I've just installed ubuntu 10.10 (64bit) on my 1TB drive where as I have my windows drives on a seperate 2x 1TB drives in RAID and am not exactly sure how to mount it.
I am not finding it under computer or under NTFS configuration tool and when I click mount under storage device manager it does nothing, although does detect the RAID array as /dev/sda2
I had to recently reinstall ubuntu because 10.04 started acting up on me. I reinstalled 9.04 but I don't know how to mount my RAID drive without messing with the data that's already on there. I have the UUID for the RAID but fstab isn't able to find it. I also previously used RAID software but I don't remember which one I used. how to mount my drive so that ubuntu can see it?
View 5 Replies View RelatedI have been trying to share folders from my main PC which is running Ubuntu 10.04. I have been able to figure out Samba enough to get my a couple of folders shared, but I have been unable to share any folders which are on my external harddrive. After entering the path in my smb.conf file they appear on the network but I am unable to navigate to them. When trying to navigate to them through the network folder on the pc they are actually connected to I get an "Unable to mount location: Failed to mount windows share" dialog box. On the windows pc I am trying to share with I get, "Windows cannot acces \Josh-Desktop
ame of folder"
My smb.conf file looks like this:
That folders I cannot access are Music and Videos.
Not able to mount windows drive & foder, in linux. i have got following error.
mount error 92 = Protocol not available
I have a pre-existing setup with Windows XP Professional and CentOS5.5 on a dual boot setup with the Linux drive setup as the primary drive hosting the grub menu.
I am replacing these machines with new updated ones and they have windows setup on a RAID0. I think it would be easiest to follow my previous setup and move the RAID to secondary SATA ports and put the linux drive on the primary SATA port, or should I just change the boot order in the BIOS to have the secondary linux drive boot first?
can I move a RAID setup to secondary controller ports without breaking the RAID?
I installed Ubuntu 10.04 and I love it. the only problem I'm having is that I can't seem to mount my windows drive in order to see my files(music, pics, vids). How can I do this? I have 4 500gb disks and i can only see two of them and neither one is my windows drive. Windows 7/ubuntu 10.04 installed using wubi.
View 5 Replies View RelatedWindows XP Laptop hard drive is stuck in a hibernated mode. Will not let me access it through Windows, period.
I loaded Ubuntu Live on the suggestion of a coworker in order to retrieve my important files by hooking up the Windows HD through a USB adapter (Inland).
Ubuntu recognizes the 160GB HD, but refuses to mount the drive because "Windows is Hibernated." I Know my disk is hibernated, I need a way to get my important files from the drive...
(Screen Shot Attached in .jpeg format)
I know very little abount Ubuntu so please keep that in mind with your gracious replies.
i m install linux 5 with windows xp sp2.i want to access windows drive but i not accessed . access drives in linux 5 .
View 2 Replies View RelatedI have a friend of mines computer that is hosed and gets the BSOD. He has pictures of his grandson on there that her really needs before I fix it. Is there a way to mount the main windows partition while running the Live CD? I have tried it and get an error but I am not able to get it working.
View 5 Replies View RelatedNew 10.10 desktop installation on an Acer Aspire 5515 32 bit Vista Home Basic/ 3 GB RAM. There was no option during the Ubuntu installation to select the Windows partition/drive for access via the Ubuntu installation, and the drive does not now appear in "Places." The reason I used 10.10 was because the 10.04 installation on the same machine also would not allow mounting of the Windows drive. However, there was an option to select the Windows drive during the 10.04 install. Couple of things I noticed that were "different."
1) During the 10.04 installation (over which the 10.10 install now resides) there was an option to select either or both of the two user accounts - both administrative - in the Vista installation. I hadn't noticed that before on previous installations. I choose both accounts for later importing, but, again, there was no option to mount the drive upon the finished Ubuntu installation.
2) There could be an issue with what I did with the partition/naming on the Vista installation. Upon restoring to factory settings, I deleted the (10 GB!) restore partition and resized Vista to occupy the newly opened space. But the GRUB entry for Vista says "Windows Recovery Environment" instead of "Windows" or whatever it usually does.
Everything else about this dual-boot installation system is just fine: everything boots and updates and so forth. But I really need that Windows drive to mount so that my friend's kids can import iTunes and other files from Windows to Ubuntu. I also want to be able to run Avast scans on Windows from Ubuntu. I did rummage around a bit by way of locating a solution for this problem, but I can't find anything which "works" or is on point.
On this LAN we have: Windows 7 desktop, 192.168.1.2 Ubuntu 10.04 desktop with ext4 filesystem, 192.168.1.5
On the Windows 7 system, how do you mount a Ubuntu "/home/myHomeDirectory" (ext4 filesystem) as "drive U:" ?
So that U: => 192.168.1.5:/home/myHomeDirectory One possibility is a commercial product called ExpanDrive.
Alright, this hard drive that I need to mount is on a windows machine, in a different town. What would be the best approach for this?
View 4 Replies View RelatedIs it possible, using Ubuntu 9.04, to mount a USB HDD that's been formatted on a Mac (HFS+?)
View 5 Replies View RelatedI have a RH5 box and develop on Windows. I'm looking to mount the root dir of the RH machine just for ease of integration and automatic deployment to the linux box. I'm using WinSCP at the moment but that (from what I can find) only opens a window, which isnt accessible from eclipse.
View 1 Replies View RelatedI have 2 USB drives connected to an XP machine that I rotate twice a month for backups. On my CentOS box, I have that drive mounted at /home/backup using cifs.
Because the drive is mounted on the Linux box, Windows XP complains when I try to "Safely Remove Hardware". As a result, I have to "umount /home/backup", then "Safely Remove Hardware". After connecting the new drive, I then have to "mount /home/backup" in order to use it again on the Linux box.
Now, this question may be a Windows XP question, but I was wondering if there is anything I can do on the Linux box first. Is there anything that can be done on either end, so that I won't have to "umount /home/backup" first?
I have a friend of mines computer that is hosed and gets the BSOD. He has pictures of his grandson on there that her really needs before I fix it. Is there a way to mount the main windows partition while running the Live CD? I have tried it and get an error but I am not able to get it working. Does anyone else know any other tricks I can do to help get my friends pictures of his grandson off there?
View 7 Replies View RelatedHow long does hardware Raid card (raid 1, 2 drives)take to mirror a 1 TB drive (500gb used)?Is there a general rule of thumb for this?4 hours? 12 hours? 24 hours?
View 1 Replies View RelatedI'm running OpenSuse 11.2. I've got it running mostly the way I want and it connects to my wireless internet no problem. I have a external hard-drive on my Windows machine setup as a share folder. I can mount the drive with:
Code:
mount //10.13.23.2/D /home/james/mnt/win However when I do mount like this it doesn't give my any read/write privliages on the drive. Also on a slightly different issue but still mounting related I have my HDD partitioned into four main drives (not including swap etc). They are my Windows drive, a seperate storage partition formatted for Windows, my main linux drive and a seperate parition for linux storage.
I want to have my Windows drive, my Windows storage drive and my linux storage drive all mounted on boot. I tried adding these to fstab, and they mount fine but again I have no read/write permissions. My fstab looks like this:
Code:
/dev/disk/by-id/ata-WDC_WD2500BEVT-35ZCT0_WD-WXE908AE4273-part5 swap swap defaults 0 0
/dev/disk/by-id/ata-WDC_WD2500BEVT-35ZCT0_WD-WXE908AE4273-part6 / ext4
[code]....
Lastly I would like my Windows Share drive to mount on boot but I have been advised that I would need to write a shell script for this, to do network checks as obviously I won't always be connecting to my network.
I have recently set up an ubuntu installation on an old PC. After some fiddling with both it, and the windows 7 machine, I have managed to share all of my drives. However, when attempting to access them from ubuntu, only 2 of the 4 hard disk shares will mount, with the other 2 failing with a Unable to mount location, failed to mount windows share error message.
View 2 Replies View RelatedI downloaded centos from their official bittorrent.It contained two iso files and md5sum.txt,sha1sum.txt and sha256sum.txt and also md5sum.txt.asc,sha1sum.txt.asc and sha256sum.txt.asc.Now when I mount iso file to virtual drive there is no autoplay option.Can you tell me how to install it.I dont see any setup file?
View 3 Replies View Relatedi'm running ubuntu 10.04 and windows vista on my laptop and I installed Dos box on ubuntu quite some time ago, when i went to mount my d drive (like i usually do in windows) I got the error message "directory D: does not exist" i tried to fix it myself but i gave up because it wasnt that important. A while later i read on a webpage that "Linux doesnot employ the concept of drive letters" so i thought this must be the reason for this error message but why would there be dosbox for linux if that was the case
View 2 Replies View Relatedmy linux server is running with an old IDE hard drive getting these hdparm results:
[code]...
i have a WD Raptor drive i'm going to install and put a fresh install of linux on it. i'm just curious, will using a much faster HD as my main drive increase the speeds of my network transfers from the raid drive? do transfers only go as fast as the system drive?
I run a headless Ubuntu 8.04 server, which acts as a web, email and file server. I am sticking with 8.04 as it is a LTS release and will upgrade to the next LTS when it is released.
I have two external USB drives, that I need to mount at boot. I have been using /etc/fstab up until now, with the following entries:
Code:
However, as I gather from doing searches is quite common, occasionally I get an error during boot (causing the system to drop to a recovery shell) because the USB drives take time to wake up and the system hasn't found them by the time it reads /etc/fstab.
From doing searches, it seems there is nothing you can do to fstab to fix this, so you need to mount them using an rc.local script instead, using:
Code:
The problem is, as I have two USB drives, their /dev/sdxx location changes between boots. I thus want to use UUID codes as I do in fstab, however I haven't found anything about this.
Does anyone know how I can use the mount command and UUID to mount a drive in rc.local and what options I have to use the mount the drive with the same options that I am using in my fstab entry? Obvisouly, I can't refer back to fstab using the mount command, because then I will still get the boot error issue if they are listed in fstab. And there is no space internally for the USB drives as there is already two internal drives.
If I have a windows installed in raid-0, then install virtualbox and install all my linux os,s to virtualbox will they be a raid-0 install without needing to install raid drivers?
View 1 Replies View RelatedI have 2 internal drives. One is for the OS and one is for the Data. I tried to get the Data drive to mount automatically at login using some crap I found on a linux blog. Safe to say it didn't work and now I can't mount it with the OS on the OS Drive.
It mounts from a live CD and all the data is perfectly safe. When I try to mount the drive I get this error message: "Error mounting: mount exited with exit code 1: helper failed with: mount: only root can mount /dev/sdb1 on /media/data" What have I done wrong and how can I make it mount again? Preferably this time at login.
I have a computer running Ubuntu 10.10. I am using it to share many hard drives connected to it. I am using Samba. I have successfully shared many folders to one Windows user. I am attempting to share other folders within the shared folders to another user as read only but have not had any success. When I attempt to connect to one of the shares from another computer running Ubuntu 10.10, logged into an Administrator account with the same username and password which I setup on the Samba share I get the error: "Unable to mount location" "Failed to mount Windows share"
View 3 Replies View RelatedHow do I configure my Debian installation to mount external USB drives to mount points based on the volume names of the drives? For instance, if I have a thumb drive with the volume name of "SWORDFISH," how do I have Linux mount it at /media/SWORDFISH? I'm aware that this can be setup in FSTAB, but that requires that I know the UUID of the device beforehand and that I take the time to set each external device up in FSTAB first. That does nothing for me when I have a thumb drive that has never been plugged into my computer before.
This seems to be setup by default in Ubuntu/Kubuntu, but is not working for me with a fresh installation of Debian Squeeze and KDE4. I've spent the past 2 hours Googling for a solution and have turned up nothing. UPDATE: My results are inconsistent. Sometimes Debian mounts devices to mount points based on the volume names, and other times it gives them generic mount points (e.g. /media/usb1).
I have servers installed with RHEL 4 2.6.9-89.0.9 ELsmp. I tried using uuid and label in /etc/fstab to automount usb drives to mountpoints that I specify after reboot. Unfortunately, it just does not work in all my RHEL4 servers. After every reboot, /etc/fstab will be automatically modified and all configurations related to my USB drives will be changed. Irregardless of whether i use UUID or LABEL in my /etc/fstab.However, it works on RHEL5. But, upgrading is not an option in my environment. I have been googling around looking for alternatives but everything seems to point back to using UUID or LABEL in /etc/fstab. Anyone has tried something that works? Please help me, thank you.
View 7 Replies View RelatedAfter update/upgrade; previously existing RAID no longer auto-mounts.
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes[code]......
I am running 64bit ubuntu 10.04. I have an nvidia software raid formatted with ntfs. The raid only mounts about every 10-15 boots. It is completely random on when it will mount. I even have included "force" in the ntfs-3g mount options.
Also, possibly related, many times ubuntu will not even load unless I load windows first and then restart. I run Ubuntu on its own partition using ext3, so this makes no sense.... It makes me scared to run a computer with only Ubuntu because it seems Ubuntu cannot load unless window loads before it! I could understand this if Ubuntu was formatted as NTFS, but the only NTFS drive Ubuntu sees is the raid, which is not mounting anyways, so why is it dropping to the command prompt?