Ubuntu Installation :: Karmic And GRUB2 ?
Jan 14, 2010
I posted this about 3 weeks ago in the 'Desktop' forum and with no replies feel this may be a better area
I've got Karmic installed on my netbook which I understand uses Grub2 which is still a BETA version.
I still seem to have the original GRUB (legacy) within the file system, still have a menu.lst file but is appears to be showing the contents of grub.cfg at boot time.
What is happening at boot time, is GRUB Legacy handing over to GRUB2 at boot or is the an option for GRUB2 to hand over to Grub Legacy.
View 9 Replies
ADVERTISEMENT
Feb 21, 2010
I am having problem in grub2 fails to boot the system. I get the error:
Booting from local disk...
GRUB loading.
error: no such disk
System setup:
It's a Dell XPS400 PC with 160 GB HDD. I have a non-LVM, primary partition for the boot file system (/boot) of 200 MB. I also have seven logical volumes (LVM partitions): six for each of the /(root), swap, /home, /usr, /var and /tmp, and one vbox_win_xp_base as a raw disk for running Win XP in the Virtualbox. I went on to configure all these without rebooting the system in between. Later I also updated to the kernel version 2.6.31._20. Next day I decided to reboot my system. But then the bootloader (GRUB2 in my case) won't able to boot it and gives the error mentioned above.
[Code]...
View 3 Replies
View Related
Feb 15, 2010
I installed Ubuntu9.10 on a USB hard drive attached to my laptop. Laptop has pre-installed XP in the in-built hard-drive. Point to be noted is that my hard-drive is protected via encryption software called Pointsec.
The installation of Ubuntu on the USB hard drive went through fine and I'm able to boot Ubuntu from it.
But now the problem is, GRUB2 fails to detect the Windows XP installation.
Can someone tell me how I can force GRUB2 to boot Windows XP from hd0,0?
The GRUB1 way of configuring /etc/grub/menu.lst does NOT seem to work with GRUB2.
View 9 Replies
View Related
Feb 15, 2010
After installing karmic with Grub2 I am unable to boot into Archlinux partition. Grub2 has removed the last line of the Archlinux boot stanza! It used to read:-
[Code]....
Following the Grub2 tutorials I have tried editing /etc/grub.d/40_custom as follows:-
[Code]....
But no luck. Only way into Archlinux is to get into the edit shell and manually add the missing line and remove other stuff not needed. I have spent hours trying to resolve this issue and I am fairly p----d off
View 2 Replies
View Related
Jan 11, 2011
i havent really had a chance to ask this for a while, but im in a bit of a bind. im trying to do a release upgrade of 9.04 through to 10.10. I'm stuck at getting karmic to reboot because of a grub problem. I keep getting "error 15" file not found. Not one single forum post has helped for some reason which is strange. Release upgrades have always worked even though not recommended, but this one of all has been the worst of the lot and totally insane.
Im testing in a vmware before i do this for real on the production server, I am using a raid1 setup and boot partitions set to md0.
my fstab after the upgrade before i reboot looked like this
# / was on /dev/md1 during installation
UUID=######################## / reiserfs relatime 0 1
# /boot was on /dev/md0 during installation
[Code]....
I tried to first install grub2, i confirmed it installed and worked perfect, and therefore removed grub legacy.
Ran do-release-upgrade , it completely uninstalled grub2, and it also fails at building /initrd.img-2.6.31-22-server and adding into the grub menu therefore the upgrade fails with this error. I reinstalled grub2, the menu came up fine but trying to load a kernel gave me something like
alert ! /dev/disk/by-uid/############## does not exist.
What is the go with this ? Ive been trying to make this work off and on for 6 months
View 7 Replies
View Related
Mar 7, 2010
i initilally installed ubuntu 9.10 then installed windows 7 ,then i recovered grub2 using livecd as told in the post [URL] i did "sudo update-grub" and got windows 7 menu entry but when i select that entry windows 7 does not load but the grub2 is reloaded again.
i cant boot to windows 7.
Windows 7 have 100 mb partition "System Reserved" the grub2 points to that partition but still windows 7 not loaded.
sudo fdisk -l
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x3c3a81f5
[Code]....
View 3 Replies
View Related
May 17, 2010
I went through so many post but I haven't found the proper answer yet hope you have an Idea1. Grub2 saves only Linux OS as last selected no Windows OS2.It is possible to boot into a cdrom (drive)?
View 2 Replies
View Related
Jan 21, 2010
What's the right direction or give me step by step on how to do this?
View 6 Replies
View Related
Apr 30, 2010
My Windows Vista installation won't start after upgrading from Karmic to Lucid. If I select it on GRUB2, it leaves a blinking cursor on screen. And I tried doing the whole test disk thing and the boot info script. This is what my Results.txt file says
[Code]....
View 8 Replies
View Related
Jan 30, 2010
I've upgraded the generic kernel of my Xubuntu Karmic AMD64 persistent USB installation with the ubuntustudio realtime kernel (2.6.31.9.10). The thing is that the generic kernel is still loading as default and I don't have the option on the boot menu to choose the new one. I don't know how to edit this Grub2 version (grub-pc 1.97 beta 4).I haven't found a GUI package for this either.
View 9 Replies
View Related
Apr 22, 2011
I have just installed my ubuntu on my disk.(Windows xp is also there)..Initially i had a lot of problems with the new concept of installation of applications. So far the only successful thing i have installed is " cairo-dock". I have also successfully removed many games by removing the corresponding package files.My latest issue is with vlc plug-in.( i just need a versatile player).I tried installing the package via Synaptic package manager.> i chose: mark for installation.> then i clicked: apply.> it showed: downloading .....but finally it says an error occurred, with the following details:E: Internal Error, Could not perform immediate configuration (2) on mountallAlso at the bottom of synaptic package manager, (in the status bar or whatever..)it is given:31 packages listed,1265 installed,0 broken.103 to install/upgrade,8 to remove; 77.2 MB will be used.( i also wish to say that i found the same error [E: Internal Error, Could not perform immediate configuration (2) on mountall] when installing packages like balzarbrothers, rhtytmbox plug-in.....tell me what to do)
View 3 Replies
View Related
Apr 19, 2010
I'm trying to figure out how to get the newest build for LyX properly (ie not from building it myself) for Karmic. I do
Code:
sudo apt-get upgrade lyx , but it doesn't pick up the 1.6.5 (although it looks like it is prepared to ship out with Lucid. Any ideas on how to get it to just work? It's these minor problems with Ubuntu being slow to upgrade to the newest builds of software (ie Firefox 3.6) that makes it a little bit frustrating. Maybe I should learn to program so I can help out more...
View 2 Replies
View Related
Jul 11, 2011
I installed Fedora 15, which was my first real departure from Debian based Linux OSs. I absolutely love the new Gnome 3, and was able to configure F15 to work as I wanted it to. On rebooting I realized that there was no boot loader screen, that F15 just booted and didn't give me a choice as to which OS I wanted to use. Eventually I was able to configure grub to let me see the boot loader and added my old boot loader as a choice. This worked well, maybe not a perfect solution, but it worked. This weekend I installed LMDE (Linux Mint Debian Edition) to another HDD. LMDE uses grub2 and after the install F15 was not recognized.
Two questions: Is there a way for grub2 to see F15? or Can F15 be installed using grub2? I really don't mind re-installing from scratch.
View 10 Replies
View Related
Jan 7, 2010
Last night I booted up and got the black screen, and it would not boot. Can't find your /etc/home/fstab file or something along those lines I did not write it down. I got out my thumb drive and reinstalled Ubuntu 9.10, when I got to the partition phase I did a manual install and instructed Ubuntu to load onto /dev/sda1 /. I had previously partitioned this 160Gb drive with 41 Gb for root and 113 for my /home files and left 6.2 for Swap. Now it sees my second partition as 119 /dev/sda2 extended and Unrecognized. Unfortunately all my files are on that partition and I can't figure out how to tell Ubuntu to configure that partition as my /home . I really do not want to re-install and wipe that partition. Can gparted fix this dilemma? I thought I was being so good by creating a boot partition so that I could upgrade in the future without affecting the rest of my files.
View 1 Replies
View Related
Jan 8, 2010
I installed Windows 7 onto the unallocated 150GB space on my 250 GB hard drive with no trouble. But, when I restart my computer it goes directly to Windows and pretends that I have no Ubuntu partition at all. I realize that this is because Windows doesn't like GRUB and really hates GRUB2, but I can't seem to fix this. I downloaded the latest release of Easy BCD which gave me a promising screen upon start up where it allows me to select "Ubuntu" instead of "Windows 7" but then it goes to a GRUB command screen. What do I do here?
View 1 Replies
View Related
Jan 9, 2010
I've been trying to install karmic from a usb key onto a new zotac ion 300 itx-A board and can't get into the liveCD to test things out. The system boots to the install menu and when I select "Try Ubuntu..." the system hangs on a blinking cursor. This also happens if I choose the "safe graphics" mode.
Selecting "Install Ubuntu" has the same result. I recently used the same usb key to install karmic onto my laptop so I know it works. Searching for "karmic zotac ion" has led me to some posts about xorg not loading but that's after the initial install process and also on an alpha version of Karmic (I'll burn that bridge when i get to it). Others seem to have had no problem getting karmic installed.
I've also tried mythbuntu and 64-bit jaunty with the same results. Is there any way I can find out what's causing this hang? I can't get into a console or anything.
View 2 Replies
View Related
Mar 23, 2010
Ubuntu rocks but I am having trouble enabling PAE.
I want to do it to have my full 4Gb RAM recognized by my 32bit OS. At the moment System Monitor only recognizes 3.2Gb and the command "free -m" shows the same value.
I followed these instructions but they don't seem to work: [URL]
PS: The point is to really understand how to achieve this and not to start a debate "32bit vs 64bit OS choice"
View 3 Replies
View Related
May 6, 2010
I'm so impressed with Lucid that I'd like to revert to Karmic as soon as possible. How do I do this without losing my data?
View 6 Replies
View Related
May 14, 2010
I have been trying 10.04 Lucid for the past two weeks. Personally I think it has too many gadgets and kinky stuff. Maybe nice to play with, maybe this era just needs that kind of thing but I prefer a reliable, sturdy machine. Look at it as if I had to choose between a Hummer and an old Willy's jeep; I would choose the latter.So this Lucid thing is not really what I need, so I would like to get back to Karmic or even maybe Jaunty.How big was my surprise when I noticed on visiting the official ubuntu download pages that all there is left to download is . . . 10.04 Lucid. Even when you follow the links to what should get you other distro's you come out at ... 10.04 Lucid!!Strange, but this gives me really a "Microsoft" feeling: you shall only use the product that WE have chosen for youFrankly, this leaves me quite disappointed, and IMHO is completely the opposite of the Ubuntu way of life.
But, who am I to complaint. Luckily I still have a perfectly good working 8.04 Hardy and even a Hardy live CD, so this gives me the opportunity to upgrade now that this still is possible.And, maybe, I didn't look in the right places. But given that I am not native English speaking (like most of the world population out there), I sometimes have a lot of trouble understanding some of the more technical data I am encountered with. Being Dutch-speaking, I even went over to the Dutch Ubuntu-site. There I followed the link for downloading Karmic and found myself at ... the official Ubuntu 10.04 download site
View 2 Replies
View Related
May 19, 2010
I recently installed Karmic Koala server edition, and then did the 'apt-get ..install' for the desktop gnome, but now I'm not sure what to do to get my gui to show. I am stuck at the termanal type command line, it's asking for a sudo comman. I know a few 'sudo' commands, but I really need the gui.
View 1 Replies
View Related
Sep 7, 2010
How do I install a specific one? Or better yet, revert back to an earlier release.
I have two systems running.
2.6.31-22-generic #60-Ubuntu aphrodite release
2.6.31-22-generic #63-Ubuntu amaterasu release
I googled the #60 and #63 and it listed release names highlighted above, is this correct?
If it is, how can I install the aphrodite release?
I have one system working great (#60), while the other exhibits problems playing back 1080p video files (#63). The only HW difference that could affect the dropping frames is the 8200/8300 Nvidia chipsets (with the 8200 working perfectly) and then of course the Karmic releases. I have re-installed the system and files twice and even upgraded new releases of Nvidia drivers (195 > 256) with no success.
My next step is to try and install the same exact release of Karmic if indeed there is a difference between #60 and #63.
My next step might be to use clonezilla and clone the OS (Root) and try that. But then the chipsets for sound are different as well as the ehternet chipset. But that shouldn't impair the video.
View 3 Replies
View Related
Jun 9, 2010
I have decided to dual boot again because I found a old hard drive laying around.
primary drive: sata 500 gb
ubuntu 10.4 64 bit installed with
boot
[code]...
secondary drive: 120 gb ide drive with xp installed. xp was installed first and wrote the mbr to sda1. I then installed ubuntu 10.4 and it overwrote mbr on sda with grub2. I have tried every combination of the 40_custom script for xp I have found here on the forums but to no avail. The 30_OS probe never seems to see it either. Grub 2 will not see xp. I have it in the menu from the custom_40 but it just reboots the system when I choose it. Any advice is greatly appreciated as I am ready to go back to legacy grub which only took 5 minutes to dual boot last time I did dual boot. I want to give grub2 a chance, since it supposed to be better, but I am getting frustrated.
Here is the output from the boot info script.
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #1 for /boot/grub.
=> Windows is installed in the MBR of /dev/sdb
[code]....
View 8 Replies
View Related
Jan 7, 2010
I installed Karmic on a newly formatted hd. Xp is on another. When I boot, KK comes with no problem. But, I get and error 13 when I try to access xp. Here is the result of the boot info script.
[Code]....
View 2 Replies
View Related
Jan 8, 2010
The sound is an onboard Realtek AC97 chip on my motherboard. It worked absolutely fine on my 9.04 Jaunty setup. My machine is dual boot with Windows XP and the sound is fine on XP, so it's not a hardware issue. Karmic seems to think there is no audio device present at all, which is obviously not the case.This is an AMD 64-bit machine running the x64 edition, although I doubt that has anything to with the problem. Everthing else in the installation went perfectly and the GNOME desktop seems significantly quicker too.
View 9 Replies
View Related
Jan 11, 2010
I have been getting squashfs errors in the live usb created by various means(unetbootin,usbcreater,pendrive linux software).
There seems to be no error in my media or my hw. I have tried both 32 and 64 bit versions and the md5 sums of both match with the hashes given online. I havent yet tested with a compact disk, but i am sure the hw is working fine (it just booted 9.04 from usb..)
I have tried a few boot options [URL] to no avail. Also by turning off the quiet mode during boot, I see that the a few errors are "Unable to read from /dev/sdb" which should be the usb drive itself.
I will try a CD now, but my cd drive is not working. I hope to get a usb drive and boot from it.
View 2 Replies
View Related
Jan 17, 2010
I like ubuntu and want to start using it more, but because of a work website that I need to access (developed for IE and only IE or Firefox running IETAB has full functionality) , I still need to use XP. Is it better to install Ubuntu on a partition or install within Windows and use Windows loader?? I see the two choices when using the Ubuntu CD I made. I already have XP Pro SP3 installed on my thinkpad T60 with dual core CPU and 3G RAM What are the advantages or disadvantages?
View 9 Replies
View Related
Jan 25, 2010
I REALLY want cube atlantis how to do so
View 1 Replies
View Related
Jan 26, 2010
When Karmic came out I made the decision to leave OSX and become fulltime linux. The one thing I took for granted is OSX's ability to resize a partition to create space for another partition. I am wondering if this is possible? The reason is I want to put all my storage data (i.e. papers, pictures, music, etc) into a partition separate from the OS. I seek to do this so that I can test out Lucid and subsequent alpha's/beta's.
View 5 Replies
View Related
Feb 6, 2010
i use Fluxbox (Mint in Karmic, but after few tweaks and updates i have to reinstall system-but i couldn't even make with gparted and usb-creator startup disk, so i used virtual machine in Mac OS to make some older version (Mint 7 XFCE).BUT, then i discovered that i can not even load the system from USB-although it was all set in bios to startup with USB Stick. How can i persuade my dell mini 10v to start up from live USB Stick.
View 7 Replies
View Related
Feb 8, 2010
This was my first attempt at compiling a program from source. Maybe I should have picked something easier but I am trying to install gutenprint (formerly gimp print)so I can use my new Epson scanner/printer.Should I remove this thing and start over?
View 1 Replies
View Related
