I've been using Ubuntu on all my computers, but for a school project I need to get back to Windows VISTA.Running 10.10 on my netbook, using the desktop edition though.I got a Bootable Vista USB sorted, but I'm having a problem installing from it.I press F2 to enter the boot options and I only have 6 options - 4 Ubuntu options and 2 memory tests.How do I manage to select to boot from the USB?
View 1 Replies
I had win xp and ubuntu in the laptop, but I have to format the xp partition, so now I have a new xp, but I can't see the ubuntu partition that is at the end of the hard drive, I mean to boot selecting between Ubuntu OR XP. What to do?
View 1 Replies View RelatedI am using a dual boot with windows vista, I would rather use ubuntu but my wife wants windows. How do I change my boot order to boot into windows instead of ubuntu? My ubuntu is an upgraded version from 8.? then 9.04 then 9.10
View 7 Replies View Relatedbeen trying to get linux installed on a troublesome laptop for 48 hours now without any luck so thought I'd post here as my last option.
I've tried installing 10.10 desktop, 9.04 netbook remix and just this minute 10.04 netbook versions of ubuntu, as well as other versions of various linux distros.
I woke up this morning and burnt 10.04 netbook to CD (not usb) as I wanted to put it on an old laptop with max resolution of 1024x768. I put it in an external CD drive and it boots up to the options screen on the Live CD, where you can choose to 'try Ubuntu netbook without installing' or 'install ubuntu netbook' etc.
The problem is, I can't click (press enter) on any of the options. The same problem arose with earlier versions, i.e 9.04 netbook remix Ubuntu.
Laptop model: Compaq Presario R3000.
i had a vista/windows 7 dual boot until recently...then i removed windows 7 and installed ubuntu..problem is when grub loads up if i select windows vista it wont boot but if i select windows 7 it will boot into windows vista.
View 6 Replies View Relatedjust installed Fedora 15 on my system alongside Ubuntu 10.10 on My 500 GB hard disk.However on starting the computer the Fedora 15 partition gets loaded automatically. How do I access
my Ubuntu 10.10 partiion? I want to have a choice at start-up which OS to use. On my previous computer when I used to have Windows and Ubuntu,a menu used to appear asking which operating system to load.
I have Windows XP on one drive "C" drive, Windows 7 on another "E" drive and want to install Ubuntu on another drive "G" drive. How do I when installing Ubuntu select the "G" drive to install to?
Then how to select the operating system required from a cold boot?
I was able to install Fedora 10 from the Live KDE CD, however I can't boot it.
I placed it on /dev/hda4 of an IDE disk, while on /dev/hda1 I have a RedHat 9 Linux, /home is on /dev/hda2 and the swap is on /dev/hda3. I'm not sure if RedHat 9 and Fedora 10 can coexist on the same HD.
There's an option in the Live KDE CD boot install, which allows one to select:
boot from hard disk:
Do you know what to type in in order to direct Fedora to boot from /dev/hda4 (who may be /dev/sda4 as seen by Fedora)?
P.S. For the time being, I want to forget about Grub or LILO and see if I can boot it this way first. I have LILO working, it boots Windows from a separate disk and RedHat 9 from /dev/hda1.
I tried to install F12 on my new IDE-HDD. The installation completed without any errors. But, when rebooting my PC I got a dark screen with error message: reboot and select proper boot device.
No BIOS boot up issue, since booting up using other hard disk running windows has no problem at all. I have set the hardisk jumper to master/primary, tried to re-install F12 a couples of time, but didn't make any difference.
I am trying to perform a hard drive installation of RHEL 5.5. I specify the installation method and the partition and directory holding the ISO image in /etc/grub.conf
Code:
However, I am still presented with the "Installation Method" and "Select Partition" screens when anaconda runs. Is the syntax of the repo boot option correct?
So I have the burned ubuntu CD, and I'm attempting to install it on a system that has one HDD with XP/Vista on it, and another that is completely formatted and unpartitioned. However, when I boot to the ubuntu CD, I can use the menus from the bottom, and select the language when initially prompted, but I can't select any of the menu options except for boot from first hard drive.
View 1 Replies View RelatedReboot and select proper boot device or insert boot media in selected boot device and press a key. I got this error after: Reducing my Windows 7 partition by about 100gb. Creating a new partition (100gb) and copying my Ubuntu partition (10gb) to the new partition. After it was copied, and pasted, the original partition was deleted. I now had two partitions a new 100gb Ubuntu partition and a 600gb (or so) Windows 7 partition.
All of this was done using a bootable USB with Ubuntu 10.10 and GParted partition editor. Now when I boot I get the "Reboot and select proper boot device or insert boot media in selected boot device and press a key." error.
I'm used to be a Ubuntu user at first,and using its Grub loader so far.Several moths later,I just find that may be Opensuse is another good choice.So I installed Opensuse 11.3 without grub using KDE Livecd version because it cant find the Ubuntu partition while the install process,but the install application can find Win7 installed in my laptop.Soon I logined to Ubuntu and Updated the grub settings in Ubuntu.This grub program in Ubuntu found that there's a Opensuse 11.3 on a partition. So I can login to SUSE by Ubuntu's Grub.But Now I want to use SUSE its own Grub.So what should I do to change my default Grub Loader from Ubuntu's to SUSE's?
View 9 Replies View RelatedOn my PC, I use GRUB to manage my dual-boot startup on my PC. Every time I update my Linux, It adds another 2 startup options on my HD for every distro I have. (The Normal and Recovery modes for the new version.) I would like to add the VortexBox distro someday.
Is there a way for me to get rid of the older versions of Linux distro's on my GRUB menu so I just see the newest? I have 6 options for Ubuntu 10.10 and 4 options for UGE 2.8..
I'm getting a new HDD today. I have SATA 500GB, and I'm getting SATA II 500gb. This is what I wanted to ask. On my first HDD, I have Windows XP and ubuntu and on the new HDD, I will install Windows 7. What I wanted to ask, are such things like jumpers on my HDD (master/slave etc.) used to select boot order? Or will I have to go into BOOT settings and choose Win7 Hdd first in the boot order etc.?
View 2 Replies View RelatedI want to try installing from a USB drive. I can create a USB start up easy enough. The problem is when I go into my my laptops BIOS and boot order set up there is no option listed to select the USB in the boot order. The "closest" option is "Floppy Diskette" which of course I don't even have!
How to set the USB drive as the first boot option or might it not be possible on this machine?
I have never had a boot-splash screen on my dual-boot configuration; and I recently added something in Synaptic, probably by mistake, that added a Debian splash screen to my boot menu. I think it's much more attractive than the bare menu; however it's not appropriate for an Ubuntu distro. Also, I'd like to know how to add and select boot-splash screens, that will show behind my boot menu, like the Debian screen does.
View 7 Replies View RelatedI've been dual booting Ubuntu and Windows for about a year now. I know that Windows is nasty and all, but game publishers haven't gotten the memo, and Windows 7 isn't that bad. How do I know? I've been using the trial. Except that runs out tomorrow, so I'm going to have to install the full version. Which leads to the problem:
If I install it onto the partition where I had the old install, will grub find it? Will it roach my Ubuntu partition?
If that won't work, it leads to a second problem: The Internet connection on that PC is so awful (for reasons that I'd rather not get involved in here), that I'd rather not, if I have to re-install Ubuntu, download all of the packages I have installed again. Is there a reliable way to back up (and, more importantly, restore) all of the libraries and programs?
Finally, if neither of those options are possible, is there a way to select the packages directly, and download them with a well-connected PC?
I made a USB pen bootable w/ubuntu 10.10 booted the OS in bios chose my language then on the next step I chose to install updates and third party applications. When I pressed next I was just loading (loading mouse icon) and it don't seem to finish, I just let the computer trye to get past the loading by waiting for 30 - 50 min but nothing happend.
Also tried reinstalling the OS on the USB w/UNetbootin both 32/64 bit and10.4 version -> no change PS: when shutting the comp. down while in ubuntu testing mode black screen with errors accure (a lot of different numbers - error) this is increadable enoying!
I'm a long time reader, first time writer. I have a question. I've been trying to do a dual boot with XP Pro SP2 and Ubuntu 9.10. When I setup everything and try to pick which OS I want to load, the GRUB freezes and won't boot/let me select anything else. I have to turn it off and then back on to only select Ubuntu or let the time run out to automatically select Ubuntu. I've got a Compaq Presario 2105 w/80gb HDD, 433.2MiB, and an AMD Athlon XP 1800+ Processor.
View 1 Replies View RelatedI was installed linux mint in windows 7 using option "Install inside windows"... I got trouble with windows7 so i reinstalled it... but now there is no option to select OS at the start up... But i have the drive where i installed mint and all other files.. Is there any way to get it back.. Because i dont have time to reinstall mint...
View 1 Replies View RelatedI try to use fedora 11 as my home server. The server should be remotely managed by VNC. A normal VNC-setup does not allow to log into the login screen, but that is what I need !!
Notice that I would like to maintain the sever using the normal gnome gui. I have been investigating lots of options to get VNC running this way, have been searching all over, but did not find any working solution. All solutions I found where based on XVNC which is not available for fedora 11 as far as I know.
I installed Ubuntu as a dual-boot system with Windows XP very carefully. Unfortunately, though given the option to boot Windows at the grub menu, when I select it, I get an error. Booting Ubuntu on my other partition works just fine, no issues.
I also attempted to access files from the first partition in Ubuntu using gparted, but once I mounted it, all of my files were not present. I only saw manufacturer files, and many files and folders I didn't recognize.
Also, as an aside, my laptop monitor is suffering from occasional black-outs during use. Ubuntu gave me a little toolbar flag, telling me to go to a website and use the patches given to fix it, but I'm not quite so sure where to input the given patch text. Do I really need to go through the trouble of finding the source code, etc., or is it more simple?
I have an arbiter which determines and manages a lab. I am wondering if it's possible to remotely control the grub boot selection. Right now I have to wait for the nodes to boot, check the hostname and then rsync the new grub configuration and reboot the node, it's VERY timely so I am wondering if there is an alternative to this method?
View 2 Replies View RelatedTo clarify: I have two kernels, (a) one that "works" and (b) another that I am experimenting with. Each has it's own modules directory tree (in /lib/modules) and they are mutually incompatible ie kernel (a) will only work with module tree (a) and similarly for (b). I have two boot entries in lilo.conf which can be selected from the boot menu.
Now the problem is, what if something goes wrong when I boot to (b)? I'd like to be able to return to the safe option (a), but the current module tree is (b) and it won't work with kernel (a). I could use the Slack installationCD and rename the module directory (I presume this would work)but is there a simpler way, whereby I can select the correct module tree at boot time (or set it in lilo.conf)?
How do I stop the message asking me to select a vga setting on every boot or press enter or space to see the various settings available? running slackware 13.1 on an aspire one netbook
View 2 Replies View RelatedI would like to install and manage SQUID Proxy Server using command line in Ubuntu 10.04 Server.
View 1 Replies View RelatedI did horrible mistake and installed upgrade for firefox 3.6.15 via KPackageKit. There would be normally no problem but this version does not work with Q3 live Is there a way to select older version of software in KPackageKit, Synaptic or via dpkg?P.S. I don't want to install it from tar.gz2 file - I want normal installation.
View 1 Replies View RelatedI'm trying to install fedora with the live cd into my windows machine. When i get to the select drive nothing can be selected.
View 1 Replies View RelatedSo I've installed Ubuntu before on this machine, but this time around with Lucid, it's just not working.
It all works fine until step four, where you choose your partition. There are no choices. Simple as that. Continuing just tells me to fix that there are no partitions, but I cant. There are questions similar to mine on here, but none are answered.
I really need this installed and cant use the live version where I'm posting from now.
