Ubuntu Installation :: 10.10 Desktop - Windows Drive Will Not Mount
Mar 20, 2011
New 10.10 desktop installation on an Acer Aspire 5515 32 bit Vista Home Basic/ 3 GB RAM. There was no option during the Ubuntu installation to select the Windows partition/drive for access via the Ubuntu installation, and the drive does not now appear in "Places." The reason I used 10.10 was because the 10.04 installation on the same machine also would not allow mounting of the Windows drive. However, there was an option to select the Windows drive during the 10.04 install. Couple of things I noticed that were "different."
1) During the 10.04 installation (over which the 10.10 install now resides) there was an option to select either or both of the two user accounts - both administrative - in the Vista installation. I hadn't noticed that before on previous installations. I choose both accounts for later importing, but, again, there was no option to mount the drive upon the finished Ubuntu installation.
2) There could be an issue with what I did with the partition/naming on the Vista installation. Upon restoring to factory settings, I deleted the (10 GB!) restore partition and resized Vista to occupy the newly opened space. But the GRUB entry for Vista says "Windows Recovery Environment" instead of "Windows" or whatever it usually does.
Everything else about this dual-boot installation system is just fine: everything boots and updates and so forth. But I really need that Windows drive to mount so that my friend's kids can import iTunes and other files from Windows to Ubuntu. I also want to be able to run Avast scans on Windows from Ubuntu. I did rummage around a bit by way of locating a solution for this problem, but I can't find anything which "works" or is on point.
I have been trying to share folders from my main PC which is running Ubuntu 10.04. I have been able to figure out Samba enough to get my a couple of folders shared, but I have been unable to share any folders which are on my external harddrive. After entering the path in my smb.conf file they appear on the network but I am unable to navigate to them. When trying to navigate to them through the network folder on the pc they are actually connected to I get an "Unable to mount location: Failed to mount windows share" dialog box. On the windows pc I am trying to share with I get, "Windows cannot acces \Josh-Desktop ame of folder"
My smb.conf file looks like this:
That folders I cannot access are Music and Videos.
I have an Ubuntu 8.04 machine, I have a NFS drive being mounted when the system starts up. The entry in /etc/fstab looks like:Code:server:/srv/Pictures /mnt/share nfs rw,hard,intr 0 0The drive is mounting fine, but I would really like it if the icon did not show up on the desktop for this drive.Is there anyway to keep it from showing?
I installed Ubuntu 10.04 and I love it. the only problem I'm having is that I can't seem to mount my windows drive in order to see my files(music, pics, vids). How can I do this? I have 4 500gb disks and i can only see two of them and neither one is my windows drive. Windows 7/ubuntu 10.04 installed using wubi.
Windows XP Laptop hard drive is stuck in a hibernated mode. Will not let me access it through Windows, period.
I loaded Ubuntu Live on the suggestion of a coworker in order to retrieve my important files by hooking up the Windows HD through a USB adapter (Inland).
Ubuntu recognizes the 160GB HD, but refuses to mount the drive because "Windows is Hibernated." I Know my disk is hibernated, I need a way to get my important files from the drive...
(Screen Shot Attached in .jpeg format)
I know very little abount Ubuntu so please keep that in mind with your gracious replies.
I've just installed ubuntu 10.10 (64bit) on my 1TB drive where as I have my windows drives on a seperate 2x 1TB drives in RAID and am not exactly sure how to mount it.
I am not finding it under computer or under NTFS configuration tool and when I click mount under storage device manager it does nothing, although does detect the RAID array as /dev/sda2
I have a friend of mines computer that is hosed and gets the BSOD. He has pictures of his grandson on there that her really needs before I fix it. Is there a way to mount the main windows partition while running the Live CD? I have tried it and get an error but I am not able to get it working.
I upgraded to Lynx.When I plug in a USB drive, the drive icon no longer appears on my desktop.If I go to Places/Computer it shows up.And once I open it, the icon appears on the desktop.
I have a RH5 box and develop on Windows. I'm looking to mount the root dir of the RH machine just for ease of integration and automatic deployment to the linux box. I'm using WinSCP at the moment but that (from what I can find) only opens a window, which isnt accessible from eclipse.
I have 2 USB drives connected to an XP machine that I rotate twice a month for backups. On my CentOS box, I have that drive mounted at /home/backup using cifs.
Because the drive is mounted on the Linux box, Windows XP complains when I try to "Safely Remove Hardware". As a result, I have to "umount /home/backup", then "Safely Remove Hardware". After connecting the new drive, I then have to "mount /home/backup" in order to use it again on the Linux box.
Now, this question may be a Windows XP question, but I was wondering if there is anything I can do on the Linux box first. Is there anything that can be done on either end, so that I won't have to "umount /home/backup" first?
I have a friend of mines computer that is hosed and gets the BSOD. He has pictures of his grandson on there that her really needs before I fix it. Is there a way to mount the main windows partition while running the Live CD? I have tried it and get an error but I am not able to get it working. Does anyone else know any other tricks I can do to help get my friends pictures of his grandson off there?
I'm running OpenSuse 11.2. I've got it running mostly the way I want and it connects to my wireless internet no problem. I have a external hard-drive on my Windows machine setup as a share folder. I can mount the drive with:
Code:
mount //10.13.23.2/D /home/james/mnt/win However when I do mount like this it doesn't give my any read/write privliages on the drive. Also on a slightly different issue but still mounting related I have my HDD partitioned into four main drives (not including swap etc). They are my Windows drive, a seperate storage partition formatted for Windows, my main linux drive and a seperate parition for linux storage.
I want to have my Windows drive, my Windows storage drive and my linux storage drive all mounted on boot. I tried adding these to fstab, and they mount fine but again I have no read/write permissions. My fstab looks like this:
Lastly I would like my Windows Share drive to mount on boot but I have been advised that I would need to write a shell script for this, to do network checks as obviously I won't always be connecting to my network.
I have recently set up an ubuntu installation on an old PC. After some fiddling with both it, and the windows 7 machine, I have managed to share all of my drives. However, when attempting to access them from ubuntu, only 2 of the 4 hard disk shares will mount, with the other 2 failing with a Unable to mount location, failed to mount windows share error message.
So I install Ubuntu 10.10 on a multi-drive, dual boot with windows 7 computer. At almost the end of the install, I see "running grub-install sda" or whatever it is. sda is my windows drive.So rather than asking where to install the bootloader or give you the option like it used to, it just did it to my "first" drive.
What the hell? Now my Windows MBR is gone. I like to maintain that so if my linux drive dies I can still boot into windows via the old windows boot loader.Possible to move Grub2 to my other drive and repair windows 7 drive MBR?
I downloaded centos from their official bittorrent.It contained two iso files and md5sum.txt,sha1sum.txt and sha256sum.txt and also md5sum.txt.asc,sha1sum.txt.asc and sha256sum.txt.asc.Now when I mount iso file to virtual drive there is no autoplay option.Can you tell me how to install it.I dont see any setup file?
I have a problem when i installed ubuntu via usb drive and cd.. and i try it in windows xp and windows 7. it's a same problem .. but this is the error message " permission denied "
I have Ubuntu 10.04 and Windows XP running each one in a partition of two different hard drives. I want to install Windows 7 in a second partition of the hard drive where Ubuntu is running. Windows 7 did not see the hard drive where Ubuntu is running. So I understand that I need to format the partition where Ubuntu is running, install Windows 7 and later on Ubuntu 10.04 which will create the boot for the three systems. But I want to backup Ubuntu's installation, and after installing Windows 7, install the backup. So I will need to add the file for the dual booting. How can I do it? Is it there any piece of software that could create the three booting option that I need?
I see a cdrom0 in "Places", but get the following error when access:
"Unable to mount cdrom0. mount: no medium found on /dev/sr0"
I do see the following mount points in the filesystem under media:
/media/cdrom0 /media/cdrom1
I assum my fstab entry is incorrect... not sure how to resolve though. I'd like to get my DVD+RW working, so I can burn a Live CD and re-install from scratch instead of upgrade.
I am trying to install ubuntu netbook remix on acer aspire one netbook. I used the usb-creator.exe tool to make bootable usb drive. When I boot from the usb drive it comes up to the boot options screen. But when I try to either install or run ubuntu from disk it goes to a black screen and stops or goes to a page long error message saying "cannot mount drive" and a list of command options. I also am not sure if setup gives you the option to reformat the hard drive. Or if this has to be done prior to booting from ubuntu usb-disk.
i'm running ubuntu 10.04 and windows vista on my laptop and I installed Dos box on ubuntu quite some time ago, when i went to mount my d drive (like i usually do in windows) I got the error message "directory D: does not exist" i tried to fix it myself but i gave up because it wasnt that important. A while later i read on a webpage that "Linux doesnot employ the concept of drive letters" so i thought this must be the reason for this error message but why would there be dosbox for linux if that was the case
I want to install the 10.10 desktop on the second hard drive on my desktop machine. After searching and reading posts for the last two nights, I see it is not as simple as I have been told. There are a few points that I have not found a full explaination on how to do.I want to place Ubuntu on the second hard drive to keep it away from the Windows OS on the first drive. From what I see during the installation, it appears to me that the second drive is shown as /dev/sda3. I have read you need a "/" for a root file or you will receive the "No root file defined error". Well I have found no way to create this or to select a "mount point".From running the desk top without installing it, the program looks "interesting". Would like to get it working. But I have to get past these "/" "root", "mount point" problems.
I want to add another drive to my desktop machine so that I can use a Windows partition to do some gaming and use HTC Sync. What would be the best way to do this?
I've made a startup disk with a 2GB USB stick, following the instructions from Then I tried to use this USB disk to install Ubuntu in a new computer.The computer can boot from the USB drive successfully, but after I click "Install Ubuntu", it reports that my computer doesn't meet the requirement of "has at least 2.6 GB available drive", but actually my computer has 2*500 GB hard disk which can been recognized in BIOS and displayed in the BOOT option list.How can I fix this issue? btw: if I don't choose "Install Ubuntu" but "Try Ubuntu", the system will hang forever.
