I'm dual boot with Vista(TM) and UBUNTU(tm) and ran out of space on Ubuntu partition:I booted Ubuntu 10.04LTS live CD and shrank the VISTA. It would NOT let me grow the extended partition? So now I have:
sda1 ntfs /media/TOSHIBA_SYSTEM_VOLUME 1.46GB
sda2 ntfs /media/SQ004588V03 88GB
sda4 ext3 THIS IS MY NEW PARTITION 15GB
[code].....
I set up a dual boot system with Win7 and Ubuntu 9.10. Ubuntu is the first OS listed in the boot menu. I would like to change the boot order so Windows is first. Also after running a few updates I now have multiple boot items listed for Ubuntu that I'm sure are no longer needed. Having never edited Grub and searching through the forum, I'm asking help. I going to guess that I want to edit grub.cfg. If so, what do I need to change within the following information?
[Code]....
I think my Natty 64 bit install is missing a dependency for gk, even though it shows up install in Synaptic. I have also tried using Start up Manager and the changes I make there don't show up after restarting either. I just want to change the default boot to number 4, Windows. Any suggestions are welcome, but I have tried all the ones I've found on this forum so far and none have worked, including editing etc/grub/default and saving with sudo update-grub. That's when I get a "gk not found" error.
View 2 Replies View RelatedI have 2 harddisks 1 tb and 160 gb. In 1 tb fedora is installed. In 160 gb windows is installed. 1 tb is the master. 160 gb is not being detected. How to edit grub.conf file to edit the menu?
The content of grub.conf is
# grub.conf generated by anaconda
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You do not have a /boot partition. This means that all kernel and initrd paths are relative to /, e.g.
# root (hd0,1)
# kernel /boot/vmlinuz-version ro root=/dev/sda2
# initrd /boot/initrd-[generic-]version.img
#boot=/dev/sda
default=1
timeout=5
splashimage=(hd0,1)/boot/grub/splash.xpm.gz
hiddenmenu
title Fedora (2.6.35.6-45.fc14.i686)
root (hd0,1)
kernel /boot/vmlinuz-2.6.35.6-45.fc14.i686 ro root=UUID=bfc7d406-5ae3-4335-a2d8-37472dcfa7dc rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet
initrd /boot/initramfs-2.6.35.6-45.fc14.i686.img
title Other
rootnoverify (hd1,0)
chainloader +1
Debian if my first OS and i want to dual boot Fedora12.Ok i installed Fedora12 and choose not to install the bootloader(gonna use the one Debian installed)What i'm tring to do in Debain is edit my /boot/grub/menu.lst
Here is what i have
Code:
title Debian GNU/Linux, kernel 2.6.26-1-686
root (hd0,0)
kernel /boot/vmlinuz-2.6.26-1-686 root=/dev/hda1 ro quiet
initrd /boot/initrd.img-2.6.26-1-686
code....
I have a dual boot system. a 200gb hd with ubuntu 10.10 and windows pro on 100gb hd. the problem im having is the 'black screen' error.
When i boot ubuntu, it boot fine but it shuts off my screen cause its not supporting my video hardware which is a geforce 6100 or something.
I know the fix is to change grub to support older video architecture. Something like changing line 'GRUB_CMDLINE_LINUX_DEFAULT="QUEIT SPLASH NORNODESET"'
But how do i change the grub when the screens off? i can't, right. Is there a way i can change the boot parameters of ubuntu from my windows boot or maybe from the ubuntu virtual desktop?
I had a dual boot system(WinXP and Ubuntu). But something happened and I was not able to boot into my Ubuntu partition. It gave GRUB missing error. I tried reformatting the dedicated 40 GB ubuntu partition to NTFS and again try to reinstall ubuntu. But now, when I install ubuntu through boot time install, it shows that my whole hard disk is empty( but I have windows XP on whole hdd at the moment) and do not give any other option but to use whole hdd.
Alternatively when I try to install it inside windows, then after rebooting it shows, no root file system defined error and neither gives any option to do so also ( this method worked earlier o my PC). At the moment, It still shows ubuntu and windowsXP at OS choice menu at boot time but when booting in ubuntu, it shows GRUB missing. (I don't have any ubuntu installation on my hard disk at the moment).
While installing with a separate /boot partition I cannot get two distinct copies of ubu installed on one machine and be able to choose between them. Each is installed on a different hard drive. x64 versions. I've had this issue both ways:
Stepsinstall mythbuntu
install ubuntu
Result
Two entries in grub. Both cause ubuntu to boot
Stepsinstall ubuntu
install mythbuntu
Result
Two entries in grub. Both cause mythbuntu to boot Grub 2 is so unfriendly for fixing these things. I don't know where to make changes. Ok, Grub 2 is very powerful, maybe it's the lagging documentation, or lack of tutorials that is the problem. But I don't know how to fix this. Do I start over without the /boot partition? Do I bail on ubu?
So I need to become the root user in order to edit a grub file in a seperate partition, so I can get back into this partition. How can I become and stay as root user in the desktop environment? (I know you shouldn't do this, but I need it.)
View 10 Replies View RelatedI am new to Debian but have some basic experience with Linux and am currently trying to triple boot Windows 7, Fedora 16, and Debian on an HP Pavilion dv7. I have the Windows Boot Loader on my MBR because I've heard that Windows updates can cause boot issues if GRUB is installed there. This means that I've been installing GRUB in the /boot partition for each Linux distro and creating corresponding entries in the Windows boot menu.
This has worked in the past with both Fedora and Ubuntu, but I have not been able to work around it with Debian. When I choose my Debian option in the Windows boot loader, it loads GRUB but hangs after it prints "Welcome to GRUB!", and I have to restart the computer. I would like to hear what more experienced Linux users have to say both about why this isn't working for Debian and about if keeping the WIndows boot loader is the right way to go.
Also, here is my partition layout:
Partition 1: SYSTEM (HP pre-installed) (209 MB)
Partition 2: Windows Partition (472 GB)
Partition 3: Extended (160 GB)
1: /boot for Fedora (524 MB)
2: Physical Volume for other Fedora partitions (79 GB)
3: /boot for Debian (749 MB)
4: Physical Volume for other Debian partitions (80 GB)
118 GB free space
Partition 4: HP_TOOLS (HP pre-installed) (108 MB)
I set up my Dell Inspiron Laptop as Dual Boot -> Xp / Ubuntu 10.04. - all worked well. I had 2 installations of XP on this machine and I removed one - all worked well. I then went into XP and deleted the partion (4) that the old XP had resided on (using Easeus Partition Master) All NOT working well !! Now when booting the machine I get grub rescue> I did ls and got ....
[Code]...
Here's what I want to do. I have two separate HDD
HDD 1 : 160 GB (dedicated to windows, already working)
HDD 2 : 500 GB Will be using dedicated to ubuntu (not partitioned yet)
I want to use the HDD two only for linux and this HDD is not partitioned yet. What I want to do is
- A dedicated Grub partition (/boot) on HDD 2 (Do I really need it when I am using just two os? Will it work on second HDD?)
- / root partition
- /home partition
- /swap partition
- /fat32 partition (do I need it to share files with win?)
I'm using HP Pavilion dv2108tx I have ubuntu and Win7 dual boot. The problem is every time I change setting to the BIOS there will be a new list of ubuntu boot came up and now I scroll trough the whole list. Is there anyway to edit GURB boot list.
View 3 Replies View RelatedI recently switched my laptop from Ubuntu 11.04 to 10.04.2, and during the process, I used GPARTED to partition the drive so that I could have both versions installed simultaneously while I transferred files and settings and such. A few days ago, I removed the 11.04 partition, formatted and added that disk space to 10.04's /home partition. However, when I boot up, GRUB still gives me the option of loading into the newer 11.04 partition with the newer kernels. How do I remove those options from the GRUB menu? I checked the Ubuntu GRUB help pages, but didn't feel confident that I could do edits without messing up the 10.04 boot settings.
View 6 Replies View RelatedI somehow recalled a rule re the location of the boot partitions with LILO being required to be in the first part of the drive (1024 cylinders, it seems) and I found it indeed in an old doc:
Boot Partition: Your boot partition ought to be a primary partition, not a logical partition. This will ease recovery in case of disaster, but it is not technically necessary. It must be of type 0x83 "Linux native". If you are using lilo, your boot partition must be contained within the first 1024 cylinders of the drive. (Typically, the boot partition need only contain the kernel image.) Is this still valid in GRUB, esp in Fedora 10?
Noobish question on multibooting multiple Linux distros. I have four of the current major Linux distributions. Each has been installed and run individually (no other Linux distribution installed) in a dual-boot configuration with Windoze. No problem.
What I want to do is install all four Linux distributions and multiboot them. Reading the internet it would seem this is a simple task with GRUB. The short version being - install a Linux distro with a separate /boot partition for GRUB and use GRUB to boot the other Linux distros from the GRUB boot menu.
So I installed one of the Linux distros with a separate partition for /boot. The distro installer installed GRUB in /boot and correctly setup a dual-boot configuration with Windoze. GRUB was installed to the MBR. Next I installed a second Linux distro in its own root partition and told the distros installer NOT to install GRUB to the MBR, but rather, to the boot sector of the root partion of the second Linux distro. Installation was uneventful (and I could access the second Linux partition from the first installed Linux distro, things looked ok). Then I added to following to the installed (MBR - /boot) GRUB's menu.lst:
Code: title lixux distro 2
root (hd0,7)
chainloader +1 After which I rebooted the system and the new entry for the second Linux distro now appears in the GRUB boot menu. I selected the second Linux distro from the boot menu and got the following GRUB error: Error 5 : Partition table invalid or corrupt
[Code]....
I just installed Debian on the unused part of my HDD. It did not pick up the other OS I have on this PC, but the installer said I could later edit GRUB to make the other OS boot again. I have looked around and done some searches with no luck.
View 14 Replies View Relatedhow to edit the grub listing that appears during computer boot.
My listing shows 3 OS:-
1. Ubuntu 10.04
2. Ubuntu 9.10
3. Windows XP
I have deleted Windows XP, meaning that my system does not contain Windows XP.
I have Ubuntu 9.10 64 Bit, and I also have Windows 7, and I want to make Win7 boot first and without having to manually choose it every time I restart, for my non-linux using family. I have tried the guides where it says you have to edit the "menu.lfg(or whatever it is)" and I don't have that file. I have looked, it's not there, the closest I found was "grub.cfg" and I can't make any sense out of it. I'm not unfamiliar with computers, I'm just relatively new to Ubuntu, and want to make the best out of it I can, I love it. I've tried going into GRUB, and and editing the Win7 Loader, but it doesn't work.
View 4 Replies View RelatedIn my Red Hat 7.2 , the /boot/grub/grub.conf has the following data :
But when I reboot my Red Hat server , I don't see the Grub menu to say edit the boot kernel .
I got ubuntu 10.04 lucid lynx along with windows (dual boot) and using Grub. On my computer, I have my C:/ (programs) and D:/ (data). I've never used my D:/ before that day that I've lost my windows partition on my grub menu. I usually use my D:/ with windows. The first time I used my D:/ to store data with linux, I lost my windows option in my grub menu. I'm not sure what I did wrong but I do want to restore my windows option in my grub menu.
After "fdisk -l",
I checked in /boot/grub and there is no menu.lst to modify. how I can get back my windows option in my grub menu ?
i installed ubuntu inside windows but someone instead of uninstalling it directly deleted the ubuntu folder inside windows ,thinking that the partition will be deleted. but when i restarted the system and command prompt came and said unable to find boot record and i couldn't boot windows as well and a grub prompt came like grub>, then i inserted the windows boot cd and repair the boot record error but my problem is , instead of doing this way, can i do so by grub prompt directly without using winidows cd.
View 1 Replies View RelatedI need to fix a part of the file and I don't know how to edit it. I'm using the Live CD - I have the install but I need to fix grub.cfg to use it.
View 9 Replies View RelatedI had windows 7 installed on my system prior to the installation of Lucid Lynx. The boot loader for windows is installed in /dev/sda1. The main windows installation is in /dev/sda3 Ubuntu is installed in /dev/sda5.
The grub update has added a loader for windows 7 for /dev/sda3 instead of /dev/sda1. How do i change that to /dev/sda1 in grub 2.0 as it says that it is not recommended to edit grub.cfg in grub 2.0. I know i can add something in custom section but I am not a pro in linux hence i'm not sure how to add that
I had to followed this tutorial on how to Install ubuntu on my Toshiba Satellite M35X-S114. I am stuck on step 2 now. I used one of the options and was able to get Ubuntu Desktop 10.04 onto my laptop. But now on my first restart I have to edit the GRUB menu and change the boot option so I will no longer then the black screen when booting. Only problem is I can't get to the edit GRUB menu. I turn the computer on select Ubuntu to boot. A black screen shows up I hit e to edit then the Ubuntu loading screen comes up (The one that says Ubuntu and has the dots below it) That screen stays up for about a half a second and it goes back to black and hangs there.
View 1 Replies View RelatedI'm trying to set up some shares on this pc and every time I try to edit the /etc/exports file I get this error. I get the same error when I try to edit /boot/grub.conf file or any other files. Does not matter what editor I use. I'm running f14.
View 3 Replies View Relatedis it possible to use a Windows-based recovery partition on a dual-boot computer to overwrite the Ubuntu partition and remove the GRUB loader? For instance, if you booted up your computer, accessed the hidden recovery partition and used it to reset the computer to it's factory default settings, would that effectively remove the Ubuntu partition and the GRUB loader? Would a completely new installation of Windows overwrite/uninstall Ubuntu and GRUB automatically?
View 4 Replies View RelatedI having a problem getting my grub loader to see one of my hard drives. I added a drive, and my grub loader lost track of where everything was. I couldn't get my old linux (Red Hat 9) so I installed SuSe on my new hard drive. But I need my be able to boot from my old hard drive because it has apps that only run on the earlier version. From /proc/partitions the old hard drive is sdd
major minor #blocks name
8 0 976762584 sda
8 1 2104483 sda1
8 2 20972857 sda2
[code]....
I dual booted Fedora 12 and Windows 7 and I have to hit the space bar in order to bring up the boot menu asking which OS to use. Then I see "Other" which is Windows 7, so how do I edit this to make it say Windows 7? This is what I see...
Grub edit> chainloader +1
Im tryin to give permission to modify the grub.cfg by the following command chmod 755 /boot/grub/grub.cfg but unfortunately i get the following error.chmod: changing permissions of `/boot/grub/grub.cfg': Operation not permittedHow do you fix this? am i executing the wrong command? I just want to be able to modify the text Windows Vista (boot loader) to Windows Vista in the grub.cfg file.
View 7 Replies View Related