I am going to move my ubuntu to a different drive. Right now I have it on my primary sata drive in an extended partition. I want to move the whole installation to a different drive. Is there any way to do this without reinstalling ubuntu. Grub is installed onto my 100mb windows 7 boot partition. Is there a way to make grub point to the moved ubuntu installation on the different drive?
View 5 Replies
I have Fedora running on my computer at school and have been informed we are getting new computers.
Can I simply move my hard drive to the new computers? I don't have to reinstall do I? Would I have to use a new kernel?
I installed Ubuntu 10.10 on my laptop alongside Windows 7 on the second 320 GB hard drives and now I want to replace it with a 750 GB hard drive, but when I removed it the grub was gone and Windows (on the first hard drive) wouldn't load. This was a mistake, since the grub is installed on the same hard disk as Ubuntu. I want to use GPorted to delete the partitions on the hard drive, but when I boot with it and use the hard drive partition editor it won't let me delete or move one of the partitions. Does this partition contain the grub and if so how do I move it onto my other hard drive?
View 3 Replies View RelatedI recently installed Debian (*former Windows user*) with xfce and I only aligned one partition. I have a 80gb SSD where I have the OS and apps. I just now installed a hard drive which I'm going to use for documents, pictures, music etc., but I haven't mounted it yet. I'd like to move /home to it's own partition on the second drive, and I'd like the desktop to be on the HDD also, but I don't really have any idea how to do this and haven't found any information about this (that's why I haven't mounted the HDD yet either). I'd like to keep the SSD purely as a drive for OS and apps so if there's anything else I should consider or if there's a better approach for this?
View 14 Replies View RelatedLets say I have /dev/VolGroup00/LogVol00 which is a 5.8 GB ext3 partition that resides on a 10GB drive. This is just a logical volume partition, one of a few... this being the one that isn't swap, the main data.
I have a 20GB drive... I want to move the LogVol00 to it, and it is /dev/sdb. I partition /dev/sdb1 to be 8192 MiB in size in gParted.
I move as such:
dd if=/dev/VolGroup00/LogVol00 of=/dev/sdb1
The operation finishes with no problems.
Fsck reports clean... so... I run:
fsck -l /dev/sdb1
A few small errors pop up and they get fixed.
My free space remaining, as expected, is 5.8 GB.
I go into gParted and resize the partition to 15GB in size, still working on the 20GB drive.
It does so, the operation completes.
I have what I want: the partition was taken out of LVM, data was retained, I have no issues resizing it. Additionally I tried writing random junk to this new filesystem to test to see if it's broken, and also deleted 3gb of files already on it with no problems.
I just want someone to look this over and tell me if they see any problems with what I've done. I've tested this twice so far with success each time. Is there a better or easier way to do this? I do not want to keep LVM for various reasons. By the way, you might be wondering why I made the partition 8GB for an almost 6GB system. Because the first time I did it, I put down a number that was too exact and it didn't work. Overestimating to 2GB fixed the issue - I'm guessing this is probably due to block size.
Old drive is dying, so I copied the system over to my new drive. I've moved /home and /tmp to separate partitions and updated fstab and grub with the appropriate UUIDs from blkid. Grub wasn't loading but that's been fixed now.
Problem:
The problem now is that when I boot I get the following screen:
Errors were found while checking the disk drive for /
Press F to attempt to fix the errors, I to ignore, S to skip mounting or M for manual recovery
F doesn't work, and in manual recovery the file system is read-only. How to proceed?
F-10 default installation is /swat /boot and the rest /
Many on this site recommend setting up separate partitions for /home
Does making a separate logical volume and putting /home in it do the same in allowing one to do an install to the original logical volume without affecting /home?
If it does, how does one get the 2nd LV recognized in the file system?
I'm trying to copy files from my external hard drive to the desktop and instead of the usual copy or move to options, I get a widget menu! How do I correct this so I can copy files?I'm running opensuse 11.3 KDE 64bit
View 5 Replies View RelatedI installed debian 8 on a 16 GB usb drive using this guide. I used a debian 8.2 64-bit image with mate. If I were to get a larger usb drive, would I be able to transfer everything from the 16GB drive to it? How?
View 1 Replies View RelatedI want to move my old system to a new drive. Currently I have Debian installed with following configuration:
I have an encrypted system where everything is encrypted except /boot. Currently I've /boot and / installed on a 16 GB mSata SSD and /home on a regulard HDD. I've got a 500GB SSD for Christmas and want to move the whole system to the new SSD.
I just wanted to ask if I've got the process required to to this down:
1. backup root-directory (/) without and /boot /home using tar keeping file-permissions and owners to ext. hard drive
2. backup /boot and /home separately using the same method
2. replace HDD with SSD remove mSATA SDD.
3. boot via live-usb
4. create appropriate volume groups, partitions, setup encryption etc.
5. extract backups to appropriate partitions
6. chroot to old /.
7. edit fstab
8. reinstall grub
9. create new init ram img.
I'm pretty sure I've got steps 1.-6. down but I'm very shaky on what to do next.
How can I move a directory to the root of a drive via command line?
In MS-DOS it would be 'move C:/GAMES/QUAKE C:/'
What is the equivilent in Linux?
As my proficiency with Linux improves slowly, I've been trying to find the answers for myself, but in this situation I must admit I find myself rather stumped. I have a perfectly nicely working Fedora 12 install on an 80GB SATA drive, and when it hit an error and wouldn't boot last week (easily fixed with fsck from the initial command line) I panicked and ordered a new 250 GB drive. It got here and I might as well use it, I thought to myself, so I went about trying to figure out how to move my install without having to reset all of my settings, programs and so on. I didn't want to mess with dd because I'm not so so clear on resizing my partitions once the copy is done (if someone thinks this is a better idea I'm open to suggestions.) After some poking around I found this set of instructions which I attempted to follow to the letter, but hit some snags. I understand this thread I am referring to may be a bit outdated, which is why (I assume) I hit a bump here
Code:
# mount /dev/hdy1 /boot
mount returns an error demanding I specify the file system type. At a loss, I barreled on until
Code:
[Code]...
To summarize, I partitioned and mounted my new drive using fdfisk and the instructions provided above, then used rsync to copy over all of the files, so as far as I know the new drive is ready to go, just not yet bootable. Opening the Grub.conf file in Kwrite (as root) returns a blank page. What do I do now?
As a side note, you can see that I am not too squeamish about the terminal, so I would prefer to find a "command line only" solution to this relatively simple (?) procedure.
I like the buttons on the left. I'm running 10.04 & I know how to move them. The problem is that changing themes will move them back right. OK, if the new theme has them on the right that's OK. But going back to the other theme doesn't change them back. They don't seem to be controlled by the theme, or I'm just not doing it right.
View 2 Replies View RelatedI have installed fedora 11, now i want to install touch driver for my dell 15 laptop. when i m moving cursur its moving but when i m clcking on touch pad to open anything its not opening, to open i have 2 select any file then i have to click touchpad keys.
View 2 Replies View Relatedtoday I obtained a computer from a friend who had just bought a new computer, and they were getting rid of the old one. Being a linux user I couldn't let a perfectly good albeit slow Windows XP computer go to waste. With Ubuntu 10.04 install it is lightning fast. I've noticed it is faster than the current computer I use as a server, and want to migrate the HDD over to the new machine. I know there are issues when doing so with Windows as it registers the hardware and has major heartburn with this, so I was wondering if Ubuntu or linux in general will have any problems. I simply want to move it over.
I don't have a problem with reformatting as it has it's own /home partition, but for obvious reasons I would like to minimize down time. I did a search on google and on the forums here and I didn't find what I want to do.
I work with ubuntu 10.10 64 bit on a hp pavilion 2713ca laptop. Everything is fine presently, except for the fact that I will be soon out of space on the actual sda6 partition (only 2 gig left).
I would like to move the ubuntu partition with all its content to a second one where there is a lot of space, that is sda2. So my question would be twofold.
1) What software can I use to do that (gparted, clonezilla, ... ) and is someone is familiar with the procedure?
2) Will there be an easy way to change the grub.cfg file? (for example, will the command grub update be enough to boot to new setup)
I run a dual boot machine with XP pro and Ubuntu 10.10.I want to change the 10.10 to the netbook remix version. How do I install remix instead of 10.10 without damaging XP?
View 2 Replies View RelatedI have a IBM T42 (using it now to write this) and a newer Lenovo T500 (with a fresh install of Ubuntu 9.10 on it). I want to take all of my programs and config of those programs, plus all my /home directory information/files/hidden files all over onto the new machine. There may be other stuff I need to take over to, and don't know enough about to comment here.
But basically I want my new system to look and work like my old system, with all the same programs and user data, all configured in the same way. Is there a way to do this over the network or another way? I can't even get the two systems to see each other over the network, even though Folder Sharing is enabled and (I think) all the right components are installed. I even checked to see if my user had permission to share files on both machines, and I do.
Currently I am running Ubuntu 9.10 on an older P4 system with EIDE harddrives. My primary HD has a WinXP installation and GRUB. Ubuntu is installed on the secondary HD.
I am happy enough running Ubuntu that I would like to remove my WinXP disk, move the disk with Ubuntu on it to be the primary boot drive, and then install a new drive as the secondary.
However when I tried to simply move the drive with Ubuntu on it from the secondary to the primary EIDE position the system would not boot. I assume that this is because there is no boot loader currently on that drive.
how do I put GRUB on the Ubuntu drive so that it can become the boot drive? Or is there some other way to accomplish what I am after without having to reinstall Ubuntu?
I've been setting up a media server on a an actual server machine I picked up dirt cheap, and had it running xUbuntu fine. gave it a 5gig root directory, 5gig swap partiton, and three 34gig storage drives. Everything was running smoothly.
Just recently I learned that the 5gig's dedicated to running my operating system of choice, aren't enough to install all the software I wanted(I might be just a little greedy). The first logical step to correcting this problem was to move /etc to one of the storage drives and create a link were it was, but not being entirely sure how xUbuntu would take that, I thought I'd get an expert opinion.
The thread prefix is "all variants" because I have installed the desktops for kUbuntu and just plain Ubuntu on this machine(what I meant by being a little greedy).
I have run Ubuntu in the past and then switched to OpenSUSE several months ago and set up raid 0 on a 500gb hard drive and 700gb hard drive (I went with openSUSE because of the graphical raid setup.)
My whole partition setup looks like this:
500gb Hard Drive:
750gb Hard Drive:
md0 is the two 400gb partitions on each drive for a total of 800gb space on my /home partition ext4 filesystem ( 380gb space used ) md1 is 100gb ext4 / partition.
all raid 0
Now I was wondering if I downloaded the alternate install cd for ubuntu ( as OpenSUSE has crashed for the second time because of bad updates ( starts, but gets to terminal only ) ) would I be able to keep my raid 0 home partition and wipe the rest of the each drive and setting up Ubuntu keeping all of my files and settings intact, just to install my programs I need all while keeping my old settings ( such as firefox bookmarks, virtual box utilities etc. ) intact.
From what I know it's possible, but I don't know much about the Ubuntu Alternate install disk ( as I have been dealing with dependancy hell on OpenSUSE ) but in OpenSUSE it wont let me keep the old raid setup ( md0 ) Im guessing it is possible to set up the home directory on a different hard drive and then going back into the live cd, editing the fstab, and switching it to md0, if this is even possible, or would I need to configure the driver on that system before I did that Oh and I forgot to mention that I've only been running 64bit operating systems.
System Specs: AMD Dual core at 2.8ghz ( overclocked, stable, cpu ran at full bore for a day. only reaching 120f) Nvidia 9600 gso 368mb ram, 4gb ram at 800mhz
After having encrypted my windows partition, truecrypt overwrote my mbr, and now I can't access grub during boot, not even when I press escape I was thinking of restoring my original mbr with the truecrypt rescue cd, boot into ubuntu and copy the mbr to the ubuntu partition, how to do it.
View 2 Replies View RelatedWould this be a simple case of just installing a fresh copy of Ubuntu 10.04 on my HDD, then copying everything from the USB over? I, of course, would need to update grub to load from the HDD instead of the USB. Would there be any other way to accomplish this?
View 9 Replies View RelatedI have two "Ubuntu" installations, for the record. My HDD is laid out like so:
PRIMARY - First Ubuntu
PRIMARY - Second Ubuntu [XBMC Live]
4GB Free
14GB LOGICAL
-4GB Free
-10GB Swap
Now, GRUB is currently on XBMC Live. I have terminal and root access if needed, and a "Live CD" ready to use. What I want to know is how I can move GRUB, preferably on its own partition but it can go back the the first partition.
I've tried to install Ubuntu 9.04 last year but my modem was malfunctioning, so i gave up on Ubuntu, but i got a new modem and installed Ubuntu using wubi, i loved it and ill make it my main OS, but now i have 2 problems:
1.-I tried using lvpm, but i ended up with a 60 GB new.disk and my hard drive has just 30 Gb (30 gb wubi installation and the 60gb from the new.disk)
2.-i dont know how to shrink windows partition and i dont want to loose my config, tweaks and installed apps my hard drive has 230 gb capacity and i want to leave at least 100 gb to windows
I decided to uninstal wubi and im going to install ubuntu the right way.. it just seems easier..
I am a new user of Ubuntu (11.04) and I have a slight problem. I currently have windows 7 and Ubuntu 11.04 dual booted on my HP Pavilion machine with grub menu replacing the regular windows boot-loader. How exactly can I transfer Ubuntu from one hdd to another without damaging the grub menu or windows 7?
View 1 Replies View RelatedI have limited experience in terminal, but let me first explain what I am trying to do to see if there is some easier way to do it. Basically I want to change the skin in aMSN. I downloaded the new skin but am unable to unzip or move it without /root permissions. I don't know how to acquire this without being in terminal. So I figured there had to be some way to go into the terminal and use it to move the unzipped folder from the desktop to the aMSN skins folder.
View 3 Replies View RelatedI have on sda1 Windows 7 installed. On sda2 I have 3 sub partitions (extended partition) with Ubuntu 10.04 and a swap space and one partition for /usr/local. Now I tried to move space from sda2 to sda1 using gparted. It's not possible. I deallocated space from sda2 which works. But I cannot merge it with sda2. Is that, because sda2 is an extended partition? Is there a work around without killing all partitions and lose my complete data?
View 4 Replies View RelatedI have 1 HD with the following OSes, each on his own partition:
p1 WinXP
p2 Win7
p3 Ubuntu
p4 Ubuntu Studio
p5 Unallocated (not actually a partition)
I intended to create a 5th partition, formatted as NTFS, for data. That's when I found out that Windows only supports 4 partitions per disk (yeah, I know, should've looked it up first). On Win7 Disk Management applet, they're all listed as "Primary Partition".
I've come up with a few possible solutions: s1. Move partitions p3 & p4 down towards the end of the HD, and add half of the available space to partition p2 (Win7) and the other half to partition p4 (Ubuntu Studio).
s2. Move partitions p3 & p4 to the end of the HD, and add all available space to partition p2 (Win7).
s3. Increase partition p4 (Ubuntu Studio) to take up all the available space.
My questions:
q1. Win7 Disk Management applet gives me no option to move or resize (other than shrink) the partitions. Does this mean I'll have to use another partition manager (e.g., gparted)?
q2. If I move the partitions p3 & p4 (both Ubuntu), will there be any impact on grub?
q3. Is there any way to turn partition p4 to extended instead of primary? If so, what are the consequences?
I've installed Windows 7 + XP + Ubuntu 10.10 and Mac Os X on my PC. The problem is that XP wont boot. I've tried a lot of fixes for the last 2 days but still nothing. So I've come to conclusion that it might be probably due to its partition (dev/sda being inside of another Extended partition (dev/sda3) as you guys can see on the attachment. If so, how can I move it out of the extended partition.
View 9 Replies View Related
