When I try to update my packages, or install new packages, I get this error:"E: /var/cache/apt/archives/libglib2.0-0_2.26.1-0ubuntu1_amd64.deb: subprocess new post-removal script returned error exit status 1"I tried the "sudo apt-get install -f" but it didn't work.I'm running 10.10, on a Asus laptop
View 3 RepliesI've been trying to fix this problem for quite a few days now and have done a lot of searching on these forums, Linux Mint Forums and some others Google lead me to and have has some success, but am now stuck.I have posted a thread on this same topic on the Linux Mint Forums, but have had no success (if you want check it out at:URL...Originally I received error messages when trying to update involving certain repositories which couldn't be accessed (because they either didn't exist or had been moved) and I hunted these down and changed or removed them.
I have done much searching, etc. and cannot find any broken packages. I have tried many many different commands which have mostly done nothing.I seem to be in a similar boat to this person: URL...
Recently I have facing issues with updating or installing packages on my lucid. sudo apt-get update spits the following
[Code]....
After tomboy was gone today from my machine and does not appear in synaptic, I tried to install gnote and got this error. what should I do?
Code:
gnote:
Depends: libboost-filesystem1.40.0 (>= 1.40.0-1) but it is not installable
Depends: libboost-system1.40.0 (>= 1.40.0-1) but it is not installable
Depends: libpanelappletmm-2.6-1c2 (>= 2.22.0) but it is not going to be installed
Depends: libpcrecpp0 (>= 7.7) but it is not installable
E: Broken packages
After recently installing Linux Mint 10 I have tried to install the updates it says and everytime it tells me I have to fix broken packages first. I have been into something that tells me there is no broken packages. What can I do?
View 4 Replies View RelatedI've been trying to install a few programs with the basic Debian repositories on my Jessie edition, but I keep getting a "broken packages" error and "cannot be installed" error, and the programs won't install.
I went to other repositories, e.g. Mint and Ubuntu, and with these included in my sources.list file, I was able to install the desired programs.
If the programs are listed in Debian and the dependecies as well, why would they not install?
So i created a USB startup disk on my 32g flash. Worked fine until I went to update the packages on it. Now it wont boot up and it also fails when trying to install on another machine.
View 1 Replies View RelatedI recently had to rebuild my computer with a new HDD and decided to load the new Ubuntu 10.04 which seems to work great. I was in the middle of downloading packages from the Ubuntu Software Center when the computer decided to reboot in the middle of downloading 6 packages. I went to the Synaptic Package Manager and it said to run "sudo dpkg --configure -a Here is what I got when I did that. What do I do next to fix and continue downloading the corrupted packages?
[Code]....
Ok, so I just finished correcting my driver issue with my wireless card when I'm struck with another problem....after gaining access to the net and updating my packages, ubuntu fails to boot up. It freezes at the boot screen where it runs the 5 orange dots with the ubuntu logo.
View 1 Replies View RelatedI have a broken package and can't seem to fix it. Now, nothing can be downloaded from synaptic. I get the following error message:
Processing triggers for software-center Setting up courier-mta (0.61.2-lubuntu3) * Starting Courier mail server. Starting Courier mail server. invoke-rc.d: initscript courier-mta, action "start" failed. dpkg: error processing courier-mta (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: courier-mta E: Sub-process /usr/bin/dpkg returned an error code (1) How do I fix this?
I am trying run an update but I get an error "Fix broken package first".I then went into synaptic and fixed the broken packages and tried to the update but I had the same problem still.
View 9 Replies View RelatedI got a problem while updating KDE from 4.1.2 to 4.2. In our college we can't download more than 20MB officially. So I'm unable to get kdegames which is 32MB from Konsole so I downlaoded it using proxy and I copied it into the /var/cache/yum/updates/packages/ folder and now using this command (yum groupinstall 'KDE (K Desktop Environment)').
I tried to update to KDE 4.2 using Konsole but it is showing:
Error Downloading Packages:
6:kdegames-4.2.0-1.fc10.i386: failure: kdegames-4.2.0-1.fc10.i386.rpm from updates: [Errno 256] No more mirrors to try.
And even by double-clicking the KDEgames rpm file I'm unable to install it is saying GPG (I'm not sure GPG or not, start with G i think) Key missing so it is taking too much time and not doing anything.
when I try to install anything using the Ubuntu software centre, I get the following message Requires installation of untrusted packages The action would require the installation of packages from not authenticated sources.
View 1 Replies View RelatedI'm trying to update Ubuntu 10.04 after a clean installation, it downloaded 245 files,and there is an error in the indexes of the 2 last packages:Failed to fetch [URL] difiere (bad size) Failed to fetch [URL] difiere (bad size) This happens even changing the repository to main server or another through "Software origins".Update-manager doesn't conclude the update because it can't download all the packages.
View 1 Replies View RelatedDuring my recent upgrade from 8.04 to 10.04, I got a few error messages concerning the flashplugin-nonfree not installing correctly. A user named carlee helped me get flash working over on the absolute beginner forum, but I've got a related problem still unresolved.Update manager is convinced that my perfectly working flash installation is broken, and insists I update it.However, the update fails every time, telling me E: flashplugin-nonfree: Package is in a very bad inconsistent state - you should reinstall it before attempting a removal.
Opening synaptic, I cannot select the reinstall option for the plugin. Removal and complete removal are my only options, and both give the above error. More problematic, I cannot de-select the flash plugin entirely. It MUST be part of any other package update through synaptic (if I wanted to re-install avant window navigator, for example). And since the flash removal operation fails, synaptic is effectively non-operational.How can I convince my update manager that my fully operational flash is just fine the way it is?
Am trying to upgrade from karmic 9.1 to lucid 10.04 and have the problem that as part of the upgrade I get a report that some packages are broken. As suggested posting the relevant files APT and MAIN Logs from the /var/log/dist-upgrade below.
View 4 Replies View RelatedI installed java and my computer went off in the middle of the process and some packages didn't install correctly. I decided to reinstall them but it doesn't let me. I have tried to remove them using the synaptic manager, I also tried to remove them manually. I've tried: apt-get -f install also. I tried to re-install it using:
sudo apt-get install sun-java6-jre sun-java6-plugin sun-java6-fonts
but this error comes up
Errors were encountered while processing:
sun-java6-jdk
sun-java6-fonts
E: Sub-process /usr/bin/dpkg returned an error code (1)
I am tried to install Sopcast for Ubuntu Netbook remix but keep being told I have broken packages but I can't find any in synaptic or ubuntu tweak. I think I had a failed install before I found the frontend package on ubuntu tweak but I cannot find where the problem is.
I am running ubuntu on an Acer Aspire One as my sole operating system.
Here is the apt.log from running 'do-release-upgrade'. apt-get upgrade runs without issue and I have disabled all of the extra repos I had (opera, tor, lucid-propsed, chromium). My system is otherwise 100% up to date with apt-get dist-upgrade and apt-get upgrade. I have already purged all of my PPAs using 'ppa-purge', but it looks like there are remnants of xorg-edgers in there somewhere: [URL]
View 4 Replies View RelatedUpdate Manager tells me it has updates. So I close what I am doing with VirtualBox and a Windows Client and I tell the Update Manager to go ahead. But it stops, says I've got OpenOffice and QuickStarter both running. Not so, at last not to my knowledge. I try again, and it tells me I have a broken package, and to use the 'Broken' filter to find it. Where is the 'Broken' filter? And even if I work that out, what should I do about a "broken" package? So I look online. Only references to "Broken" packages are with respect to Windows. Windows is a shut down client, and VirtualBox has been shut down.
So I try the recovery mode on a reboot. This reports I have 15 broken packages, all to do with OpenOffice. I select Fix Broken Packages, and it keep stopping to tell me that OpenOffice and QuickStarter are both running, and I need to deal with that. How? A restart and effort to fix broken packages did no good. I look online again, and this time I run down where someone writes you can follow a link, and what you get there will do the trick. Only the link goes nowhere, so it has been moved or deleted.
I have been upgrading 10.4 to 10.10, but in the middle of the new package download my computer turned off (outage). Now Ubuntu won't restart the upgrade or install the packages already downloaded; it tells me it "Could not determine the upgrade" and that unresolvable problems occurred, caused by held packages. How can I reset things to restart the upgrade?
View 4 Replies View RelatedI keep on getting this red " - " icon on my panel and I try to perform the upgrade it prompts me to do. But it says that there are 3 broken packages i need to fix with the "broken filter". How do I fix this so I can upgrade?
View 2 Replies View RelatedI want to install aptitude using apt-get, but some problems happen like this:
The following packages have unmet dependencies:
aptitude : Depends: libapt-pkg-libc6.10-6-4.8
Depends: libept0 (>= 0.5.30) but it is not going to be installed
E: Broken packages
(before do this, I have used command apt-get update and apt-get upgrade)
I was installing some packages using the generate download script in synaptic and 'sudo dpkg -i -R ...' because I don't have my own internet connection at home but somewhere else. I think I got carried away a little and installed some packages that have some dependency issues. Now I have three broken packages that need to be removed, but I don't want them to affect (remove) other packages which would be marked whenever I try to mark them for removal, for fear that their removal might affect other functions. I think my machine was just fine before I started to fumble with individual dependencies; that's why I don't what the other dependencies removed. My question is how do I remove those dependencies only using the terminal without removing the others?
View 3 Replies View RelatedI tried to upgrade to 10.04, but did not succeed. Error: You have held broken packages.
View 2 Replies View RelatedWithout knowing the consequences I added the Sid repository to Wheezy (installed version) in order to install some software. Only much later I discovered that this generated me some mess which does not allow now to install additional software due to library conflicts.
I tried to install some packages needed to build the PhantomJS but here is what I got:
Code: Select allReading package lists...
Building dependency tree...
Reading state information...
build-essential is already the newest version.
g++ is already the newest version.
g++ set to manually installed.
[Code] ....
Is there a way to clean up the mess that Sid introduced and revert back to the Wheezy versions?
I have an old backup, so it would take me much more time to reinstall/reconfigure certain software, so I am looking to alternatives.
Is there a way to check all the packages and find all the potential conflicts and then a way to restore the original Wheezy content?
After installing ubuntu 10.4 I tried to update but it caused some error as reported as follows. I have already tried to googling the solutions but it seems that there's no right one for me.
View 2 Replies View RelatedI just installed Ubuntu last night parallel to windows vista ultimate (no problems). My biggest problem is that when I tried to install the nvidia display drivers, I somehow downloaded a server based driver (and am having amazingly difficult problems). I use a dual monitor set up (both are plug and play LCD displays) and i'm not too worried about aesthetics but rather, performance. I downloaded the correct driver but now I don't know how to install it. Is there a way to uninstall this server driver?
View 1 Replies View Relatedwhat this means? installArchives() failed: Preconfiguring packages ... Preconfiguring packages ... dpkg: parse error, in file '/var/lib/dpkg/status' near line 11756 package 'vinagre': `Depends' field, reference to `libgconf2-4': version contains ` ' I get it while trying to update my computer.
View 2 Replies View RelatedBooted my laptop up for the first time in a while and ran
Code:
sudo apt-get upgrade to get updates for my packages. After installing I needed a reboot since I was on kernel 2.6.35-28. Post-reboot, I get stuck on a black screen with random artifacts after the purple screen after Grub, regardless of kernel (back to 2.6.35-22 is the oldest I have) with exception to the recovery mode options. Pressing the power button will shutdown the system in what seems to be the usual manner. The screen changes to the purple with ubuntu in the middle and the dot loading bar and shuts down.
I booted into recovery mode and opted to repair packages and rebooted but to no avail. I can get into a terminal by editing the boot options in Grub swapping out " quiet splash vt.handoff=7 " with "--verbose". Currently have a terminal on kernel 2.6.38-10 Ubuntu 11.04 32-bit. Win 7 partition also boots fine.This feels like a driver issue, but I'm not sure. Boot log (/var/log/boot.log) looks fine except for these lines:
Code:
fsck: fsck.ntfs: not found
fsck: Error 2 while executing fsck.ntfs for /dev/sda2 /dev/sda3: clean, 262541/8560640 files, 2310841/36228480 blocks
init: ureadahead-other main process (723) terminated with status 4
The first 2 shouldn't be affecting my Ubuntu boot in this manner (other than failing to automatically mount my NTFS partition, which is a different problem), however the last one worries me. Doing some research on the termination status 4 of ureadahead-other I came across this page here, but am wary to just go around willy-nilly deleting things I don't know much about. It wouldn't be a great loss to simply blow the disk away and restart, but I'd rather salvage what's there if I can..