Ubuntu Installation :: "No Space On Device" Error When Running Update-initramfs
May 28, 2010
I'm trying to compile and install new kernel 2.6.32.14 in my ubuntu karmic. After compiling source and executing the deb package for the kernel, I tried to run update-initramfs but got "No space on device" error. My /boot partition size is 100 MB and is currently having 37MB free. After I run the update-initramfs command I noticed that space in /boot got depleted and soon came to naught which led to no space error thrown by gzip. I believe the resultant gzipped archive is no more than 20MB...then why is the whole 37MB is being used up? Please correct me If I'm wrong here otherwise I might be left with no choice but to increase the size of /boot partition. Is there anyway I can make update-initramfs to use the temporary space from other drives(may be /tmp) when creating gzipped archive?
View 1 Replies
ADVERTISEMENT
Jan 4, 2011
df -h [URL] I did the following command to find everything is in /usr or /var, then tracked it down to /usr/lib and /usr/share as the main offenders, but out of all the directories none are more than 1mb or so.
du -sh /* | sort -gr | head -n 5
I tried to uninstall firefox, which is what got me in this mess in the first place, the log claims it will remove ~240 mb but failes on a "E: Write error - write (28 No space left on device)" [URL] If I could juggle something onto an external hard drive so I can uninstall firefox I would be out of the wood. Failing that I believe a new install is in order.
View 1 Replies
View Related
Jun 4, 2011
When I tried to update my ubuntu it gave me the following error:
"The upgrade page needs a total of 19.9M free space on /boot. Please free atleast an additional 3624k of disk space on /boot. Empty your trash and remove temporary packages of former installations using sudo apt-get clean."
Why the packages require free space on /boot. How to empty trash. How to remove temporary packages of former installations using sudo apt-get clean.
Screenshot attached for reference.
View 9 Replies
View Related
Sep 1, 2011
I am a beginner to Ubuntu & Linux. Some months back I installed ubuntu on a somewhat aged & slowed down acer laptop running win XP. Finally I tried running ubuntu a couple days ago & it's been pretty smooth, until this from update manager: Not enough free disk space
The upgrade needs a total of 615M free space on disk '/'. Please free at least an additional 296M of disk space on '/'. Empty your trash and remove temporary packages of former installations using 'sudo apt-get clean'. I guess I don't have to install these "important security updates", but it's probably best I do & learn how to use the file browser, terminal (Applications - Accessories - really, it's a little hidden), other important parts of ubuntu.
For downloading I have an external drive connected with 760 GB free - more than enough space for anything. I can also move files to this disk - do I maybe need to reboot into win xp to move files? I have no idea how to know which ubuntu files to remove for space - proc folder seems to have enough room, but should I just move it to the external drive? I can't seem to access the rest of the hard Drive where I could simply move a 4GB movie.
View 9 Replies
View Related
Mar 13, 2011
after initating the update and i enter my pass word, update stops and an error box comes up stating that it is unable to update because there is more than one synaptic manager running, i have restarted and get the same results, and to my knowledge there is nothing else running in the background.
View 3 Replies
View Related
Jan 20, 2011
cp: writing `/tmp/tmpX2KZDc/system.image': No space left on device However, when I right-click on properties, I see it has 51 items, totalling only 130.5 KB!this is a dual boot system with Win XP and Ubuntu 10.10 (~58Gb partition)Quote:
anil@anil-HP-EliteBook-8440p:/tmp$ mount
/dev/sda5 on / type ext4 (rw,errors=remount-ro,commit=0)
proc on /proc type proc (rw,noexec,nosuid,nodev)
[code]...
View 12 Replies
View Related
Nov 1, 2010
I just removed a proprietary (fglrx ) driver which didnt work out well.Now all my updates hanging on: Setting up initramfs-tools (0.98.1ubuntu6) ...update-initramfs: deferring update (trigger activated)Setting up linux-image-2.6.36-020636-generic (2.6.36-020636.201010210905) ...Running depmod.update-initramfs: Generating /boot/initrd.img-2.6.36-020636-genericAnd I dont know how to solve it...besides a clean install.
View 9 Replies
View Related
Oct 31, 2009
I keep getting this error when I try to run the auto update. b43 conflicts with broadcom-wl
View 2 Replies
View Related
Jan 22, 2011
Put together a PC using the following:
Foxconn M61PMP-K AM3 NVIDIA MCP61P Micro ATX AMD Motherboard
AMD Athlon II X2 240 Regor 2.8GHz Socket AM3 65W Dual-Core Processor ADX240OCGQBOX
Patriot 2GB 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10600) Desktop Memory Model PSD32G13332
HITACHI Deskstar 7K1000.C HDS721010CLA332 (0F10383) 1TB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive
Plus an old case and PSU and an old 18gb IDE drive, and an old CD-RW drive
I put the CD in and boot the machine. The initial Ubuntu screen comes up ("Ubuntu" with the line of dots below it) for a few seconds, and then it disappears and I see this text:
(initramfs) mount: mounting /dev/loop0 on //filesystem.squashfs failed: Input/output error
Can not mount /dev/loop0 (/cdrom/casper/filesystem.squashfs) on //filesystem.squashfs
At that point it hangs and will proceed no further. I've tried this with the latest Mythbuntu Live CD and the latest Ubuntu Desktop Edition Live CD. Both were x64 versions.
View 1 Replies
View Related
Apr 21, 2010
i'm using Ubuntu virtual machine.latly, i've moved the VM image to other PC. something with the user privileges got wrong. i when i edit a file using nano for example from a simple user, it says: "no space left on device" but when i use
# sudo nano filename
it works.i used
#chmod 777 filename
and it still dosent work. i cant save/write to disk while i'm in the user account. but with sudo, or root account it works.
View 1 Replies
View Related
Feb 13, 2010
I have downloaded the latest Ubuntu 9.10 and used 'U904p' a program I had for creating 9.04 live USB I had before. I had 9.04 on the USB pen but thought that 9.10 would be better to install right away rather than upgrading it. So I run through the CLI and make it bootable and all that. I come to put in my pretty old (Spare parts mashed together) Linux box. I get this about 1 minute after the Ubuntu logo and loading bar:
Top of page: WARNING: Couldn't open directory /lib/modules/2.6.31-14-generic: No such file or directory
Then lots of 'FATAL: Could not load /lib/modules/2.6.31-14generic/modules.dep No Such file or directory'
Then I am dumped in to Busybox in initramfs command line. I have been googling and look around the forums all last night and this morning. I find loads of stuff from 9.04 but not 9.10? I tried the old 'Pull USB pen when Ubuntu log shows' and 'Changed SATA settings' turned them off in end, using IDE. Could it be that I created it using the old U904p program. I will look in to the newer one. Seen it about on forums. Otherwise any ideas? I am wanting to build a FOG box for imaging all my PC's and trailing it for work.
View 2 Replies
View Related
Feb 11, 2010
E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. Yes I tried 'sudo dpkg --configure -a' Should I do a reinstall.
"Setting up initramfs-tools (0.92bubuntu53) ...
update-initramfs: deferring update (trigger activated)
Processing triggers for initramfs-tools ...
update-initramfs: Generating /boot/initrd.img-2.6.31-17-generic
gzip: stdout: No space left on device update-initramfs: failed for /boot/initrd.img-2.6.31-17-generic dpkg: subprocess installed post-installation script returned error exit status 1"
View 3 Replies
View Related
Nov 2, 2010
So i insert the ubuntu 10.10 in the dvd and boot it. The menu comes up and i choose to install ubuntu. After that it shows some black screens and this error:
(initramfs)mount:mounting/dev/loop0 on//filesystem.squashfs failed: Input/output error cannot mount /dev/loop0(/cdrom/casper/filesystem.squashfs)on//filesystem.squashfs
The disc aint scratched. I tried installing from Windows but i got another error.
And for some odd reason Ic ant make a removable startup disk:
View 2 Replies
View Related
Jan 13, 2010
I am trying to install Ubuntu on a nvidia board which, based on the forums I have perused, is a FAKERaid chipset. Originally I tried to install according to https://help.ubuntu.com/community/FakeRaidHowto to no avail. I gave up and am resorting to breaking down my raid setup (thus losing my Windows XP installation) and using Linux's software raid (which seems to be the recommended method) with the Alternate CD install.
I went in to the bios and completely disabled my board's RAID function. I then followed the instructions here: https://help.ubuntu.com/community/In...n/SoftwareRAID , except it popped up with a window advising me "one or more serial ATA RAID configurations have been found. Do you wish to activate these RAID devices?" which that page didn't mention. I believe I selected "Yes". Setting up the partitions I made (from beginning of disk to end of disk) a RAID1 200MB /boot partition, a RAID0 / partition (90GB?), free space not set up in RAID (approx 20GB for each SATA drive to later install Windows on [if that's even possible]) & then the SWAP partition 2GB at the end of one of the disks (is it OK that this one wasn't in RAID?).
The installation completed, as far as I can tell, without a hitch. Except also of note: my network card doesn't work in the installer (gives an error message about unable to configure dhcp) so i'm not connected to the internet. Then I restart and the following appears: grub loading: error: biosdisk read error. Followed by what appears to be the Ubuntu loading splash (just a small white shape in the middle of the screen), and then:
[Code]....
View 9 Replies
View Related
Jan 4, 2011
ibv4l2: error turning on stream: No space left on device
Webcam work in:
fps: 1/30
formate:JPEG/WMV
it works not perfect on guvcview
View 4 Replies
View Related
Jul 26, 2011
On two Centos5 servers, yum gives a segmentation fault error when trying 'yum update' or 'yum check-update' after running 'yum clean' :
[Code]....
The error is the same for the other computer except while attempting to update the rpmforge repository. Nothing has really changed on the servers in some time and 'yum update' worked fine on each yesterday and I have no idea why they would both suddenly fail!
View 3 Replies
View Related
Aug 20, 2010
I am currently running slackware 12.2 on a 25 GB partition. I like to use slackbuilds, but when I try to compile larger tarballs (like abiword, or a patched version of Ghostscript as I did today) I receive an error-message: 'Not enough space left on device'. I think the size of the partition must be big enough (I never got this message when compiling with Linux From Scratch). I think it has something to do with the size of my /tmp directory, but I don't know how to fix this. Is there a way to solve the problem, so that I could be able to use slackbuild-scripts?
View 4 Replies
View Related
Jun 21, 2010
ubuntu 9.10 is not booting shows Gave up waiting for root device.", (initramfs). how to boot normally from this problem. The problem is coming from installed system.
View 2 Replies
View Related
Jan 15, 2011
I have searched google for a couple of days, and I keep hearing about an INode limit on filesystems, but that doesn't seem to be the case.
Now whenever I try to download something, watch a ..... video, or listen to Pandora radio, it just stops playing after 2 seconds. Downloading says "No space left on device".I also get the error as root.I do have 5% and more free of HDD space. After reading the similar posts I checked all of this, so if I am overlooking something on the forum, I apologize for an extra post about.
View 3 Replies
View Related
Apr 13, 2011
Recently I installed a Linux distro (Pardus) which boots using initramfs. I am completely novice here. In the former configuration I used lilo to boot OpenBSD, Debian and W2k (it is easy for me to configure lilo to boot OpenBSD). But initramfs is a something completely new for me. As I understand it is a virtual file system with a standard directory tree and the information stored on that system is used (to boot the kernel?) to mount the true (physical) root device. The first question is how to properly describe a system (kernel image) booted with initramfs in the lilo.conf.
View 7 Replies
View Related
Sep 1, 2010
I just built a VMWare VM from the Fedora 13 DVD - 64 bit. It now wants to do 385 updates so I let it download all of the rpms. As it starts to do the install I get a Transaction Error to the effect
Quote:
Test Transaction Errors: installing package kernel-2.6.34.6-47.fc13.x86_64 needs 8MB on the /boot filesystem
System monitor shows that I have 19.7 MiB available on /boot - so what is going on?
View 8 Replies
View Related
Jun 4, 2011
when i tried to update my ubuntu it gave me the following error: "The upgrade page needs a total of 19.9M free space on /boot. please free atleast an additional 3624k of disk space on /boot. Empty your trash and remove temporary packages of former installations using sudo apt-get clean"
please help me to fix this error. why the packages require free space on /boot. how to empty trash how to remove temporary packages of former installations using sudo apt-get clean"
View 2 Replies
View Related
Oct 26, 2010
After copying a filesystem to be used as an image on a PXE server, is it possible to update that image's initramfs on the PXE server?
On PXE server, I added several ethernet modules/drivers to the following file:
/nfsroot/etc/initramfs-tools/modules
Before the changes will take effect, I need to run:
Code:
$ sudo update-initramfs -u
View 1 Replies
View Related
Jan 24, 2011
I'm finding myself in a situation where I am locked out of my machine (because of a initramfs that doesn't allow me to log in). I think I know where the problem is, but I do not know how to go about rebuilding an initrd file from another machine (especially since my second machine is running on a lower kernel version).
I have tried booting from a LiveCD, but that does not allow me to make any changes to /etc/update-initramfs/. Currently do not have a USB drive handy. How would one go about this?
View 2 Replies
View Related
Jun 21, 2010
I'm working on a custom Ubuntu 10.04 live cd, and I've found updating the Plymouth splash uses up a lot more disk space. The culprit seems to be the command update-initramfs -u, which is needed to apply the new splash image. I'm guessing it's making a new intrd image or something.
View 3 Replies
View Related
Dec 2, 2010
I need to run an executable from initramfs which after executing should restart the system. How is it possible?.I tried using exec within the init of initramfs but it shows kernel panic (I guess exec after executing the binary it tries to exit and exiting with pid 1 is giving the panic).
View 2 Replies
View Related
Jan 19, 2011
I was running a python script tool and got this error. Exception: Command cp -Rfp /home/anil/mydroid/myfs/* /tmp/tmpX2KZDc failed (I am on dual boot ubuntu 10.10 with Win XP.) Here is a partial output from the console. Note the "No space left on device" error, when writing to /tmp.
Quote:
mke2fs 1.41.12 (17-May-2010)
Filesystem label=android_fs
OS type: Linux
[code]....
View 1 Replies
View Related
Jun 10, 2011
Running CentOS 5 x64 And today my httpd is running very slow and I can't find a fix. Looked all over different forums
When starting httpd I get the message: /var/lock/subsys/httpd': No space left on device I checked that directory above and there is no file called httpd tried rebooting server
Can't do updates too:
[root@u15438957 ~]# yum update
Loaded plugins: fastestmirror, priorities
rpmdb: unable to join the environment
[Code]...
View 4 Replies
View Related
Apr 6, 2010
I'm booting my server from a USB stick. It's working fine, but the root of my file system when booted only has about 100MB left. The USB stick itself has a little over 1GB free. How can I make / take up more space on the stick?
View 1 Replies
View Related
Apr 5, 2011
just installed hardy after I removed Maverick since it doesn't support my ati graphics. I installed it inside my windows xp pro and run smoothly after installation, added couple of widgets and so on... after I restarted it the next time, a balloon showed on top saying 113 or so updates are available, so I updated it.
After update I reboot my lappy and it won't get to my ubuntu anymore but works fine with my xp. I tried several searches on the net to find the solution but can't really figure it out. I just tried running Boot info script as it might help experts figure out what's wrong with my box and here's what it shows:
[Code]....
View 7 Replies
View Related
