Ubuntu Installation :: Moving Over Root And Home Into New 9.10
Jan 17, 2010
I have a IBM T42 (using it now to write this) and a newer Lenovo T500 (with a fresh install of Ubuntu 9.10 on it). I want to take all of my programs and config of those programs, plus all my /home directory information/files/hidden files all over onto the new machine. There may be other stuff I need to take over to, and don't know enough about to comment here.
But basically I want my new system to look and work like my old system, with all the same programs and user data, all configured in the same way. Is there a way to do this over the network or another way? I can't even get the two systems to see each other over the network, even though Folder Sharing is enabled and (I think) all the right components are installed. I even checked to see if my user had permission to share files on both machines, and I do.
View 7 Replies
ADVERTISEMENT
Mar 4, 2010
I have limited experience in terminal, but let me first explain what I am trying to do to see if there is some easier way to do it. Basically I want to change the skin in aMSN. I downloaded the new skin but am unable to unzip or move it without /root permissions. I don't know how to acquire this without being in terminal. So I figured there had to be some way to go into the terminal and use it to move the unzipped folder from the desktop to the aMSN skins folder.
View 3 Replies
View Related
Sep 4, 2010
I tried installing on a Win 7(64 bit) machine. The install procedure gets to the partition menu, and there it stays. all my menu options are dimmed out and I have the choice to cancel move forward or back up. Moving forward gives me the error, "Root menu not defined.." or something like that..
It has created a mutliple boot system though.. so now I can choose.. it must have installed via a live session I did prior with the cd..
View 3 Replies
View Related
Aug 5, 2010
Just finished building a new Ubuntu box and have been getting things setup. I have a new SATA 500 gig drive in the new system. My old IDE drive from the previous system is in and mounted. I can currently boot to either by flipping the BIOS info. Not sure if I can mount the SATA while booted to the old IDE tho, get mount errors at startup.
So, my plan is to move the essential bits of my /home into a storage area, and take ownership of them, so I can import my old mail and other essential stuff. When I try to copy from the SATA drives new install I get permission errors, and all the files are owned by #1002. Seeing how my brain is toast due to heat and working on this build for about the past 8 hours, can anyone give me a simple way to copy over the info from the IDE drive (which will be going away) to the SATA drive and have the data usable for import into my home folder.
View 2 Replies
View Related
Apr 23, 2010
I know there is a lot of tutorials about this but I`m kind a new in Ubuntu and Linux. I know that it is good to set different partition for /home. But when I installed my ubuntu 9.10 I made 4 partitions
swap
/boot
/ - 40GB
/usr - 200GB
[Code]...
View 2 Replies
View Related
Feb 25, 2010
I want to install from scratch or change a current system, which ever works best to have the following partitions: I have a 160GB HD and want a 50GB root partition 3 GB swap and the rest for home. When i go throught the guided partitioning process the largest i can get is 8GB. The root partition is the bootable partition correct?
View 2 Replies
View Related
Jul 16, 2010
I am trying to move my home directory from my install partition to a new partition. I cloned my installation from a previous ~78 gb HD using g4l to a new 250 GB drive. Now that I am using the new drive i created a new partition to used for files called "files". New partition is sda3 and the boot partition is sd1. I am trying to follow this guide [URL] but I am having no success.
The output of:
Code:
find . -depth -print0 | cpio --null --sparse -pvd /media/sda3
is
Code:
pio: /dev/sda3//./.jungledisk/cache/jd2-a114b643324c576f1c36e3f17a9043f4-us/Files/cf-1381.tmp: Cannot open: Not a directory
cpio: `/dev/sda3' exists but is not a directory
cpio: /dev/sda3//./.jungledisk/cache/jd2-a114b643324c576f1c36e3f17a9043f4-us/Files/cf-1336.tmp: Cannot open: Not a directory
cpio: `/dev/sda3' exists but is not a directory
cpio: /dev/sda3//./.jungledisk/cache/jd2-a114b643324c576f1c36e3f17a9043f4-us/Files/cf-1387.tmp: Cannot open: Not a directory
cpio: `/dev/sda3' exists but is not a directory .....
View 6 Replies
View Related
Aug 5, 2011
I did some minor upgrades to my 10.04 box which grew and grew and grew until I'd hosed xorg, and after some unwise choices about uninstalling X11 as a means to rebuild the system I now have a drive I was using for 10.04 that basically doesn't have an O/S any more... don't ask! First class stupid.Anyhow, I've cracked open a new drive, installed 11.04 and was planning to mount the old /home/me folder as a symbolic link from 11.04. All that was fine until I remembered that 1) I no longer have an OS on my 10.04 drive and I've encrypted my home folder on the 10.04 machine. That home folder is still intact, but obviously not much use right now.
So, have I just hosed myself completely (as I suspect) hosed myself or is there a way to capture the cleartext data from the encrypted folder and move it into the 11.04 machine, either with rsync, restoring the O/S to the formerly 10.04 drive and restoring the encryptied /home to that drive?
Goal 1) recovery contents of encrypted folder to plaintext, but lacking ability to log into O/S that generated the /home folder
2) move data to 11.04
3) attach the cleartext verison of home to my 11.04 account and get to work.
View 6 Replies
View Related
Jun 25, 2010
Looks like I missed defining a /home dir during installation. It's been a while I have a spare partition now that I'd really love to use. Can you specify this still, or is it only allowed during an install?
View 3 Replies
View Related
Dec 21, 2010
how I managed this, but somehow during a reinstall I changed the ownership of all my home stuff to root, instead of my normal username. So now nothing loads, unless I sudo it. I had to use sudo just to open firefox.
View 3 Replies
View Related
Apr 28, 2011
I will be installing Natty using the alternative CD.My system has a separate Home partition.Do I need to erase the contents of the Root and Home partition with gparted or similar,prior to the fresh installation of Natty or will the installer take care of all that automatically?
View 5 Replies
View Related
May 29, 2011
How would you go about moving one users home folder to a different partition, while maintaining other users home folder on the current one. Will simply running "usermod -dm /path/to/new/home username" on one of the users do the trick.
I want to run one of the users of an SSD, while the other runs of a bigger SATA disk.
View 9 Replies
View Related
Dec 20, 2010
I recently installed Debian (*former Windows user*) with xfce and I only aligned one partition. I have a 80gb SSD where I have the OS and apps. I just now installed a hard drive which I'm going to use for documents, pictures, music etc., but I haven't mounted it yet. I'd like to move /home to it's own partition on the second drive, and I'd like the desktop to be on the HDD also, but I don't really have any idea how to do this and haven't found any information about this (that's why I haven't mounted the HDD yet either). I'd like to keep the SSD purely as a drive for OS and apps so if there's anything else I should consider or if there's a better approach for this?
View 14 Replies
View Related
Jul 25, 2011
can't cd to root acount /home in terminal - sudo cd /root fails?
View 3 Replies
View Related
Apr 4, 2010
Ok. I have a media server running debian amd64. when I installed it I made separate partitions for root (/) home (/home) var (/var) and swap.
I'm adding some new hardware (mobo and ram) and want to reinstall debian. I would like to keep my home and var partitions intact and just reinstall everything in root (/) partition.
I'm unsure of how to do this during the installation. Do i need to format? how do I tell it to use the /var and /home partitions?
View 4 Replies
View Related
Feb 1, 2011
1. yum install vsftpd
2. service vsftpd start [ok]
3. nmap from outside verifies tcp 21 is open for business
4. ftp myipaddress.com results in login failed for user root.
I want to login as root and have access to '/' as my home directory. What do I have to do to get this to work?
View 2 Replies
View Related
Jan 12, 2010
1. Pentium 4 with 1.8 gh 2. 512 ram 3. 15 gb hard disk. installation specially regarding partition option (eg.. how much alloted should be for swap/ root/home etc)
View 1 Replies
View Related
Oct 28, 2010
So when I try to move the home directory to another point, the sound stops working magically. Well actually the sound still works, but the controls don't work. Here is what I am trying to do.
My home directory is currently at /home/user I want it in another independent partition so I copy all the contents from /home/user to /dev/sda5 and then I mount /dev/sda5 to /home/user with rw permissions. Everything works perfectly, even my mozilla profile is copied and such, but the sound somehow disappears. When I comment out the line from fstab that mounts the the filesystem at /home/user, naturally things go back to normal because my folder at /home/user that was earlier becomes my home again. Things are working again. I can go back and forth, doesn't help.
Here are the specs, though they are irrelevant as everything including the sound works as long as I don't try to change my home dir. I'm using a Thinkpad T410. The destination filesystem btw is ntfs for my home directory, I know it's not suggested and most of you here will feel like lecturing me on how i shouldn't be using ntfs, but the point is I want to have my "Desktop" "Documents" "Pictures" "Videos" "Downloads" and everything in the same place for both windows and linux. So if moving the home directory to NTFS is strongly unadvisable, let me know how to move each of these folders to a desirable location. Here's what lspci has to say about audio device.
Quote:
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
View 9 Replies
View Related
Jul 15, 2009
F-10 default installation is /swat /boot and the rest /
Many on this site recommend setting up separate partitions for /home
Does making a separate logical volume and putting /home in it do the same in allowing one to do an install to the original logical volume without affecting /home?
If it does, how does one get the 2nd LV recognized in the file system?
View 3 Replies
View Related
May 11, 2011
I want to move my / partition to the end of my drive (sda). To do this with gparted, I have to unmount it, but I'm not comfortable with the idea of unmounting root partition... Should I do it from a live cd? More important : is the operation safe?
View 5 Replies
View Related
Jul 11, 2011
I know it is possible to move the ubuntu home directory but what is the best way to move it safely to an NTFS partition that already has valuable data in?
View 8 Replies
View Related
Jun 29, 2010
From what I have understood, trying out different Linux distros is one of those things that a Linux user just needs to do now and again.
So what is the "best" way of keeping your home folder intact? Should I just copy the whole home folder to a separate storage space, install a new distro (I'm thinking going from Ubuntu to Suse) and then just past it in the newly installed distro? Or are there some other, more "refined" methods?
I thought one's home folder contains a lot of config and settings files, but they would surely just be applicable to the original distro!?
I know I can try out several distros via live CDs, which I have done, but when you've taken that next step and actually want to install another distro as your main Linux operating system.
View 7 Replies
View Related
Sep 26, 2010
I have formatted a second internal drive as ext3. It worked fine until I copied (rsynch) my /home to the new drive. Now when I try to delete anything I'm forced to delete immediately or skip the deletion. I also tried moving the /usr/local directory to the second drive and it works fine, it doesn't break the Trash. I tried moving /home back to the root drive and the problem is gone. The second drive again works properly. I can reproduce this. The problem only occurs when I move the /home directory to the new drive.
# / was on /dev/sda1 during installation
UUID=89a54f23-98ef-45d2-bef9-47d51992fd01
/ ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=fb609b91-7322-4903-9309-2f0d3a6b87d4
none swap sw 0 0
# My shared volume /dev/sdb1 (show it on desktop)
UUID=a726a583-03e5-47c6-9618-ddbfcdd4c1d6
/media/data ext3 defaults, users, exec0 0
# Moving /usr/local
/media/data/Ubuntu/usr/local
/usr/local bind defaults, bind, users, exec 0 0
# Moving /home
/media/data/Ubuntu/home
/home bind defaults, bind, users, exec 0 0
View 3 Replies
View Related
May 15, 2010
Because I am using one of the new WD disks I am trying to aling my root partition with the real sectors, as described here:[URL]31So I copied all files to a temp location, deleted my partition (/dev/sda3), recreated it a few cylinders later (same name) and copied the files to the newly created partition. But now when I try to boot, I get my old grub menu but after selecting my kernel version it hangs
View 15 Replies
View Related
May 19, 2009
I've setup a filesystem on a RAID 0+1 and am looking at moving root filesystem from a single disk to the new one. I could not install CentOS on mirrored filesystem as the RAID card did not have a pre-built driver for CentOS 5.3, so I had to compile the driver after installing the system.What I'm going to do now is:
1. Mount the new mirrored filesystem under /root1
2. use find | cpio to copy everything from the existing / to /root1
3. use grub to create a boot record on /root1
4. edit /root1/etc/fstab to point / to the new disk
5. reboot the system and keep my fingers crossed
Is this the way to go? Am I missing anything?
View 3 Replies
View Related
May 19, 2009
Ive setup a filesystem on a RAID 0+1 and am looking at moving root filesystem from a single disk to the new one. I could not install CentOS on mirrored filesystem as the RAID card did not have a pre-built driver for CentOS 5.3, so I had to compile the driver after installing the system.
What Im going to do now is:
1.Mount the new mirrored filesystem under /root1
2.use find | cpio to copy everything from the existing / to /root1
3.use grub to create a boot record on /root1
4.edit /root1/etc/fstab to point / to the new disk
5. reboot the system and keep my fingers crossed
Is this the way to go? Am I missing anything?
View 6 Replies
View Related
Feb 9, 2011
I am installing Ubuntu on the same hard drive as Windows 7. The partitions of Windows 7 have already occupied the left part of the hard drive. From left to right, the Windows partitions are one partition for Windows booting, one for Windows OS and software installation, and one for data which is planned to mount on Ubuntu. I was wondering how to arrange the order of partitions of root, home and swap, i.e. which is on the left just besides one Windows partition, which is in the middle and which is on the far right?
View 1 Replies
View Related
Mar 4, 2010
My root filesystems flooded so I'm trying to move it to another (bigger) partition but I'm not sure of the best method. I just tried to use "dd if=/dev/sda1 of=/dev/sda6" to copy it but all that did was give me a brand new partition with no freespace available presumably because the filesystem is smaller than the partition. Is it possible to make the filesystem bigger?
View 8 Replies
View Related
Oct 17, 2010
How can I move a directory to the root of a drive via command line?
In MS-DOS it would be 'move C:/GAMES/QUAKE C:/'
What is the equivilent in Linux?
View 8 Replies
View Related
Mar 3, 2010
I just did a clean install of Ubuntu 9.10 Karmic last night (completely wiping out Jaunty), and since the install, my "Home" key hasn't worked right. To be more specific, it's the Home button that exists in within the 6 keys: Insert, Home, Page Up, Delete, End, Page Down - not the Home button within the number pad.
The other keys work properly, but Home keeps loading Evolution. I removed Evolution to see if it would stop, but of course it didn't. (I didn't think that would work, but it was worth a shot.)
This keyboard is very similar to the one I am using: [URL] A big difference between that one and mine is that I have the windows buttons on mine, so I guess it's a bit newer than in the link.
View 9 Replies
View Related
