I get the following:
ERROR: No such file or directory: "/usr/share/guile/1.6/slib/init/slib/require.scm"
The file does not exist. I have removed gnucash and guile-1.6 entirely along with a bunch of other stuff that depended on guile. Then I reinstalled gnucash. Didn't help. I'm running Ubuntu 10.04. It used to work. I don't know what has changed.
trying to install gnucash 2.2.9 from SlackBuilds. I have the current versions of slib and guile installed (slib from slackbuilds and guile from slackware). when installing slib I get the following:
Executing install script for slib-3b2-i486-2_SBo.tgz.
ERROR: In procedure primitive-load-path:
ERROR: Unable to find file "slib/guile.init" in load path
Package slib-3b2-i486-2_SBo.tgz installed.
Slib is installed. Try to run gnucash and I get the following: gnc.bin-Message: main: binreloc relocation support was disabled at configure time.
ERROR: In procedure primitive-load-path: ERROR: Unable to find file "slib/guile.init" in load path guile.init is in usr/lib/slib as it should be. I'm lost - where should I look next?
I recently upgraded our ldap server to Ubuntu 10.04.1 (64-bit). In the past, I've been able to use smbldap-useradd to create new ldap and samba users but am having problems since the upgrade. For starters, /etc/smbldap-tools was empty, which caused smbldap-useradd to bomb out with configuration-related errors. After following some tips on how to create the config files, I've gotten as far as being able to run smbldap-useradd but am now getting this error:
Error: modifications require authentication at /usr/share/perl5/smbldap_tools.pm line 1187, <DATA> line 466.
I've got the correct credentials set up in /etc/smbldap-tools/smbldap_bind.conf. I can login and make changes just fine through phpldapadmin with the same credentials, but smbldap-useradd just doesn't want to work.
/etc/init.d/xorg start : No such file or directoryWhen the server boots i get a blinking cursor.
View 2 Replies View RelatedI have insttaled pglpot5.2 but when i want to run a file with this programm it gaves me this error
"can not load or share libpgplot5.so there is not such file or directory"
although i have this library in my lib directory what should i do ?
I have a server with Fedora 13 with which I would like to get NFS working. I have looked up multiple howto's and tutorials, but I'm having a problem not addressed by any of them.Official how-to, another how-to, and another how-to.I have verified that nfs-utils, nfs-utils-lib, portmap, and system-config-nfs are installed and running. I have verified that I have, in fact, shared the directory that I want to share, and that the proper permissions are set.
I had to go through some gyrations to get the Belkin wireless N router to allow my server to have a static IP. However, I can ping the server from the nfs client (a toshiba satellite running mint 8), and vice versa. I have (for now) disabled firewalls on both computers. I think I have disabled SELinux on Fedora 13 (for now).When I attempt to connect to the server from the client, the output looks like this:Quote:
aragorn ~ # mount -v 192.168.2.101:/test /home/kelev/test/
mount: no type was given - I'll assume nfs because of the colon
mount.nfs: timeout set for Sat Dec 18 12:21:09 2010
[code]....
# /etc/init.d/dhcpd.conf -bash: /etc/init.d/dhcpd.conf: No such file or directory what is the problem? and how to configure out "joe"
View 5 Replies View RelatedI am using Ubuntu 10.04 LTS. Two days ago I updated using update manager. After that I can not boot Ubuntu. When I trying to boot system showing message " Ubuntu is running in low-graphics mode Your screen, graphics card and input device settings could not be detected correctly. You will need to configure these yourself" But I can not configure it.I can not boot to 'recovery mode' also
/var/log/boot.log
Code:
fsck from util-linux-ng 2.17.2
/dev/sda6: clean, 304282/1680960 files, 2964945/6723194 blocks
init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
[code]....
Now I am using Live CD.
I have an Acer 9410Z laptop that I believe is running the Maverick Meerkat version of Ubuntu Studio. I just did an upgrade using Synaptic. I get to GRUB, but When I try to boot 2.6.35-22 (or the recovery mode or a real time kernel I had installed )I get the error:
INIT: Failed to spawn ureadahead main process. No such file or directory I then get the Ubuntu Studio splash screen for 2 seconds but then instead of a normal boot I end up in the terminal.
When running the beta of blender 2.5, I get the following error. blender: error while loading shared libraries: libpython2.5.so.1.0: cannot open shared object file: No such file or directory In previous versions of ubuntu you could 'apt-get install python2.5' to resolve the issue, but it doesn't appear in any/all of the repositories. where I can get python2.5 for lucid-lynx?
View 1 Replies View RelatedI just updated from 9.04 to 9.10 (it's a long story, and I still can't go beyond 2.30).The update got rid of WICD, which is what I used and installed network-manager. Network-manager was not working at all, so I uninstalled it again and installed WICD. I could connect perfectly and had no problems.However, now the computer hangs during boot, saying that init can't start network-manager. I assume that something went wrong during the uninstalling process, since it wasn't updated.
This is the message: init: Failed to spawn network-manager main process: unable to execute: No such file or directory.
So how do I update it or manually change it so it stops requesting network-manager?
I have iMac 2.4GHz with rEFIT installed. I installed Unity on one of the partition. Kernel is still 2.6.38.8. I am getting error message when I run the command
sudo gedit /etc/x11/xorg.conf
The error message is
(gedit:2139): Gtk-WARNING **: Attempting to store changes into `/root/.local/share/recently-used.xbel', but failed: Failed to create file '/root/.local/share/recently-used.xbel.AC7YXV': No such file or directory
(gedit:2139): Gtk-WARNING **: Attempting to set the permissions of `/root/.local/share/recently-used.xbel', but failed: No such file or directory
My machine is dual booted with Fedora 14 and RHEL 6. (I have only installed Red Hat because I am studying for RHCE). Just now I tried to install the Banshee player on my Red Hat OS. I ran various scripts inside the directory to see what really happens and after I ran the 'Makefile.in' file my terminal froze. It displayed '/bin/ not found'Then i restarted my computer and I got the following messages:
init: Failed to spawn readahead-collector main process: unable to execute: no such file or directory
init: Failed to spawn rcS main process: unable to execute: No such file or directory
init: Failed to spawn readahead main process: unable to execute: No such file or directory
[code].....
I tried run level 1 and run level 3 but I get the same error messages.
PS: My Fedora 14 installation is working fine.
Ubuntu 9.10 will not boot! System froze this morning, I restarted and it is now failing to boot. Starts loading grub and I get this message:
mount: mounting /dev/disk/by-uuid/04aa3697-7bc0-45b5-b86a-77a1e6534bd5 on /root failed: invalid argument
mount: mounting /sys on /root/sys failed: no such file or directory
mount: mounting /dev on /root/sys failed: no such file or directory
[code]....
I booted with 9.04 LiveCD discovered the drive could not be mounted-ran fsck -ln and it told me the drive has no valid partition table. I have had intermittent problems mounting flash drives before this, so I'm kind of worried it might be a hardware issue.Also have files on that drive I would rather not lose, so reinstalling is hopefully a last resort.
I get the following error whenever I launch bash:
Code:
mkdir: cannot create directory `/dev/cgroup/cpu/user/5900': No such file or directory
bash: /dev/cgroup/cpu/user/5900/tasks: No such file or directory
bash: /dev/cgroup/cpu/user/5900/notify_on_release: No such file or directory
It seems like it's probably from this part of .bashrc:
[Code]...
What does this code do, why, and what's causing it to go wrong?
10.04 64 bit won't boot.
error message: enabling additional executable binary formats binfmt-support /usr/share/acpi-support/power-funcs: No such file or directory
I want to use LDAP on SUSE 10 to authorize the use of certain objects within IBM's MQ Series via the setmqaut command. I do not want to authenticate these users to the Linux server itself via LDAP. Users that actually log onto the Linux server will be authenticated through a product from Quest formly known as VAS. My question is, does LDAP require the use of PAM or can I utilize the facilities within LDAP to communicate with a Windows Active Directory so that I can authorize the use of MQ Series objects and not authenticate actual users that would log onto the server.
View 3 Replies View RelatedI am new to Linux and I wanted to setup a dedicated game server on my notebook.
I've installed Ubuntu 9.04. I than created a directory named /home/phlex/kfserver. I downloaded the application binary from Steam. I changed the file permission with chmod +x hldsupdatetool.bin and now the file attributes are -rwxr-xr-x.
The problem is when I try to run the binary file. If I type ./hldsupdatetool.bin I get an error message "-bash: ./hldsupdatetool.bin: No such file or directory. It seems the OS can't find the file. I've downloaded the file several times thinking it may have been corrupt but it's not. I can delete the file, I can rename it and so the file is there. Sometimes Linux can be aggravating to use.
my squid show like this when i try create swap directory
[Code]....
Salutations,I've been struggling with getting audacious working for the past hour. I'm using synaptic to install it. When trying to run it from the bash, I'm getting the following error:
Code:
audacious: error while loading shared libraries: libmowgli.so.1: cannot open shared object file: No such file or directory.I tried to make /usr/lib/libmowgli.so->libmowgli.so.1 link, but it didn't help. Tried reinstalling audacious/libmowgli and a few others packages, but in vain, too.
I'm trying to setup a keyboard-command to open my downloads folder. Simple enough. To get things started off I did $ gnome-open /home/user (my name where user is) and it opens my user home directory. But when I get to adding downloads to the end of it it gives me this $ gnome-open /home/user/downloads Error showing url: Error stating file '/home/User/downloads': No such file or directory As far as I can tell there is most obviously a downloads directory in my user folder. I also get this error when trying to open any other home folder, like music, or pictures.
View 3 Replies View RelatedI'm currently stuck at 6.13 GMP-5.0.0 of the LFS installation. After running make, I receive the following:
error while loading shared libraries: libbfd-2.20.so: cannot open shared object file: No such file or directory
make[2]: *** [libmpn.la] Error 127
make[2]: Leaving directory `/sources/gmp-5.0.0/mpn'
[code]....
I get an error when running slapt-get. The error is: "slapt-get: error while loading shared libraries: libsas.so.2: cannot open shared object file: No such file or directory".
I've booted the Slackware disk # 1 and unchecked everything except the libraries category and installed them. I rebooted and it still says this. I get this same error before I put the disk in and rebooted to install ALL libraries. I really need help. BTW, I can't load KDE.I found a pkg manager already installed called "slackpkg". But I really need help on this library issue!! I uninstalled it (slapt-get) anyway, so forget that!
i have a problem with realplayer 11 i can't open it due to that error message
Code:
/opt/real/RealPlayer/realplay.bin: error while loading shared libraries: libgdk-x11-2.0.so.0: cannot open shared object file: No such file or directory so how can reveal this problem
I want to install tomcat so i followed the steps mentioned in below link: [URL] After going through the steps i checked for
Code:
./startup.sh
but it showed me the error
Code:
touch: cannot touch `/usr/share/apache-tomcat-6.0.32-src/logs/catalina.out': No such file or directory
/usr/share/apache-tomcat-6.0.32-src/bin/catalina.sh: line 372: /usr/share/apache-tomcat-6.0.32-src/logs/catalina.out: No such file or directory
when i went through my "/usr/share/apache-tomcat-6.0.32-src/" there was no "logs" folder so i tried
Code:
find / -name catalina.out
but it returned nothing.BTW i have installed "apache-tomcat-6.0.32-src", "java-1.6.0". Please if any one could look into the problem and provide me the solution to error mentioned above and why there is no "logs" directory in "/usr/share/apache-tomcat-6.0.32-src/".
I just installed ubuntu 10.04 on a pc... the server edition. i went to restart samba and it is not in the init.d directory. is there a different folder for server plateforms? cause im use to my 9.10 desktop edition.
also one more question, when i "ls" the /ect/ directory of course i cant see the whole thing because my monitor only shows the bottom of the file, is there a way to list it like the "more" commands, or possibly scroll up?
My ubuntu stops when mounting system hdd. The screen display the following messages :
mountall:/etc/fstab: No such file or directory fsck from util-linux-ng 2.16 WARNING: couldn't open /etc/fstab: No such file or directory init: mountall main process (545) terminated with status 1 General error mounting filesystems. A maintenance shell will now be started. CONTROL-D will terminate this shell and re-try. udevd[560]: can not read '/etc/udev/rules.d/z80_user.rules. Ubuntu: clean, 474879/24231936 files/28016581/96898047 blocks root@i7:~# exit_
I suspect the disk manager pysdm that i had just installed today and it had crash during the previous session. The /etc/fstab file does not exist anymore and i cant rename the fstab.bak because the disk is read-only even for my root user
I use Codeblocks as IDE environment for my C programs. I recently added the matrix library Meschach, but unfortunately the headers are not found during compiling/linking process.For instance, my generic program is the one below:
Code:
#include <stdio.h>
#include <stdlib.h>
#include <matrix.h>
[code]...
This program generates the following error during compilation:
Quote:
main.c|3|error: matrix.h: No such file or directory|
And the declaration <matrix.h> is supposed to include the Meschach library, according to the instruction on the below link:
[URL]
Furthermore, I see on folder /usr/include the following:File stdio.h;
Filestdlib.h;
Folder "Meschach", which contains the file "matrix.h".
rcon@li121-251:~/b3$ ./b3_run.py
: No such file or directory
rcon@li121-251:~/b3$ l;
[Code].....
as you can see up top it gives me an error when i try to run the file. it is a Ubuntu error and i don't what the heck is causing it. had it before but don't remember how i resolved it.
how to install libxcb-xlib.so.0?When I start one software and it complains that
"error while loading shared libraries: libxcb-xlib.so.0: cannot open shared object file: No such file or directory"
I have lastest libxcb1 installed and searched in my system but didnot find a relevant result.