After installing ubuntu 10.4 I tried to update but it caused some error as reported as follows. I have already tried to googling the solutions but it seems that there's no right one for me.
View 2 RepliesWhen i install software with the install/delete software program or when i update ubuntu, i get an error.
I was able to update and install software a few days ago. But now i get this weird error:
Code:
I had this issue with Fedora Core 13, so I switched my laptop back to OpenSuse and continued to have the problem. I can do a host lookup for software.opensuse.com and I get a correct response ...
Code:
linux-edxs:/etc # host software.opensuse.org
software.opensuse.org has address 195.135.221.150
linux-edxs:/etc # host download.opensuse.org
download.opensuse.org has address 195.135.221.134
Firefox works. Thunderbird finds my mail servers just fine. SSH works. But then when I try to do anything involving software updates or installation, I get ...
Code:
linux-edxs:/etc # zypper update
Retrieving repository 'Updates for openSUSE 11.3 11.3-1.82' metadata []
Download (curl) error for '[URL]':
Error code: Connection failed
Error message: Couldn't resolve host 'download.opensuse.org'
I've seen others here post queries about this, and I'll tell you what it was in my case: our DSL modem's DHCP server returns its own IPV4 address as the DNS server. When I looked at /etc/resolve.conf, I saw "nameserver: 192.168.50.254" on the last line -- the IPV4 address of our DSL modem. I manually inserted "nameserver" lines for our ISP's two actual DNS servers, and everything magically started working. Why this should confuse some software under Linux, but not other software, is a mystery. It also seems to be Gnome-specific (I didn't have this problem with OpenSuse 11.3 and KDE 4).
Ask if they're using Gnome, and ask them to check resolve.conf. A lot of DSL modems and home/small office routers return their own IP address (i.e., the same as the gateway address) for the DNS server on a DHCP query. The solution is to manually edit resolve.conf and put in your ISP's DNS server addresses manually. Incidentally, just my opinion, but Network Manager needs to make this an option. Under Windows, for example, you can select "automatically assign DNS" or you can enter them manually, even if you're using DHCP. It'd be nice if Network Manager permitted that.
When I try to update my packages, or install new packages, I get this error:"E: /var/cache/apt/archives/libglib2.0-0_2.26.1-0ubuntu1_amd64.deb: subprocess new post-removal script returned error exit status 1"I tried the "sudo apt-get install -f" but it didn't work.I'm running 10.10, on a Asus laptop
View 3 Replies View RelatedI just installed Ubuntu last night parallel to windows vista ultimate (no problems). My biggest problem is that when I tried to install the nvidia display drivers, I somehow downloaded a server based driver (and am having amazingly difficult problems). I use a dual monitor set up (both are plug and play LCD displays) and i'm not too worried about aesthetics but rather, performance. I downloaded the correct driver but now I don't know how to install it. Is there a way to uninstall this server driver?
View 1 Replies View Related1.) I made a few updates that I found a website my friend sent me: http://blog.thesilentnumber.me/2009/...nstalling.html
however, when I would go to enter the APT line in the other sources in the software sources windows then close and reload it I would get the following error message code...
Some index files failed to download, they have been ignored, or old ones used instead.
I also attached a screen shot of the error message window.
2.) I don't know if i should post another issue I had, but when i try to run GNUnet it says that Daemon is not running. I'm not sure what that is all about.
whenever i try to update or install a new software this problem shows up Resolving ftp.3drealms.com... failed: Name or service not known. wget: unable to resolve host address `ftp.3drealms.com' --2010-05-23 12:20:14-- ftp://ftp.3drealms.com/pub/share/1rott13.zip => `/usr/share/games/rott/1rott13.zip'
View 3 Replies View RelatedFollowing are the error details..
W: GPG error: http://ppa.launchpad.net jaunty Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY C174A7B143CBFCC0
W: GPG error: http://ppa.launchpad.net jaunty Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY CE90D8983E731F79
I installed Ubuntu 10.10, now I've been trying to add some applications like docky and jdownloader but always I got this message error :
[code]...
how to solve these and how to find a way to install my applications.
Getting error when updating from update manager and also checking for upgrades in synaptic package manager...The below error is of update manager...However sometimes i dont get this error and update works.
[Code]...
i have using ubuntu 10.10 from past 3 months and about a week before upgraded to 11.04. The upgrade was a successful one and everything was back to normal, was enjoying unity. upgrading disabled most of the ppa's in the source list and later i enabled them and still everything was okay. yesterday suddenly when i clicked on the ubuntu software center it was just showing as if it was still processing the source list but after sometime it started giving me the below error: "E:Type 'rc' is not known on line 3 in source list /etc/apt/sources.list.d/geod-ppa-geod-natty.list"
View 7 Replies View RelatedUsing Update Manager this morning, I received the following error message while it was updating Firefox:
An error occured: E: /var/cache/apt/archives/ubufox_0.9.1-0ubuntu0.10.04.1~mfn3_all.deb: trying to overwrite '/etc/xul-ext/ubufox.js', which is also in package xul-ext-ubufox 0 What action should I take now?
My kernel is not updating and I'm getting errors like.........
[Code]...
for some reason my first updating was interrupted and from then i cannot update. i get the following message:
rpmdb: PANIC: fatal region error detected; run recovery
error: db3 error(-30974) from dbenv->open: DB_RUNRECOVERY: Fatal error, run database recovery
error: cannot open Packages index using db3 - (-30974)
error: cannot open Packages database in /var/lib/rpm
CRITICAL:yum.main:
Error: rpmdb open failed
[root@laptop etc]# yum repolist
[Code]....
I'm trying to update Ubuntu 10.04 after a clean installation, it downloaded 245 files,and there is an error in the indexes of the 2 last packages:Failed to fetch [URL] difiere (bad size) Failed to fetch [URL] difiere (bad size) This happens even changing the repository to main server or another through "Software origins".Update-manager doesn't conclude the update because it can't download all the packages.
View 1 Replies View RelatedI upgraded my ubuntu 10.04 to 10.10 after its release. It was working fine. But today I saw its giving an error while upgrading. I am not very much efficient in ubuntu so cant understand why this error is. It is giving as failed to download repository information. check your internet connection. But my internet is working fine.
[code]...
I got a problem while updating KDE from 4.1.2 to 4.2. In our college we can't download more than 20MB officially. So I'm unable to get kdegames which is 32MB from Konsole so I downlaoded it using proxy and I copied it into the /var/cache/yum/updates/packages/ folder and now using this command (yum groupinstall 'KDE (K Desktop Environment)').
I tried to update to KDE 4.2 using Konsole but it is showing:
Error Downloading Packages:
6:kdegames-4.2.0-1.fc10.i386: failure: kdegames-4.2.0-1.fc10.i386.rpm from updates: [Errno 256] No more mirrors to try.
And even by double-clicking the KDEgames rpm file I'm unable to install it is saying GPG (I'm not sure GPG or not, start with G i think) Key missing so it is taking too much time and not doing anything.
[code]...
Failed to read mirror file. it eventually shuts down saying "reverting to original state"?
I got this error during updating backend data server for evolution. "could not do simulate: gnome-panel-2.30.0-1.fc13.i686 requires libedataserver-1.2.so.11 : Success - empty transaction"
View 2 Replies View RelatedI have installed ubuntu on my system and now when i have updated it through internet, it is not booting up.
When i boot a black screen appears and it says "initramfs"
I dont understand what commands i should use to rectify this error and boot my system.
Linux (Ubuntu) is not providing any updates for Java Runtime Environment! According to what I find on my computer, I have Java build 1.6.0_15-b03. Ubuntu Software Center is indicating 6-15-1 (sun-java6-bin). I have manually downloaded JRE 6u17 and 6u18 from Sun. However, I have not - as yet - attempted to install/update Java myself. First, why isn't Linux providing us end-users with the updates as they are published? I thought that, for the sake of ensuring "STUFF" is up-to-date and SECURITY reasons, that the (or some other place) would be providing updates as they occur. I have just started Ubuntu - my ranking - "kindergarden at best"! I still have not been able get the "handle" on the "command line (codes)" structure and usage. I am so use to the Windows way of installing, updating, and upgrading software that Linux (Ubuntu) is causing quite a bit of consternation; just plain frustrating and confusing! I have been trying, and seeing, so-called instructions of how to install/update Java but there are just too many "assumptions" being interposed by the author(s). I just wish, and want, straight forward, step-by-step instructions in the "how to" department - written in plain language, for the complete novice (brand new to Linux). So, here's my question ... how do I manually update/upgrade (or install) Java RE on Ubuntu? Do I have to remove, add, change anything? I'm sure that there are others in the Linux world that are in need of some straight forward assistance. I want to continue using my Ubuntu and honestly, would like to be more proficient in it's use. But in the meantime.
View 1 Replies View Relatedwhen ever i give yum update am geting this error. failed to use search generator: failure:repodata/318b9912817ec3309c6defc47d79e878c52a21fd1457d191bb ff060fdb7f7f8d-primary.sqlite.bz2 from rpmfusion-free-updates: [Errno 256] No more mirrors to try. I was trying to install tomcat using yum. Is there any way i can install tomcat other than yum utility. I downloaded he zip folder for tomcat which i downloaded from apace tomcat site.
View 2 Replies View Related[code]...
How do I fix this?
I saw this post [URK] and I'm having the same problem up to the point of installing/updating aptitude. Here is the background: I logged in and just recently added another monitor and used Multiple Monitors from the software downloader to manage them. Last night they worked great and I was using the extended desktop. When I logged in this morning they were cloned and I couldn't get the buttons "clone or extend" to not be grayed out. I couldn't have cared less since I was just logging on to check email and things so I looked around for a second in the settings and was sidetracked by the display/window options. I was scrolling through the different themes and colors and then all of a sudden BAM! back to the login screen. I was using the arrow down key to scroll and like I said, immediate toss to the login screen. I made O.o? that face and tried to login and then I kept getting kicked back the same as the post I linked above. So...
I press ctrl+alt+f2 and log in. I see Welcome to Ubuntu! back to the aptitude step, when I run sudo aptitude update && sudo aptitude reinstall gdm I return sudo: aptitude: command not found. So when I do: sudo apt-get install aptitude I return E: unable to fetch some archives, maybe run apt-get update or try with --fix-missing?
Recently I have facing issues with updating or installing packages on my lucid. sudo apt-get update spits the following
[Code]....
I updated my system to the latest version - 5.5. After that I could not install VirtualBox. I was thinking, trying to fix, googling... it over for hours... Finally I found the reason. VirtualBox installer searches for the source kernel at /lib/modules/2.6.18-194.17.4.el5/build, and it can not. Look into /lib/modules, I have some kernels such as:
- 2.6.18-194.17.4.el5
- 2.6.18-194.17.4.el5debug
- 2.6.18-194.17.4.el5xen
... and more old ones.
At that time, I booted on 2.6.18-194.17.4.el5 kernel. But inside that directory, there is no build or source (directory/ file). Then I looked into 2.6.18-194.17.4.el5debug, and it had. So I typed: ln -s /lib/modules/2.6.18-194.17.4.el5debug/build /lib/modules/2.6.18-194.17.4.el5/build
I've been trying to install the latest version of Emacs from source but I'm running into a trouble. The commands "./configure" and "make" work just fine. However, when I run "sudo checkinstall" I get a message saying that makeinfo is missing:
Code: makeinfo is missing - cannot build manuals make: *** [info] Error 1 **** Installation failed. Aborting package creation. Cleaning up...OK Bye. What is Error 1
After a recent installation and update I am having problems connecting to the internet even after following the steps in [URL]... Configure a network card in Suse/openSUSE...." It doesn't always connect when I boot and there is no connection icon on the panel nor the KDE desktop. Can someone assist me with this problem?
View 9 Replies View RelatedQuote:
kai@kai-laptop:~/acerhk-0.5.35$ make
make -C /lib/modules/`uname -r`/build SUBDIRS=/home/kai/acerhk-0.5.35 modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.32-21-generic'[code]....
I don't get it. Tried so many ways...
I download wubi from [url] and when i install there is error. looks like this.
View 1 Replies View Related