New to GNU/Linux community. Have Dell Latitude C800 I picked up for $5.00 @ garage sale. Windows XP currently installed works fine, but looking for optimal Linux OS for this unit. Tried installing SUSE 11.2, Gentoo, Freespire, Debian, Vector, Knoppix & Ubuntu w/o satisfactory results. Any suggestions from you good folks w/experience? I understand Slackware might do the trick, but remember I'm a newbie. :-)
View 5 RepliesI have a Dell Inspiron 1545 (Ubuntu 10.04 64-bit) that I use as my main comp, and a Dell Latitude C800 (currently Slackware 12.1) that just sits on my desk all day.I want to do two things (the second one isn't as big of a deal, but I really want to do the first):
1)I want to plug in my external hard drives into the Latitude and be able to link the Inspiron to the Latitude via ethernet cable and access/modify the files on the Latitude and external HDs using the Inspiron. Also I would like to have apache running on the Latitude so that when I'm connected, I can get to a custom site I've made for displaying the contents of said HDs.
2)I would like to be able to extend my desktop from the Inspiron onto the Latitude while still doing the above if possible. I figure with X it must be possible, but I don't know how to go about doing it and I only want to do that if I can get the first part working.
we have a laptop (dell latitude xt) on our company, and we would like to install ubuntu on it. windows 7 works fine out of the box, so the hardware is fine.since this laptop has a touchscreen we just installed ubuntu 10.10 netbook edition 32x.But, we do not manage to enable the touchscreen, neither the vga graphic drivers.
View 1 Replies View RelatedA friend lent me their Ubuntu book but I can't understand it and could not find anything about the sound suddenly going from the speaker on Monday night. I went to Sony Ericsson's site to check something on my account and loud music suddenly started blaring out so I pressed the Fn button and End which muted it. However, I forgot to take it off before closing down for the night and as of Tuesday morning I have no sound. Would me leaving mute on all night have screwed something up or has it just suddenly gone? I am so upset as I cannot afford to get another laptop as not working and this is my last resort since my original Compaq one died.
I appreciate any "Helpful" solutions. Not in techy but layman's terms please as I won't understand. Also if you do reply, I am in the UK and also don't get notifications so I am not being rude if I can't get back to you quickly. I will be going to bed now.
I have a Dell Latitude C840 with a nVidia GeForce4 440 Go card and the screen is reported to go to 1600x1200, 32 bpp on Wikipedia. But I am unable to choose that resolution in Slackware. last time i changed the resolution to a higher one i needed to edit the xorg.conf, and change the HorizSync setting to match the monitor. but im unable to find the specifications on the screen for the C840. is there another way of doing this ? mabye a nVidia driver or something ?
Code:
# Monitor section
# Any number of monitor sections may be present
Section "Monitor"
Identifier "My Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5 - 50.0
# HorizSync30-64 # multisync
# HorizSync31.5, 35.2 # multiple fixed sync frequencies
# HorizSync15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 40-90
EndSection
i have dell latitude(E5510)and the webcam dont works, i have installed open SuSE 11.3. .
how to use or is there any drivers to be installed?
When I boot from the CD, it starts to boot and then continously repeats:
Code
Initializing gfx code...
boot:
gfxboot:
It stops on boot for about 10 seconds each time then gfxboot for not even a second before the cycle continues. I have tried more than one CD, so I don't think that is the issue. It even did the exact same thing when I tried it on PCLOS 2010.10. Both versions I tried were KDE. trying to figure out how to get past this.
Ive been trying to install Fedora 12 on a Dell Latitude C600, (Pentium III 750/600 MHz; 256 MB RAM; 250 KB Level 2 Cache; 8 MB Video Memory; ATI M3 Video Controller) Downloaded iso files from Fedora Project, Verified integrity with sha256sum.exe, burned to 5 CD's. Disc's 1 & 3 failed Linux test at installation. Burned Disk 1 twice more and still fails. Went ahead with installation. Chose to Use all of the 20 B hard disk. Would not install via graphical. Finished after Disk 1. After re-starting computer and logging into root, only get CLI operability and can't seem to get a GUI. I'm new to linux - just thought I'd put this laptop to use to familiarize myself with it.
View 3 Replies View RelatedI'd really like to start using Linux, but I don't know much about it. I tried installing Mandriva One 2010, but it apparently isn't compatible with my laptop. Does anybody know what would be a good distribution to use with an old Dell Latitude CPx? I'd like to get a free bootable CD one for starters, if possible. I mainly would like to use it for surfing the Web.
View 9 Replies View RelatedAfter someone messed up the computer by putting XP half ass on it, it was built for windows 98 se. Now that i am working with an unformated hard drive. It doesn't like Ubuntu, Kubuntu, Windows NT, so I need to start somewhere and I need the answer fast, so i need to know what is the best linux distro for it. it is a Dell Latitide CPT c.
View 8 Replies View RelatedI just received my brand new E6410 laptop, which have i5 processor and wish to install ubuntu 10.04 on it.
I am wondering which should I choose: 32-bit or 64-bit?
I resued a Dell Latitude CPi D300XT that was getting tossed and have XP on it running a little slow but decent for basic web surfing. I saw a ..... video of someone that had Ubuntu Minimal with LXDE running on it. I could not find that but tryed Puppy Linux, Damn Small Linux, and Ubuntu 9 to 11.04 CD's in it and could not get them to to boot into the CD. I even just set the Dell to only boot from CD/DVD and would not boot any of them.
Does anyone know which Ubuntu or Linux distro I could try on a Dell Latitude CPi D300XT? The specs are Intel Pentium II 300 MHz, 256MB of RAM and 20 Gig Hard Drive.
refer to this and let me know if I can get this working
[URL}
this is my first post sorry if im not clear OK i downloaded Ubuntu 9.1 32bit burned it to a CD and popped it in my dell latitude c600 i was going to set it up to dual boot with xp i already have 2 partions so every thing was ready
i hit install and saw a Ubuntu symbol fading in and out after that i got a whole heap of i/o errors ranging from 350 to 500 for the first number, then a bit later it loaded up the busy cursor for Ubuntu on a black screen it then changed to a cross outline and no matter how long i let i go for i do not change at all off that the disc isn't the problem because it works on my desk top live and install
I have recently installed Ubuntu 9.10 in my Dell Latitude E6400. Everything works great except that I cannot disable the built in microphone. I have even disabled from the BIOS but the mic continues working, this is really annoying as I do lots of calling from this computer for my work.
I have played around with the alsamixer and the sound preferences but I haven't been able to disable it or at least lower its volume.
My headset is plugged in to the mic jack and it works fine. The problem is that both the headset and the internal mic are working at the same time.
The disc is fine I have installed using the CD on an Acer Laptop without any trouble what so ever. However now I need to install it on a Dell Latitude D505.It was detected and started the disc and show Ubuntu with the five dots loading screen. And then it goes black, with the laptop on. The menu with options like Install, defect test etc. can't be seen.In response to this I installed it inside Windows and that seemed to be ok, so I restarted the laptop and selected Ubuntu from the boot menu and does the dot loading screen and then black.I have searched Google and it is just threads that end up dead.
View 9 Replies View RelatedI've installed Ubuntu 10.10 Netbook to my sisters laptop (Dell Latitude C640) but there appears to be a problem with the screen going black then opening the primary window, then loading the sidebar and then going black again.
For example, I'll hover over the new bar on the left and it'll just disappear, the screen will go black then will suddenly come to life again and then disappear, go black and so on. It just cycles through that.
I just installed 11.04 on my Dell Latitude D620, and I'm not able to get an Ethernet connection. (Which in turn means I can't get wireless drivers.) Whenever I plug in an ethernet cable to the port and select auto eth0, the networking icon on Ubuntu's status bar flickers between the obtaining wifi animation and a spinning cursor. In a couple minutes I get the "wired network - disconnected" message.
View 1 Replies View RelatedAm pposting in here cause its my understanding gos is a part of the ubuntu family sorry if i am wrong. Anyway i have a dell latitiude d610 which am wanting to run Gos on currently i dual booting but keep finding myself going back to windows as I cant get my wireless working in gos any ideas please anyone
View 4 Replies View RelatedI've installed Debian on a Dell Latitude C600 and I've managed to get all of the hardware functioning except the WiFi adapter. The laptop is using a Netgear WG511v2 PCMCIA interface. I've extracted the WG511v2.INF and WG511v2XP.SYS files and I believe they are successfully installed using NDISWRAPPER.
The WiFi adapter's green LED flickers and the yellow LED periodically flashes, which would seem to indicate that the adapter is attempting to connect to a network.
I believe the problem that I'm having is related to configuring the wlan0 interface with the proper security credentials to attach to the WiFi network. I'm using WPA2 with AES for encrypting. The key is 64 hexadecimal characters.
how to configure the wlan0 interface with the proper security credentials. The Network Manager applet only offers WPA2 Personal as a configuration option.
Just did a fresh install of F12 on the D600, and a couple of problems. The network was working during the install, but after does not see ethernet nor wireless.
The only straying I did from a default install was to manually create partitions, making one for swap and the rest is / on ext4. Seemed fine installing and booting.
Also the touchpad and mouse settings are messed up, buttons reversed, click events from the touchpad showing "clickdown" but not acting as if the click was released.
ONE BIG COMPLAINT: I see selinux doesn't come with an easy way to disable. How is it disabled with F12?
For now I'm in a hurry, so I'm going back to F11 - past OS installing and booting ok include Ubuntu 8.04, 9.10, F5, F7, F9, F10 and XP to name a few.
I have recently installed Ubuntu 9.10 but am unable to connect to any of the wireless networks. Network manager does not shows any of the available wireless networks and upon clicking the network connection icon, under Wireless networks category it shows "Device not ready".Following are the results of some of the commands :
iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wmaster0 no wireless extensions.
[code]....
I'm trying to install the magnificent ubuntu 10.10 on my brand new Dell LATITUDE E5510. The installation works fine. I installed it with a working internet connexion ... so the drivers should be there. Then when booting, the GUI does not start I get the console instead...
I tried several things:
- run startx --> I get a blank screen where even CTRL+ALT+F1 does not work anymore
Code:
sudo dpkg-reconfigure -phigh xserver-xorg
--> just returns without anything on the screen, no error no nothing
- run in failsafeX mode, I get:
Ubuntu is running in low graphics mode. Your screen, graphics card, and input device settings could not be detected correctly. You will need to configure them yourself.
Then I get the login page but it doesn't go any further, when I type my login/password it comes back to the login page...
When I do:
Code:
lspci | grep VGA
I get :
VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev02)
That's all I could see... apart from that I'm not getting any error messages and I'm really stuck.. I'm running on intel Celeron 32 bit, I have checked the checksum of my CD...
I've recently partitioned off a section of my hard drive to run Ubuntu from and I'm having trouble with the network connections. In my device manager of Windows 7, it lists that my network adapters are
1. DW1520 Wireless-N WLAN Half-Mini Card
2. Intel(R) 82577LM Gigabit Network Connection
Is there something I'm not doing right in order to allow me to connect to a wireless connection? Are these devices even enabled in Linux systems?
I just did a fresh wipe and install of Ubuntu 11.04 on my Dell D630 Latitude. I installed connected to the internet and ubuntu recognized I was missing firmware and I installed and rebooted. Now the "firmware missing" notice is gone but I don't know how to connect to my wifi. I can access internet with the ethernet cable.
This is the lspci:
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 0c)
[Code]....
I feel like I just need to add the wifi network, but I don't know what info to put into the fields.
what model of Dell Latitude D-series laptop will work with Ubuntu10.04? I'd like to buy one from eBay, and I want to make sure it's compatible first.
View 3 Replies View RelatedI have installed several flavors of Linux on this box Ubuntu, Mint and a few others so I figured I would try the most challenging disto Slackware 13.37... I had not trouble getting through the install but when the system boots it just shuts down at some point during the boot process.
View 3 Replies View RelatedI have a new Dell Latitude e5510 with Intel integrated graphics processor in I3, the model should be something like HD mobile Intel GMA integrated graphics (not able to find more precise details even under Windows using everest).
Trying to install Ubuntu 10.04 from livecd this returns me a black screen after I choose to try ubuntu. I already tried to use options as well nolapci nomodeset but without results. The screen lights up the backlight is on and I go into kernel panic because starting to cycle on and off repeatedly icons keypad lock and block number.
I am running the latest version of arch linux on a Dell Latitude D420. So far everything has worked perfectly except the wireless. It seems that Arch does not even detect the wireless because ifconfig -a only gives me the loopback and eth0. I installed ndiswrapper as well as the drivers. lsmod | grep ndiswrapper shows that ndiswrapper is being loaded on boot. I tried to install the iwp3945 drivers, but they have become obsolete so pacman was unable to find them. I also tried installing the iwl3945 drivers as explained here [URL] but still no luck.
View 14 Replies View RelatedPartitioned Hard Disk I set up Ubuntu 9.10 (10.4 would hang before installation).Computer works for a few minutes and then freezes (pointer and the rest: Ctrl Back, Ctrl Del, Ctrl f2 do not respond).The graphics card is Intel� HD GraphicsRAM 8GbHD 500GbLED Display (1920 x 1080) (perhaps too much?)It seems a memory problem:testing memory on windows is ok. On Linux the memory test declare "too small lower memory". No problems with windows (I tried also wubi, independently, but it hangs immediately going blank after upgrading packages). Ubuntu 9.10 works perfectly on my older pc
View 3 Replies View Related