im trying to install ubuntu 10.10 on a dell precision m2400.The problem is that it goes into the "ubuntu" logo and it reads the cd... and nothing happens, it never leaves that screen
View 9 RepliesI am using a Dell D810 Notebook and Ubuntu 10.04 LTS with all the latest upgrades, I would like to know if it is ok to upgrade to Ubuntu 10.10. I have read the release notes and I am not certain if Linux kernel 2.6.35 supports my Notebook. Below I have included out put for cat /proc/cpuinfo and x86info -a
Ubuntu 10.04 works very well on my Dell D810.
My notebook seems to just freeze once in a while sometimes once a week, sometimes once in two weeks, sometimes once in two consecutive days. I cannot for the love of it narrow it down to anything. Granted, I have not followed the logs, but doing so for the first time gave no real results either.
View 5 Replies View RelatedI want to convert an old Dell Inspiron Notebook (circa 2000) to a linux based machine. Any suggestions on which distro to use, or some sites that will tell me how to accomplish this task?
View 2 Replies View RelatedThe kernel-PAE-2.6.30.5-43 upgrade will not boot on my Dell 1545 notebook. The initialization stops and the systems freezes right at the point that the login prompt should appear. I do not have invidia drivers. I have Intel video drivers. Also there is a loud 'pop' in the sound system early in the initialization sequence. For the time being, I have removed the 2.6.30.5-43 upgrade via yum.
View 8 Replies View RelatedI have just bought a new DELL Studio 1555 laptop which has already Windows Vista- home edition in it,however I would like to install Red Hat Linux or Fedora on this laptop which can also support Oracle 10g.
Below is the link of the laptop to give you an overview of the configuration.
[url]
Searching for one week at the forum, sorry if i missed any posts about my issue,
My specs:
Microprocessor1.4 GHz Intel� Celeron� M Processor 360
Microprocessor Cache1MB L2 Cache, 400MHz FSB
Memory256MB 400MHz DDR2 System Memory (1 Dimm)
Video GraphicsIntel� Extreme Graphics 2 (shared)
Video Memory256mb: up to 64mb shared
Hard Drive40GB (4200RPM) Hard Drive
[Code]...
Today i used the mini CD command-line install, got the system running at the terminal, but installing xorg or gnome and rebooting results again in fail. Tried to edit xorg.conf through nano, after sudo apt-get install but before reboot, but was fail again (couldn't open the file). I dont know exactly if its the gnome or the X the issue, because i tried at the same notebook the ubuntu 8.04, the wallpaper pops up but it freezes after, i cannot use the X. Both cd's are checksum valid originals from canonical
is there any ways to install gnome and x in the terminal, edit the xorg.conf with anything that solve the problem and reboot? update 23:11PM: I found it, its a issue with old intel graphic cards. i915.modeset=0 xforcevesa in the boot parameters and i could use the installer in the lucid live cd. but now i need to edit the grub to always boot with this parameter.
Today I tried to upgrade from 10.04 to 10.10. It got through probably 50% of the install and then everything froze. I had to hard restart the computer, but when I try to boot to ubuntu, it just gives me a prompt and acts as if everything is wrong. I have tried a few things (sudo dpkg -configure -a; sudo dpkg -reconfigure; etc..) but it all seems to lead back to the prompt with no success. Is there anyway to recover my upgrade? Do I have to resort to a reinstall of ubuntu and lose all my data?
View 9 Replies View RelatedI have failed to install kUbuntu for a several days already, so I am currently on SuSE (hate it, love ubuntu...). I don't know what is wrong with my PC, but something ain't right. I tried:1st: Installing kUbuntu x64 - Result: Freeze on loading screen (I think..don't even remember anymore ).2nd: Running Live CD ("Try Kubuntu") - Freeze on splash screen, at the Hard Disc icon (can't get past that one).3rd: Installing Ubuntu x64 with Unetbootin - (GNOME variant). - I get a nice graphic card error, can't unerstand anything - screen messed up.4th: Installing Ubuntu x86 with Unetbootin (GNOME) - same as 3rd time.5th: Decided that maybe something was wrong with the download. Downloaded kUbuntu via torrent. Installed with Unetbootin in a flash - no change.6th: Installed SuSE7th: Downloaded kUbuntu x86, burnt, tried installing, back to 1st step.Is this an infinite loop ?Hardware specs:
250GB x 2 Seagate Barracuda ( I had them connected in a RAID0 via bios previously(Windows 7), had trouble installing suse because of this, but I deleted RAID information and disabled raid in BIOS setup )GeForce 9800 GX2Quad 2 Core 2.664 GB unbuffered ram ( 4 x 1 GB)
Im trying to install Ubuntu, here are my problems and the solutions ive tried: I've downloaded 10.10 in 64 bit and 32 bit. I've also tried with 10.4.1 LTS.I've tried burning it to a disc and i've tried making a bootable USB. (I ran out of dvds so im only trying from usb now).I load from the disc/USB and ill get the menu asking if i want to try ubuntu, install ubuntu, check for errors etc..... I choose try ubuntu and ill get the UBUNTU logo with the loading dots undernieth.The screen then glitches and theres multicolor lines frozen accross the monitor. Stuck that way until i restart.This also happens when i try to install it to the harddrive.It happens on both versions in both 64 and 32 bit. I checked the disc and all files are present.I've had ubuntu installed over a year ago.
AMD 64 3200 processor
nvidia geforce 7800gt
2gb ram
What should i do? Heres an image i took with my phone. http:[url].....
I have not been able to install a linux distro since 9.04. Karmic and lynx both freeze on install. (screen gets glitchy) I am a total noob when it comes to anything beyond installing.
Opteron 165
DFI lanparty ultra-d
2gb gskill
EVGA 7800gt
what's going wrong? :S:S
View 3 Replies View RelatedI can't install 11.4. First install freeze when loading basic drivers. I set acpi=off and install start but freeze during setting.I think also that 11.4 was not mature.I have a Asus P7P55 MB with Intel Core i5 CPU 750 8Go RAM and Nvidia GT200 GPU.No problem with 11.2 except sound.
View 5 Replies View RelatedI tried to install Ubuntu 10.10 Server 32bits and 64bits but each time the installer stopped at 45% during "Starting up the partitioner" with the message "Scanning disks".
I installed Windows 7 64bits on the disks without problem.
I installed IPCop 1.4.20 successfully.
However, I tried to install Fedora 14 32bits and 64bits but it also stopped (ie crashed the partitioner) during the "Install To Harddisk" via LiveCD.
Similarly, OpenNode 1.0 also crashed with a bug report that has alot of python error messages. All mean nothing to me.
I even tried to partition the disks first via Fedora 14 LiveCD. Still the same thing.
Has anyone encountered this sort of problems before? If so, any resolutions?
Could this be the problem with the SATA2 disks?
I tried out many distros on my desktop before experimenting with my oshiba Satellite A665 laptop with integrated intel graphics. Everything worked out as normal until I was testing Ubuntu on a live cd, I clicked install and it sent me back to the login screen before I had made an account. So I then chose to restart and it started glitching so I had to manually power off. Ever since then whichever distros I try to install, they face numerous errors. On Ubuntu and Peppermint they freeze on the 5 dots installation part and Linux Mint just has a permanent black screen. Even the current Peppermint OS (only distro i have)hangs on the 5 dots when trying to boot onto the computer. This has resulted me in a computer that cant do anything, i've tried the noquiet and nosplash options but they don't seem to work. I was thinking of installing Windows and maybe erasing the disk by installing another distro later?
View 8 Replies View RelatedThis card has been the bane of my existence for a while. In the old days I could get it to work with Fedora using a generic video driver. A friend recommended OpenSuse because of my love for KDE.
The good news is that install went greeeeat. But after that, I once again got a black screen with a line randomly done it. Is there a way to change? I tried changing those resolution options but it didn't work. I have the Windoze driver from Dell's site. Its Dell Inspiron 5160.
I downloaded Ubuntu 10.04 desktop and burned the CD. I changed the boot order on my Dell Inspiron 8100 to search for CD first. On startup, I see it flash - ISO LINUX something ............ The light flashes on my CD drive for a minute or so. I see a little icon at bottom of screen with a stick figure of a man and something else for a few seconds, then I see a white cloud flash on the screen that reduces in size and disappears, after another minute or so of the drive light flashing everything stops and still a black screen. Then, I tried hitting escape key a couple of times and I heard a few seconds of jungle music. The drive light flashes again for a while but nothing else happens. It seems like it's almost there, but not making it all the way for some reason.
By the way, if it matters, my Dell hard drive is partitioned to C: and D: I thought it would run a little faster that way, but not really noticable. I have most everything on C: right now. I hope to install side by side as I have a couple of applications I need Windows for, but would like to use Ubuntu for everything else. More questions about that later, on getting it to boot from the CD?
Since posting the above earlier under Dell, I have been able to boot from a borrowed 9.04 disk okay. And, was able to boot another computer with the 10.04 disk that I burned. The disk is apparently good, so why doesn't 10.04 work and 9.04 does?
I've been trying for three days to install Ubuntu 10.10 on a Dell GX240, with no luck. Each and every time, I boot from the Live CD and get as far as the language selection screen. I click "Forward," and the little gearwheel spins forever. Or until I power the machine down, whichever comes first. The BIOS is at its latest level (A05), and it's in original factory configuration -- I haven't made any modifications to it. I've also tried booting into "Try Ubuntu without installing," and running "Install Ubuntu" from within that environment, with the same non-results.
After a minute or so, the machine becomes completely unresponsive and I have to power down and start all over again. I've done a lot of prowling the web to find answers, most of which recommend adding "acpi=force" to the boot options. Unfortunately, that doesn't work for me. Nor have any of the various acpi/apic options. I don't think this is a hardware problem, since I am able to install and run XP on this machine without any problems whatever.
Specs for the machine are:
256M memory, at 133Mhz
CPU speed 1.7 GHz, Pentium 4
I am trying to install ubuntu server 9.10 on two dell poweredge 2550 servers that I have at work and I can't get the install to complete on either. I saw some posts somewhere saying that it could be bad memory in the computers so I even put brand new memory in each, which needed upgraded anyway but the install still fails.The install usually hangs when trying to detect network drivers and it also hangs on some other file (I forget now). I remember I had an older version of linux on one of them before. The install says the file is corrupted on the cd. I have burned multiple cd's in different drives on different computers using the lowest speed on all of them, and all install attempts fail. I can even take the exact same cd's and install in vmware on my mac so I know for a fact the cd's are fine. What makes me more confused is that I can install windows server 2003 without a hitch on both the servers I am trying to install Ubuntu on.
View 3 Replies View RelatedI am trying to install ubuntu 8.04 general desktop flavour in dell poweredge 2650, but it is not working..doesnt ubuntu 8.04 supports installation in a dell poweredge 2650..if not so thn what can be done for that..any other latest version which does so??
View 2 Replies View Relatedthis is my first post sorry if im not clear OK i downloaded Ubuntu 9.1 32bit burned it to a CD and popped it in my dell latitude c600 i was going to set it up to dual boot with xp i already have 2 partions so every thing was ready
i hit install and saw a Ubuntu symbol fading in and out after that i got a whole heap of i/o errors ranging from 350 to 500 for the first number, then a bit later it loaded up the busy cursor for Ubuntu on a black screen it then changed to a cross outline and no matter how long i let i go for i do not change at all off that the disc isn't the problem because it works on my desk top live and install
I am trying to install Ubuntu 10.04 on a dell Inspiron laptop. When I choose the install option in the boot menu it loads my to a log in screen. but Ubuntu has never been installed in my laptop.
View 5 Replies View RelatedI am attempting to load 10.10-i386 on a Dell Inspiron. I have created my boot CD and all works fine with the install manager until it gets to the "Who are you?" page. It will not let me advance past this page. I am a complete rookie on Ubuntu and Linux OS.
View 5 Replies View RelatedFollowed all the steps to install the Netbook Edition. Boot up on Live USB worked great, install went thru without a hitch. Changed the BIOS settings to boot on the SSD HD. Unfortunately, after th BIOS splash screen, all I get is a blinking cursor on the upper-left corner of the screen. I suspect my SSD is starting to fail.
View 2 Replies View RelatedJust installed 11.04. Before install, during live cd preview, it detected my dell wireless card and offered to install a Broadcom (as I remember) proprietary driver. However, after a proper install, it did not make the same offer and left no wireless available.
View 4 Replies View RelatedI just installed 10.04 on a Dell Dimension T7500. I first set up linux partitions following first FAT16 (Dell Utilities) and second FAT32 (labeled OS) partitions. The installer suggested there was no OS when I was installing Ubuntu 10.04. After restart I see that the first option in boot order is "Onboard or USB CDROM drive". But Ubuntu never booted. I then changed boot order to first look in ID00 LUN0 ATA. Same thing..no boot of Ubuntu. On the other machines on which I've installed Ubuntu I have dual boot with Windows and have GRUB installed. So....how best to set this up and find out if I have a workable OS?
View 8 Replies View RelatedI am unable to install karmic on my dell inspiron1464 laptop. It has core i3 processor n 2 gb ram with windows7 already installed. I had installed karmic on my pc n it didn't gave any problem but when I am trying to install it on my laptop it is just showing the try ubuntu n install ubuntu options and when I select the option to install it is showing blank screen n after sometime even the cd stops working n I have to reboot again. I want to install karmic on my laptop with dual boot option wit windows 7.
View 9 Replies View RelatedI have a brand new Dell m4500 workstation. Here are some hardware features:Core i7-820 processor4 GB RAM256GB Solid state diskNVidia quadro FX 1800M graphics cardWhen I try to run the 10.04 graphic installer (from a CD or from a USB stick built using pendrivelinux) I see all of the text information as it is loading (i.e. all the white text and dots and stuff) but then the screen just goes blank.
When I try to run the 10.04 alternative installer from a CD, I can install successfully, however when I boot into it, I get the same problem as the installer. I see a bunch of text as it's booting up, and then the screen goes blank. I figure this is a graphics driver issue, so I downloaded the NVidia drivers, and then tried to start the computer in "recovery mode" to get to a root shell and install the drivers. But after selecting "recovery mode", I again see a bunch of white text, and then I get a momentary (~0.5sec) view of the recovery menu (i.e. dpkg, root, netroot, xfix) or something like that. Then... surprise... the screen goes blank.I tried both the 10.04 64bit and the 10.04 32bit versions with the same results.
After installing 10.04, and after booting up with the blank screen, on a whim I entered my user name and password and happened to hear that familiar login sound... though the screen is still blank. I tried logging into the root shell from the "recovery mode" via memory (pressing down a whole bunch, and then up one), and then I tried to run the NVidia display driver installation by typing the installer name, and then by entering options based on notes I took when I ran the installer from 9.04... however since I can't see the screen there's no way to tell if that worked... and nothing has changed.I'm currently running 9.04 which is working moderately well, with the exception that the SDCard reader and the network card don't work. I'm using a USB network device for now. I don't know enough about linux to know how to diagnose this problem
I just bought a new Dell Latitude E6510. When I boot from the Ubuntu 10.10 64bit disk (I've checked the disk for errors already), the initial, purple splash screen comes up, but then the screen just goes blank and stays that way. I never even see a grub screen.I tried Linux Mint 9 with both the 64 bit DVD and the 32 bit CD. Both Mint disks bring up a grub boot screen, but then the screen goes blank just like Ubuntu 10.10. I can hear Mint's "login" sound, but nothing shows up on the screen
View 3 Replies View RelatedI will say this now; I am still in high school, so forgive my stupidity. I am trying to install either 10.10 or 10.04 on a Dell 1525. It has no operating system on it, and the CD/DVD drive is nonexistent. I have tried to install 10.10 on it using a USB, with both UNetbootin and Pen Drive Linux. Using either one, both end up freezing at the "Preparing to Install" screen. When trying to install 10.04, it will not load, even after 24 hours. On the loading screen, I pressed F1 to view the terminal and got this output:
(process:352): GLib-WARNING **: getpwuid_r(): failed due to unknown user id (0)
Killed
I got all downloads from their home websites, www.ubuntu.com, www.pendrivelinux.com, and www.unetbootin.sourceforge.net. I have spent all my spare time since the newest release trying to fix whatever problem there is, so does anyone know what I did wrong?