Ubuntu Installation :: Backup Of System?
May 29, 2010
I have been using Ubuntu for a while now though not heavily. I want to try out the new 10.04 as I was not all that happy with 9.10. I would like to backup my entire Ubuntu System so if the upgrade goes south like it probably will and has every time in the past that I can restore it easily. Now in Windows I would use either Paragon Backup or Comodo Backup. So, I was wondering if there is a complete backup system like this for Linux. I have looked at several, but most only back up the home directory or specific directories.
View 2 Replies
ADVERTISEMENT
May 2, 2011
I am trying to restore my system to Ubuntu 10.10, using a system backup made with REMASTERSYS. When I reboot, I get the message: GRUB error:15 I found many threads discussing this issue, most notably here: [URL]
[Code]....
View 7 Replies
View Related
Aug 14, 2010
I would like to find out how to back up a complete Ubuntu system, and then restore it on a clean harddisk.I have been running dual booting with Win XP until now. I am running Ubuntu 10.04, but have installed quite few add-on. I would like to make an Ubuntu-only machine now, with all the same apps still there, but dont want to go and download everything again. I am looking for a way I can back this entire Ubuntu installation up, and then restore it to a clean drive.
View 2 Replies
View Related
Feb 5, 2011
I am thinking about upgrading to 64bit Ubuntu 10.10 because I have heard it's good for gaming and makes things run smoother. Also, I know it's the new thing and I'm going to have to switch eventually. Point is I don't want to loose my data with the clean install and I was wondering if I backup my current system, which is 32bit (assuming there is a backup utility, I thought I saw one) will I be able to load that on my new 64bit install?
View 8 Replies
View Related
Feb 2, 2010
I have a question about ext4,remastersys backup : I have upgraded from 9.04 to 9.10 via the upgrade button in synaptics, so it means that the files system was not touched, which means that my system is still ext3 as it was when I installed the 9.04. I can make a backup of my system as it is configured right now (that's how i like it) using remastersys.
Can I install my system backup into my machine after formating it into ext4 or when I create a backup using remastersys it must stay in the files system as it was when it was backed up? The issue is that right now the 9.10 responds from some reason a little bit slower than my 9.04 responded (to everything e.g. open/close windows etc...) and I read in the forum that ext4 makes 9.10 run faster.
View 1 Replies
View Related
Jan 25, 2011
Recently I've backupped my entire /home folder on my laptop with grsynch trough ssh.Since I already had a simply text file containing all installed programs, I figured 'then, when i go from the backup trough my desktop, all my program settings will be restored if i run the txt file to install all those programs first.So i installed al programs, then i went from backup to /home on desktop, logged out and back in. Started up a random program (tried thunderbird and filezilla) and no settings were to be found.In retrospect, docky did start, but didnt have all the launchers i had on my laptop. so that could have been a clue.
View 4 Replies
View Related
Oct 7, 2010
At work we have a linux based ip phone system. Now this system was buggy for a bit but we now have it working perfectly. As it is we clone this hard drive and on backup I clone it back. This works but if for whatever I'm not in the office the backup can't go through because apparently no one can read the VERY simple instructions. What i would like to do is burn a cd with a copy of the hard drive (this configuration will change once every 6-12 months at maximum) as well as a VERY minimal linux install.
The goal is they stick the cd in and reboot. The system loads the super minimal linux then it runs a batch file that clones the portion of the CD that has the hard drive onto the system then it asks the nice moron....err....person...to remove the cd and reboot All I need is a a bootable system to a bash script that will run live from cd. I can make the nice bash script that puts to the screen a nice ascii graphic telling the lucky sap it's running and to come back in a little bit to make sure it's done.
View 4 Replies
View Related
Jan 3, 2010
How can I work your backup to Linux system without Windows
View 8 Replies
View Related
May 9, 2010
easy way to backup everything the system with its settings. I have seen many posts regarding this on google and in this forum but it was a bit hard for me.[URL]...
View 2 Replies
View Related
Jul 15, 2010
I have an external hard drive and have been using it to backup my multiple computers for a while now, but because it needs to be plugged into the mains, it is a pain to move it from one computer to the next. So I've decided to try to set up a SSH backup system that will allow me to backup without having to move the drive.
Host udev script:
Code:
View 5 Replies
View Related
Aug 11, 2010
I would like to reinstall my whole 10.04 system, because I feel, that it is pretty massed up, as a beginner I also made some mistakes and there are some unnecessary errors.
I would like to mostly keep my installed apps and settings. Is there any way to recover/export them? home folder?
View 2 Replies
View Related
Sep 9, 2010
I removed windows completely from my Dell Inspiron N5010 and installed Ubuntu 10.04.1 64bit. In windows I have the option to create the system image of system's current state so that if something goes wrong I could easily restore my system using that image( I am not talking about windows Restore facility). I wanted to know that if there is something available in Ubuntu also. I cant use Dell recovery media creator as I have deleted recovery partition. I have already used Remastersys and it also did its job well but after restoring my Graphics card driver did not work well.
View 4 Replies
View Related
Apr 19, 2011
Custdistro means it will backup your all/thing without/home and customback means it will backup all thing in /. It can create an ISO if your backup is less then 4 GB. Well, i've made a lot of changes to ubuntu 10.04 and now i love it! It does everything i'll want from any computer. This took me a lot of time, follow several tutorials and destroy the entire system a couple of times. The last one is a BIG problem because restoring my system to the state before i ****** all up takes some time again.Do any of you guys know how to backup all my system settings, programs and files? So that if i corrupt my system again i can restore it to be exactly as my current state?
View 9 Replies
View Related
May 27, 2011
I am relatively new to Linux, What files/Folders should be backed up and what ones are not necessary?This is my 2nd install of 11.04 because I screwed the 1st one, so Im not sure what to backup to prevent having to reinstall if I screw up again.
View 9 Replies
View Related
Feb 13, 2010
I have ubuntu 8.4 can i backup or clone the system daily using ssh ??
View 3 Replies
View Related
Mar 2, 2010
I am new Ubuntu. I have a new Dell Mini10 running that I have configured and running. I want to clone or backup the system at it's current state. I have been looking at the options and Clonezilla seems to be recommended often. Are there other choices that are easer or better? My real goal is to make a bootable DVD that will restore my system back to the point it was cloned.
View 2 Replies
View Related
Jul 3, 2010
basically want i want to do is copy my whole file system to a different hard drive, then reconfigure my partitions and copy it back. then reconfigure grub.
the reason i want to do this is when on dual boot i gave it only 70gb of space and now i want to add 300 more. and since the 300gb of space is a primary partition and this is a secondary i cant extend them or combine them.
so what i want to do is. sudo cp -rP / /home/me/sshfs-folder
also i have raid 0
View 6 Replies
View Related
Oct 1, 2010
I just moved to Ubuntu. I have been configuring and installing applications so I can finally call this OS my new home. Still not there yet but have been doing alot of work on it. I was originally with Windows XP. I am a back up freak. I backed up my documents, firefox bookmarks and other important information every 5 mins to another drive when I was using Windows XP. Also, every 24 hours I would have this program Acronis True Image back up the whole Windows partitiong (Drive C). This was so if my hard disk died, I know I could restore the partition from an image and only lose the last 24 hours of configurations/modifications made to the OS.
And for personal data such as bookmarks, messenger chat logs, documents, pictures etc, I would only lose the last 5 minutes of this data, since it was always backed up every 5mins. It was very fast too.
So my question is: 1. Whats the best application to save a whole image of the Ubuntu partition so that it can be restored with minimal (hopefully only 24 hours) of data loss?
2. Whats the best application to save selected directories and have it configured such that those directories are backed up periodically?
3. Whats the best application to do Number 2 (above question) with versioning? That is, if it is backing up periodically, it will save file changes, so we can revert back to an older version of a file.
I have tried SimpleBackUp suggested by the Ubuntu site and did not like it at all. It just said it would run in the background and you couldnt even cancel it or monitor it!
View 9 Replies
View Related
Dec 25, 2009
I am planning to implement a backup strategy to backup my basic system ,applications installed and the different configurations also of the personal data (From documents , music etc , to my photos , 3d design files etc) I have a Hard disk (well SSD really) of 120GB for the system (8GB Swap,30GB / and 60GB /home), one 750GB Hdd for save my music,photos,images and other things not related to 3d design , and i am going to buy tomorrow 2 hdds more , one of 1 TB for use only for 3D design , for save final images , models , textures , 3d related documentation and like , and one 1,5 TB HDD to use as backup of the personal data and the system. (One 500 Gb partition for backup system, and hold clonezilla images, and one for backup the data for example)
By the moment what i have done , is use clonezilla to save a image of / and another image of /home in my other hard disk (I save a image of system installation in ext3 prior migrate to XFS , and later , one image with the system migrated to XFS) and i have used Rsync to copy both / and /home to two partitions in the other hard disk , so have a copy also of clonezilla images. I think use clonezilla ,is useful to do each some time,so be able to have a fast way of recover the system , but i would like to implement a daily or weekly backup of my data and system , for example making a full backup and then incremental backups.
Perhaps for backup data this is a good aproach , but for backup configuration files , and the system in general ? , i mean , if i backup the things while using the system , could some files being not backuped , because being used ?
If i decide to install,for example, my new Wacom Intuos4 M tablet, for that i need to install the kernel source , and compile some modules and things by hand (because repository packages of wacom are a bit older than need for new intuos4) ,that will change my system and add new libraries and files to it.
If i make a full backup , and then incremental backups , each some time , if i have a problem or make a mistake when installing it or doing something , i have only to restore the backups via live cd, no ?
But if some files are being used , that, will not be backuped, so when restore it , that files , will be modern versions compared to the backup (perhaps that files would not be later modified , but who knows) and i could have problems no ? Perhaps a solution is have a clonezilla image of the system prior the first full backup ,and restore it fist to have a new installation ,with all files , used included, and then restore the full backup of the 1h later ,and the incremental backups until the moment all gone bad , to have the system working again no ?
So i don't have to be worried by files used by the system as long as also of doing online backups , also have a exact image of my system , that will make me able to restore it in some minutes and don't have to install all , by hand and remember what i had installed. Also that lets me to backup only , at least when doing full and incremental backups , the directories of the system that are dynamic, and change , and those that are static , backup them only one time.
View 2 Replies
View Related
Mar 1, 2010
I have a personal ubuntu server that provides apache, glassfish, firewall, routing, email, CVS, MySQL, etc.... This server has been running for a while with two hard drives configured into a RAID 1 array. The array has two partitions, one for swap and one for the data. I currently back up the data with a removable hard drive. I use dd and create an image of one drive and the MBRs (partition tables) of each drive.In a disaster situation I can use this data to recreate one drive and then re mirror it to the second, or just boot the back up.I like this solution because I can easily recover from bare metal, and the backup is transparent. I can browser it if needed since its an uncompressed image of the drive. The one drawback is that I need to reboot the system with a linux CD to do the backup.
My hard drive space is almost at capacity. So what I want to do is add a third drive to the array and migrate it to RAID 5. However this will cause my current backup method to no longer work. How can I back up this RAID 5 array. I need to back up the entire system, and not just the data. I have made many tweaks to the system over the years that it has been running that I can't lose if a restore is needed. I have seen a large thread here that people have been using tar. My concern with tar is how do you use a tar archive to restore a system to a new array. Im assuming that you would need to setup the array and then just restore the archive? Also, i don't have much faith in using tar on a running system. Doesn't this open yourself up to corrupted backups? My second idea is using rsync. While I consider myself experienced in linux from 10 years of personal and professions use, I have not had much experience with this utility. Would rsync provide a more reliable way to backup a running system that would enable a bare metal restore later? I once read something about people using rsync with hard links to create a backup that could store many incremental backups.My main concern with both rsync and tar is not being able to restore the OS to the state that it was in at the time of the backup.
View 4 Replies
View Related
May 5, 2010
I want to be able to recover from a disaster by simply inserting a CD of my entire system, boot from it, and reinstall my system back to the way it was before the disaster. After much research here, I feel the need to ask this question directlybut as a new user, I find it somewhat difficult locating information.
I have seen references to all sorts of backup software. I am trying to use Simple ackup.Each time I run this utility, it gives me a process ID and then apparently vanishes. I don't see the process running in System Monitoror see anything recognizable in var/backups.Perhaps, being as new to Linux as I am, I am simply overlooking something. I must say though, that these are the friendliest user groups I have ever seen. It amazes me that so many people are so willing to post long, complicated solutions to someones problem
View 8 Replies
View Related
Jun 14, 2010
best/simplest way to back up my triple-boot machine, which has Karmic 32-bit, Karmic 64-bit and Windows 7 (64-bit) installed on 3 equal slices of the internal 1TB disk. There are a total of 6 partitions (1 primary+1 logical partition each for the two Karmic, and 2 primary partitions for Win7), and I would like to back it up on an external disk such that the whole system can be restored as-is by writing over the disk. I guess this means correctly backing up data+partition table+MBR, and I would also prefer backing up only the used portion of the disk (rather than creating a 1TB mostly empty image file).
To my knowledge the only way to reliably do this is with "dd" command, but I have never used it ("fsarchiver" seems to be the next best option, but it cannot back up MBR yet; and "partimage" does not have ext4 support). As described here and here, I should run the following commands from a live boot:
1) To back up entire data in compressed format (using 1MB read block to speed up the process):
dd if=/dev/sda bs=1MB | gzip > /backup/image.gz
2) To back up MBR+partition table (stored within the first 512 bytes of the disk):
dd if=/dev/sda bs=512 count=1 of=/backup/image.mbr
3) To restore data:
gzip -dc /backup/image.gz | dd of=/dev/sda
4) To restore MBR+partition table:
dd if=/backup/image.mbr of=/dev/sda
View 8 Replies
View Related
Oct 12, 2010
I currently have an Ubuntu 10.04 Server with 10 2TB hard drives (Hot Swappable). I discovered that having a software raid over 16TB is not supported, so I split the drives into 2 sections and have 2 Software Raid arrays storing my movies, audio, pictures, and other software. The total current usage is around 7TB.
Since backing the files up to DVDs or even BlueRay is laughable, I am going to backup the system to 2TB hard drives probably 4 of them, the problem becomes that I can only hook one backup drive at a time into the system using a hot swap tray. Now I know that I can do this manually by copying the files one at a time to the drive until it is full, switching the drive out and repeating this, but I am hoping for an automated solution, Start backup, plug first drive in, system fills up drive, swap and repeat. Also it would be nice if the system remembered what had already been backed up so when I add files to the system, I only need to attach the last drive and not start the process over.
View 3 Replies
View Related
Dec 7, 2010
Every time I install ubuntu I have to reinstall all the software from the software center and so. Now I already installed all software I need for this moment. Is there a way to take source files of those (installed) packages and save them some where else in order to reinstall them if i needed next time without need to INTERNET connection ???
Another question I wanna know about: How can I take a backup of my system as whole in order to get back to it if some problem happened. I used to use Acronis True Image and its alternatives to make a disk image. Is there is some thing similar in linux ?? is there better options ??
View 4 Replies
View Related
May 2, 2011
System76 laptop, 10.04, 320GB HDD, VMware with Win7 in one VM; want to use Clonezilla as am using it to back up (bare metal backup image) another older smaller dual-boot Ubuntu/XP machine. This System76 laptop is a work machine that I control; the Win7 VM only does a couple of things but they're necessary for work and I don't want to lose the configuration. The reason for the bare metal backup is so if I have to, I can restore and get back to work - something I've had to do on some previous occasions back when I used Windows. Data is no problem - I back that up separately on an hourly basis.
My question is what FS to use on the backup drive; for instance, for the dual-boot XP/Linux work machine I'm currently backing up, I'm using a 30GB external HDD formatted in FAT32. That's OK because 30GB is below the limit for FAT32. But for the newer laptop I'll need a much bigger backup partition. I chose FAT32 for the old one because I know everything on the computer being backed up, Windows & Linux both, is compatible with it. But what FS should I use to back up the new laptop, considering that I'll be backing up the Win7 VM as well as the main Linux part of the machine? I plan to use a backup partition of about 160GB. Could I format it NTFS and have it work with Ubuntu 10.04? Or, conversely, if I format it EXT, will it back up the Win7 VM OK?
View 1 Replies
View Related
Jul 31, 2011
Well I've decided to move all my data from one VPS to another, and Iwanted to know if there was a way from within Ubuntu to make a full system image backup,ch I can then just transfer to the new Ubuntu VPS, and restore it there ..Unfortunately my VPS control does not have any working backup option right now, so I can only make the backup manually from within Ubuntu, if there is a way to do it
View 9 Replies
View Related
Jan 21, 2010
im trying to clone my ubuntu system installed in a laptop in case the laptop crashes.
But, first of all: when i try to restore the system in a new PC, could be incompatibilities because the hardware of the broken laptop and the new laptop is different?
I dont mind if i have to buy another laptop with the same processor type (i386, etc), but, for example, the type of the RAM could be cause of problems?
View 7 Replies
View Related
Feb 9, 2010
Basically, I want to write to the DVD, much like tar would write to a tape. Backup to tape example:
Code:
sudo nice tar -jcvpf /dev/st0 / --exclude=/some-random-backup-dir --exclude=/proc --exclude=/lost+found --exclude=/sys --exclude=/mnt --exclude=/media --exclude=/tmp
View 3 Replies
View Related
Jul 22, 2010
I'm trying to create backup/archive my Ubuntu 10.04 system files (so I can restore it in case my system get corrupted). More specifically, I'm trying to zip the important files in my root directory not including my home directory (which includes my documents which I backup separately/more frequently) to an external hard drive attached via USB (called 'My Book').
Since File Roller didn't give me quite the level of control I was looking for, I created a script that I could execute to backup and archive regularly. Here's a snippet:
cd /media/"My Book"/"Linux Backups"
NOW=$(date +"%b-%d-%y")
LOGFILE=Backup_Root_FileSystem-$NOW.log
sudo zip -r -T -v Backup_Root_FileSystem-$NOW / -x /media/'My Book'* /media* /proc* /sys* /mnt* /dev* /cdrom* /home* /'lost+found'* | tee -a $LOGFILE
[Code]...
View 5 Replies
View Related
Jan 17, 2010
I have read that i can backup the entire system with the home folder with commands, or with programs, such as clonezilla, but it doesnt work, so im trying to back it up with commands now but i cant find a good tutorial to explain what commands to use.
View 9 Replies
View Related
