my ubuntu laptop have crashed and all I get up is a terminal that report that it is a "read only file system". is there any way to move these files to a usb memory or to at least read them?
View 3 RepliesI'm running Karmic 64-bit and Kate 3.3.90.I have been splitting up a very large (16,000 lines) text file by copy/pasting bits of it into smaller files. I had about 40 of these smaller files loaded into a session along with the large file. About 20 were from a previous day of editing and about 20 had been added (and saved) today.
I tried to save the file I currently had open and Kate crashed. I didn't think it was that big a deal until I reopened Kate and all of the files I had added today were gone!!I've looked in the folder and even the backup files that should have been there for files I'd saved more than once are not there.
I was upgrading from 10.04 to 10.10 when my laptop crashed due to a HW issue not related to upgrade. But now when I start:
1) The laptop, it boots up till the point GDM log in screen is displayed without any log-in option. The system does not respond to any keyboard or mouse actions.
2) when I try to recover (recovery mode), the boot process comes til a point where it says "Console: switching to color frame buffer device 180x56"
And the prompt just stays there. It does not not drop to terminal. When I choose an older option in the grub, I do get dropped to initramfs prompt. How to restore my machine. re-instillation is not an option as I have some data I need in the home directory.
I was updating Ubuntu 10.10 to 11.04 and my computer crashed/shutoff because of overheating(my laptop doesn't ever do this when running Windows 7 but seems to really need to be as cool as possible when running Ubuntu). the update was at about 12-18 minutes left(also i am using wubi to have it run alongside windows). After getting pissed off that i forgot to backup Ubuntu i restarted it to see if it would finish updating.
To my dismay it the loading screen looked a bit unusual and when it go to the login screen the word "Ubuntu" was flashing uncontrollably and the time in the bottom right corner was acting the same. i feel that i have totally ruined it and i also don't know how i can remove Ubuntu from my computer so that i could reinstall it as Ubuntu 11.04 instead of upgrading from 10.10. i still have Wubi.exe for Ubuntu 10.10 but i'm not sure if that just searches for the most recent version of Ubuntu.
I am writing this from a LiveDVD of 11.04. My machine, which is an Inspiron1501 with AMD64 dualcore crashed while running a working copy of 10.04LTS 32bit. At first Harddrived seemed unrecoverable, but not that may not be the case if I can mount it. HD is partitioned as 1 FAT which holds the OEM installer1 NTFS with a sub/ virtual NTFS (not as a file, but as a "partition", only readable from WinXX) 1 Linux Swap 1 Linux Extention 3 (I believe it is 3, as in EXT FS 3) Machine initially displayed:
Code:
[ 2.736258] Console: switching to colour frame buffer device 160x50
No init found. Try passing init= bootarg.
BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash)
Enter 'help' for a list of built-in commands.
(initramfs)_
After following some advice, I booted into Win and shutdown cleanly. Which has made the machine only say this on boot:
Code:
No init found. Try passing init= bootarg.
BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash)
Enter 'help' for a list of built-in commands.
(initramfs)_
Now, to make things a little more complicated, my home directory is encrypted. Could I just copy that over to a new install provided I can get it to mount?
i was install wine with the soft ware center when my computer crashed, now i cant uninstall it or cointinue the installation or unistall, when i do try to unistall i press the unistall icon nothing happens. when i go into the software center to try and reinstall it says waiting for other software managers to quit,
View 1 Replies View RelatedI just upgraded from Jaunty to Karmic, but once I loaded Karmic and rebooted, my computer will not complete the boot up sequence and go into any desktop. It starts the initial boot sequence with the mouse appearing and then goes to the screen that looks like it has an atom cloud. After that, the screen goes black and the mouse-arrow turns into that white rotating wheel, but it stays that way. It never actually goes into any type of operation! I tried to go from the command line and find Lucid to overlay it on Karmic and hopefully solve the problem. It just looks like to me that several of the packages I downloaded through my upgrade manager were corrupted. My computer doesn't even seem to be acknowledging my password because it gives me an error 32:must be authenticated.
View 7 Replies View RelatedI was upgrading from 10.04 to 10.10 and the computer completely froze and I restarted it thinking I would be able to restart the update where I left off (I'm new to ubuntu). However when I restart I can't get anywhere, if I boot normally the ubuntu screen comes up and then it stops with the computer name in the middle of the screen and thats it (can't do anything i can't get into shell via ctrl-alt-f1 etc..) if i use the recovery from the grub menu it loads a bunch of things then stops i can't type anything but I can switch using ctrl-alt-f1 and ctrl-alt-f7 but I don't see anything except:
under ctrl-alt-f1 the last line reads:
[2.711773] composite sync not supported
under ctrl-alt-f7: the last lines read
fsck from util-linux-ng 2.17.2
init: udevtrigger main process (421) terminated with status 1
[code]....
The computer crashed during an update and "An error occurred". The following details are provided:
E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem.
E: _cache->open() failed, please report."
So,
"michael@freegeek:~$ sudo dpkg --configure -a
[sudo] password for michael:
dpkg: parse error, in file '/var/lib/dpkg/updates/0117' near line 0:
field name '
michael@freegeek:~$"
I have installed on friday a new distro on my computer, ubuntu 10.04 lts on my 1GB ram and 3Ghz computer. It has dual booting system. Everything worked fine, i have even been using the xwindows and althought i must say that it felt a bit slow in time reaction to my typing still good enough. I left the computer running with no programs, just idle and now my computers screen is dead. I can not see anything.
I restarted the computer and in normal mode it goes black.I started in recovery mode and i manage to get to a console where I type startx and i see the next error.So I had a fresh install, i worked with the xserver (so i do not think is a driver problem) fine until i left the computer without running anything and the xserver crashed.
So I attempted to Upgrade 2 days ago from 9.10 to 10.04. I started the upgrade and left my computer alone as it said it would take several hours. When I returned to check on it, It told me the the installation had failed and it was attempting to roll back to the previous installation. Afterward I couldn't access anything on my computer. I'd click a icon and it wouldn't do anything. I manually restarted it and was greeted with a message that it couldn't boot because there was no mount specified.
Since I had backed up all my files I tried to just reinstall ubuntu. However even after I reinstalled I'm greeted with the same message.
I have a desktop computer running Linux Mint 9 with the Gnome desktop (not sure what version -- though by default Mint 9 comes with Gnome 2.30). Last night I tried adding a panel to the desktop by right-clicking on the existing bottom panel and selecting "New Panel". Please note that I've already got another panel at the top of the desktop on the left side on autohide and no expand.
When I added another panel, it placed a normal panel on the right side of the screen without any problems. When I right-clicked on the new right-side panel and selected "Properties", I changed the orientation to "top" (where there was already a panel, if you remember). After that moment, it seemed like the entire desktop environment crashed. Everything was completely unresponsive -- the only thing moving on the screen was the mouse. I couldn't do anything with the gui, not even shut the computer down.
Since the gui shutdown wasn't working, I switched to a different tty screen, logged in, and ran a shutdown command with the option to reboot. The computer shut down fine, and when it woke back up, the same problem was still there: Nothing loaded on the screen except for the background image and the mouse, which was still able to move but nothing else. I have the computer set up to automatically log me in, so I know it's not crashing before the user prefs are being loaded...
After restarting it again and getting the same result, I switched to a different tty screen, logged in, and tried messing around with stuff to no avail. I did notice, however, that the computer was becoming evermore sluggish, and something printed on the screen stating that a program had been terminated because of "not enough memory". It seemed like some process was consuming WAY too much RAM by itself or a program was accidentally forkbombing the computer. ...All because I added a panel...?
I am using Ubuntu after a BSOD error. Ubuntu is awesome, I can access all my windows files, however, I need to access my programs on windows. Here's what happened- I accidentally changed permissions after getting a virus. I then tried to do a system restore and during that process the computer crashed. When I try to boot to windows in every possible mode, I am always left with the dreaded blue screen of death.
View 3 Replies View Relatedi can only boot to MSDOs with floppy msdos bootup on A:. I want to install ubuntu 10.10 and completely erase HDD but the ubuntu disc won't bootup even when bios is set for cd only. This is older HP pavillion that I have retired but HDD scans out good so I thought i would run Ubuntu only and maybe put MS out of business but not having any luck with install. When booting from HDD error is system 32hal dll is missing or corrupt but HDD C: is 0 anyway. I just want to install so I can play with Ubuntu.
View 14 Replies View RelatedWhen I updated Linux it crashed in the middle of the update. I think there was not enough disk space. I had a windows dual boot and tried to make the Linux partition larger but in doing that a crashed grub and can't use Linux or Windows. I tried super grub but it didn't work so I tried to fix the partitions with gparted live cd. It my disk just showed up as empty. I formatted it and re installed debian but it didn't work. I can see partitions but my computer won't boot.
View 1 Replies View RelatedMy macbook pro stopped booting yesterday due to some file system corruption in the hard drive. I am able to access this drive through a linux live cd which I am using now but when I go to some folders it says "Could not enter folder /media/Macintosh HD/..." My question is how do I give myself the permissions to be able to access these files and transfer them to a network drive?
View 1 Replies View RelatedTrying to help brother whose computer quit working after he downloaded updates. Don't know Linux lingo but it looks to me like he has multiple flavors of Linux running: Gnome, ubuntu, xbuntu, kbuntu - probably more I've forgotten.
He knew nothing about computers at all and inherited a build-it-yourself computer kit that someone was throwing away. It came with a CD of Linux software. By trial and error he made it run and has managed to do some amazing things with photos and graphic design. But he downloads and launches EVERYTHING that suggests itself to him. Sometimes a thousand files at a time.
Now his machine boots but won't run any apps. It keeps giving him a message that he needs to "manually run" some "dpkg-something" but he doesn't know how to get to any sort of root or command prompt where he can enter a manual command. All he knows how to do is click icons. He's clicked them all. Now his computer is continually running screen after screen of programming language.
Is there any hope? Can we reinstall an OS without losing all of his files of graphics work? Which OS should he use on a fairly old and slow machine if his main (only?) use is graphic design?
One of my disks in my computer crashed, it was the one containing /boot and some data partitions. The other system and /home partitions were on a second disk, which is ok.
I was wondering, can I create a new /boot partition, and keep on using the rest of the system? Can I somehow do it with a chroot from a live/installer disk, run grub, and use my system again? I have another disk which I can put in the system, but there is even an unused partition on the disk which is ok (but it is rather big for /boot).
My old computer ran xubuntu and I haven't recently remembered the password. When I go to recovery mode, I see no recovery menu that would lend me to changing my password.I have also tried burning xubuntu, edubuntu , and a few other linux distributions , but they have all failed in the burning process. I have used three iso burners and they have all failed to burn.
View 1 Replies View RelatedWill I have any programs with Ubuntu is going from my computer to my laptop when it save the setting from the first computer then boot from the other?
View 7 Replies View Relatedi tried to install the kiba-dock. i wasnt successfully in any of my attempts. i would get through about half way then have to find somewhere else that had different commands and advice. how do i delete the stuff that did save as to not fill my computer with crap im not using?
View 2 Replies View RelatedI have a laptop set up for dual-boot with Ubuntu and Win7. I also have a shared partition which I mounted as the /home directory in Ubuntu. The problem occurred as I was upgrading Ubuntu from 10.10 to 11.04. In the middle of the install, my computer froze for some reason and ultimately I had to shut the computer off and restart. When I restarted the linux would freeze half-way through boot-up with a message saying that the drive was mounted. Before the message saying the drive is not mounted it gave the following error: Can not read 'etc/udev_rule.d/z80_user.rules'
When I boot up Win7 it is unable to mount the shared partition and says that the drive is not formatted. I am also unable to run the ubuntu recovery option from GRUB. It asks me to give the "root password for maintenance," but it won't accept my root password. Would the upgrade have wiped my partition??? Or am I just locked out somehow because it was in the process of changing config files?
i have new HP notebook with preinstalled windows and i'd like to have ubuntu too. But it's rather difficult. Long story:
First I wanted dual boot, Ubuntu on separate partition, but then I discovered that I have four primary partitions for windows. SYSTEM (I think nessesary for windows boot) c: (where windows is installed) RECOVERY (for restoring factory settings) HP_TOOLS (needed for right function of HP BIOS)
ok, what now? Windows partition tool let me create dynamic partition (not extended) but ubuntu partition tool can see only four partitions.
Then the wubi idea came. If I can't have dual boot wubi can be solution. But it failed too. Behavior is similar to
[URL]
that is installer say "extracting kernel" and few seconds later just close. Sadly I can't find log file (searching filesystem for word wubi and searching directory c:/users/hater/appdata/local/temp) to discover what's the problem.
Today I was moving 25,000 files from my projects folder from a windows box to the linux box when I noticed it crapped out about 60% of the way done check the server console saw a crash report all over the screen so I hot the power button and rebooted server is back up no file loss so no problem but I thought I would report a problem with SAMBA and copying vast numbers of files is at issue after the restarting the server, samba still did not come up so I restated it and it is back up fine.
View 1 Replies View RelatedNow i install the Ubuntu 10.4 64 bit on Sunfire X4170I want to save the file via SSH to this server.But i m not sure how to configure.
View 4 Replies View RelatedMy employer issues pdf files with everyones work schedules. I copy the content and save it as plain text in a file called unformatted (hope to be able to automate this step someday). Im working on a SED script that reduces unformatted to only display what I want to see and saves the result in a file Iïve named formatted. After that I have to manually copy formatted and save it with that days date as a filename e.g. 2011-02-25 or whatever day is scheduled in the pdf, for use on a mobile device (Nokia N900). I noticed that the date occurs on certain lines in the file so I added a line like:
sed -n 's/^Date: (201[1-9])/([0-1][0-9])/([0-3][0-9]).*/1-2-3/p' < unformatted >theDate
That creates a file theDate with the date in it that I wish to use as the filename for this particular instance. So I would like to skip the file formatted all together and have the sed- script write to a new file using the content of the Date as a filename, but how do I make that happen? And of course it would be more elegant if I could skip the intermediate theDate file as well.
I am using fedora 10 in two computers. Just for my own practice I sent a file to my second computer.
1st computer IP is 192.168.1.10
2nd computer IP is 192.168.1.20
[Code]....
The file has been successfully copied to the second computer but I again want to copy that file into my local computer by still sitting in my 1st computer.
[Code]....
I have two computers in my home running ferora . I want to copy a file from my 2nd computer to my local computer. Local PC:- 192.168.1.10
Remote PC:- 192.168.1.20
[root@localhost root]#scp 192.168.1.20:/home file1.txt
root@192.168.1.20s password:
scp: /home not a regular file
[root@localhost root]
16GB RAI've been running the Debian-based Proxmox VE on it for six months or so with no problems.Today I loaded Centos 5.5 x64. During a reboot, the file system crashed and fsck couldn't repair.I loaded it again, did all the updates, and loaded my applications. On about the third reboot, it crashed again and fsck couldn't fix it.I don't really know where to begin. I doubt seriously that any hardware has went bad since yesterday.
View 1 Replies View RelatedI am have problems with: gedit, abiword, mv, cp, touch, and rename.The text file was created with 'gedit' and save out of frustration with the title of 'Unsaved Document 1'.I now wish to give it a name and save it.'gedit' and 'abiword' will not save it with the name "Annie Street Arts Collective Play List 5/11", they will save it as 'Unsaved Document 1'. gedit' has work flawlessly for me up until this incident.I've never run into this before, I don't know what to start looking for. What do I look for to fix what is broken?
dave@dave:/media/seagate_/AnnieStreet$ id
uid=1000(dave) gid=1000(dave) groups=4(adm),20(dialout),24(cdrom),44(video),46(p lugdev),104(lpadmin),115(admin),120(sambashare),10 00(dave)
[code]...