I have tryed to install Ubuntu 10.04 using both the USB flash drive andthe live cd and both have not worked. The load screen appears and right as it looks like it is done loading and is about to bring up the menu it goes black and my monitor says that there's no signal
View 3 Replies
i wiped my entire hard drive that had xp as its only OS. I freshly installed a Windows 7 ultimate and everything went perfectly. I then decided to install 10.4. I split the partitions correctly (i had experience doing this already with my laptop, which has xp/10.4). Ubuntu 10.4 install went flawlessly, except for one thing. Now when i boot up the pc, it goes straight into 10.4. I have tried holding shift during the start up to force the boot menu, and it just shows the Ubuntu 10.4 OS as choices. Any clue what i could do to make Win7 appear in the boot menu?
View 9 Replies View RelatedI've done a clean install of XP Pro on my HP XW8200 (Boot drive is 2x73GB SCSI drives set up as RAID 1)I've run the Ubuntu 10.10 desktop installer and partitioned the drive, installed ubuntu and rebooted when requested.No OS selection screen appears after POST though. Just goes straight into WinXP. The startup options in XP only show XP.Rebooted from the Ub10.10 live cd and checked that the partition is there and the OS files are there.
Any ideas why the grub menu doesnt appear?I'm assuming it's something to do with Ubuntu not seeing the RAID drive but it did install ok..
I have Ubuntu 9.10, PuppyLinux431 and Windows XP on a Toshiba laptop. I like Ubuntu, but the speed of PuppyLinux is addictive, so that was my default boot until I upgraded Ubuntu which included an upgrade to Grub2.
My problem: Grub2 doesn't recognise PuppyLinux. Using information from [url] I have made an executable file named 07_Puppy in /etc/grub.d and did update-grub from root. Still no luck. I can boot PuppyLinux from the grub command line using the following commands:
Just before grub displays the boot menu, I think I see a very brief message about a syntax error, but it's gone before I can read it.
Here is the contents of my grub.cfg:
Quote:
Why Grub2 doesn't see Puppy and let me boot it from the menu?
I tend to update stuff slower than most - I'm still using Hardy and I probably won't upgrade to Lucid until June-ish. I wanted to test drive GRUB2 so I upgraded following instructions here:When I chainloaded GRUB2, I got a menu that only contained Ubuntu; my Windows Vista bootloader entry had disappeared. I couldn't find a sample "40_custom" entry to modify when I tried to create an entry for Vista myself. Had no problem booting into Ubuntu and I could still boot Vista from the old menu. Spent about 20 minutes on it, then I gave up and reinstalled legacy GRUB.
View 9 Replies View RelatedI have a /boot partition, and the online update process has downloaded the upgrade to /boot/upgrade. The problem is that grub is actually booting from a directory /boot which is in the root partition, but is invisible once the machine has booted, because the /boot partition is mounted over it. The result of all this is that the upgrade option does not appear in the boot menu, because that option has been inserted in the menu.lst (or grub.conf) in the /boot partition. is it ok for me to run:grub-install /dev/sda4(that's the device that contains the /boot partition where the upgrade menu option and data). Also, do I need the --root-directory option, given that the boot directory is the root directory of that partition.
View 3 Replies View RelatedSystem>Prefrences right? It's not there? Everywhere I look It says it should be there,.. well it's not... How can I add it manually? or where is the folder? I would like to edit my themes.. I have a theme manager, but it doesn't load any themes I download..
View 4 Replies View RelatedI recently upgraded to 10.04. The grub menu shows my windows partition but does not load it when I select that OS.
View 2 Replies View RelatedI downloaded the 32bit iso from the ubuntu website and wrote it to disc using imgburn.
The problem is that when i boot from cd i get the loading splashscreen with the 4 dots flashing then it loads the ubuntu background and my mouse curser spins around for awhile then tells me the installer encountered and unrecoverable error and a desktop session will now be run so you may investigate and problem or try installing again. When it reboots it asks for a username and password. i use ubuntu and blank and then it does a loop and the logon menu comes up again.
the computer is an old acer aspire running xp home sp2
i tried it on another computer a dell laptop running vista and it worked fine and can up with the menu and i clicked try now and it booted into the gui.
9.10 has no menu.lst file and hitting ESC to does not bring up the grub menu. How can we set bootup options or boot an alternate kernel? I would really like to set the resolution at boot time so that my console (Ctrl-Alt-F5, for example) has 80 columns instead of 40. (What a stupid default, gigantic Commodore-64-like text!) It would also be nice if the Login screen could be set to the resolution that I want.
In previous releases, there were ways to do this. In 9.10, I haven't been able to figure out how.
Is there a document explaining all of the radical changes?
9.10 has no menu.lst file and hitting ESC to does not bring up the grub menu. How can we set bootup options or boot an alternate kernel? I would really like to set the resolution at boot time so that my console (Ctrl-Alt-F5, for example) has 80 columns instead of 40. (What a stupid default, gigantic Commodore-64-like text!) It would also be nice if the Login screen could be set to the resolution that I want. In previous releases, there were ways to do this. In 9.10, I haven't been able to figure out how.
View 1 Replies View RelatedI've finished the installation of Debian Squeeze using Installer loader from Windows. But the Installer menu is still appear on Windows Boot Manager.
I've try to uninstall the "Installer Loader" from Windows and I got an error message about BCDEDIT (if I'm not wrong), during uninstallation process.
I ignore it, and continue the uninstallation process until complete. But, After I reboot my computer, the Installer menu is still appear on Windows Boot Manager.
I'm using Windows Vista Business SP2.
I installed F14 from my usb according to the wiki page using unetbootin. The usb boots perfectly and i get a working F14 system. I partitioned my HD with gparted and got a /,/home and swap partition, then used the installer to install the system using them. The installer finishes without a problem and ask me to reboot. When I reboot , there is a blank black screen. No grub menu , no fedora loading. I reboot with the usb and the partitions are full with the files from F14 , there is no xorg.log in the /var/log/ so f14 doesn't even start so the problem seems to be with grub.
I check the grub.conf in /boot/ , i set the timeout to 5 secs , i check that the kernel is using nomodeset (according to this wiki page there is a problem with ati), xorg.conf is using vesa as a driver and I reinstall grub with grub-install with no problems.My notebook is a acer aspire 5552 , i don't think is a hardware problem because I've used arch and opensuse with no problems in it. Fedora seems a nice distro , but this error is preventing me from using it.
i am using the global menu applet on ubuntu desktop edition. almost all of the apps shows its main menu on the global menu applet, but lyx doesn't. am i the only one experiencing this problem? i am using updated maverick.
View 2 Replies View RelatedI had Windows 7 x64 installed, and then installed Ubuntu 10 from the LiveCD. I can now boot into Ubuntu just fine, but I never get the Grub menu that allows me to choose to boot into Windows. I already tried 'sudo update-grub2', which gave no errors but didn't work either.
View 3 Replies View RelatedNetbeans menu doesn't go on global menu. It stays in application. Well, OK, I can live with thatAfter dragging anyting inside Netbeans (windows, menus, ETC), Unity Launcher stops dodging windows and autohiding. It just sits on the screen. It starts to behave normally only after I restart Netbeans. Now- that's pretty annoying.EDIT: Even worse: If I exit Netbeans during debugging session, I must exit Firefox as well before launcher starts behaving normally again. Now, that's entirely unacceptable. Good enough reason to remain on "Ubuntu Classic" (what's left of Gnome that is), and eventually switch do different distro or even... ungh... WAMP.
View 5 Replies View RelatedI have a MSI a6000 Laptop (that has given me a lot of problems installing Ubuntu.
I finally had to run Ubuntu from a CD in nomodeset
Then when I go to install Ubuntu the only options it gives (regarding my harddrive) are to format my whole hardrive or do the partitioning. I have seen screenshots though where there is a third option on the same page to install ubuntu alongside a prior OS and dual boot.
Does anyone know why the "install alongside a prior OS (dual boot)" option doesn't show up?
I installed Ubuntu 11.04 from a downloaded CD onto an old computer. It replaced the old Windows that was on it (that is what a wanted). The machine is a AMD-64, I think the video is a Radeon.When I reboot it only gives meubuntu login: I give the name, and then the password, and what I get is the following:gilles@ubuntu:`$How do I get my Ubuntu desktop?
I have already downloaded and installed the latest version of Adobe Flashplayer...
Quote:
But flash still doesn't work - there is no flash plugin in Firefox plugin list also.
I've tried to close-open Firefox, log out-log in, reboot - nothing.
OS Fedora 11 x64. I don't know, what am I doing wrong?
I'm trying to install F11 on a machine that was running well under F10 just a few hours ago. I made some changes to the disk configuration, involving the addition of a dmraid-controllable fakeRAID card (SiL 3124 I think) and creating a RAID 0 array out of the two drives connected to the motherboard itself (Intel ICH7R). Otherwise the machine's configuration is identical to the way it was when running F10. My problem is thus: when I boot from the installation DVD (64-bit), the boot process doesn't make it even to anaconda. Here is the error I get, right after md devices are autoconfigured:
[code]....
After installing 8.04 (from the "Ubuntu Unleashed" book), the login and pasword dialogs come up but they keep reappearing. The menu options are not available at the top-left. The only thing available is the bottom-left options to shutdown, change sessions, etc...When I Ctrl-Alt-F1, I can see that my login name and password are valid.I've read (somewhere) that the display configuration is very important. This makes me speculate my menu is somewhere off of the monitor. Maybe? Is there some means of booting to a basic configuration mode like the "safe mode" in a different and popular OS?
View 3 Replies View RelatedI would love to change the boot order on my laptop. Mainly because it is shared, and I am the only one who uses Ubuntu (version 9.10)... So everyone keeps moaning for me to change it!
Following all the sound advice from this forum it looks easy... Except /boot/grub/menu.lst does not exist!
single hdd
/dev/sda1 = 100mb Windows7 boot part
/dev/sda2 = Windows7 part ( encrypted w/ Truecrypt)
/dev/sda5 = /boot Ubuntu 10.04
/dev/sda6 = / Ubuntu 10.04
Truecrypt bootloader is in the MBR
The Truecrypt bootloader will boot other loaders if esc is hit, I can choose to boot /dev/sda5 and grub loads, but no menu is displayed, all I get is a GRUB> cli. I've reinstalled Grub to /dev/sda5 using the chroot method outlined in the Grub2 info page on this site, but it always results in the same outcome of ending up in the Grub cli. I can chroot that install and attempt a update-grub, but all i get is "cannot find list of partitions!" attached is the boot_info_script results.
I've just installed Ubuntu 10.10 Netbook edition on a brand new Packard Bell Dot S2 netbook, and when the system rebooted after installation the netbook booted straight into Windows 7.
When I rebooted again and paid more attention to the boot process, there was no GRUB menu (like the one I get when booting up my desktop).
The Windows partition has been resized, but I can't seem to get to the new Ubuntu partition.
Once upon a time I had Maverick Meerkat installed on two drives. Now I've used Disk Utility's "Format Drive" to erase it and remove the Master Boot Record partitioning on one of them. Yet I still have to go through the GRUB menu each time I start up my computer, as if there are multiple bootable drives. I've read that 'sudo grub-install /dev/sdb' might work, but that only seems to reset the bootloader, not remove it.
View 5 Replies View RelatedI have an external USB drive with Mint9 Fluxbox installed on it. At one point, I wiped the drive and set it up using GPT instead of MFT, then partitioned the drive in GParted and installed the OS.
This setup was working fine, but now I have a new laptop, and the OS won't boot. I just saw the errors, "No such partition: UUID=xxx", "Could not find kernel, hit any key to continue". So I attempted to reinstall GRUB via terminal, but saw errors saying that GPT requires a grub_bios partition. So I made a 1mb partition at the end of the drive, (the only unallocated space without moving anything) and selected the grub_bios flag.
I was then able to reinstall Grub without incident, rebooted, selected the USB drive to boot first in bios, but still no Grub menu!?! It just boots from the next device in the bios list.
I'm currently using Crunchbang on a USB stick, which is where I'm running terminal commands from. I want to be able to boot from my external drive on any computer.
I just restored my Windows partition from SFS so at least it's read by boot info. It says it's booting the Windows partition but it always boots straight into Ubuntu with no GRUB menu at all. Heres my boot info...
[Code].....
When installed everything is OK until approx 10 secs after log in and the desktop freezes, whether I run in Ubuntu or classic modes.having installed and re installed about 6 times now, with the same result have tried running in recovery mode - and found that if I choose Run in Failsafe graphic mode "failsafeX" in the Revovery Menu, then the system runs perfectly in Classic mode.Is there a set of commands that I can use in the terminal that will set the machine to run in FailsafeX mode rather than having to start via the Recovery Mode?
View 3 Replies View RelatedI installed Xubuntu 9.10 with Wubi and it worked fine until a recent kernel update broke my install. I uninstalled through Windows and reinstalled Xubuntu 9.10 with Wubi with no apparent problems.When I look in C:ubuntudisks, root.disk, swap.disk, and the boot folder are both present. The C:ubuntudisksootgrub folder is empty; I don't know whether or not it should be that way.But when my computer starts, it just boots Windows Vista without displaying the menu asking me to select my OS.
View 3 Replies View RelatedI am a n00b to Ubuntu, been using it under dual boot with Windoze for about a year, and have found this forum to be a great help - so I am hoping someone can help me out with this "mystery".I wanted to try out the Kubuntu live CD in order to see if I'd like KDE interface better (I used some SuSE 11.2 lately and liked it).I did whatever I do with Ubuntu (under my Win7 environment) - downloaded the iso (x64)- burned it to a CD usinf imgBurner- checked the CD - seemed active enough, Windows installer popped up- rebooted the computerI got the usual language menu, chose English, got the usual "Try kubuntu without...", "install kubuntu"... menu and hit enter to Try and... nothing!? Every option I clicked responded with "nothing" except F keys, and "Boot from first hard disk".I tried a bunch of things - burning with CDBurnerXP, using it on another computer, downloading an iso from a different mirror
View 6 Replies View Related
