Ubuntu Installation :: Cannot Install 10.10 On Dell GX240
Oct 14, 2010
I've been trying for three days to install Ubuntu 10.10 on a Dell GX240, with no luck. Each and every time, I boot from the Live CD and get as far as the language selection screen. I click "Forward," and the little gearwheel spins forever. Or until I power the machine down, whichever comes first. The BIOS is at its latest level (A05), and it's in original factory configuration -- I haven't made any modifications to it. I've also tried booting into "Try Ubuntu without installing," and running "Install Ubuntu" from within that environment, with the same non-results.
After a minute or so, the machine becomes completely unresponsive and I have to power down and start all over again. I've done a lot of prowling the web to find answers, most of which recommend adding "acpi=force" to the boot options. Unfortunately, that doesn't work for me. Nor have any of the various acpi/apic options. I don't think this is a hardware problem, since I am able to install and run XP on this machine without any problems whatever.
Specs for the machine are:
256M memory, at 133Mhz
CPU speed 1.7 GHz, Pentium 4
I installed Ubuntu 10.10 32-bit on a Dell Optiplex GX240, it has an ATI Rage 128 Pro Ultra TF (from lspci output) and all the graphics run very slow (I'm assuming because OpenGL and hardware acceleration are disabled). I Googled the issue and found several solutions but non of them worked. I tried installing the ATI Catalyst driver but it doesn't recognize the graphics card. I also tried to install the fglrx drivers but when I run fglrxinfo I get a segmentation fault. So the X server is running with the open source (r128) drivers and it's really slow.
This card has been the bane of my existence for a while. In the old days I could get it to work with Fedora using a generic video driver. A friend recommended OpenSuse because of my love for KDE.
The good news is that install went greeeeat. But after that, I once again got a black screen with a line randomly done it. Is there a way to change? I tried changing those resolution options but it didn't work. I have the Windoze driver from Dell's site. Its Dell Inspiron 5160.
I downloaded Ubuntu 10.04 desktop and burned the CD. I changed the boot order on my Dell Inspiron 8100 to search for CD first. On startup, I see it flash - ISO LINUX something ............ The light flashes on my CD drive for a minute or so. I see a little icon at bottom of screen with a stick figure of a man and something else for a few seconds, then I see a white cloud flash on the screen that reduces in size and disappears, after another minute or so of the drive light flashing everything stops and still a black screen. Then, I tried hitting escape key a couple of times and I heard a few seconds of jungle music. The drive light flashes again for a while but nothing else happens. It seems like it's almost there, but not making it all the way for some reason.
By the way, if it matters, my Dell hard drive is partitioned to C: and D: I thought it would run a little faster that way, but not really noticable. I have most everything on C: right now. I hope to install side by side as I have a couple of applications I need Windows for, but would like to use Ubuntu for everything else. More questions about that later, on getting it to boot from the CD?
Since posting the above earlier under Dell, I have been able to boot from a borrowed 9.04 disk okay. And, was able to boot another computer with the 10.04 disk that I burned. The disk is apparently good, so why doesn't 10.04 work and 9.04 does?
I am trying to install ubuntu server 9.10 on two dell poweredge 2550 servers that I have at work and I can't get the install to complete on either. I saw some posts somewhere saying that it could be bad memory in the computers so I even put brand new memory in each, which needed upgraded anyway but the install still fails.The install usually hangs when trying to detect network drivers and it also hangs on some other file (I forget now). I remember I had an older version of linux on one of them before. The install says the file is corrupted on the cd. I have burned multiple cd's in different drives on different computers using the lowest speed on all of them, and all install attempts fail. I can even take the exact same cd's and install in vmware on my mac so I know for a fact the cd's are fine. What makes me more confused is that I can install windows server 2003 without a hitch on both the servers I am trying to install Ubuntu on.
I am trying to install ubuntu 8.04 general desktop flavour in dell poweredge 2650, but it is not working..doesnt ubuntu 8.04 supports installation in a dell poweredge 2650..if not so thn what can be done for that..any other latest version which does so??
this is my first post sorry if im not clear OK i downloaded Ubuntu 9.1 32bit burned it to a CD and popped it in my dell latitude c600 i was going to set it up to dual boot with xp i already have 2 partions so every thing was ready
i hit install and saw a Ubuntu symbol fading in and out after that i got a whole heap of i/o errors ranging from 350 to 500 for the first number, then a bit later it loaded up the busy cursor for Ubuntu on a black screen it then changed to a cross outline and no matter how long i let i go for i do not change at all off that the disc isn't the problem because it works on my desk top live and install
I am trying to install Ubuntu 10.04 on a dell Inspiron laptop. When I choose the install option in the boot menu it loads my to a log in screen. but Ubuntu has never been installed in my laptop.
I am attempting to load 10.10-i386 on a Dell Inspiron. I have created my boot CD and all works fine with the install manager until it gets to the "Who are you?" page. It will not let me advance past this page. I am a complete rookie on Ubuntu and Linux OS.
Followed all the steps to install the Netbook Edition. Boot up on Live USB worked great, install went thru without a hitch. Changed the BIOS settings to boot on the SSD HD. Unfortunately, after th BIOS splash screen, all I get is a blinking cursor on the upper-left corner of the screen. I suspect my SSD is starting to fail.
im trying to install ubuntu 10.10 on a dell precision m2400.The problem is that it goes into the "ubuntu" logo and it reads the cd... and nothing happens, it never leaves that screen
Just installed 11.04. Before install, during live cd preview, it detected my dell wireless card and offered to install a Broadcom (as I remember) proprietary driver. However, after a proper install, it did not make the same offer and left no wireless available.
I just installed 10.04 on a Dell Dimension T7500. I first set up linux partitions following first FAT16 (Dell Utilities) and second FAT32 (labeled OS) partitions. The installer suggested there was no OS when I was installing Ubuntu 10.04. After restart I see that the first option in boot order is "Onboard or USB CDROM drive". But Ubuntu never booted. I then changed boot order to first look in ID00 LUN0 ATA. Same thing..no boot of Ubuntu. On the other machines on which I've installed Ubuntu I have dual boot with Windows and have GRUB installed. So....how best to set this up and find out if I have a workable OS?
I am unable to install karmic on my dell inspiron1464 laptop. It has core i3 processor n 2 gb ram with windows7 already installed. I had installed karmic on my pc n it didn't gave any problem but when I am trying to install it on my laptop it is just showing the try ubuntu n install ubuntu options and when I select the option to install it is showing blank screen n after sometime even the cd stops working n I have to reboot again. I want to install karmic on my laptop with dual boot option wit windows 7.
I have a brand new Dell m4500 workstation. Here are some hardware features:Core i7-820 processor4 GB RAM256GB Solid state diskNVidia quadro FX 1800M graphics cardWhen I try to run the 10.04 graphic installer (from a CD or from a USB stick built using pendrivelinux) I see all of the text information as it is loading (i.e. all the white text and dots and stuff) but then the screen just goes blank.
When I try to run the 10.04 alternative installer from a CD, I can install successfully, however when I boot into it, I get the same problem as the installer. I see a bunch of text as it's booting up, and then the screen goes blank. I figure this is a graphics driver issue, so I downloaded the NVidia drivers, and then tried to start the computer in "recovery mode" to get to a root shell and install the drivers. But after selecting "recovery mode", I again see a bunch of white text, and then I get a momentary (~0.5sec) view of the recovery menu (i.e. dpkg, root, netroot, xfix) or something like that. Then... surprise... the screen goes blank.I tried both the 10.04 64bit and the 10.04 32bit versions with the same results.
After installing 10.04, and after booting up with the blank screen, on a whim I entered my user name and password and happened to hear that familiar login sound... though the screen is still blank. I tried logging into the root shell from the "recovery mode" via memory (pressing down a whole bunch, and then up one), and then I tried to run the NVidia display driver installation by typing the installer name, and then by entering options based on notes I took when I ran the installer from 9.04... however since I can't see the screen there's no way to tell if that worked... and nothing has changed.I'm currently running 9.04 which is working moderately well, with the exception that the SDCard reader and the network card don't work. I'm using a USB network device for now. I don't know enough about linux to know how to diagnose this problem
I just bought a new Dell Latitude E6510. When I boot from the Ubuntu 10.10 64bit disk (I've checked the disk for errors already), the initial, purple splash screen comes up, but then the screen just goes blank and stays that way. I never even see a grub screen.I tried Linux Mint 9 with both the 64 bit DVD and the 32 bit CD. Both Mint disks bring up a grub boot screen, but then the screen goes blank just like Ubuntu 10.10. I can hear Mint's "login" sound, but nothing shows up on the screen
I will say this now; I am still in high school, so forgive my stupidity. I am trying to install either 10.10 or 10.04 on a Dell 1525. It has no operating system on it, and the CD/DVD drive is nonexistent. I have tried to install 10.10 on it using a USB, with both UNetbootin and Pen Drive Linux. Using either one, both end up freezing at the "Preparing to Install" screen. When trying to install 10.04, it will not load, even after 24 hours. On the loading screen, I pressed F1 to view the terminal and got this output:
(process:352): GLib-WARNING **: getpwuid_r(): failed due to unknown user id (0) Killed
I got all downloads from their home websites, www.ubuntu.com, www.pendrivelinux.com, and www.unetbootin.sourceforge.net. I have spent all my spare time since the newest release trying to fix whatever problem there is, so does anyone know what I did wrong?
I' trying to install 10.10 Desktop from a CD onto a Dell E5410 notebook with Windows 7 installed.
The problem is that during the installation, the installer doesn't see the Windows partition, moreover, it doesn't see _any_ other partition.
I've tried with CentOS 5.5 as well and it returned some error related to GPT Partition Table corrupt which might have been corrupted by a software (or not).
Removing Windows 7 completely is not an option, there's a bunch of business applications which will not run on Linux even with Wine.
I'm not sure if the problem lies on the hardware, or the installer. The BIOS provides advanced UEFI boot options and legacy boot, but this doesn't explain why no partition is discovered.
Tech specs: core i5, 4GB ram, 320 GB disk space. The installer is 32 bit, but I'm quite the architecture doesn't really matter.
If someone has more knowledge about this kind of issue, any answer is welcome.
I have a Fedora 6 in DELL Optiplex 755. When I installed Fedora 8, I got the following error message:
"An unhandled exception has occurred. This is most likely a bug. Please save a copy of the detailed exception and file a bug report against anaconda at http://bugzilla.redhat.com"
This error message is from action of screen: "Installation requires partitioning of your hard drive. By default, a partitioning layout is chosen which is reasonable for most users. You can either choose to use this or create your own."
I chose: "Remove Linux partitions on selected drives and create default layout" or
I chose other options, but I still got same error message.
Then I switched to a new HHD, but I still got the same error message.
New to Fedora. I am trying to install Fedora 11 onto Dell Workstation 670. would you please kindly let me know 1) which install media could i use?2) could I maintain both Fedora 11 and Windows on my workstation?
I just got a new dell 15z and it hangs on the install "Waiting for hardware to initialize"of the 64bit fedora. I have tried both the nomodeset and noprobe and still to no avail. I have also tried installing ubuntu and the installer will not run so im at a loss. Any ideas from the fedora community.Is there any way I can debug anaconda so I can see where it is hanging?
I've never tried installing any other operating system on my desktop so I'm not sure if it's a 9.10 bug (probably not), but whenever I choose any of the options after the ubuntu cd has been loaded at startup it goes to a black screen with the underscore at the top, and promptly reboots. At this point in time I can just boot back into windows or get to the same selection screen off of the cd.I've tried burning 3 seperate cd's and at the moment and trying to boot them on my laptop (but not working... hrm). I'm thinking about redownloading the iso in a couple minutes.
I have a Dell Laptop C640 Latitude that locks up with in a min or two of booting up after I update from 09.04 to 09.10 or if I do a clean install of 04.10. I do not know if it is the laptop or the 09.10 that is doing it.
I'm a Dell Optiplex 380 MT Workstation user which have a Intel HDA Integrated sound controller. I was using Ubuntu 9.10 32 Bits Karmic, and all works fine, but, two days ago I did a fresh install to Ubuntu 10.4 LTS 32 Bits Lucid. In Ubuntu 9.10 I didn't do nothing to make work all features of my workstation, but, in 10.4 LTS the sound don't work. The hardware appear in "Speaker Icon" and in the alsamixer menu, but nothing works. It's happens in the Live CD, Installation in Hard Disc, 32 Bits Version and 64 Bits version.
Here is the output of the command, in Ubuntu 9.10 & Ubuntu 10.4. The only difference that I see is the follow in lspci (bold text): lspci Ubuntu 9.10: 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01) Ubuntu 10.4: 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)
At both version this is the which use (same output): cat /proc/asound/card0/codec#0 Codec: Realtek ALC269
I've installed linux-backports-modules-alsa-2.6.32-21-generic-pae, reboot system and nothing happens. lsmod | grep snd Ubuntu 9.10 .....
I am getting ready to install Ubuntu 9.04 on my Dell laptop, only because 10.04 won't work. I have the hard drive partitioned as C: and D: . I am keeping Windows on C: for a couple of applications that need it. I still have a few things on the D: drive. Do I need to have it completely clean and formatted? And, will Ubuntu ask where I want it to be installed or will it just take the largest contiguous space available? After the install, does the system automatically ask if I want Windows or Ubuntu or how do I tell it which system to bring up?
I'm currently stuck at the "lubuntu - Install lubuntu" screen on a Dell Optiplex GX150 (specs; Pentium III 1 GHz, 512 mb RAM, 20 GB HDD). I can hear the CD spinning up but nothing happens. Looking at the specs, the PC should be able to run lubuntu, right? Could somebody point me in the right direction? I've verified both the ISO and the CD checksum, both check out, so there should be no issue with the install media
I've just been given my new dell E5520 laptop. I stuck in the f15 DVD and booted. After selecting install I get the usual boot screen then it stops with trace errors. I have heard of some issue with linux and new latops but cant find where I got this from.
I would copy them onto here but have no idea how to get the info of the laptop. If there are any specific items needed let me know and I will type them in. This is going to be very annoying and I dont what to use the windows 7 thats on it.
Just for info I have just booted linux mint 11 and that booted and loaded ok. I will try and take a pic of the fedora error
I just got my brand new shiny Dell XPS L502X laptop today and planned to do a dual-boot installation between Win 7 and F15. Win 7 went great but I can't even get the 64-bit Live DVD of F15 to load. The splash screen always hangs while the bar loads, but if I push ESC so I can see what's going on in the background, I get a whole lot of different error messages and the last message is "fixing recursive fault but reboot is needed." What I get is nearly identical to what I found in this post. I've already tried the usual kernel options that have always worked for me in the past, such as noapic, noacpi, and nomodeset. However, the Live DVD still won't boot. There's got to be a way to install this. Any ideas?
I would like to know if someone was able to upgrade/fresh install ubuntu 10.10 maverick on a dell studio hybrid. First I've tried to upgrade. Everything went well, until the system started. First thing to notice is that the orange was so bright that was almost impossible to look at the monitor. Not a big deal, adjusting some monitor brightness etc. Second the mouse (usb) stopped for some fraction of a second, or a second, when you click to open a program. It is annoying but it is also a problem that I could wait to find some solution.
Third and worse, it was completely impossible to see videos in vlc or other players, I've tried vlc, xine, etc, the videos was stuttered, choppy. SMPlayer was able to play them better. I've tried the solution here [URL] and it does not work at least for me. Fourth the fans went completely crazy, running as mainly when I have to use smplayer, I've found some complains about that [URL] but the solution does not apply to my computer.
Then I've tried a fresh install hoping that some of the troubles would not appear. The only trouble solved was the look and feel. Mouse the same trouble, stuttered, choppy videos on vlc, fans running all the time. And now it was impossible to install the wireless proprietary driver Broadcom sta. The only solution was to come back to Lucid. A fresh install of Lucid and mouse working ok, no troubles seeing videos in vlc, fans working absolutely normal and no troubles to install the wireless driver.
I'm attempting to install Natty Narwhal Desktop 32-bit on my Dell Dimension 4700. I get to the screen with various options (Install Ubuntu, Test Memory, etc.) but on choosing boot from disk or install, I just get a black screen. Any ideas what might be the problem? I'm don't have much experience with Ubuntu, so a simple explanation would be preferred.
