Fedora :: Won't Boot Past BIOS ?
Jul 28, 2009
I've had FC11 x86_64 running for awhile based on an upgrade from FC10. I powered down one night then when I tried to boot the next day the system just sat at the BIOS prompt "Verifying DMI pool data...". I opened the case to check all cables - all fine. I've run a memtest, also fine. I then suspected a bad HDD so I ran the Seagate tools from the Ultimate Boot CD (fast test) and both HDDs came up fine. BIOS can see both disks fine, too. I stuffed around with fixmbr and fixboot and got one step further, with it sitting at "invalid operating system" or something like that. I was able to use Linux rescue mode to mount the old filesystems fine.
Today I've completely blown away all my old partitions and started from scratch. After successfully completing an install with custom disk layout (identical to old layout) it still just sits at "Verifying DMI pool data..". Do I have a bad sector in my boot block? Possible BIOS issue? Is there some tool to re-write the boot block?
View 4 Replies
ADVERTISEMENT
Jul 1, 2011
I recently obtained a built machine that has an Intel motherboard. The computer had Windows XP on it, but the owner wanted me to format it completely before I started using it. Nbd, I just used a gparted live cd and formatted the 200gb Seagate it came with.
Well now, I think the drive is dead or something, because whatever machine I put it in, it doesn't boot.
So, being out the 200gb drive I was hoping to use, I just threw in a spare drive I had laying around. (This is isn't the point of this thread.)I planned to use the machine as a basic server, so I made a Debian install CD and just let the installer run (completing the appropriate prompts). However, usually towards the end of the installation, the machine completely kills itself. It just randomly shuts off. No message about it, just, "Click!" and the machine's dead. I know the installation doesn't complete, I've used the CD on other machines, and Debian will tell you that it's finished and getting your consent before turning off.
Upon trying to reboot the machine, after a few seconds of POST messages, it kills itself again. And again. What I've figured out is pressing the reset button a few times during boot usually gets to go eventually. I swapped the power supply out, but that didn't make a difference. I've tried different RAM. I swapped out the CMOS battery. Nothing seems to be working.. As of right now, it does not kill itself, but it will turn on and immediately it hangs on a a screen that says Nvidia Vanta VGA BIOS and some other video card info. After it started doing this is when I changed the CMOS battery.
The board is older, an Intel D845BG. The first power supply was 300w, as was the second. I also tried a 250w one with no results. The standby light on the motherboard does go on as soon as it gets power. I tried a different video card, just as a "why not?", and the machine still didn't boot, however that first POST line changed to 3D Prophet II, etc. or the name of the video and it reflected the change in video memory.
View 9 Replies
View Related
Mar 22, 2011
I recently bought a video card for my pc. I had it running pretty nicely on Ubuntu10.10, I started windows and later restarted and after that it wouldn't get past the Graphic cards bios. this is rather odd isn't it? I suspect it maybe dead or that my motherboard bios is stuffed but i reset that too and it still wont go.. The specs are Pentium4 Proccesor 1gb ram motherboard 661gx-m7 Nvidia GeForce FX5200 DDr128mb
View 5 Replies
View Related
Jun 11, 2010
I recently tried to clone a RHEL 4 system and migrate it to some different hardware (IBM Blade to an IBM x3650M2 rack mount). I'm getting an error when it tries to boot up. It gets past the grub part, but then errors out quickly with this error code...
I've done this before, but the other system I migrated didn't have a separate "/" and "/boot" partition. I think this may be why it's having an issue. It seems like "/boot" is actually /dev/sda1 and "/" is /dev/sda2 (from booting up RHEL rescue disk). I've tried changing fstab and grub.conf, but I think I may be missing something.
View 4 Replies
View Related
Aug 18, 2009
I have a Fedora 11 PC, which I want to connect to the ldap server at my organisation. When my /etc/ldap.conf file is in place, the machine will not boot past "starting system messagebus" and just hangs there. I have to press the reset button, and boot it into single user mode, and remove /etc/ldap.conf, and only then will it boot. The ldap.conf file is fine, I think, because if you boot the machine up without ldap.conf, then log in.
I can put ldap.conf in place and immediately I can see all the user accounts etc. from the ldap server. If I then reboot, with ldap.conf in place, it hangs on boot again. I found a bug report for FC5 which stated this problem, but there was no solution. There was a workaround, making messagebus starting later in the boot process (move it from S22 to S27 in rc3/5.d), but that didn't help in my case.
My ldap.conf contains this (I've removed my actual ldap info):
host my.server.ip.addr
base dc=my,dc=dn
uri ldap://ldap.mydomain.com
ssl no
tls_cacertdir /etc/openldap/cacerts
pam_password md5
bind_policy soft
As I say, I think the ldap config is fine, because you can start it manually once the machine has booted up without an ldap.conf in place. I lifted it from a Centos client, which works fine and doesn't have the same problem with booting that Fedora does.
View 6 Replies
View Related
Jul 15, 2009
I'm trying to automate OS installation. I've setup PXE and able to do network installation. For installation, I'm changing the BIOS boot order to boot from network.Once the OS installation is over, I need to manually change the BIOS boot order to boot from hard-disk. Can BIOS boot order be changed using programs/command-line so that i can eliminate human intervention in the installation process by changing back to the original boot order by program/commands?
View 2 Replies
View Related
Sep 30, 2010
I'm running Ubuntu on my desktop. I have a dual-boot option between Ubuntu and Windows Vista. When I woke up this morning, my Ubuntu screen was frozen so I attempted to reboot...but I couldn't get past the boot screen. I can get into Windows just fine, but selecting Ubuntu just keeps cycling me through the initial boot screens over and overI am a still a beginner so please talk to me as though I were a child. Otherwise I'm sure I'll be confused.
View 3 Replies
View Related
Jul 30, 2011
I have dual boot system - Win7pro, Ubuntu 11.04, installed Win7 1st.I need to boot from CD, but can't get past GRUB... ?
View 2 Replies
View Related
Jul 14, 2011
My laptop sustained an injury and since the fall, it cannot progress past grub. The grub menu appears, but regardless of what option is chosen, the machine reboots (exception: memtest works fine).
View 4 Replies
View Related
Jan 30, 2010
I've just bought a new laptop (with no installed OS) and have (excitedly) burned a live cd for Karmic Koala 64bit: several people on the laptop manufacturer forums have got working with this particular laptop.
The live session works fine but when I install and then reboot I get 'GRUB Loading' with a flashing underscore and nothing else happens. I've found this thread and this bug report and have tried reinstalling GRUB to no avail.
I also have a live cd for 9.04 which I've tried to install and get a the same problem only now the message is 'GRUB Loading stage1.5' So I don't think it's a problem with the version of GRUB as described in the bug report thread.
I read something else that said it could be a problem with the mbr being in some way geared towards Windows but I'm not sure. I tried following those instructions but nothing happened and then I just got the same error again.
Any help would be greatly received since obviously I'm pretty desperate to get my spangly (and expensive) new machine to work. Edit: I also have a thread at the manufacturers' forums. But we're at a loss there too.
View 9 Replies
View Related
Jul 13, 2011
I just recently installed 11.04 fresh onto my computer. Everything's been working great and i've been enjoying the new interface immensely. However, today when i booted my pc up, after i entered my password and logged in, I'm stuck at the splash screen. I can move the mouse and i have the default 11.04 image up on the screen, but ive got no menus or taskbars and i know it hasn't logged in yet, because my wallpaper isnt up. I've restarted a number of times and this keeps happening.
View 1 Replies
View Related
Oct 14, 2010
I've got two laptops running Ubuntu. Both have had Lucid installed from the live cd. I have upgraded one of them to Maverick. Both distributions are running great after they boot up, but I haven't experienced any faster boot times with either distibution. Both boot to Bios and then the screen goes black with a blinking cursor in upper left corner of the screen. The black screen remains for 30 to 45 seconds and then I get the Ubuntu splash screen for maybe 5 seconds, and then desktop. Why am I not seeing faster boot times? I realize 45 to 60 seconds is good compared to other os's, but I anticipated much faster boot times. Shut down on the other hand is quite fast at maybe 5 to 10 seconds. Does anyone else get this black screen on boot? Seems like wasted time cause I can't tell what's going on during the time there is a black screen. This is not a real big deal breaker, as I don't reboot very often, but I just wonder why bootup isn't faster.
View 7 Replies
View Related
Sep 4, 2010
I'm trying to install Ubuntu on a Dell computer of mine but I can't get it to boot past the loading screen. I'm using 10.04 live CD. At the loading screen (boot, memory test, etc..) I select to boot the live CD and after that, I get a black screen followed by no signal from my monitor. My monitor is a 42" LCD TV (I had plans to turn this PC into a HTPC using Ubuntu and Boxee). I know Linux will work on this box, because it has in the past. Now, before I used to have an ATI Radeon X 1300 PCI-E card and now I am using an ATI Radeon 2900GT, and since cannot boot.
Does anyone have any idea on how I can get this to work?
View 2 Replies
View Related
May 18, 2011
I just recently put Ubuntu 10.10 for ppc on a Cd-R and installed it onto an old Mac I had found. The installation seemed perfectly fine I booted the computer and was presented to boot with two options "Linux" and "old" or to press enter and boot default. I had decided to boot default and it reaches the splash screen where the loading bar advances two dots and then completely stops.
View 7 Replies
View Related
Feb 15, 2011
My Slackware's display suddenly got hanged with just a black screen and a mouse pointer visible not even the Ctrl+Alt+Backspace worked.So I switched off my system by pushing the button on the CPU .
After that when I tried to boot into my system it wont boot past going multiuser with below error messages
Code:
Hanging @ starting
Code:
Though I can login when trying to boot through singleuser but when I try to
Quote:
startX
It again gets stuck at the above errors
View 11 Replies
View Related
Apr 16, 2010
Well today I decided that I couldn't wait for the offical release of 10.04 LTS, so I upgraded from 9.10 to 10.04 LTS Beta 2. After realizing that many problems had come with that update, I decided to just format my Ubuntu partition and reinstall it. Somehow my GRUB stopped working from when I formatted Ubuntu, so I whipped out the old Toshiba recovery disk for Windows Vista 32bit. After many attempts to have the recovery portion of the disk fix all of my problems and seeing no results, I decided that reinstalling Ubuntu (and GRUB) might make everything all better. Well it didn't. Grub shows my Windows partition but fails to boot it. After selecting it, it goes to a blank screen and stops responding. And to add to all of my problems, my BIOS has changed slightly. It no longer shows/or responds to F2 or F12 when I tried to give another try at that Toshiba recovery disk. That kinda sucks since I can't choose what to boot. Please help me!! I really don't want to have to format my entire hard drive and try to install Windows Vista again (Not that Vista is anything anyone should love) I have many expensive programs that can only be activated a certain amount of times. I don't even think that I could reinstall Vista since my BIOS won't let me boot the CD/DVD drive.
View 7 Replies
View Related
Jan 28, 2010
OpenSUSE is starting to drive me a bit nuts. Actually what I'm trying to do is simply install VMWare server on a recent as possible SUSE and run 2 virtual machines, both the same SUSE. Of course 11.2 32 bit doesn't run VMWare server 2 so it's back to 11.1. The trouble is, 11.1 won't install properly on my PC.
The install process, booted and installed from the 11.1 network install iso image on CD, runs fine. The PC reboots from hard disk and stops at the grub prompt. I've tried the auto-repair option and reinstalled it from scratch a second time always with the same results. It seems the root partition is hosed, and that's where my understanding hits its limits. Can anyone help?
Incidentally should anyone be able to advise on the VMWare conundrum I'd also be interested. Maybe in another thread...
View 6 Replies
View Related
Nov 27, 2010
I recently reinstalled Ubuntu 11.04 "Natty Narwhal" Daily 20101124 on my netbook and decided to place /home on an external 500GB SimpleTech hard drive because the netbook's internal SSD is only 8 GB.
Well, when I boot into the main SSD to try and test out the system, I have two problems:
First of all, GRUB is unstable and won't always find the kernel to boot. In particular, I have to hit <Enter> one, two, even three times just for GRUB to find the kernel and boot the system.
However, that's not all:
When the system is booting, I wait endlessly for X to start. It doesn't. The Plymouth splash screen stays there and it looks like the system is endlessly booting with no progress.
Suggest chrooting into the drive and doing a "sudo apt-get dist-upgrade" by any chance? This being in order to make the system on the drive up-to-date? If so, I will see if it boots.
View 15 Replies
View Related
Jan 26, 2011
I have installed Ubuntu 10.10 Minimal on a 2GB USB using CLI and it is working very well after adding a few applications. But this USB will be used only on machines other than my own - likely with Windows as the only OS. And it is not comfortable for me to go into the BIOS of a strange machine to change the order of booting and afterwards go back to reset the order , especially with the owner looking on, obviously worried, and wandering whether his machine will still be working!
So my question: Is there any way to boot from a USB without having to go into the BIOS? code...
View 1 Replies
View Related
Sep 14, 2009
I installed the following packages in order to install kscope in my Fedora 11.1. kdelibs-devel2. kdebaseAfter I restarted the system, the options of GNOME and KDE sessions come to the login screen. Also, when I enter the login credentials, the username and password are accepted, the login chime sounds, and i m thrown back to the login screen
View 3 Replies
View Related
Sep 19, 2010
im on an old (8 years?) hp that doesnt support booting from usb. will a bios upgrade change that?
View 1 Replies
View Related
Oct 16, 2010
I understand this is not directly an ubuntu issue, but this arose as I was trying to install ubuntu, so I'm hoping some kind souls on here would be good enough to help anyway.
I've in the past installed ubuntu on to my PC using a CD, but this time I thought I'd try creating a USB startup disk.
I was required to set up the BIOS to change the boot order so I can boot from the USB flash drive.
The problems arose when I pushed the 'DEL' key (the correct key for my motherboard) to access the BIOS setup. When doing this the computer completely froze and would not progress any further to boot. It would still boot normally from the HDD provided I didn't try to enter the BIOS.
Looking on the internet for a solution I tried using the motherboard jumper to reset the CMOS. Now I can't boot up the computer at all. I get a message saying 'CMOS checksum error - Defaults loaded' then it asks me to press F1 to continue. I try this, but nothing happens. Clearing the CMOS has made things worse as now I can't get the computer to boot at all.
Have I killed my motherboard somehow? I've tried using a different keyboard (one USB and the other a USB keyboard but with an adaptor to connect it to the P/S2 port).
On further investigation any key press from the keyboard is enough to freeze the computer at whatever point.
My motherboard is an WinFast NF4SK8AA with AMD Athlon processor and 4Gb of mem.
View 4 Replies
View Related
Nov 16, 2010
i have ubuntu 10.04 server on a usb (it is an .img file) , and i.m trying to install it on an ancient machine (64mb of ram to be exact), and it has no usb option in the bios menu.
View 8 Replies
View Related
Jan 15, 2011
I have a 7 port USB hub, and have more than 2 usb storage devices, but in BIOS it only allows me to run off of e:/ f:/ and h:/ (h:/ is my built-in card reader) I want to be able to add new boot options, or at least 1 more for G:/, is this possible?
View 3 Replies
View Related
Feb 21, 2011
I have a recent ACER laptop that I used to use with Ubuntu only, but Ubuntu has crashed and won't boot anymore. I tried booting it via the live CD to try and recover my files before re-installing everything, but the CD won't run automatically.
View 3 Replies
View Related
Apr 18, 2011
My laptop is windows xp pro, I need to install ubuntu, so I kept Ubuntu CD into my lap and restart, again it shows windows xp, some body told "BIOS is not set to boot from CD or DVD drive".
View 2 Replies
View Related
Feb 1, 2011
I have second disk connected internally, and for matted to ext4, though it shows up, I cannot past to it or copy from it, it is full mounted!
View 4 Replies
View Related
Apr 16, 2011
I've just installed Fedora 14. When i try to change the resolution i cannot get past 1024x768. My graphics card is the onboard Intel g41 express chipset which is - for sure -capable of bringing a higher resolution than this. I googled on this and found that i have to edit the xorg.conf file to add the required resolution mode with no luck. Moreover, I learned that Fedora has dropped the xorg.conf usage since the 10th release, which further implies that there should be a more elegant solution than editing this file. Is is a drivers problem? i searched for a linux drivers for this card with no luck.
View 2 Replies
View Related
Jul 7, 2014
I have been running Jessie on an EFI motherboard for a while, booting just fine from a GPT formatted partition on my 3TB hard drive.
I had to re-purpose that PC, and put the hard drive into a different system that uses a BIOS instead of EFI.
Now when trying to boot, I get a text at the top of the screen that says:Code: Select allGRUB ...so it finds GRUB, but nothing ever happens. <CTRL>+<ALT>+<DEL> resets the system.
parted 2.3 says:Code: Select all 1 1049kB 3001GB 3001GB ext4 boot
2 3001GB 3001GB 32.5MB bios_grub, legacy_boot(I set the legacy_boot flag trying to fix this problem, but that flags the partition, not the MBR)
Is my problem that the "bios_grub" partition is at the end of the disk instead of the beginning?
I have read that newer versions of parted allow you to toggle the "pmbr_boot" flag directly in the MBR by using the command "disk_toggle pmbr_boot" or "disk_set pmbr_boot", but parted 2.3 apparently doesn't support this.
The pmbr_boot flag in the MBR seems more likely to be the problem than the partition at the end of the disk.
Do I need to find a newer version of parted that supports the pmbr_boot flag for MBR (if so, which version please), or do I need to move the partiton to the beginning of the disk?
View 1 Replies
View Related
Aug 29, 2010
Under Windows XP in the C Drive, I've downloaded PLoP boot manager to force the USB boot. I've tried about a thousand things and I get a different error message at different times from each attempt. I've got all of those documented, and I imagine I'll need to post them. I'm just not doing it quite yet as sometimes I give too much information and I really feel that I'm being an idiot here, missing something simple.
I'd like to install openSUSE onto the D Drive, using the USB and PLoP to boot it. I've downloaded openSUSE's torrents for all iso's (Net, DVD and LiveKDE). In order to get those files onto the USB, I first format to FAT32. I've tried UNetBootIn, LiLi, and mounting the iso on Daemon Tools and then copy-paste into the hard drive. None of these work and they all give different errors.Is this even possible, am I wasting my time? This is getting incredibly frustrating as I've been at it for nearly a week.
View 9 Replies
View Related
