Ubuntu Installation :: Unable To Install Karmic On Dell 1464
Mar 4, 2010
I am unable to install karmic on my dell inspiron1464 laptop. It has core i3 processor n 2 gb ram with windows7 already installed. I had installed karmic on my pc n it didn't gave any problem but when I am trying to install it on my laptop it is just showing the try ubuntu n install ubuntu options and when I select the option to install it is showing blank screen n after sometime even the cd stops working n I have to reboot again. I want to install karmic on my laptop with dual boot option wit windows 7.
View 9 Replies
ADVERTISEMENT
Jan 17, 2010
I've never tried installing any other operating system on my desktop so I'm not sure if it's a 9.10 bug (probably not), but whenever I choose any of the options after the ubuntu cd has been loaded at startup it goes to a black screen with the underscore at the top, and promptly reboots. At this point in time I can just boot back into windows or get to the same selection screen off of the cd.I've tried burning 3 seperate cd's and at the moment and trying to boot them on my laptop (but not working... hrm). I'm thinking about redownloading the iso in a couple minutes.
View 2 Replies
View Related
Oct 13, 2010
I will say this now; I am still in high school, so forgive my stupidity. I am trying to install either 10.10 or 10.04 on a Dell 1525. It has no operating system on it, and the CD/DVD drive is nonexistent. I have tried to install 10.10 on it using a USB, with both UNetbootin and Pen Drive Linux. Using either one, both end up freezing at the "Preparing to Install" screen. When trying to install 10.04, it will not load, even after 24 hours. On the loading screen, I pressed F1 to view the terminal and got this output:
(process:352): GLib-WARNING **: getpwuid_r(): failed due to unknown user id (0)
Killed
I got all downloads from their home websites, www.ubuntu.com, www.pendrivelinux.com, and www.unetbootin.sourceforge.net. I have spent all my spare time since the newest release trying to fix whatever problem there is, so does anyone know what I did wrong?
View 9 Replies
View Related
Mar 19, 2010
I recently got a Dell Netbook Mini10v with Ubuntu 8.04 preinstalled. It does not give the option to upgrade using the normal features in the GUI (as far as I can tell) how should I go about upgrading my system to 9.10?
View 2 Replies
View Related
Nov 16, 2010
I have a dell netbook with 8.04lts the network manager has been deleted and I am unable to install a new one
View 1 Replies
View Related
Jan 22, 2010
unable to install initramfs-tools error in Karmic I'm having a devilish time installing Karmic on my AMD 64-bit.
Today's missive is:
"Unable to install initramfs-tools."
"Check /var/log/syslog"
After a trying to fix a corrupted 9.04, I have attempted repeated installs of 9.10 on a completely reformatted clean drive. I can get the live CD working, but when I try the permanent install, using the guided full drive install, it stopped at "Unable to install initramfs-tools." and halts the base system install. I can't find anything on this for Karmic and Launchpad says it was superseded.
Can I skip this and go on? It showed a install list going forward, but if I can't put in the base system, how do I proceed? I've burned 2 9.10 disks, a new 9.04 disk, downloaded 9.10 via package manager while in Live CD and get errors on all during the install process. the check sums match on D/L, but I can't figure how to do a chksum after it's burned to disk. The file sizes do match, but when I go for the install something always halts it at different steps with different errors. No joy.
View 2 Replies
View Related
May 3, 2010
I install Lotus Notes 8.0.1 on Karmic Ubuntu 9.10, the setup is successfully. However, the mail could not show correctly. the Home shows blank. The mail address could not show for each mail. And some html mail could not show at all.Below are the console output.
05/03/2010 03:42:49 PM Lotus Notes client started
2010/05/03 15:43:15.532 SEVERE err.csilabelprovider.fetchimage.exception ::class.method=com.ibm.rcp.csiviews.providers.CSIL abelProvider$1.run() ::thread=Worker-5 ::loggername=com.ibm.rcp.csiviews.providers.CSILab elProvider
[code]...
View 1 Replies
View Related
Apr 17, 2010
I recently installed KArmic Kola on my DELL E6400 - 9600 INTEL PROCESSOR, 4GB RAM, NVIDIA GRAPHIC QUADRO 160. I have the following issues which is making me nervous to work on the system
- System keeps crashing - all of sudden the Caps button LED, NUM LOCK LED keeps blinking and system freezes for a while and restarts
[Code]....
View 1 Replies
View Related
Aug 4, 2010
unable to print to / install / locate Dell P1500 laser
The printing troubleshooter says:
"CUPS service does not appear to be running. to correct this , choose SYSTEM->Administration->Services from the main menu and lookfor the cups service"
unfortunately there is no->Services tag under ->Administration to look for the CUPS Spooler.
running 10.04 64 Bit on a dual boot with vista AMD6000 box Printing is fine on the vista side so the printer and usb connection is fine.
View 4 Replies
View Related
Mar 11, 2010
I am having issues installing Centos on a Dell Poweredge 1950. I have tried 5.3 and 5.4, and the text only install. The error I get is when I select what keyboard layout to use. An error window pops up and says "Assertion ((C * heads + H) * sector + S == A) at dos.c:624 in function probe_partition_for_geom() failed " I can click ignore and cancel but it instantly pops back up. I have tried to look up the error but can't find any information on it.
View 4 Replies
View Related
Apr 3, 2010
I can't willingly cause this to happen, it's completely random. I strongly believe it is the video card. My wife insists that it's a virus, but it's ridiculously hard to get a virus on Linux and she doesn't have anything relevant on the matter other than 'people are switching to it on Facebook, so hackers are attacking it now.'.
Here's my specs:
Distro: Xubuntu 9.04
Laptop: Dell Inspiron 9300
Processor: 1.02Ghz
Memory/RAM: 512
Video Card: ATI Radeon X300
View 3 Replies
View Related
Jun 20, 2010
The system is a Dell 530n. It came preinstalled with Ubuntu 8.04. I didn't care for the way Dell handled its repositories (they don't keep them current) so I installed Ubuntu 10.04.
Now when I select "F12 Boot Options" while the BIOS is bringing things to life, I still get the various boot options, however, when I select "Utility Partition" all I get is "Not found. No boot device available."
For those not familiar, the Dell Utility Partition is a hidden partition that has various utilities to help troubleshoot hardware problems.
What did Ubuntu 10.04 do and how do I fix this?
View 3 Replies
View Related
Jun 28, 2010
Have been running Karmic 910 for six months on a Dell Latitude D510 laptop with a Pentium M CPU, 2 GB of RAM and Intel 915 graphics, and I really like it, especially the Gnome desktop. However, a glitch occured after suspending, resuming, shutting down and trying to restart. Now after selecting Ubuntu in Grub the Ubuntu logo shows up onscreen, doesn't seem to pulsate, and eventually is replaced by an error message that the system gave up waiting for root device.
The LiveCD shows the Ubuntu partition as unrecognized, unknown or unused in Palimpsest Disk Utility, though Gparted shows it as normal ext4. The partition doesn't show up in Places. From the command prompt (via ctrl-alt-F1) I'm able to run fdisk, which shows the partitions but am unable to mount the Ubuntu sda4 partition - the error message is that the file type must be specified.
Starting recovery mode in Grub brings about 25 lines of startup messages, mostly dealing with usb devices, but a few render errors are there too. The last message before dropping to the ash shell is that a device could not be found. (ALERT! /dev/disk/by-uuid/5cee... does not exist.) The ash commands are completely new to me, so I haven't had any luck with recovery mode.
If the problem is related to Intel graphics, I would like to try some "quirks" (software fixes for hardware problems, including Intel graphics bugs) mentioned on the ubuntu.wiki site. I'd also like to recover the data on the desktop, but so far cannot get into the file system.
Does GRUB need to be reinstalled? If so, why?
Would reinstalling without formatting anything preserve the data?
Would upgrading to Lucid help prevent the problem from occurring again?
View 8 Replies
View Related
Aug 23, 2010
1. When booting standalone (no extra display) everything works just fine
2. After plugging in an external display on VGA slot, the boot process hangs during xdm start
Config:
OpenSuse 11.3
KDE environment
DELL Latitude e6510 with 8G of RAM
Graphic card is DDR3 NVIDIA� NVS 3100M 512 Mo
View 9 Replies
View Related
Jul 28, 2010
I have recently installed Centos. During the installation, I noticed that only sound was being tested during the installation. Once everything has been installed successfully. I can run Centos with no problem. However, when I tried to switch from one window (browser) to another. The display was slow. Thus, I suspected the driver for the graphic card of my PC is not being installed successfully. When I type /sbin/lspci | grep VGA in the terminal, I get the following output:
02:00.0 VGA compatible controller: nVidia Corporation Unknown device 06fd (rev a1)
03:00.0 VGA compatible controller: nVidia Corporation Unknown device 06fd (rev a1)
Then, I went to the dell support & driver site to download the driver. In the readme file, it is suggested to install dkms first before installing the graphics driver by typing rpm -ivh dkms-2.1.0.1-1.noarch.rpm
I managed to install the dkms without any error.However, when I use rpm to install the graphics driver as suggested by the readme file:
rpm -ivh dell-nvidia-190.42-1dkms_rhel5.3.x86_64.rpm
I get the following errors: error: Failed dependencies:
libX11.so.6()(64bit) is needed by dell-nvidia-190.42-1dkms_rhel5.3.x86_64
libXext.so.6()(64bit) is needed by dell-nvidia-190.42-1dkms_rhel5.3.x86_64[code]....
Since the above errors may be related to the missing packages then I use yum provides and install to find the missing packages. Even I try to install all the matched packages, i still cant install the driver for my graphic card. To be honest, i am not very sure whether I am doing the right things or not. how to solve this slow display problem when switching from one application to another.
View 1 Replies
View Related
Feb 8, 2010
This was my first attempt at compiling a program from source. Maybe I should have picked something easier but I am trying to install gutenprint (formerly gimp print)so I can use my new Epson scanner/printer.Should I remove this thing and start over?
View 1 Replies
View Related
Feb 20, 2010
Ubuntu Karmic worked fine on my computer when it was first released but now doing a fresh install on my computer is totally impossible. The hardware is all the same.If I attempt to install from Live mode - karmic freezes when it's configuring Apt and ubiquity-dm crashes when installing direct from boot.I have switched to Mint but I would like to go back go to Ubuntu.
View 3 Replies
View Related
Feb 5, 2010
Am running karmic on a P2-350 Mhz with 256 Mb RAM. Yes, I know this is an old computer, but it has been very good, performance wise, since versions earlier than 8.x I think.
But now, after a fresh install of karmic, it is very slow at everything. Checked system monitor and CPU is constantly running at between 95% and 100%
View 9 Replies
View Related
Feb 7, 2010
I have looked many places for good tutorial on configuration of amanda client with Karmic, but none of them are good enough. I basically got following message no matter what I change in Client side.
1. I am using 64-bit Ubuntu Karmic client with 2.5.2p1 amanda-client with xinetd.
2. The user is backup, group is backup.
3. The config file is located at /etc/amandahosts, and /var/backups/.amandahosts and /var/lib/amanda/.amand ahosts using soft link to the /etc/amandahosts file.
4. /etc/amandahosts file have following line.192.168.0.14 backup amdump.The 192.168.0.14 is server IP address.
View 1 Replies
View Related
Feb 10, 2010
I'm a big convert on using Ubuntu on my x86/x64 machines.I have a nice IBM Intellistation 185 Power PC (ppc) with dual 970 processors and 8gb of ram (and 3 SCSI 300 MB drives).I tried to install Ubuntu 9.10 on it (the PPC distro) and it gets to the boot prompt, asks me how I want to install (I can choose "live" or "install", etc..). No matter which option I choose (I've tried them all) it hangs after trying to start the kernel at "returning from prom_init".
NI've also tried other distros to see where that got me - Debian does the exact same thing as Ubuntu (which makes sense). Yellow Dog Linux actually will install and run fine(I'm writing this from Firefox 3 in YDL). Since YDL works, I'd think that a version of Debian/Ubuntu should be able to work.Any ideas on how to debug this and find out why Ubuntu won't install (or even run the Live CD?)
View 6 Replies
View Related
Feb 11, 2010
I want to install Ubuntu to HDD via USB drive but I can't see my HDD. Only the USB drive is there. I don't have any CD left to burn the ISO, so USB drive is my only choice.
View 4 Replies
View Related
Feb 15, 2010
After installing karmic with Grub2 I am unable to boot into Archlinux partition. Grub2 has removed the last line of the Archlinux boot stanza! It used to read:-
[Code]....
Following the Grub2 tutorials I have tried editing /etc/grub.d/40_custom as follows:-
[Code]....
But no luck. Only way into Archlinux is to get into the edit shell and manually add the missing line and remove other stuff not needed. I have spent hours trying to resolve this issue and I am fairly p----d off
View 2 Replies
View Related
Jan 3, 2010
I bought a magazine "Ubuntu User" that comes with the 9.10 DVD (32- & 64-bit) to avoid heavy download.
1. What is the biggest benefit of the DVD versus the CD ? Having more software on the disc right ? But how can I install additional SW without downloading ?
2. I want to install a Home Server from the DVD but I don't know how to select the server edition to install ? Do I still need to download the CD image for the server edition ? I want to be able to select one or more of the automatic server installation scripts e.g. LAMP.
View 2 Replies
View Related
Jan 26, 2010
I'm running a triple-core AMD 32-bit CPU, with two matched hard drives in a software RAID 1 configuration. The system is single-boot, running Hardy only. I have no Windoze compatibility issues to impede me. In some recent posts, I discussed my desire to add a few non-standard applications to Hardy. Well, it hasn't been working for me. I've succeeded in breaking my standard Python 2.5 installation, and the Python 2.6 that I was trying to install is also broken. After asking questions in various Python forums and not getting answers, I'm starting to think about my alternatives.
I have backed up all my hard-drive data, and downloaded Karmic. I'm running from the Live CD. I am considering a clean install, though of course I would save a lot of time if I could just upgrade.
Before I leap, I see one possible problem: Karmic has failed to mount any of my hard drive partitions, as RAID or otherwise. Should I worry? When I upgraded from Dapper to Hardy on an older (non-RAID) machine, I recall that my hard disk mounted from the Live CD just fine.
Also, am I correct in understanding that Karmic is RAID-aware right out of the box? I'm wondering if I'll have to set it up manually again. That took me a while. By the way, I didn't set up separate partitions for boot, root and home (stupid me). Can I do that after the fact during an upgrade?
View 4 Replies
View Related
Jan 30, 2010
I've just installed Karmic and get an Out Of Range message on my monitor when starting.I had to use the alternate install in order to get Karmic on there in the first place.I have an Nvidia GeForce 7600 GS, and a BenQ FP767-12 TFT.
Output of lspci;01:00.0 VGA compatible controller: nVidia Corporation G73 [GeForce 7600 GS] (rev a2)Not sure how to get my xorg.conf as I can only get to a shell. Here are (what I think are) the important bits;
Code:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "screen0" 0 0
EndSection
Section "Module"
[Code]...
View 1 Replies
View Related
Feb 19, 2010
I just installed Karmic Koala on one of my hard harddrive. The other disk has Windows XP. Previously I had a working dual-boot setup, but after problems with Ubuntu I reinstalled it. On booting, I get the following:
Code:
Grub Loading stage1.5
Grub loading, please wait...
Error 2
There is no Grub menu which might allow me to drop to a Grub prompt and evaluate. This occurs whether I boot with the Ubuntu harddrive or re-set the BIOS to boot with the Windows harddrive. If I boot with a LiveCD, I see that both my Ubuntu and Windows harddrives exist and are readable; the Ubuntu was indeed wiped clean and reinstalled; the issue is with the boot process. How can I set this up to boot?
View 9 Replies
View Related
Feb 21, 2010
On my iSCSI booted server, the standard Karmic Server install CD installs a system that won't boot.This is caused by a bug in the initscripts. This bug is solved in an update of this package. How do I get the updated version of the initscripts package on my install CD?
View 1 Replies
View Related
Mar 19, 2010
Has anyone tried to install Karmic on a laptop that has HP's new Linux on a chip OS installed? I think it's a scaled down Splashtop desktop and at least a portion of the OS is hardware based. I sure wonder what would happen if/when I try to install grub and Ubuntu.
View 7 Replies
View Related
May 24, 2010
This card has been the bane of my existence for a while. In the old days I could get it to work with Fedora using a generic video driver. A friend recommended OpenSuse because of my love for KDE.
The good news is that install went greeeeat. But after that, I once again got a black screen with a line randomly done it. Is there a way to change? I tried changing those resolution options but it didn't work. I have the Windoze driver from Dell's site. Its Dell Inspiron 5160.
View 8 Replies
View Related
Jan 11, 2010
i have Karmic installed with Wubi inside a Vista NTFS filesystem. Yesterday i did an apt-get dist-upgrade and Karmic never booted again. It won't even show the grub kernel list, it just shows some really quick text that vanishes before i can even figure out what it is and then drops to some sort of grub shell and then i can't figure out what to do.
I could boot a livecd and mount my karmic install and everything seems fine, the filesystem is clean and all that. But how do i fix it so it can boot again?
Does anyone here know wtf happened? Was there a bad upgrade or something?
View 3 Replies
View Related
