I am planning to implement a backup strategy to backup my basic system ,applications installed and the different configurations also of the personal data (From documents , music etc , to my photos , 3d design files etc) I have a Hard disk (well SSD really) of 120GB for the system (8GB Swap,30GB / and 60GB /home), one 750GB Hdd for save my music,photos,images and other things not related to 3d design , and i am going to buy tomorrow 2 hdds more , one of 1 TB for use only for 3D design , for save final images , models , textures , 3d related documentation and like , and one 1,5 TB HDD to use as backup of the personal data and the system. (One 500 Gb partition for backup system, and hold clonezilla images, and one for backup the data for example)
By the moment what i have done , is use clonezilla to save a image of / and another image of /home in my other hard disk (I save a image of system installation in ext3 prior migrate to XFS , and later , one image with the system migrated to XFS) and i have used Rsync to copy both / and /home to two partitions in the other hard disk , so have a copy also of clonezilla images. I think use clonezilla ,is useful to do each some time,so be able to have a fast way of recover the system , but i would like to implement a daily or weekly backup of my data and system , for example making a full backup and then incremental backups.
Perhaps for backup data this is a good aproach , but for backup configuration files , and the system in general ? , i mean , if i backup the things while using the system , could some files being not backuped , because being used ?
If i decide to install,for example, my new Wacom Intuos4 M tablet, for that i need to install the kernel source , and compile some modules and things by hand (because repository packages of wacom are a bit older than need for new intuos4) ,that will change my system and add new libraries and files to it.
If i make a full backup , and then incremental backups , each some time , if i have a problem or make a mistake when installing it or doing something , i have only to restore the backups via live cd, no ?
But if some files are being used , that, will not be backuped, so when restore it , that files , will be modern versions compared to the backup (perhaps that files would not be later modified , but who knows) and i could have problems no ? Perhaps a solution is have a clonezilla image of the system prior the first full backup ,and restore it fist to have a new installation ,with all files , used included, and then restore the full backup of the 1h later ,and the incremental backups until the moment all gone bad , to have the system working again no ?
So i don't have to be worried by files used by the system as long as also of doing online backups , also have a exact image of my system , that will make me able to restore it in some minutes and don't have to install all , by hand and remember what i had installed. Also that lets me to backup only , at least when doing full and incremental backups , the directories of the system that are dynamic, and change , and those that are static , backup them only one time.
After I spent some time discovering The BIG BANG of Universe and The Meaning of Life :
I managed somehow to create a script to make some backup of files on server and TAR it and then FTP the archive to another location FTP server and then emails result.
It also measures time needed to complete it and deletes archive older than XX days (set in find -mtime +20) and makes incremental backup every weekday and FULL on Sundays (which suits me bcoz no heavy load).
Files for TAR to include and exclude are in txt files listed each line separate name:
I am trying to restore my system to Ubuntu 10.10, using a system backup made with REMASTERSYS. When I reboot, I get the message: GRUB error:15 I found many threads discussing this issue, most notably here: [URL]
At work we have a linux based ip phone system. Now this system was buggy for a bit but we now have it working perfectly. As it is we clone this hard drive and on backup I clone it back. This works but if for whatever I'm not in the office the backup can't go through because apparently no one can read the VERY simple instructions. What i would like to do is burn a cd with a copy of the hard drive (this configuration will change once every 6-12 months at maximum) as well as a VERY minimal linux install.
The goal is they stick the cd in and reboot. The system loads the super minimal linux then it runs a batch file that clones the portion of the CD that has the hard drive onto the system then it asks the nice moron....err....person...to remove the cd and reboot All I need is a a bootable system to a bash script that will run live from cd. I can make the nice bash script that puts to the screen a nice ascii graphic telling the lucky sap it's running and to come back in a little bit to make sure it's done.
Now i want to create a resue disk for my Centos5.5i think mondoArchive tool is best for this job.i installed mondo by usingyum install mondoand it is intalled successfullybut i cant see it inApplication>sytem toolshow can i run it in a GUI mode.
Recently I've backupped my entire /home folder on my laptop with grsynch trough ssh.Since I already had a simply text file containing all installed programs, I figured 'then, when i go from the backup trough my desktop, all my program settings will be restored if i run the txt file to install all those programs first.So i installed al programs, then i went from backup to /home on desktop, logged out and back in. Started up a random program (tried thunderbird and filezilla) and no settings were to be found.In retrospect, docky did start, but didnt have all the launchers i had on my laptop. so that could have been a clue.
I'm looking for a simple solution to backup my CentOS Server (5.x) on a daily base to a mounted disk. I found the glastree tool but I have no clue if it will work on CentOS.All recommendations, tipps, hints and maybe scripts are welcome. Unfortunatelly I'm an Linux newbie and starting with Linux CentOS a couple of weeks ago
easy way to backup everything the system with its settings. I have seen many posts regarding this on google and in this forum but it was a bit hard for me.[URL]...
I have been using Ubuntu for a while now though not heavily. I want to try out the new 10.04 as I was not all that happy with 9.10. I would like to backup my entire Ubuntu System so if the upgrade goes south like it probably will and has every time in the past that I can restore it easily. Now in Windows I would use either Paragon Backup or Comodo Backup. So, I was wondering if there is a complete backup system like this for Linux. I have looked at several, but most only back up the home directory or specific directories.
I have an external hard drive and have been using it to backup my multiple computers for a while now, but because it needs to be plugged into the mains, it is a pain to move it from one computer to the next. So I've decided to try to set up a SSH backup system that will allow me to backup without having to move the drive.
I would like to reinstall my whole 10.04 system, because I feel, that it is pretty massed up, as a beginner I also made some mistakes and there are some unnecessary errors. I would like to mostly keep my installed apps and settings. Is there any way to recover/export them? home folder?
I removed windows completely from my Dell Inspiron N5010 and installed Ubuntu 10.04.1 64bit. In windows I have the option to create the system image of system's current state so that if something goes wrong I could easily restore my system using that image( I am not talking about windows Restore facility). I wanted to know that if there is something available in Ubuntu also. I cant use Dell recovery media creator as I have deleted recovery partition. I have already used Remastersys and it also did its job well but after restoring my Graphics card driver did not work well.
Custdistro means it will backup your all/thing without/home and customback means it will backup all thing in /. It can create an ISO if your backup is less then 4 GB. Well, i've made a lot of changes to ubuntu 10.04 and now i love it! It does everything i'll want from any computer. This took me a lot of time, follow several tutorials and destroy the entire system a couple of times. The last one is a BIG problem because restoring my system to the state before i ****** all up takes some time again.Do any of you guys know how to backup all my system settings, programs and files? So that if i corrupt my system again i can restore it to be exactly as my current state?
I am relatively new to Linux, What files/Folders should be backed up and what ones are not necessary?This is my 2nd install of 11.04 because I screwed the 1st one, so Im not sure what to backup to prevent having to reinstall if I screw up again.
im trying to clone my ubuntu system installed in a laptop in case the laptop crashes.
But, first of all: when i try to restore the system in a new PC, could be incompatibilities because the hardware of the broken laptop and the new laptop is different?
I dont mind if i have to buy another laptop with the same processor type (i386, etc), but, for example, the type of the RAM could be cause of problems?
I'm running CentOS 5.4 on a Dell Xeon PowerEdge 1850. I want to back up an RHEL 4x web/mail server, 2 WinXP workstations, and 2 Ubuntu desktops....and I want them to go to my Dell LTO2 tape drive. What are my best options? I want a series of incremental daily backups and then a different series of weekend full backups.
I should have clarified that this is all in a small office LAN environment and that the RHEL web & mail server is another PowerEdge 1850 that is co-located with the CentOS server (same rack).
I have a CentOS 5.4 installation with 2 Hard Drives [Disk 1 and Disk 2]. I have mounted the Disk 2 as a ext3 partition called /backups within the OS installed in Disk 1 [other partitions on Disk1 include / and SWAP].
I have a CRON job that creates specific backups of Disk 1 onto Disk 2.
This works fine.
My Problem : I wish to move Disk 2 to a New Box on which Iam planning to load the same CentOS 5.4.
My Questions :
1. Will Disk 2 be immediately identified in the new install and I add it as another partition in the new install ?
2. Do I have to perform any specific set of operations to integrate Disk 2 into the new Box ?
3. this kind of migration of a Disk partition contained on a Seperate Hard Disk cannot be migrated to a New install CentOS Box ?
i want backup from my system fdora11 64bit .at that i worked on this command, rsync -avz soursepath /media/destination path but it is not working correctly
I am new Ubuntu. I have a new Dell Mini10 running that I have configured and running. I want to clone or backup the system at it's current state. I have been looking at the options and Clonezilla seems to be recommended often. Are there other choices that are easer or better? My real goal is to make a bootable DVD that will restore my system back to the point it was cloned.
basically want i want to do is copy my whole file system to a different hard drive, then reconfigure my partitions and copy it back. then reconfigure grub.
the reason i want to do this is when on dual boot i gave it only 70gb of space and now i want to add 300 more. and since the 300gb of space is a primary partition and this is a secondary i cant extend them or combine them.
so what i want to do is. sudo cp -rP / /home/me/sshfs-folder
I just moved to Ubuntu. I have been configuring and installing applications so I can finally call this OS my new home. Still not there yet but have been doing alot of work on it. I was originally with Windows XP. I am a back up freak. I backed up my documents, firefox bookmarks and other important information every 5 mins to another drive when I was using Windows XP. Also, every 24 hours I would have this program Acronis True Image back up the whole Windows partitiong (Drive C). This was so if my hard disk died, I know I could restore the partition from an image and only lose the last 24 hours of configurations/modifications made to the OS.
And for personal data such as bookmarks, messenger chat logs, documents, pictures etc, I would only lose the last 5 minutes of this data, since it was always backed up every 5mins. It was very fast too.
So my question is: 1. Whats the best application to save a whole image of the Ubuntu partition so that it can be restored with minimal (hopefully only 24 hours) of data loss?
2. Whats the best application to save selected directories and have it configured such that those directories are backed up periodically?
3. Whats the best application to do Number 2 (above question) with versioning? That is, if it is backing up periodically, it will save file changes, so we can revert back to an older version of a file.
I have tried SimpleBackUp suggested by the Ubuntu site and did not like it at all. It just said it would run in the background and you couldnt even cancel it or monitor it!
Issue: I want to backup my system and be able to restore if/when my system crashes.
Setup: Thinkpad T61 running Sidux KDE3.
I want to back up the system files more than personal data. What I have found is that when I apt-get dist-upgrade the upgrade performs without error, but when I restart and login I get a black screen with a mouse. From the 'black screen' I can open yakuake with F12 and then launch applications and such from the command line. The point of this more troubleshooting right now. Later is so I won't need to do a complete reinstall.
What backup prog have you used that will backup the complete system and is easy to restore?
O/S: Fedora 12 I am newbie in linux. What I want to do is: Make backup for my file system, cos I learn how to configure servers. So if I made some thing wrong, I want to be able to restore the default setting for my files. Instated of install new O/S.
I have used gparted for backup of my system, but now I have RAID configured and gparted didn't recognize my drives: Disk /dev/md0 doesn't contain a valid partition table
I have 2x500Gb HDDs configured in RAID and primary and logical partitions set by LVM (on Debian lenny 5.03)
Code: fdisk -l Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x000cb4b9
[Code]...
What program can I use to make a backup of my installation into /dev/dm-1 (this drive is mounted as /home)?
on my server I have atMail and a intranet site being hosted using mySQL for the database locally, and obviously backing it up would be a good thing. I got the backup package from the list if you use the add/remove software called dump-0.4.etc.. can't seem to find much on how to use it, set it up, nothing. Granted I could be looking for the wrong thing which I'm sure is the case. As of now it's looking like a USB drive is going to be my only option, that will change in the future as this "project" goes further (we are a windows shop trying out Linux, and the next step is going to be adding another server that's a file server at that point we'll probably go to NAS for the backup and then transer that to a USB for offsite/secondary backup).
I have re-installed our operating system (CentOS 5) ,what is the best way to restore our Samba server? Can it be as simple as copying the smb.config and smbpasswd files back into the /etc/samba directory? That's what I am hoping. If I just copy the smb.config and the smbpasswd files back to the samba directory will the machine trusts, users and passwords just work? If not, what is the proper procedure for restoring. Actually i want to make CentOS 5.3 as my Domain Controller, I want to test all Scenario in case of any disaster of DC before putting it into production environment. I have some queries as:
1. Is CentOS 5 is more stable than RHEL 5 etc.
2. How can i take back up of entire samba server if need it in case of any disaster. How can i restore it.
3. How can i use logon scripts like GPO in windows servers.
4. How can add users in samba server and linux at one time with one command.
5. tell me any Web based samba administration tool other than SWAT.
