am wondering what else I can do to check it.When I first ran fsck after re-booting the system it said it was clean. I then did fsck -f and it found and fixed errors in phase 5 (group summary). Now when I run fsck -f I think it's clean?fsck from util-linux-ng 2.17.2e2fsck 1.41.12 (17-May-2010)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
[code]....
I have 3 Ubuntu installations & a PCLINUXOS, plus Windows XP installed on one hard disk. I still can boot to each one of them and can mount each one using Ubuntu.
The problem "may" have occurred when I reduced the size of some linux partitions using gparted. I still have plenty of space in each of those partitions.
When I started gparted all of the HD was unallocated. I did that from each ubuntu installation and the PCLINUX installation, plus LIVECDs. All indicated the space was unallocated.
When I did an fdisk -l from a Puppy Linux LiveCD I got a normal start and ends of each partition.
When I tried it from Ubuntu installation or live cd, I received the following types of responses:
Code:
ubuntu@ubuntu:~$ sudo fdisk -l /dev/sda5
Disk /dev/sda5: 28.5 GB, 28566397440 bytes
255 heads, 63 sectors/track, 3473 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
ubuntu@ubuntu:~$ sudo fdisk -u /dev/sda5
The number of cylinders for this disk is set to 3473.There is nothing wrong with that, but this is larger than 1024,and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Plus the Windows partition seems to go over its limits.
Since all of my OS installations are still working, I don't know how critical this is. From reading another post, I understand this might be able to be fixed by making some changes in fstab.
I have a 160 GB drive on an Acer laptop. First 80 GB contains Windows XP. The second 80 GB .. unused .. is a logical partition with an unformatted 80 GB.
I booted ubuntu 10.10 Live CD to format the second half of the drive for installation of ubuntu in dual boot but in separate partitions. I didn't get that far.
When I launched GParted a crash icon appeared in the top panel and GParted closed down asking if a crash report could be sent.
This crash I saw also in xubuntu Live CD.
What other options do I have to partition the second partition (logical)? What would cause Gparted to crash?
I was reading another thread about someone with a bad partition table and I decided to join this forum. I'm not going to take any drastic actions with the partition (/dev/sda3) in question. I am going to wait for instructions on what to do first. I am not very good with Linux and need some hand holding. System: DELL 4550 Dual-Booted with XP and Ubuntu. Works OK, just no swap. Well, here's what I did: I deleted a partition for Windows XP Pro because it was a trial, and it ran out. I then decided to slide the swap partition for the Ubuntu Linux that I dual-boot into over. (If this was successful, I was going to try expanding the root partition to take up the unused space.) I used Gparted on a CD to do this, as I figured it was safe to do.
I now cannot mount the swap space at bootup (and have to go into a backup version of the OS), although I can use Gparted in Linux to execute the "swapon" command, and it appears that it worked because I now see "swapoff" as an option on the context menu. (I actually don't even need a swap partition, except to hibernate.) If I highlight the swap partition and click on "Drive" on Gparted's menu bar and select "Create Partition Table", it will erase all data on /dev/sda, so how do I fix the bad partition table non-destructively?
I usually repartition a disk by backing up, deleting the partitions, formatting them and repartition. I just did a 200 gig backup (so i am safe) and i want to join 2 (ext3) partition together, sdb1 (data4) and sdb5 (data5) into one big partition. Is there a way to do it without scraping the data in sdb5 (data5). It would save me from rewriting the data back to that new partition (200 gig is time consuming).
View 1 Replies View Relatedi can't resize my partition sda1?
View 3 Replies View Relatedsda2 and sda5 are the same partition. i set up sda5 because i wanted it to be ext4 just like sda1. i thought if i went ahead and formatted the second partition to ext4 it would just show up, automount and always be there. in my case it hasnt worked that way. is anything wrong with this, if so, how do i fix it?
View 2 Replies View RelatedI have a laptop with a 320GB disk. Windows 7 and Ubuntu 10.04 It has 8 partitions: [From Testdisk]
[code]....
Long story short, after reinstalling windows 7 and messing around a little with its partition and the other ntfs one (resizing etc); Gparted won't open the disk. It shows all the disk as unallocated space, And throws a message to the terminal which says something like "Can't have a partition out of the disk." Funny thing is that *almost* everything is working fine. Everything works except that ubuntu can't use the swap. (Dmesg says: "Swap area shorter than signature indicates") Also, testdisk, if i run a deep search for partitions, finds the last partition twice, but the second time the partition goes from 37129 0 1 to 40240 254 63 , while the disk ends at 38913 255 63. The problem is that I can't use Gparted now and I want to resize a partition.Also I believe that going without swap is not good for ubuntu.
What partition type does Mac OS X use, and can gparted create one?
View 6 Replies View RelatedI have a laptop with dual boot and I think because it is a dual boot I can't find the linux partition, installed when I knew nothing about linux, so I most likely went with the default settings, I'm an absolute convert now and have run out of space for ubuntu.So got on the net and seen many screen shots of gparted with a clearly visible linux partition, swap etc, so I make myself a gparted live cd and mine is just not there.Really don't want to do another ubuntu re-install. This k52f has too many setting to correct with ubuntu and took me a really long time!!
Or is there is a different solution to to this other than expanding a possibly hidden linux partition? Is the alternative storing files on a shared partition both os can share?
I've almost run out of space on the Ubuntu partition, so I figured I would re-size it using Gparted. However, Gparted is not showing that I have any partition in the main hard disk. What's going on?
View 9 Replies View RelatedI want to resize my linux partition using gparted. The partition in my hdd right now looks like this:
Uploaded with ImageShack.us
I dont want to screw this up, I know I have to use the gparted boot disk. But really, can anyone give me sort of step by step guide of how to resize my linux partition ( I was thinking in expanding it from the current 25gb to 30gb).
Can't start Ubuntu, stops after first password. I can access files on my encrypted partitions with LiveCD but I wonder if I can install Ubuntu and still have access to the encrypted drives as I can with LiveCD?
View 1 Replies View RelatedI have a new 1.5tb internal drive I want to partition as NTFS (because Windoze machines need to see/use it) and in gparted, when I go to partition -> new, it says it could not add this operation to the list a partition cannot have a length of -1 sectors. I recall having this issue on my 2tb external drive and I ended up creating the NTFS parition on a Windoze machine and then bringing it to the Linux box but since this is an internal drive, that's not an option. I took all the defaults in the "Create new partition" screen.
View 1 Replies View RelatedI was resizing my windows partition and accidently turned my computer off. When I went to run a disk check from gparted I get multiple filesystem errors. Chkdsk /r when run from a recovery cd says it can't determine the size of the partition so it can't continue. Is there anyway to get my files off the corrupted partition from within linux. Right now Gparted shows that it has been resized but that it is corrupted and i can't even attempt to mount it. There are only a few files I need to get off the partition but they are really important.
View 3 Replies View RelatedI've been trying to resize my root partition with gparted. I resize a ntfs partition to get more freespace available and I got 30GB of freespace and when I try to resize my root partition (unmounted) I can't do it, it's like I don't have any freespace.
View 6 Replies View RelatedI just installed ubuntu on my laptop and I was recommended to create separate partitions for root, home and swap. I was told that 15GB would be enough for a root partition but I am actually running out of that space very quickly after installing a few programs.
I wanted to resize it so I loaded up my live cd with Gparted and It won't let me resize it by more than 1MB. I also have at least 30GB of unallocated space on my hard drive so I don't know why I can't use it.
Here's some screenshots of GParted:
I copied 10.4 from a 20gig hd. onto an 80 gig hd with Clonezilla and now I can't get Gparted to expand the partition to include the 50 gig that is unallocated. Obviously I cloned the drive incorrectly.
View 5 Replies View RelatedI upgraded Windows to 7 from Vista. My Acer laptop had a recovery partition with Vista on it. I don't know, what I was thinking, after the update I deleted the recovery partition. Then got in to problem that Partition Table is deleted. Recovered the partition and partition table with LiveUSB and gpart.
So laptop was working again in about 30mins. Now I see the following issue. Laptop boots and works fine both in Ubuntu (default OS) and Win7. In Disk Utility the partitions are shown as in attachment. In Gparted the disk is not recognized as partition table is not recognized (so I guess) Output of fdisk is here for ref;
Code:
home@home-laptop:~$ sudo fdisk -l
[sudo] password for home:
Warning: ignoring extra data in partition table 7
Warning: ignoring extra data in partition table 7
Warning: ignoring extra data in partition table 7
[Code]...
I tried to install ubuntu on exernal drive and install grub there. But no joy. I had to do on primary master.
Now grub shows 2 linuxes on machine, which is a pain, since I cannot boot this other install on external from grub.
I am trying to delete and create that partion with gparted. But won't delete it, even after unmounting it.
I have tried to with the live cd. Here are a few screenshots.
http://i276.photobucket.com/albums/k...reenshot-2.png
http://i276.photobucket.com/albums/k...reenshot-1.png
think my partition table is messed up but i am not really able to fix it with my little knowledge about testdisk and fdisk. This is what the command fdisk -l -u reports:
Code:
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
[code]....
I am running a dual boot of WIndows XP and Xubuntu 10.10 and I want to have an NTFS partition so I access files in both OSs. From what I understand, it has to be a Primary Partition, not a logical one, right? The thing is, GParted doesn't give me the option to create a Primary Partition, only a Logical one inside sda2 (Xubuntu).
P. s.: I am running GParted from inside the Live CD.
Most times I use my brain but some how I really screwed up with deleting the wrong hdd's partition which was an 500GB NTFS with all of my custom programs, art, web design & so on which can not be replaced. Is there a way to reverse this process? Keep in mind I am not Linux friendly being I do not know the commands & so on so any copy paste commands with good detail on what it does would be greatly appreciated!
I used GParted to delete & already hit the accept but no other changes have been made on the HDD after that. I am currently running in Live mode as I was going to install on the 80GB which is the one I meant to delete but instead had a nice moment of insanity & deleted the 500 instead!
I have a dual boot machine ( win 7 & Ubuntu 10.04 ) which is reporting insufficient space on the Linux partition. I boot up into gparted and reduce the size of the the preceding partition but when I try to increase the size of the following ( linux ) partition, it won't allow it. Attached is a screenshot of the gparted info screen.
View 6 Replies View RelatedI was trying to remove my windows partition using the live CD. While Windows no longer works on my system, GParted shows that I still have 40 gb of unallocated space. Have I not properly occupied the space left after I removed the Windows partition.
View 8 Replies View Related
