I have a disk partitioned, with windows on on one partition, ubuntu appears to be installed on an extended partition ... and iv run out of space... i need to extend the partition that ubuntu is installed on by 40gb
I have tried downloading gparted... burning it to a cd and then booting from the cd .. but i get upto a message that says use at your own risk then my system just reboots ....
I have 60 plus GBs of free space left in my Vista partition that I would like to devote to my ubuntu install.
View 9 Replies View RelatedHere is screenshot showing my current partition in Gparted.
Screenshot-1.jpg
What I want to do is shrink the one (Ubuntu) and extend the other (XP) so that that they are more or less the same size. How?
I know there are probably alot of threads about lvm however they aren't addressing my problem. I want to extend the PEs available in a VG. This VG already has LVs and those are active and mounted. From what I read from the manpages of pvresize this should be perfectly possible.
Code:
pvresize resizes PhysicalVolume which may already be in a volume group and have active logical volumes allocated on it.
I did the following steps and wonder if anyone has the same issue. THe machine where I am talking about is an ESX VM.
1. Resized the vmdk in ESX (+1G)
2. Let the kernel reread the device geometry: echo 1 > /sys/block/sdc/device/rescan
3. fdisk shows me the new size... so far so good
4. I resize the partition using fdisk (remove, recreate) and gave it the 8e type (lvm)
5. wrote config to disk
6. executed partprobe
7. pvresize /dev/sdc
Here it goes wrong! Pvresize says in the verbose output it sees the same size however at the end it says the pv has been resized. I have seen when I put volumes "offline" using vgchange -a n vg on a test machine, and then try pvresize it seems to work ok. This is against what is in the manual as it says pvresize should work on online mounted volumes.
Is there any way to use unallocated space to extend a partition that isn't close to that partition? there is an image attached, I can extend /dev/sda2 but not /dev/sda1 ( the one that i want to) I used the live cd to run gparted.I had to move /dev/sda2 to to the right and then extend /dev/sda1
View 1 Replies View RelatedI would like to know if is possible extend a partition using one disk. I have 50 GB on /dev/vdf2 and would like to add on:
/dev/vdc1 50G 6.4G 41G 14% /home3
And this partition will have 100G of space..
How can I extend /home or / partition through LVM. Is this possible ?
View 8 Replies View RelatedI have created one partition. Now I want to extend that partition without formatting it.
View 3 Replies View RelatedMy linux server working with LVM partition and with /boot partition, now my /boot partition is full, now i need to extend my boot partition. can i know how to do it, without any data loss.
View 5 Replies View RelatedI have my harddisk partitioned with fdisk. It has seven partitions. I have some important data in my /home partition. The /home partition is almost full. I want to extend the size of /home. Mind you I'm not using LVM. Can I use LVM now and add another harddisk to extend the /home partition. Will I lose my data. Or do I have to re-install linux?
View 3 Replies View RelatedI want to run gparted off the cd so that I can extend the ubuntu partition of my computer...I hdownloaded the gparted iso file and burnt it onto a CD...but how do i run the software?.... there appears to be 3 folders on the cd (isolinux, live and syslinux) and two other files 'copying' and 'g-parted live version' - these two are both text files...
View 9 Replies View RelatedI have an Asus eee, it has a solid state drive which has been partitioned with a 4GB and 8GB partition. I installed Fedora 14 onto the 4GB partition but I am running out of space. I have formatted the 8GB partition with ext4 but I am unsure the best way to create more space for the default installation. Can I extend my / partition onto the 8GB partition or possible move the /swap partition onto it?
View 5 Replies View RelatedHave VMWARE workstation 7. Have to extend partition /dev/sda1 mounted to /home/user
1. Originally /dev/sda was 10gb I've extended device via VMWARE to 30gb.
2. When I do: fdisk /dev/sda it tells me that /dev/sda 30gb
3. when I check: df -h /home
it shows 10GB
4. How I can make Linux see the 30gb at /home/user?
I am dual-booting 11.04 alongside windows 7. I shrunk my w7 partition, and would like to extend my ubuntu partition to fill up the remaining space. When I boot from GParted live cd, and attempt to 'move/resize' my ubuntu partition, it simply fails. It doesn't really give an error message either, simply 'failed to move/resize [partition name]'
View 4 Replies View RelatedI also tried to use Gparted but I couldn't install it :(
My root partition is completely full and I want to extend it.
df -h :
fdisk -l
I have a dual boot Ubuntu 10.04 and Vista laptop.
My Ubuntu partions /dev/sda4 extended, which contains a /dev/sda5 ext4 and a /dev/sda6 ntfs partition.
Vista is on /dev/sda2 ntfs. I would like to wipe vista out, turn off dual boot (if possible) and use the space taken by vista to extend my /dev/sda6 ntfs partition in ubuntu.
i want to extend my existing partition size,but it should do it without formatting my operating system.i don't have the solution.Is this possible?if possiblsolution.hope somebody should give the answer
View 5 Replies View RelatedI've 80G hard-disk with dual boot ( XP with 5.5G and Ubuntu 10.10 with 4.5G ). After recent updates there is only 1G of space left on Ubuntu.I've 3 more drives with around 25G left and want to extend Ubuntu by another 10G.How can I do that?
View 9 Replies View RelatedI have installed my Fedora on a LVM2 group and alocated a total of 10 GB. Which of course is abusrdly and ridiculously low space. As a matter of fact I did even more stupid thing - I allocated 4 (four) gigabytes for /swap !
I am complete novice in Linux and fedora, but I want to extend my /root lvm drive with at least 20 gb.
I burned parted magic on a CD and tried to manage the LVM2 grop, but it said LVM2 was not supported in parted magic. And so I tried the Fedora Partition Manager and got lost in what and how. I tried reducing the /swap space and increasing the / space, but failed - I could only select zero Mbytes for swap space, and had the only option of decreasing space for /, which is really not what I want to do.
What I want to do is extend the space for the whole LVM2 Logical Group , which is now 10 GB total for / and /swap. Or at least I'd like to reduce my /swap size and increase my / size.
I have a brand new thinkpad X301 with 4GB of RAM and thinking of getting fedora 11 on it. The plan is to have it triple boot with vista/seven and hopefully OSx86. I am aware of the 4 primary partitions limit on an MBR disk. I was thinking of having a swap file instead of swap partition and not creating a boot partition as well. If I install the boot loader(GRUB?) on the root partition will I be able to boot it without any problems by using vista's boot loader?
Or Maybe I should install GRUB on the MBR and add all the other operating systems on it? Does anyone have any objections for not creating a swap partition or a boot partition? When comes to desktop environment I've been using KDE in the past, is there any major advantage of using Gnome over it? KDE seems to look really nice on fedora where Gnome is maybe more stable?
I'm running xubuntu 10.10 on an old toshiba P3 laptop and I'm very new to linux but am learning day by day. How can I either extend the login session or stop it auto logging me out as I want to leave a program running continuously. I've searched all over the web but can't find anything.
View 5 Replies View RelatedSometimes I am watching PBS movies on line... and from a period of inactivity, Ubuntu log me off automatically from my movie to the password typing page. How can I extend the time, to avoid being log off automatically. Which command should I use to control that time?
View 2 Replies View RelatedTwo days ago I repartitioned my laptop HD and added the latest Ubuntu (2.6.35-25-generic) to the existing Vista and existing Ubuntu (2.6.32-28-generic via upgrades from 9.14(?)). Prior to this install it was using Grub with menu.lst from the old/upgrade Ubuntu. After the install the boot menu labels the partition with Vista as the Windows Recovery partition and the recovery partition item is no longer present.
At first I wondered how I could get Vista to boot. I found that SuperGrub cd would boot it OK. Then, it dawned on me that the boot menu item was not the recovery partition, but instead the Vista OS partition mislabelled . Vista loads just fine from it. The recovery partition is no longer listed as it was with Grub/menu.lst. SuperGrub will not boot the recovery partition, showing an error "missing BOOTMGR".
'os-prober' produces--
root@Toshiba:/home/deh# os-prober
/dev/sda2:Windows Recovery Environment (loader):Windows:chain
/dev/sda7:Ubuntu 10.04.2 LTS (10.04):Ubuntu:linux
[code]...
I edited boot/grub/grub.cfg so the boot menu item is labelled correctly, but suspect that it will revert back when there is an upgrade.
i have instaled ubuntu 11.04 wubi on my pc with windows 7. i installed and everything was going ok i navigate on ubuntu already. but the problems star here i went on my ubuntu to the partition section and i format my windows partion to be the home partion and changed the nfts to ext, i did the upgrades but i forgot that theyr running yet and i restart my computer when it boot again it gaves me an error:
try (0,0) : nfts5 : wubildr
try (0,1) : ext2 :
and the windows7 says that i have to instal again. so i went to another pc and i made a cd boot and a pen boot. i burned the iso (downloaded from the ubuntu oficial site the 11.04 32 bit version) image to the cd and pen drive prperly, i adjust my boot options to star from usb or cd rom and nothing im struck.
This is my partition table:
/dev/sda1 1 4255 34178256 83 Linux
/dev/sda2 4256 4437 1461915 5 Extended
/dev/sda3 * 4438 9964 44395627+ 7 HPFS/NTFS
[code]....
using onboard windows disk management i have made 75gb unallocated to add to the aforementioned ntfs data partition. but, after resizing extended partition, will i need to fix grub even though i will be adding the unallocated space to a storage partition and not the ubuntu boot partition?
View 4 Replies View RelatedI was wondering what the best way is to partition multiple distros to share one home partition.
View 8 Replies View RelatedI have an Acer Aspire Netbook running a dual boot with Xp and Ubuntu Netbook Version (Lucid Lynx if I am not mistaken?) Anyway I plan on selling this netbook and I need to remove the Ubuntu Partition and go back to just a full Windows Xp partition with it's recovery partition also.
View 2 Replies View RelatedI tried installing Ubuntu 10.04 LTS on my girlfriend's lenovo using a live disc. First we tried it out to show her the wireless would work fine (her previous lenovo was not ubuntu friendly at all). She's interested in keeping her windows 7 partition along with the lenovo recovery partition, so I tried doing a dual boot install. I manually moved the cursors setting the disk space on each partition, and we allowed Ubuntu to do the rest. Much to my dismay, the installation failed.
I've done some reading over the internet, and I think in our case it would be best to use a Wubi installation. We're interested in using 10.04, so where can we find a wubi installer of Ubuntu 10.04?
Also, any ideas why the installation might have failed? The iso was downloaded off the ubuntu main site, and we burned it using infrarecorder.
I currently have both Ubuntu 9.10 and Windows XP installed on my PC. I want to remove the Ubuntu partition and leave the Windows partition. The question that I have is that when I remove it, Grub will go with it. Will that mess up my Windows partition?
What I need to do is remove Ubuntu and add the hdd space back to the other partition. I just don't want Grub's absence to keep me from being able to load Windows.