My laptop sustained an injury and since the fall, it cannot progress past grub. The grub menu appears, but regardless of what option is chosen, the machine reboots (exception: memtest works fine).
View 4 RepliesI've just bought a new laptop (with no installed OS) and have (excitedly) burned a live cd for Karmic Koala 64bit: several people on the laptop manufacturer forums have got working with this particular laptop.
The live session works fine but when I install and then reboot I get 'GRUB Loading' with a flashing underscore and nothing else happens. I've found this thread and this bug report and have tried reinstalling GRUB to no avail.
I also have a live cd for 9.04 which I've tried to install and get a the same problem only now the message is 'GRUB Loading stage1.5' So I don't think it's a problem with the version of GRUB as described in the bug report thread.
I read something else that said it could be a problem with the mbr being in some way geared towards Windows but I'm not sure. I tried following those instructions but nothing happened and then I just got the same error again.
Any help would be greatly received since obviously I'm pretty desperate to get my spangly (and expensive) new machine to work. Edit: I also have a thread at the manufacturers' forums. But we're at a loss there too.
I have dual boot system - Win7pro, Ubuntu 11.04, installed Win7 1st.I need to boot from CD, but can't get past GRUB... ?
View 2 Replies View RelatedI recently tried to clone a RHEL 4 system and migrate it to some different hardware (IBM Blade to an IBM x3650M2 rack mount). I'm getting an error when it tries to boot up. It gets past the grub part, but then errors out quickly with this error code...
I've done this before, but the other system I migrated didn't have a separate "/" and "/boot" partition. I think this may be why it's having an issue. It seems like "/boot" is actually /dev/sda1 and "/" is /dev/sda2 (from booting up RHEL rescue disk). I've tried changing fstab and grub.conf, but I think I may be missing something.
Recently I did a clean install of Windows 7 on my HP Desktop because of registry issues, and wanting to clear the XP partition I was no longer using. I also had Ubuntu 10.04 as a 3rd partition which worked fine.
After the clean install of Win7, it is working perfect, I decided to put 11.04 as a second partition. I gave it 200gb of the 750gb HDD. It said it installed, but after Grub, it would just show a jumbled screen and freeze. So I figured maybe a video card issue, so I tried to install 10.10, when I would select it in Grub, my monitor would go to sleep as if it is no longer receiving a signal.
So I go back to 10.04 since it worked on the same machine before. I did everything as before, did it manually by setting EXT4, checking to format the partition, and mount point. It seemed to install just fine, but now when I select Ubuntu in Grub, it just goes to a black screen with the cursor blinking in the top left corner. I left it like that for a while too, just to see if it would eventually get there, but never did. Tried a couple more times and still the same.
OpenSUSE is starting to drive me a bit nuts. Actually what I'm trying to do is simply install VMWare server on a recent as possible SUSE and run 2 virtual machines, both the same SUSE. Of course 11.2 32 bit doesn't run VMWare server 2 so it's back to 11.1. The trouble is, 11.1 won't install properly on my PC.
The install process, booted and installed from the 11.1 network install iso image on CD, runs fine. The PC reboots from hard disk and stops at the grub prompt. I've tried the auto-repair option and reinstalled it from scratch a second time always with the same results. It seems the root partition is hosed, and that's where my understanding hits its limits. Can anyone help?
Incidentally should anyone be able to advise on the VMWare conundrum I'd also be interested. Maybe in another thread...
I'm trying to install Ubuntu on a Dell computer of mine but I can't get it to boot past the loading screen. I'm using 10.04 live CD. At the loading screen (boot, memory test, etc..) I select to boot the live CD and after that, I get a black screen followed by no signal from my monitor. My monitor is a 42" LCD TV (I had plans to turn this PC into a HTPC using Ubuntu and Boxee). I know Linux will work on this box, because it has in the past. Now, before I used to have an ATI Radeon X 1300 PCI-E card and now I am using an ATI Radeon 2900GT, and since cannot boot.
Does anyone have any idea on how I can get this to work?
I installed Ubuntu 9.10 recently using the installer (which was awesome, I've wanted to install Ubuntu again for awhile now but I didn't have any usable CDs and that wasn't available before or I was blind). I'm dual-booting with Vista 32 bit and it was working fine as far as I could tell for a week or two... but I noticed a few days ago, when I would try to boot into Ubuntu, once I selected 'Ubuntu' and then got to the screen where I'd normally ENTER on the 'linux-blahblahblah' thing, it's a command line. I can't get much out of it because half of the first word or so is too far to the left of the screen, I'm unable to read it.
I don't have the time to figure out what I'd search for for a fix for this. I'm only just now getting around to seeing if it would do it again today.
I recently bought a video card for my pc. I had it running pretty nicely on Ubuntu10.10, I started windows and later restarted and after that it wouldn't get past the Graphic cards bios. this is rather odd isn't it? I suspect it maybe dead or that my motherboard bios is stuffed but i reset that too and it still wont go.. The specs are Pentium4 Proccesor 1gb ram motherboard 661gx-m7 Nvidia GeForce FX5200 DDr128mb
View 5 Replies View RelatedThe first is I seem to have 3 GRUB installs. So whilst I update the one from my live session, the change does not appear in the boot up menu. I had installed 10.10 from a CD into a different partition (sda6), but that will not boot, so I have just deleted this and done another grub install and update. The kernel I am using has just been updated from 10.04 to 10.10 too, and it is this that I use and the Grub I have been working on (sda5).
[Code]...
I installed 11.04 after Windows 7. when the GRUB boot menu starts up there is an option for Win 7 boot but it will not boot windows. When that option is selected the screen changes colour for 2 seconds and then reverts to the GRUB menu. Ubuntu boots fine.I downloaded the Boot Info Script and ran it, the results are
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================[code].....
I updated yesterday and now when I start my laptop it goes in to grub rescue mode. I have booted from a 'live cd' and thought I could repair grub from there. In gparted however the partition with ubuntu (sda1) is seen as unknown file system, in terminal when I list the partition table it shows up as FAT16 type. When I try a grub-install it gives this error message:
[Code]....
I have 2 hard disks. sda,sdb
In sda, I have 4 partitions, and I have windows 7 in one of the extended partitions [not in the primary partition].
In sdb, I have 3 partitions. 2 for storage, and 1 10GB drive for Ubuntu. Again, Ubuntu is not of a primary partition.
I had ubuntu 10.04 running on that for a long time. However, I wanted to reinstall ubuntu and use 10.10.This is what I did EXACTLY:Booted from Ubuntu install CD
Chose advanced istall
Selected sdb3 for Ubuntu
I installed GRUB2 on the SAME partition as Ubuntu aka sdb3 Installed then rebooted
I can boot into Ubuntu fine, but whenever I select Windows 7 bootloader from the GRUB menu, the screen goes black, and my PC reboots.
Boot Info:
Code:
Boot Info Script 0.55 dated February 15th, 2010 [code]....
ls: reading directory sda6/: Input/output error
I have tried the testdisk/update-grub method, but it didn't work.
So my computer has ubuntu 9.10 installed 1st and I want to install win 7 in a separate partition. Basically, ubuntu 1st, win 7 later so far from what I learned from search results, grub 2 have problem with win 7 installed later and what was recommended was install win 7 before ubuntu. how ever I do not have the time to start over again because there are too many things to back up or install again. can I simply revert grub 2 to grub 1 again and resolve the problem?
View 7 Replies View RelatedI'm running Ubuntu on my desktop. I have a dual-boot option between Ubuntu and Windows Vista. When I woke up this morning, my Ubuntu screen was frozen so I attempted to reboot...but I couldn't get past the boot screen. I can get into Windows just fine, but selecting Ubuntu just keeps cycling me through the initial boot screens over and overI am a still a beginner so please talk to me as though I were a child. Otherwise I'm sure I'll be confused.
View 3 Replies View RelatedI was installing sqeeze i386 on my laptop VOSTRO 1400 and got this the 'grub-pc' package failed to install into /target/. without the GRUB boot loader, the installed system will not boot.
View 3 Replies View RelatedI had a dual boot machine with fedora 12 and windows vista and I could use grub boot-loader to switch between two. Few days ago windows got corrupt and I have to reinstall it. I put windows 7 now and as usual it erased grub. So to reinstall I put the fedora 12 installation CD on and followed some usual setup steps. When I got the command line I issued the command "grub-install /dev/sda" (sda not hda because It showed bunch of sda, sda1..) but surprisingly it said grub command not found. I remember doing it before while it worked fine.
View 4 Replies View RelatedI just recently installed 11.04 fresh onto my computer. Everything's been working great and i've been enjoying the new interface immensely. However, today when i booted my pc up, after i entered my password and logged in, I'm stuck at the splash screen. I can move the mouse and i have the default 11.04 image up on the screen, but ive got no menus or taskbars and i know it hasn't logged in yet, because my wallpaper isnt up. I've restarted a number of times and this keeps happening.
View 1 Replies View RelatedI've had FC11 x86_64 running for awhile based on an upgrade from FC10. I powered down one night then when I tried to boot the next day the system just sat at the BIOS prompt "Verifying DMI pool data...". I opened the case to check all cables - all fine. I've run a memtest, also fine. I then suspected a bad HDD so I ran the Seagate tools from the Ultimate Boot CD (fast test) and both HDDs came up fine. BIOS can see both disks fine, too. I stuffed around with fixmbr and fixboot and got one step further, with it sitting at "invalid operating system" or something like that. I was able to use Linux rescue mode to mount the old filesystems fine.
Today I've completely blown away all my old partitions and started from scratch. After successfully completing an install with custom disk layout (identical to old layout) it still just sits at "Verifying DMI pool data..". Do I have a bad sector in my boot block? Possible BIOS issue? Is there some tool to re-write the boot block?
I just recently put Ubuntu 10.10 for ppc on a Cd-R and installed it onto an old Mac I had found. The installation seemed perfectly fine I booted the computer and was presented to boot with two options "Linux" and "old" or to press enter and boot default. I had decided to boot default and it reaches the splash screen where the loading bar advances two dots and then completely stops.
View 7 Replies View RelatedI installed Ubuntu 10.04 LTS on a machine with 8.04 LTS, and have dualboot between those i system.The problem is when a start a get a message:'Boot error'If I hit 'Esc' I get to the Grub -meny and can boot as normal.
View 1 Replies View RelatedI'm trying to dual boot Win7 and Ubuntu WITHOUT using Grub. This is to support Bitlocker encryption.
I followed this guide, and now when I select Ubuntu I get a Grub> prompt and no ubuntu.
I feel like I'm halfway there, I just need to get Grub to load correctly or something.
I recently obtained a built machine that has an Intel motherboard. The computer had Windows XP on it, but the owner wanted me to format it completely before I started using it. Nbd, I just used a gparted live cd and formatted the 200gb Seagate it came with.
Well now, I think the drive is dead or something, because whatever machine I put it in, it doesn't boot.
So, being out the 200gb drive I was hoping to use, I just threw in a spare drive I had laying around. (This is isn't the point of this thread.)I planned to use the machine as a basic server, so I made a Debian install CD and just let the installer run (completing the appropriate prompts). However, usually towards the end of the installation, the machine completely kills itself. It just randomly shuts off. No message about it, just, "Click!" and the machine's dead. I know the installation doesn't complete, I've used the CD on other machines, and Debian will tell you that it's finished and getting your consent before turning off.
Upon trying to reboot the machine, after a few seconds of POST messages, it kills itself again. And again. What I've figured out is pressing the reset button a few times during boot usually gets to go eventually. I swapped the power supply out, but that didn't make a difference. I've tried different RAM. I swapped out the CMOS battery. Nothing seems to be working.. As of right now, it does not kill itself, but it will turn on and immediately it hangs on a a screen that says Nvidia Vanta VGA BIOS and some other video card info. After it started doing this is when I changed the CMOS battery.
The board is older, an Intel D845BG. The first power supply was 300w, as was the second. I also tried a 250w one with no results. The standby light on the motherboard does go on as soon as it gets power. I tried a different video card, just as a "why not?", and the machine still didn't boot, however that first POST line changed to 3D Prophet II, etc. or the name of the video and it reflected the change in video memory.
I updated from Ubuntu 9.10 to 10.04 via Ubuntu updater. Worked nicely. Until I had to use Win 7 for a moment, so I went to the Grub boot menu and picked Win 7. Nothing is happening. Just a black screen with blinking underscore to the top left corner. I never had this problem with 9.10, so I am confused. I tried looking around and nothing helped. Be noted that I am an amateur with Ubuntu coding and installing. I did hear that this is already a common issue now.
View 6 Replies View RelatedMy Slackware's display suddenly got hanged with just a black screen and a mouse pointer visible not even the Ctrl+Alt+Backspace worked.So I switched off my system by pushing the button on the CPU .
After that when I tried to boot into my system it wont boot past going multiuser with below error messages
Code:
Hanging @ starting
Code:
Though I can login when trying to boot through singleuser but when I try to
Quote:
startX
It again gets stuck at the above errors
I have 9.10 installed and working like a charm, due to the problems I had last time, I decided to leave an empty space to try and test upcoming editions, but I can't install it!
I get two error messages and can't get past the point of partition assignment.
Here's the screenshots. I'm trying to install on the free space.
I recently reinstalled Ubuntu 11.04 "Natty Narwhal" Daily 20101124 on my netbook and decided to place /home on an external 500GB SimpleTech hard drive because the netbook's internal SSD is only 8 GB.
Well, when I boot into the main SSD to try and test out the system, I have two problems:
First of all, GRUB is unstable and won't always find the kernel to boot. In particular, I have to hit <Enter> one, two, even three times just for GRUB to find the kernel and boot the system.
However, that's not all:
When the system is booting, I wait endlessly for X to start. It doesn't. The Plymouth splash screen stays there and it looks like the system is endlessly booting with no progress.
Suggest chrooting into the drive and doing a "sudo apt-get dist-upgrade" by any chance? This being in order to make the system on the drive up-to-date? If so, I will see if it boots.
I have XP, Win7 Pro and F 11 installed. Before I installed F 11, Win 7 boot mgr was working fine. I then installed F 11 and I went to System/Admin/bootloader to edit it and it wouldn't bring up the boot loader. In the attachment was the error msg. Now my only option when I boot up is F 11.
I do not have access to the Win 7 DVD only the F 11 install disk since I am on a fishing trip and need to use Win 7. How can I repair to the grub boot loader to boot into Win 7?
I just set up a dual boot on a system with fedora 12 and XP. XP in on one hard drive (sda) and Fedora on a second hard drive (sdb).
I installed grub on the Fedora disk so as to not touch the windows disk at all.
Prior to installation, in the bios, I set the Fedora disk (sdb) first in the boot sequence, and then XP (sda) so that the grub loader would boot up by default. (If I set the windows drive first then the system bypasses grub and loads straight into windows.)
My system can now boot up into Fedora fine, but if I select windows from the grub loader menu I just get a blinking cursor - windows will not boot.What do I have to do so that grub can boot into XP?
I have a Fedora 11 PC, which I want to connect to the ldap server at my organisation. When my /etc/ldap.conf file is in place, the machine will not boot past "starting system messagebus" and just hangs there. I have to press the reset button, and boot it into single user mode, and remove /etc/ldap.conf, and only then will it boot. The ldap.conf file is fine, I think, because if you boot the machine up without ldap.conf, then log in.
I can put ldap.conf in place and immediately I can see all the user accounts etc. from the ldap server. If I then reboot, with ldap.conf in place, it hangs on boot again. I found a bug report for FC5 which stated this problem, but there was no solution. There was a workaround, making messagebus starting later in the boot process (move it from S22 to S27 in rc3/5.d), but that didn't help in my case.
My ldap.conf contains this (I've removed my actual ldap info):
host my.server.ip.addr
base dc=my,dc=dn
uri ldap://ldap.mydomain.com
ssl no
tls_cacertdir /etc/openldap/cacerts
pam_password md5
bind_policy soft
As I say, I think the ldap config is fine, because you can start it manually once the machine has booted up without an ldap.conf in place. I lifted it from a Centos client, which works fine and doesn't have the same problem with booting that Fedora does.