I cannot install ubuntu on the machine below. It cannot mount the cd-rom drive for some odd reason (SATA drive).
How can i install ubuntu onto this machine?
I've tried the Universal USB Installer, but that doesn't support the alternate iso. And if I select the regular desktop one, it screws up the installation when I try to boot.
Unetbootin gives me this error during the cdrom process. It says it can't find copy files from cdrom and stuff. Well of course, there's no cdrom...
i have a Compaq Presario S4020WM
2.0Ghz XP2400 CPU
768Mb RAM
2 40Gb Hdd
and a HD raedon 4650 AGB 1Gb Grafics Card
I have tried to install Ubuntu with this CD and it gets past the keyboard detection part and then it tells me i need to get the CD ROM drivers via removable media, i know this is a problem with ubuntu 10.04 because i can install just fine a 8.04 ubuntu.
i don't know what to do.I have tried to install from a USB but my comp is too old for that, i know its not the specific cd because i'v used about 5 different brands of cd just to see if it was the cds i was uesing,
I would just upgrade from 8.04 to 10.04 but i get to the dbus part and the comp starts to run really slowly and eventually colors just show up, i left it for an hour to see if they would go away and fix but they didn't. Iknow my comp CAN run 10.04 because i have done it before, but i uninstalled and now i can't seem to get it to work again.
P.S. i have tried the live cd, same effect.
Fails to insatll from a SD card using USB, it looks for a CD rom when there is none... will not allow me to go on without a CD rom? i need to encrypt my drive? why don't the normal cd do this just like the other linux sysetems? hide it if you have to.
View 1 Replies View RelatedToday I decided to replace my 9.04 install with 10.04. (I did this on a separate hard disk.) As I am a big fan of LVM I used the 'Alternate' install CD. Everything installed fine.
However, upon booting I observed two things: firstly there was no grub menu. No countdown timer, no menu. Just a flickering cursor. After 15 seconds or so I got a message telling me that:
Code:
/dev/mapper/bromine-root (My root partition.) does not exist and that it had given up waiting. Finding this kind of strange I tried the alpha of 10.10 --- same again. Hence I have two questions: firstly, where did the nice grub menu go; secondly, what is wrong with LVM and grub these days? At the initframfs prompt I am thrown to there are some LVM utilities and they appear to show my volumes.
Switching back to my old pair of hard disks and everything works as expected (i.e, the hardware is fine and supported by Linux.)
I downloaded the Xubuntu 10.04.2 Alternate Install CD ISO file from http://mirror.anl.gov/pub/ubuntu-iso...10.04/release/
When I checked the md5sum of the downloaded file, however, there was a mismatch.
The md5sum given at both http://mirror.anl.gov/pub/ubuntu-iso...elease/MD5SUMS as well as https:[url].... is 209cfc88be17ededb373b601e8defdee *xubuntu-10.04.2-alternate-i386.iso but running the command,
Code:
md5sum xubuntu-10.04.2-alternate-i386.iso generated the following, obviously different checksum for me:
098674ad5a59f0115030c5c0c3973899 xubuntu-10.04.2-alternate-i386.iso
(It also took unusually long to generate the checksum- around thirty minutes.)
Is it possible that the file was corrupted or tampered with on the server?
UPDATE: decided to reinstall and run the partitioner to get rid of the raid. Not worth dealing with this since seems to be lower level as /dev/mapper was not listing any devices. Error 15 at grub points to legacy grub. So avoiding the problem by getting rid of raid for now. So ignore this post. Found a nice grub2 explanation on the wiki but didn't help this situation since probably isn't a grub problem. Probably is a installer failure to map devices properly when it only used what was already available and didn't create them during the install. I don't know, just guessing. Had OpenSuSE 10.3 64bit installed with software raid mirrored swap, boot, root. Used the alternate 64bit Ubuntu iso for installation. Since partitioning was already correctly setup and the raid devices /dev/md0,1,2 were recognized by the installer, I chose to format the partitions with ext3 and accept the configuration:
/dev/md0 = swap = /dev/sda1, /dev/sdb1 = 2Gb
/dev/md1 = boot = /dev/sda2, /dev/sdb2 = 256Mb
/dev/md2 = root = /dev/sda3, /dev/sda3 = 20Gb
Installation process failed at the point of installing grub. It had attempted to install the bootloader on /dev/sda2 and /dev/sdb2. I moved on since it would not let me fiddle with the settings and I got the machine rebooted with the rescue option on the iso used for installing. Now, I can see the root partition is populated with files as expected. dpkg will list that linux-image-generic, headers, and linux-generic are installed with other supporting kernel packages. grub-pc is installed as well. However, the /boot partition or /dev/md1 was empty initially after the reboot. What is the procedure to get grub to install the bootloader on /dev/sda2 and /dev/sdb2, which represent /dev/md1 or /boot?
Running apt-get update and apt-get upgrade installed a newer kernel and this populated the /boot partition. Running update-grub results in a "/usr/sbin/grub-probe: error: no mapping exists for 'md2'". grub-install /dev/md2 or grub-install /dev/sda2 gives the same error as well. Both commands indicate that "Autodetection of a filesystem module failed, Please specify the module with the option '--modules' explicitly". What is the right modules that need to be loaded for a raid partition in initrd? Should I be telling grub to use the a raid module?
I have a Gigabyte 6A-M61P-S3 with an nVidia chipset, and I'm using the built-in graphics rather than a discrete graphics card. Ubuntu 10.10 and previous releases ran flawlessly on it using the nouveau drivers. I tried doing an upgrade to 11.04 using the Alternate AMD-64 CD, and it seemed to complete successfully, but when it came time to reboot, I had no video output at all after the BIOS screen. This is a test machine, so I went ahead and did a clean install using encrypted LVM with the Alternate AMD-64 CD after confirming that 64-bit 11.04 ran fine using the Live CD.
The installation went fine, but the first reboot flashed a brief "error: no video mode activated" and then I lost all video output. Subsequent reboots didn't give me any error message, but I had no video output. I suspect there are some boot parameters that would have gotten the nouveau driver working, but I wanted to try Unity, so I rebooted to get the Grub menu, chose Recover Mode, selected failsafe graphics, and got to the Desktop, then installed the proprietary nVidia driver (current) and once I rebooted everything was golden.
is there any way to do a 11.04 Alternate Command Line Install without Internet Connection? I try to install Ubuntu on a Internet-Tablet, wich has no Ethernet-Port and I don't know how to get Wifi to work during Alternate-Install. At previous Ubuntu versions it was possible to let network be unconfigured and install completely from CD or USB-Stick. Isn't this possible in current versions?
View 1 Replies View Relatedwhen i try to boot the 11.04 64-bit alternate.iso i get the following message, after it says that isolinux blabla is loaded: EDD: Error 8000 reading sector 2855 and when i remove the cd it says: gfx.c32: not a COM32R imageand then there is a grub-shell.
View 2 Replies View RelatedI have Redhat linux 4 and 5, I need to know if there is a way to create an alternate/standalone boot drive to recover a system from a disaster.
View 1 Replies View RelatedLong story short - I'm looking to run a live CD so I can alter my existing 10.10 x64 installation. The standard desktop install CD results in a graphically corrupted window (a grainy grey field). The alternate install CD does get me to its text menu, but the shell I open operates on the ramdisk the install CD creates, not the existing hard drives. I can't seem to get the alternate install CD to do anything to my existing file system.
I'm using the x64 alternate install CD off a USB key. Short story long - I'm trying to convert from ext3 which I've inherited from upgrading all the way from Warty, to ext4. I see instructions on how to do it and the best way is using a live CD, so I need to see the existing file system from the live CD via a shell.
As my 10.10 install is working just fine, I'm getting less and less inclined to mess with it at this point, so I may just abandon it. But I understand ext4 is much faster than ext3, plus I always learn a lot when I go through things like this, so this is just a question before I give up.
I was thinking of creating an extremely minimal version of Xubuntu using XFCE. I have a Dell Mini 9, a netbook that uses a wireless-g card requiring bcmwl-kernel-source to work.What I would like to do is use either the alternate CD or mini.iso minimal install file to perform a command line install-style installation of the system.So far, what I am thinking (from reading this [url].... article:
HTML Code:
http:[url].....is to start off with these packages to begin with:
xorg
slim (if possible with 9.10, unsure if it is still available. in short, i want to use a lightweight display manager)
xfce4
xfce4-goodies
xubuntu-default-settings
bcmwl-kernel-source
aptitude
My opening questions are: Should I go with mini.iso or the Xubuntu Alternate Install CD (or the Ubuntu one)? If so, which one? What additional packages will I need to make the hardware accessible and fully functional? All I can think of so far would be sound (I'd like to stay away from PulseAudio if possible, it wreaks havoc with my computer), my webcam, and the memory card slot, if additional packages are needed for it?What other "core" packages should I include in this list? Should I include Synaptic, or other packages, and why?What do I need to take into consideration, since this is both a directly- and battery-powered computer?
HTML Code:
http://ubuntuforums.org/showthread.php?t=1155961
post regarding a "Ubuntu-Desktop-Minimal"-type system.
Every time I try to mount usb drive a window pops up and says "unable to mount usb drive Not Authorized".
View 9 Replies View RelatedI have an LG DVD+RW and an older DVD drive...FSTAB contains the following:
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
I see a cdrom0 in "Places", but get the following error when access:
"Unable to mount cdrom0. mount: no medium found on /dev/sr0"
I do see the following mount points in the filesystem under media:
/media/cdrom0
/media/cdrom1
I assum my fstab entry is incorrect... not sure how to resolve though. I'd like to get my DVD+RW working, so I can burn a Live CD and re-install from scratch instead of upgrade.
i have download openSUSE and can't get it to mount on my hard drive i try and try but it sill won't stay on the hard drive. i like what i see on this os but can't use it.oh the PC im trying to put this os on is a hp m8530f a very good PC at that but i want to use this openSUSE.
View 3 Replies View RelatedI've added a 1TB hard drive as a second hard drive on my PC, mostly because my home partition is full of music and movies, but I am unsure of where to mount it (or what to mount it as). "Yast Partitioner" suggested /tmp /srv or /localI basically want a storage solution for media files which can be accessed by multiple users (including a windows PC using samba)
View 9 Replies View Relatediam trying to access tape drive .but iam not able to see its location.is any command to install and access tape drive
View 2 Replies View RelatedI am trying to install ubuntu netbook remix on acer aspire one netbook. I used the usb-creator.exe tool to make bootable usb drive. When I boot from the usb drive it comes up to the boot options screen. But when I try to either install or run ubuntu from disk it goes to a black screen and stops or goes to a page long error message saying "cannot mount drive" and a list of command options. I also am not sure if setup gives you the option to reformat the hard drive. Or if this has to be done prior to booting from ubuntu usb-disk.
View 3 Replies View RelatedNew 10.10 desktop installation on an Acer Aspire 5515 32 bit Vista Home Basic/ 3 GB RAM. There was no option during the Ubuntu installation to select the Windows partition/drive for access via the Ubuntu installation, and the drive does not now appear in "Places." The reason I used 10.10 was because the 10.04 installation on the same machine also would not allow mounting of the Windows drive. However, there was an option to select the Windows drive during the 10.04 install. Couple of things I noticed that were "different."
1) During the 10.04 installation (over which the 10.10 install now resides) there was an option to select either or both of the two user accounts - both administrative - in the Vista installation. I hadn't noticed that before on previous installations. I choose both accounts for later importing, but, again, there was no option to mount the drive upon the finished Ubuntu installation.
2) There could be an issue with what I did with the partition/naming on the Vista installation. Upon restoring to factory settings, I deleted the (10 GB!) restore partition and resized Vista to occupy the newly opened space. But the GRUB entry for Vista says "Windows Recovery Environment" instead of "Windows" or whatever it usually does.
Everything else about this dual-boot installation system is just fine: everything boots and updates and so forth. But I really need that Windows drive to mount so that my friend's kids can import iTunes and other files from Windows to Ubuntu. I also want to be able to run Avast scans on Windows from Ubuntu. I did rummage around a bit by way of locating a solution for this problem, but I can't find anything which "works" or is on point.
I did the latest update on the opensuse 11.4 other day and since then my USB drive is not mounting. initially I thought its gone because my son dropped on the floor. But then when I plugged it to Windows 7 machine it mounted then I plugged it into another Ubuntu 10.10 machine it mounted so I figured out the there is some issue in the latest update. I have all the VMs in this drive and my main laptop is with OpenSuse 11.4
View 9 Replies View RelatedIs the OEM install included on the regular CD or the alternate install CD?
View 4 Replies View RelatedI am trying to do a 'light' install of Ubuntu 10.04 using the alternate install CD. Here is how i am planning to do it:
1. Perform a console only installation(Standard system only on d-i tasksel)
2. Install gnome-core
3. Then install the packages i need using apt.
1. Would such an installation lead have any significant performance(RAM usage) advantage over a full fledged installation?
2. Is there a way i could install gnome-core from the installation CD instead of downloading them from the repository?
3. Would installing just gnome-core mean that synaptic & update-manager wouldn't be available? i am hoping that it wouldn't be the case I checked their dependencies from packages.ubuntu.com, it doesn't look like they need gnome-desktop-environment to be installed first.
4. Would such an install have any more device driver related issues (eg.display drivers) than a regular install?
[URL]
I run a headless Ubuntu 8.04 server, which acts as a web, email and file server. I am sticking with 8.04 as it is a LTS release and will upgrade to the next LTS when it is released.
I have two external USB drives, that I need to mount at boot. I have been using /etc/fstab up until now, with the following entries:
Code:
However, as I gather from doing searches is quite common, occasionally I get an error during boot (causing the system to drop to a recovery shell) because the USB drives take time to wake up and the system hasn't found them by the time it reads /etc/fstab.
From doing searches, it seems there is nothing you can do to fstab to fix this, so you need to mount them using an rc.local script instead, using:
Code:
The problem is, as I have two USB drives, their /dev/sdxx location changes between boots. I thus want to use UUID codes as I do in fstab, however I haven't found anything about this.
Does anyone know how I can use the mount command and UUID to mount a drive in rc.local and what options I have to use the mount the drive with the same options that I am using in my fstab entry? Obvisouly, I can't refer back to fstab using the mount command, because then I will still get the boot error issue if they are listed in fstab. And there is no space internally for the USB drives as there is already two internal drives.
I've upgraded to the new 10.04, and when I have the Alternate CD in, it shows on my desktop, and I can search all the contents of the CD, so I know it's registering. But when I try to install anything, via the terminal, .deb packages, synaptics package manager, it always asks me to insert the CD. Then I click ok and it says it's not mountable, even though I know it is because it's on my desktop.
View 3 Replies View RelatedI am trying to fix this little 2GB netbook, and I am now wondering, how do I get a GUI installed after I install Ubuntu Desktop Edition (Alternate Install)?
View 6 Replies View RelatedIs the Ubuntu LTSP install still on the alternate CD as of Karmic? Or has it been moved (say, to the server CD)? Websites say it's on the alternate, but there's no way of knowing if they're up-to-date.
View 1 Replies View RelatedI have 2 internal drives. One is for the OS and one is for the Data. I tried to get the Data drive to mount automatically at login using some crap I found on a linux blog. Safe to say it didn't work and now I can't mount it with the OS on the OS Drive.
It mounts from a live CD and all the data is perfectly safe. When I try to mount the drive I get this error message: "Error mounting: mount exited with exit code 1: helper failed with: mount: only root can mount /dev/sdb1 on /media/data" What have I done wrong and how can I make it mount again? Preferably this time at login.
I want to mount external hard drive using fedoracore 15 on a Verbatim 500 GB.
View 1 Replies View RelatedAs my proficiency with Linux improves slowly, I've been trying to find the answers for myself, but in this situation I must admit I find myself rather stumped. I have a perfectly nicely working Fedora 12 install on an 80GB SATA drive, and when it hit an error and wouldn't boot last week (easily fixed with fsck from the initial command line) I panicked and ordered a new 250 GB drive. It got here and I might as well use it, I thought to myself, so I went about trying to figure out how to move my install without having to reset all of my settings, programs and so on. I didn't want to mess with dd because I'm not so so clear on resizing my partitions once the copy is done (if someone thinks this is a better idea I'm open to suggestions.) After some poking around I found this set of instructions which I attempted to follow to the letter, but hit some snags. I understand this thread I am referring to may be a bit outdated, which is why (I assume) I hit a bump here
Code:
# mount /dev/hdy1 /boot
mount returns an error demanding I specify the file system type. At a loss, I barreled on until
Code:
[Code]...
To summarize, I partitioned and mounted my new drive using fdfisk and the instructions provided above, then used rsync to copy over all of the files, so as far as I know the new drive is ready to go, just not yet bootable. Opening the Grub.conf file in Kwrite (as root) returns a blank page. What do I do now?
As a side note, you can see that I am not too squeamish about the terminal, so I would prefer to find a "command line only" solution to this relatively simple (?) procedure.