Ubuntu Installation :: Error: Modifications Require Authentication At /usr/share/perl5/smbldap_tools.pm Line 1187
Nov 22, 2010
I recently upgraded our ldap server to Ubuntu 10.04.1 (64-bit). In the past, I've been able to use smbldap-useradd to create new ldap and samba users but am having problems since the upgrade. For starters, /etc/smbldap-tools was empty, which caused smbldap-useradd to bomb out with configuration-related errors. After following some tips on how to create the config files, I've gotten as far as being able to run smbldap-useradd but am now getting this error:
Error: modifications require authentication at /usr/share/perl5/smbldap_tools.pm line 1187, <DATA> line 466.
I've got the correct credentials set up in /etc/smbldap-tools/smbldap_bind.conf. I can login and make changes just fine through phpldapadmin with the same credentials, but smbldap-useradd just doesn't want to work.
View 3 Replies
ADVERTISEMENT
Feb 5, 2011
Package Installation error
Recently I get an error while installing any packages offline.
"Action would require the installation of packages from not authenticated source".
The key icon at top tight corner shows.
View 3 Replies
View Related
Oct 7, 2010
I get the following:
ERROR: No such file or directory: "/usr/share/guile/1.6/slib/init/slib/require.scm"
The file does not exist. I have removed gnucash and guile-1.6 entirely along with a bunch of other stuff that depended on guile. Then I reinstalled gnucash. Didn't help. I'm running Ubuntu 10.04. It used to work. I don't know what has changed.
View 3 Replies
View Related
Mar 24, 2010
I've been away from Fedora for a couple of releases but just installed F12 amd64. My updater doesn't require authentication to update the system and any user can install updates. Is this "normal" for F12?
View 14 Replies
View Related
Feb 24, 2011
I could not seem to find any documentation on how to chage the X anf y coordinated of the grub 2 menu in order to place it in a differrent location on the screen and change is its size (not resolution), remove border.
View 1 Replies
View Related
Mar 14, 2011
On Ubuntu server 10.10, with a relay smtp server with authentication via postfix; I keep getting 535: Incorrect authentication data. I'm sure my username and password is correct. Heres how I set up postfix: I created a file called smarthosts.conf in my /etc/postfix/ directory that contains the following:
[Code].....
my server uses plain text authentication on port 25. I would like to use security like SSL, but this particular server is unsecured.
View 9 Replies
View Related
Sep 19, 2010
Did anyone have a problem accessing a USB device using perl5 on ubuntu 10.10? I have a script written in perl that was working fine on ubuntu 10.04, when accessing /dev/ttyUSB0 (USB to serial port)
In the current version this script freeze or goes to an infinite loop when accessing the ttyUSB device. any thoughts?
View 1 Replies
View Related
Apr 30, 2011
When running
Pear upgrade
The following error is raised:
View 1 Replies
View Related
Mar 15, 2010
I have connected a Windows 7 pc to a Ubuntu pc using a crossover cable & TCPIP. This works fine - can ping both ways and can 'see' both icons however when I try to setup the printer in Ubuntu the task fails at a prompt fpr user name - workgroup - password prompt. It tells me I must give a password to connect to the Windows box. This setup has worked when using WinXP but fails now. I have used all passwords known to me but nada. Where in the world is the Authentication dialogue originated? I'm both new to linux commands and loosing the will to live!
View 2 Replies
View Related
Apr 18, 2010
I have ubuntu 9.10 installed with 2.6.31-21-generic kernel and have recently bought a LaCie d2 network NAS to which I am connecting via a Conceptronic C54BRS4A router, but am having problems with connecting to the share drives.
The d2 software is version 1.0.8 and I have configured a share drive <4music>, and a user <myuser> assigned to a workgroup <workgroup> and with readwrite permissions for that drive.
The version of LaCie Network Assistant (LNA) for Linux available for download here url is just 1.1.0, but the CD accompanying the NAS actually contains LNA for linux version 1.4.1 (5). I have installed both versions and the version 1.1.0 does not even find the drives, let alone mount them, so I am using the 1.4.1 version which does seem to work.
On launching LNA 1.4.1 I am asked for password to mount the drive:
�Enter your password to perform administrative tasks. The application 'mount -t cifs '//192.168.0.102/Public' '/home/myuser/mount -lacie/192.168.0.102/Public' -0 user=myuser, pass=mypassword' lets you modify essential parts of your system
and both the Public and 4music drives are marked in green as Smb (Windows File Sharing) when connecting as registered user <myuser> with password <mypassword>
When I navigate to smb://d2.local/ I can connect fine to Public drive, but the problem comes when I try to connect to Share drive and I get dialogue box saying �Password required for share share on d2.local� and requiring me to input username, domain, password.
The user <myuser> on my linux box is the same as that configured for d2. The domain field autopopulates with the workgroup <workgroup> I have set up for that user on the d2, and I enter the appropriate password <mypassword>, but the connection is not authenticated.
Running
/usr/bin/smbclient -L 192.168.0.102
returns:
Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.4.1]
Sharename Type Comment
Share Disk
code....
View 2 Replies
View Related
Feb 16, 2010
I have a Debian 5.0 system, fresh install, updated with aptitude. Now i'm using vmware to test my system, but the 'real' system, is a small network with around 30 workstations connected in a cisco switch + router. So i test the configuration at home, and when it's working and done, i will copy it to the real network, because i don't want to mess it up
So i installed the newest samba to act as a PDC. You can read my configuration in the following lines:
Global Settings
Share Definitions
I added root with 'smbpasswd -a root' command. When I try to connect to the domain with a Windows XP, it says: ' The username cannot be found '
View 5 Replies
View Related
Jul 31, 2010
I am using Kubuntu 10.04, but I am posting here because the Kubuntu forums seems to be user agnostic. I just couldn't get past the verificaiton process. This should be a general networking problem that Ubuntu users can answer. On my home network, I have a Windows machine whose shared folders I can access from one machine running Ubuntu 9.04. I've had to do no network configuration on Ubuntu, it just works out of the box. On Windows I do not have a password that I use to login. Ubuntu does not ask for it either.
But on Kubuntu, when I browse the network samba shares, I can see my Windows share, open it, navigate it, but every time I cd into another level in the share or click on a file (say a music file to play), the authentication window pops up asking for a user name and password. What login information should I use here? I tried my Windows user name and a blank password,
View 8 Replies
View Related
Aug 6, 2010
We may edit some values for GRUB from /etc/default/grub to modify the way that computers boot up and shutdown.My question is how to make such modifications for boot and shutdown. For example, suppose I want to display two splashes one during booting and the other during shutdown or I would like to acpi=off during booting and then acpi=force during shutdown.
View 1 Replies
View Related
Mar 28, 2011
Where can I download Ubuntu Firefox Modifications in its xpi version?
View 5 Replies
View Related
May 21, 2010
I have just installed the 32bit and 64bit versions of CentOS 5.5 and was wondering how I can add these machines to Active Directory for authentication. I've done this in the past with CentOS 5.4 using the GUI and everything worked just fine but now need to do everything from the command line.
View 1 Replies
View Related
Aug 4, 2010
I would like to use an EFI loader, if it's easy to do, and doesn't require a whole other set of drivers.. My laptop has EFI, but I think the default 10.04 AMD64 install uses regular BIOS bootloader. The HD isn't GPT though as far as I know, it's MBR, as Gparted says it's MSDOS.. (but i do have an ext4 partition, the ntfs HP recovery partition, and a small HP tools EFI partitions, at the very end of the HD).. How do I install it, should I, is there a benefit (memory?)?
View 4 Replies
View Related
Nov 1, 2010
I am installing a simple software(Gnome-Do) from software center but it gives me an error....Require installation of untrusted package...? after that it stops installation...
View 5 Replies
View Related
Mar 24, 2011
I am having problems troubleshooting my pure-ftpd setup. I am always getting a 530 authentication error. I attempted to correct the problem by doing the following:
# pure-pw mkdb
# ln -s /etc/pure-ftpd/conf/PureDB /etc/pure-ftpd/auth/PureDB
# gedit /etc/pure-ftpd/conf/PAMAuthentication
[code]....
This create a new error. 421 Unable to read the indexed puredb file (or old format detected) - Try pure-pw mkdb I am getting a feeling this is getting from bad to worse. I attempted to remove pure-ftpd and pureadmin to start over again. However, it appears I cannot remove everything. I attempted the following:
apt-get remove pure-ftpd pureadmin I am not sure what this really does because I can still see the folder /etc/pure-ftpd and I cannot remove it. I could not use rm /etc/pure-ftpd because the system said it was not empty. I also tried sudo aptitude remove pure-ftpd pureadmin . Again I cannot completely remove the folder. How do I completely remove pure-ftpd and pure admin and all databases, files and folders so I have a fresh system ready to start the install again?
View 1 Replies
View Related
Nov 22, 2010
This feels like dumb question but here goes...I am wondering what it takes to edit the Linux kernel source and build it with my modifications!
View 5 Replies
View Related
Dec 16, 2010
I installed FC14. But when i create a VPN connection using NetworkManager, 10 seconds after VPN connection was established, vpn connection has been disconnected.In FC13, I didn't have this problem. In FC14, i use same settings used in FC13.
View 2 Replies
View Related
Apr 4, 2011
try to install something via software center or update it gives me this errorCode:Requires installation of untrusted packagesThe action would require the installation of packages from not authenticated sources.
View 2 Replies
View Related
Jan 25, 2011
When opening "Update-manager" I get this error:
E:Malformed line 47 in source list /etc/apt/sources.list (dist parse)
What I was trying to do was update my Opera web browser, when I tried, Ubuntu told me that I was attempting to download from an unauthenticated source, I checked the software sources list and Opera was in there, so I deleted it and re-added it, I must have done it wrong because after closing out and refreshing "Update-manager" it gave me the error above and closed. So now I can't update anything.
View 9 Replies
View Related
Apr 29, 2011
...../etc/init.d/before.local...System Console Stolen at line: 266 This line of red warning consistently appears immediately after something that ended with /etc/init.d/before.localThis is during the boot.Have anyone see it before ?It appears both in kernel versions:2.6.37.6-0.5-desktop2.6.37.1-1.2-desktop
View 3 Replies
View Related
Jul 3, 2010
I have a 500GB external usb drive connected to my USB router (running dd-wrt). I have the router setup with samba and can read/write to it from any PC on the network. I have it setup to automount in Ubuntu. How can I access that mounted samba share when I SSH into the box? I want to cp or mv files from the PC to the Networked samba share via ssh CLI.
View 9 Replies
View Related
Jul 29, 2010
I'm trying to add a line to fstab to mount a share on every boot. I can mount the share manually using
sudo mount -t nfs 192.168.2.1:/x_machine /mnt/test
I've added the line
192.168.2.1:/x_machine /mnt/test nfs rw,hard,intr 0 0
to my /etc/fstab file, but it doesn't seem to mount on boot. What am I missing. I tried looking in the log files for an error, but couldn't find anything. Ubuntu 10.04 x64 desktop edition.
View 7 Replies
View Related
Sep 19, 2009
I was impressed to be asked on Fedora 10 if I want to upgrade to Fedora 11 but the first time I tried I had this error:
Not enough space in /boot/upgrade to download install.img.
My boot partition is 99MB and AFAIK that is not unusual so I tried tidying up a bit, uninstalling all except 2 kernels, and now have about 80MB for whatever needs to be downloaded in /boot/upgrade. But I get the same error. I can fix this by using wired instead of wireless networking but I want to know for planning purposes (next time I create a boot partition) how much space is required?
$ ls -l /boot/upgrade
total 21594
-rw-r--r-- 1 root root 18985802 2009-06-03 00:02 initrd.img
-rw-r--r-- 1 root root 3035056 2009-06-03 00:02 vmlinuz
Should I delete these? It looks like they might be left over from last time but I assume preupgrade knows what is junk and what isn't.
View 6 Replies
View Related
Jul 17, 2011
I've tried to install FEdora 15 using the Fedora 15 DVD for i686 architecture. However, after the step where I chose the setup for GRUB boot options, I got this error: "Some of your repositories require network access but networking could not be setup" (or something similar). Then I only had the option to exit the installer, but after reboot there was no GRUB and I have no means even to boot back to Windows.
How to install Fedora without networking or is Fedora the only distro so messed up that this can't be done? I've tried the Live CD/USB version but that version has no C compiler to allow me to install networking drivers after install completes. Now I was told to try the full DVD, by the full DVD managed to mess up my computer completely.
View 10 Replies
View Related
Mar 6, 2010
I have a code over there. It reads a line from file and converts contents of it to double.
Code:
/*
* fileRead.c
[code]...
View 2 Replies
View Related
Oct 9, 2010
My computer is connected to the college lan where almost all machines are some variant of Windows OS. If i use Places > Network, while windows network is displayed, mostly it returns unable to mount shares, my workaround for this problem is I use some tool like nbtscan to see which hosts are up and then use network > Connect to Server > windows share and type in the ip address, this mounts the windows share even though Places> network doesn't display such hosts. My question is there some command line way where I can invoke nautilus to mount the windows share, ie the same job connect to server > windows share does? And is there some application like say lan surfer for windows which lists all the folders shared by a windows client.
View 3 Replies
View Related
Jan 22, 2011
I have installed ubuntu 10.10 and the Samba addon to configure my shares to my Windows terminals.This is what I got
Firewall off (utf disabled)
Internal Sata /dev/sda1 (EXT4 FS)
External USB HDD /dev/sdb1 mounted at /media/SG1500GB (EXT4 FS)
I have two shares
1. //home/test - Which I can see and access with no problems (can't write to it though even though I set the share as writable?, but, I can read from it). This is available to everyone. My windows terminal can see this folder and access it. This is on my main 80GB internal drive /dev/sda1.
2. //media/SG1500GB/Music. I set this up for everyone full access and I can see it at all my Windows machines but,I can't get into the folder. Windows keeps giving me an error stating network path not found.I also try to access it via the Nautilus (Places/Network/system/music) and get an error message "unable to mount location, Failed to mount windows share". This drive is mounted per the disk utility.
View 4 Replies
View Related
