Ubuntu Installation :: 11.04 Will Only Run From Recovery Menu?
May 3, 2011
When installed everything is OK until approx 10 secs after log in and the desktop freezes, whether I run in Ubuntu or classic modes.having installed and re installed about 6 times now, with the same result have tried running in recovery mode - and found that if I choose Run in Failsafe graphic mode "failsafeX" in the Revovery Menu, then the system runs perfectly in Classic mode.Is there a set of commands that I can use in the terminal that will set the machine to run in FailsafeX mode rather than having to start via the Recovery Mode?
I've got a, as it seems to me, strange problem.I've inadvertently deleted my user from the group admin so I'm in the same situation of a lot of other users (read a lot of messages about it).My problem is that when restarted in recovery mode there is no way I can choose the 'drop to the root shell' or similar in the menu.The menu appears for a second and then I've got an empty screen. If I press a key I've been requested for a username and password that of course is not what I need.
Setup: 1. Desktop running WinXP 2. Lenovo S10e netbook running Win7RC1 (just expired.) no DVD drive. 3. 1 DVD by Novell and Lenovo with "SUSE Linux Enterprise Desktop 10 (For recovery select Restore System from the initial Menu.) November 2008" 4. 4GB USB drive. Laptop can boot from it.
Problem: Need to install the system to the Laptop using the USB drive. Doesn't install. What I did: Mostly followed the guide at "Installation without CD - openSUSE.htm" my USB drive is G:
used the HP USB Disk storage format tool to make my USB bootable. Copied all files from the dvd to the usb drive Moved G: ooti386loader* to G: Deleted E: isolinux.bin Renamed E: isolinux.cfg to E: syslinux.cfg Downloaded syslinux-3.85.zip from [kernel.org] Extract syslinux-3.85.zip to c: syslinux CD'ed to c: syslinuxwin32 directory in a cmd prompt Ran syslinux -ma E: .....
Result: Runs all the way through, gets to a windowed program called ">>> Linuxrc v3.0.20 (Kernel 2.6.22.5-31-default) <<<" Code: could not find the openSUSE Repository. Activating manual setup program
Main Menu: Settings, System Information, Kernel Modules (Hardware Drivers), Start installation or System, Verify Installation CD-ROM/DVD, Eject CD, Exit or Reboot, Power off Cant find anything on the usb drive (obviously?) so what do I do now?
This is where I'm at and quite stuck... not sure what other flags there are to use, what I have to move around or rename.
I booted Hardy, because Karmic detects no screen, after trying to adjust to a previously recognized resolution. As good as it is, does it seem like some basic computer functions just do NOT improve?
I recently reinstalled Ubuntu 10.04. Since I did that I have had a problem with GRUB: I cannot see the Recovery Mode menu - at least not anything intelligible.
I can see the normal first GRUB menu with all installed operating systems, recovery modes, and MEMTEST, etc, but cannot see the Recovery Mode menu. What I do notice (if I select it) are some fuzzy lines at the top of the screen. I also notice the Ubuntu splash screen does not appear any more either.
Clearly it seems there is a resolution issue. I have a 1440 x 900 monitor and the current version NVIDIA driver.
This happened some time ago on previous Ubuntu releases, but was not an issue when I originally installed 10.04.
Attempted Fix:I installed the StartUp-Manager and have tried all the resolution combinations with no success. Some yield bigger more centrally displayed fuzzy lines, but still nothing legible.
Although this isn't "life-threatening" I'm just a bit worried that I might need the Recovery Menu and not be able to use it.
I started a thread over in installations and upgrades in which I was trying to upgrade from Ubuntu 10.04 to 10.10 using the upgrade manager. My computer froze in the middle of the process, requiring me to restart my computer. When I try rebooting Ubuntu, I get an error message "The configuration defaults for Gnome power manager have not been installed correctly" and then a blank screen. No mouse pointer, no cursor. It will not take me to the Ubuntu desktop screen. I've already found the sudo commands I can run to try and fix Ubuntu. They are as follows:
sudo apt-get clean (If the problem is not having enough free hard drive space) sudo dpkg --configure -a (If the problem deals with the upgrade installation process)
However, what I can't get is the terminal to come up to run these commands. In the other thread I started, someone mentioned that in the Grub menu, you can choose "recovery mode", hit "enter" to boot it, and it will give you a menu of options to choose from. However, when I choose "recovery mode" and hit "enter", I do not get a menu but instead 3 pages of data about my computer that ends with this:
"Begin: Running/scripts/init-bottom... Done. "
It gives me a blinking cursor at the very end but I cannot type anything and I cannot page up to see the 3 pages of data. What I am looking for is a way to get to the recovery mode menu OR somehow open up a terminal so I can run the sudo commands. My computer automatically logs me in, so I do not get a login screen and Ctrl+Alt+F1 does not work for me. Anyone know how I can open a terminal with only access to the Grub menu? Perhaps a BASH command that I can use in the command line that will open up a terminal? To summarize: My computer does not boot Ubuntu. I get an error message followed by a blank screen. It does not go into the desktop screen so I cannot choose Applications->Accessories->Terminal.
My Grub menu consists of Ubuntu and it's version, Ubuntu and it's version with recovery mode, memtest, and Windows XP (I have a dual boot system). In the Grub menu, I can select "e" for edit, "c" for command line and "enter" to boot either regular Ubuntu OS or Ubuntu recovery mode. "Sudo" commands are not recognize if I choose the command line for either Ubuntu OS or recovery mode. I have a Live CD for 10.04 but you cannot run sudo commands because you do not have access to root on the Live CD.
My dad has done something to his comp and it won't boot. it stops on boot up an comes up with some sort of black screen command line. he said its something along the lines of "initramfs" and he can't seem to do anything. We tried booting to the recovery console from the grub menu and gets the same response.
Hes having trouble booting to cd at the moment so I need to know is there some sort of command that will fix or at least give some help that he can type in from this spot.
I dont know if terminal is what im after, but here is my situation: This is a follow up to this thread on not some graphics issues with my linux install: [URL] I have finally managed to get a full install complete, but im still getting this screen on boot (prior to this screen i DO get the kubuntu loading screen) [URL]
So in the GRUB at start i have choosen Linux - recovery mode, to see what options that gave me, and i tried FailSafe mode, but i get an error and it just goes back to the recovery menu. My question is how do i get to the terminal style screen as its too quick for me to see the error, and i cant photograph it as its too fast. i cant see it being an issue with the graphics because of the properly displayed kubuntu loading screen beforehand
New to Ubuntu and trying to ensure I can boot into Acronis Recovery Manager to be able to reimage Windows as and when appropriate. If I enable the Acronis Recovery Manager so that it overwrites the MBR then I run out of ROM I think which prevents it from loading. If I use the software CD that doesn't detect my sata drive. However, I made a rescue CD in Acronis and this does work but I'm only using my bootable CD drive temporarily in this system.I found this post (URL...) which seems to do what I would like and have managed to follow this to extract the files from my rescue CD into /boot/acronis. However this original post relates to Grub and as a newbie to Ubuntu I think I have Grub2. I can't figure out what the correct syntax is to make a new Grub Menu entry in /etc/grub.d/40_custom.
9.10 has no menu.lst file and hitting ESC to does not bring up the grub menu. How can we set bootup options or boot an alternate kernel? I would really like to set the resolution at boot time so that my console (Ctrl-Alt-F5, for example) has 80 columns instead of 40. (What a stupid default, gigantic Commodore-64-like text!) It would also be nice if the Login screen could be set to the resolution that I want.
In previous releases, there were ways to do this. In 9.10, I haven't been able to figure out how.
Is there a document explaining all of the radical changes?
9.10 has no menu.lst file and hitting ESC to does not bring up the grub menu. How can we set bootup options or boot an alternate kernel? I would really like to set the resolution at boot time so that my console (Ctrl-Alt-F5, for example) has 80 columns instead of 40. (What a stupid default, gigantic Commodore-64-like text!) It would also be nice if the Login screen could be set to the resolution that I want. In previous releases, there were ways to do this. In 9.10, I haven't been able to figure out how.
Upgrading over the weekend, but it failed, and suggested running dpkg-reconfigure -a
I couldn't launch any terminal/xterm windows, and couldn't login via ssh (kicked me out with xmalloc failure) or through a virtual console (showed garbled characters)
So I had to reboot.
Now the boot process -- I've tried recovery mode for all othe kernels I've got installed, but all fail in the same way:
I have a new (for me) computer (Its a Dell Dimension 9200) that I have put my hdd in with its Ubuntu install. The hdd works just fine when booted in my kpc shuttle but does not boot properly in the Dell. I can get a grub menu when I pull the power cord and then reboot. If I select recovery mode, I can get a graphical desktop with the failsafe graphics options or a command line. When I reboot after recovery mode, I do not get a grub menu (even if I press shift during boot) and all I get is a black screen with a blinking cursor. The monitors then go blank and act like they are no longer connected to the computer.
I've just installed Ubuntu 10.04 alongside Win XP. I can boot into both fine. However, I no longer see the Win XP boot menu that allowed me to go into the Windows Recovery Console if I needed it. Previously with Ubuntu 8 & 9 this was briefly available after selecting the Win XP option from the grub menu, but not any more. How do I get it back?
Want to add Ubuntu + Swap in the 90 or so GB range, fairly new to partitioning. Trying to create recovery disks using system tools is over 16 Gb, for that kind of expense I may as well just order recovery disks OEM if (When) Windows falls apart.
I installed Ubuntu 10.04 32 bit on an Acer Aspire 7520 laptop running Vista.Thereafter, Vista could only be run via the "Windows Recovery Environment" grub menu option, which is on /dev/sda2. However, within Vista than the wireless network is not functioning any more. It has given lot of headaches to find a way out. Unsuccessful, so far.
After upgrading to 9.10 Karmic Koala, my Amilo Laptop (AMD64) refuses to boot. I installed GRUB2 which works fine for my WinXP ... and Karmic will boot in recovery mode.
When trying a normal boot, I get a black screen. CRTL-ALT-F1 yields just a blinking cursor. The system will immediately reboot when pressing CRTL-ALT-Entf.
When booting in recovery mode, I choose "Resume normal boot" from the menu, log in while in cosole mode and enter "startx" ... and the grafic environtment works fine!
Why does the system work in recovery mode, but does not start with a normal boot?
Fly.By.Wire
Here's some information on my system:
cat /proc/version
Linux version 2.6.31-17-generic (buildd@crested) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu ) #54-Ubuntu SMP Thu Dec 10 17:01:44 UTC 2009
This morning, i want to install ubuntu 9.10 and want to upgrade to 10.04. Im using live CD and while install, i go to advance partition and resize the windows partition and after i resize the partition i saw my windows partition has lost.Here the details:Windows XP size: 80gb and free size 35gbi want to use my ubuntu size around 10gb, after i resize to 10gb and format etx4 as root my windows partition has gone. how to recovery and revert my windows partition back?
I am trying to install ubuntu 10.04. I had ubuntu 10.10 but I want to install 10.04 (32 bit) because 10.10 is slow. Problems with cd drive/cd caused installation to be incomplete so system cannot reboot at all.
I just tried the "Try Ubuntu without installing" option and got Gnu Grub Version 1.98+20100804-5ubuntu3 Ubuntu, with Linux 2.6.35-25-generic Ubuntu, with Linux 2.6.35-25-generic (recovery mode) Ubuntu, with Linux 2.6.35-24-generic Ubuntu, with Linux 2.6.35-24-generic (recovery mode) Ubuntu, with Linux 2.6.35-22-generic Ubuntu, with Linux 2.6.35-22-generic (recovery mode) Memory test (memtest86+) Memory test (memtes86+, serial console 115200)
Which should I select? and what do I do to go on to install/reinstall 10.04?
can't understand the whole /dev/sda stuffs ntfs limitation etc.Now my question is, how do i install properly ubuntu w/o killing the f9 recovery mode of eeepc. Cuz incase i want to revert back to windows i can just hit F9 at start up.I want to use the 1st partition as my ubuntu OS then second partition as my extra storage. But i dont know how to set it properly.Should i first change the SDA2 from ntfs to ext3 or 4? or fat 32 file system?then click install now to sda1 ntfsto install the linux and delete the windows xp?What is the Swap part in the partition? do i need it?if i convert the sda2 to ext3 will it still be just the same as fat32?
Firstlyi want to specify that i read many threads and guides before posting this, tried to follow some advice and solutions but nothing worked (but I am a beginner user, and maybe i did something wrong!)My laptop is a Lenovo SL410 (i bought it in China) which came with pre-installed Windows Vista.I had many trouble with resizing the partition in order to make room for Ubuntu but i finally managed. I successfully installed Ubuntu 10.04 and everything works fine.My problem is that Grub shows"Windows Recovery Environment (loader) (on /dev/sda1)" instead of normal Windows Vista (which is on /dev/sda2)If i choose Windows Recovery Env. i can load Vista but is not stable, keeps crashing, or giving me warning about low memory
I'm about to install Ubuntu Netbook Remix and my Acer machine has a recovery partition at the beginning of the drive. I've created the eRecovery discs but those will only restore XP - not the actual recovery partition (which I'd like to have in case I sell the laptop later etc).
How can I backup the actual recovery partition, and keep its boot file intact. Then how can I restore this partition at a later time?
I have just bought a new computer and I want to partition it to be dual booting as I have done a few times in the past.
Currently (alternatively, see attached screenshot):
There are three partitions: /dev/sda1: FAT16 DellUtility (takes very little space and is of no concern) /dev/sda2: ntfs RECOVERY (takes up 17.58GB and is marked boot) /dev/sda3: ntfs OS (the rest of the computer, on which windows is currently installed)
[Code].....
it is safe to delete the current boot partition. I am also not quite clear on when the recovery partition would be used and whether it is really all that necessary (18GB doing nothing seems like a lot to me). Should I make a system recovery media for windows before repartitioning? Also, I am not sure which type of ext partition to use. Finally, I am not sure how big to make the swap space. I think I recall the normal rule being twice the RAM (6GB RAM in my case), but 12GB swap space seems like a lot. Although I do sometimes run memory intensive programs (simulations for research). I normally use other computers for such simulations since they have far more RAM than my computer can possibly have even with a large swap space.
I have an issue with my keyboard not being picked up in Ubuntu and I went to go ahead and boot into the factory recovery partition to start from scratch, but after it gives me a ramdisk loading bar, then goes to a black screen with a mouse like the recovery will start, then the computer just restarts. Now, I can boot into Ubuntu (but no keyboard) and boot into XP (as I am now) but I can't get the recovery partition to boot.My current station is out in timbuctu, so I am awaiting the arrival of a flash drive to load a LiveCD onto to use Gparted for any potential solutions.
I was installing 10.10 x64 today. I wanted to manually partition the disks, since I have a /home partition from a 9.10 installation which I want to keep.Unfortunately, I selected to convert the ext3 /home partition to ext4 and didn't realise it was formatting the partition until it had just begun. In desperation, I pulled the power plug, but now I can't access the partition (using the LiveCD) - comes with an input/output error.What are some strategies to recover the data on the partly formatted partition? I don't think much, if any, was actually formatted.
It's my first time i switched to linux (fedora13) and i wanted to check out ubuntu10. Started installation but somehow (stupid!) selected not the right harddrive to install new system from an iso dvd. Well installation was not successfull, because not the right drive was selected.I came back to fedora but my "storage" harddrive that i had all my collected data and projects is lost. Basically it's like new formated and some files from the ubuntu 10 are on it. None of my files. Is there any way to recover it back? I don't even have a clue how do you install software to fedora13?(I'm a newbee that was sick and tired using and upgrading windows - so now mac OZ and linux)
I have a laptop which was originally running Windows Vista, I attempted to install Windows XP on via USB since the laptop couldn't boot the install disk (this has turned out to be a bad disk drive. This fell flat on its back and wouldn't even finish the install (although not before formating the Vista install in to oblivion). Although I was extremely careful to leave the Vista recovery intact. So I managed to get Ubuntu 8.10 (XFCE if that makes any difference) installed over USB. I was wondering, Could I use the GRUB louder to boot into the recovery drive? Laptop is a Toshiba Equium L350D
