Ubuntu Installation :: 10.04 Desktop Installer Doesn't See All Partitions
May 5, 2010
When trying to install Ubuntu 10.04 desktop from USB pendrive I can't see the sda partitions in the manual partition editor.I have a dual boot PC with Windows XP Pro and Ubuntu 8.10 running (see below for more details). Using the 10.04 Ubuntu desktop edition on a USB stick (pendrivelinux), I can boot without a problem and everything works fine: mount/unmount of all my drives, read data, etc. But I can't install the 10.04!When running the installer, at the point where the partition is selected, I choose "manual" as option. On the next screen I only see the drives/partitions starting from /dev/sdb1... to sde, but NOT /dev/sda. The "Add" button is greyed out, I can only edit the existing partitions. When I edit and press forward I get an error telling me that the SWAP partition is missing. I already HAVE a swap on sda.
I also tried booting Ubuntu 10.04 and then running the installer - no difference. I also remove the plug from one of the drives (sde) - still the installer doesn't show me sda.I would like to install 10.04 without messing up my Windows XP Pro and without messing up my /home partition or any other partitions that are non-Ubuntu stuff.In former years this used to be the easiest part, now it looks like a challenge. Any help is appreciated. System and background info:Hardware: Desktop PC with Intel Core 2, Nvidia graphics card, 5 SATA hard drives hooked to Gigabyte mother board, two network cards (only one in use)Current OSes: Windows XP Pro on sda1, Ubuntu 8.10 on sda and sdb
When I tried to install Ubuntu 9.10 or 10.04 (from CD or USB drive), and selected manual partitioning, the installer would not show all my drives.
However, when booting the life CD/USB, gparted or the Disk Utility did recognize all drives and partitions.
It turned out that one of my drives was marked as RAID partition, although I never used RAID!
Here the symptom:
When you run the installer and select "manual partitioning", the resulting list of drives and partitions is incomplete. In my example it was:
sda - sda1 sdc - sdc1
[Code]....
You may have multiple drives with the RAID metadata on it. In that case you need to repeat the above command for all those drives. Just make sure you don't wipe out your existing RAID, if you have one.
Reboot the system and see if it works.
P.S.: Also check your BIOS settings - do you have drives configured as RAID?
I'm trying to install ubuntu 10.04 on an old computer, but the installer doesn't have any listed partitions and I can't go any further. The hard drive I'm trying to install it to was just formated in Windows 7, it's a clean hard drive. Uh, how am I supposed to install it?
I downloaded this "debian-6.0.1a-amd64-netinst" iso image....But on the partitioning screen, after selecting the manual partitioning, it shows the whole hard disk without detecting the XP partitions.
I used Ubuntu before, without problems but since the 10.04 version it won't recognize my partitions. I formated my laptop and partitioned it, installed Windows 7 64bit, which I need for my work, and wanted now to install Ubuntu 10.04/10. I then used GParted to check my Harddisk and it is having troubles to recognize my partitions, too while Windows finds them. GParted is giving me an error message saying my partitions are oversized. I am still in the beginning of my Linux experiences and so I don't know what to do. I have two 250GB harddisks (how Windows recognizes them),
I try to install Ubuntu 10.10 on HP notebook G62 (Intel-i3, 64-bit). It have a 320GB hdd with my laptop which now consists of:
1) SYSTEM volume 2) (C: ) volume with windows 7 3) RECOVERY (D: ) volume 4) HP_TOOLS volume
1 to 4 are originally there. And now I shrink (C: ) by 50GB to get a unallocated space in which I decide to install ubuntu: First I try to shrink by Windows7 tools, but installer did not see unallocated space (but shows list of my volumes). Then I install Acronis disk director and made 50GB unallocated space by Acronis. After this Ubuntu installer does not see any volumes on my HDD Windows7 boots had works normally. I try to restore ALL from image by HP TOOLS but without result - installer doesn't see any volumes. I try boot from CD, remove dmraid and all raid package and try run installer - no result.
Xubuntu 9.04 installation CD not detecting any of the current partitions. This all started when I reinstalled windows XP a few days ago.After, the computer wouldn't boot into GRUB and would boot directly into windows.Other threads have dealt with a similar issue, that of overlapping partitions causing libparted/parted/gparted to detect the whole drive as unallocated space. The problem in these threads seemed to be a corrupted partition table, in which the partitions overlapped with each other. So of course I checked the output of fdisk -l for overlapping partitions, but I don't see any obvious overlapping partitions. I've noticed that the partition that used to be linux swap isn't showing up in the partition table at all. I might just be missing something simple here and would like another set of eyes to help me figure this one out. Does the problem have anything to do with the partition table being out of order (ie. not in order of what regions they cover on the drive)? From the liveCD I've run
I have windows installed in c drive and there are 3 other partitions namely e,d,f.I booted kubuntu/ubuntu live cd.The installer doesnt show any partitions.This is my windows:- http://imagebin.ca/view/Uj-KB26v.html
This is at kubuntu at installer step:- (Same is the case with ubuntu)http://imagebin.ca/view/wZBYBV.html
I'm trying to install Ubuntu 10.10 from my live USB disk. In My computer, it is showing all drives correctly, but when I try to install using the installer on desktop, it is showing the whole hard disk as free space and no partitions at all.
when I tried 'sudo parted' and then print command, I got the below error message.
Error: Can't have a partition outside the disk!
I formatted the C drive from linux using ext4 filesystem.
How can I make the ubuntu installer recognize my partitions?
HDD with four partitions: Three DOS bootable primary partitions are located in the head, and the residual extended partition is divided into several logical drives.
1st trial: 10.04 installer recognized the last largest logical drive for system installation, but installer truncated the extended partition, and created the "terrible" 5th primary partition at the end of the HDD. GParted and other utilities cannot access to this 5th primary partition. (So, I restored the lost partition table on the HDD manually by MBM. But several OS were broken.)
2nd trial: To avoid making this "terrible" 5th primary partition, I located the largest logical drive for installation at not of the end.10.04 installer recognized this logical drive, but failed again.I tried GParted. but also failed to formating to ext4.Maybe, 10.04 installer failed at this formating step. Logical drives are not supported in 10.04 ?
I have two hard disks, the one that I work with and another one for backups. The main HD had an OS (Ubuntu) partition, a partition for /home and a lot of free space.I installed latest Mandriva creating a new partition. Everything OK. But it overwrote GRUB and I couldn't boot into Ubuntu, so I reinstalled GRUB from the Ubuntu live CD. I got my Ubuntu back, but then it wouldn't boot into Mandriva. Well, I didn't care. But now the problem comes.
Right now, if I try to install Ubuntu from live CD, the installer won't see the partitions in my main drive. It sees the partitions in the backup drive, but the main drive appears as empty, no Ubuntu, no Mandriva, and no /home. Debian testing installer did just the same. Those partitions are there and I can boot into them and see them; it's only the installer that does not see them.
Wanting to dual boot XP with UBUNTU. Live CD verified good.
ran df in terminal:
Ran sudo fdisk -lu in terminal:
Partition table entries are not in disk order
Originally I had two partitions for Windows xp of 100 gig each. I cleared / backed up the second partition and created two 50 gig partitions, splitting the second into two linux (using Gparted) partitions labelled root and swap.
Disk Utility sees this hdd as a RAID component. It is connected through a RAID controller.
The installer (in allocate drive space step) doesn't see them for some reason.
Hardware: AMD Athlon 64+clawhammer processor Asus A8N-SLI mobo hdd as above 2 Gig RAM DVD / CD Burner
I am having trouble with the advanced partitioning, I dont know what any of the mount points are for. I have a 64GB SSD which I want to use only for the boot files, and I have a 640GB which I want to place everything else on, as to preserve the life of the SSD. How should I configure my mount points/partitions in the ubuntu 11.04 installer?
The instaler doesnt find my partitions and the XP that is installed too! For some reasons i cannot delete the whole hdd... if i format the partition, where (i want to install ubuntu) with fat, the pc crashes during the installing process after the tastaturlayout question! if i try some other formats, the installer tells me, that there are no Operating Systems installed and the hdd is unpartitioned!
if i start ubuntu live from the cd, the system finds all partitions, but if i run cfdisk in a terminal, i get a fatal error (cannot open disk space)... My machine is a acer aspire 1694 WLMi (pretty old, but should be no problem), bios is up to date, Windows is XP home edition with SP3.
I am booting from a USB stick live CD image of Kubuntu 10.04 Beta. When I run the installer, and choose the "manual select partitons" option, it lists only my full hardisk, whereas I have atleast 5 partitions on it, and none are shown. Could anybody help me with this? I want to install on one of the partitions and leave the rest intact. I am dual-booting BTW.
I've searched the forums, internet, etc... and I can't seem to find anything on this. I installed Windows 7 using ~70% of my available hard drive space, the other 30% is unallocated. there are two partitions, the 100MB 'System' partition and the NTFS one with Windows 7.
On my first attempt to install Ubuntu: The partitions didn't look right. It detected two NTFS partitions, the first one of 100MB, and a second NTFS partition using ~30% of my hard drive, and 70% (presumably Windows) as unallocated. I decided to go ahead and try to install it over the 30% NTFS partition thinking that maybe the installer just didn't recognize the free space right or something, but after that happened, Nothing loaded and my Windows partition was trashed.
I wiped the drive, and reinstalled Windows again with the 70/30 split. On my second attempt to install Ubuntu: On step 4 of the installation process (partitions) it doesn't detect my Windows 7 installation at all. Instead, it says the disk is 100% unallocated.
Does anyone know why the Ubuntu Installer is not detecting my Windows partition correctly? If so, how can I go about getting Ubuntu to see it and install itself along side Windows?
I have trouble installing ubuntu on my desktop machine. I had Mint before, reinstalled Win7 and wanted to upgrade to newest release as I didn't use Linux for some time.
Basically fdisk can see the disk but installer don't
I recently did a fresh install of Windows 7 on my laptop, then shrunk my partition and set aside some free space for Ubuntu. When I went to install Ubuntu, however, it told me that no operating systems had been detected on the system. I ignored this message and just installed Ubuntu on the free space, but when the installation was finished, GRUB failed to recognize Windows 7 as well and would only boot into Ubuntu.
After several attempts at getting GRUB to see W7, I eventually gave up and used my W7 CD to reinstall the Windows bootloader which, naturally, didn't detect Ubuntu and would only allow me to boot Windows.
I've tried messing around with my Windows partition a bit, but no matter what configuration I use, I can't seem to get the Karmic installer to see it. I've resorted to using WUBI for now, but I'd really like to have Ubuntu on its own partition in case something goes wrong with Windows; plus, I'd love to be able to use ext4 and GRUB. Anybody know how I can get around this issue?
I've used the same install CD on several other machines with Windows 7 and it recognized them just fine. It's only this one computer that's having the issue.
20GB Laptop HDD in external enclosure with USB interface. Formatted FAT32. Shows up in Windows as E:. The Universal USB Installer, however does not see the drive. Is that app only set to look for a true USB flash drive and I'm just doing it wrong?
I've been trying to install Ubuntu 10.10 on my custom built AMD Athlon FX-53 system to use as a web server. I downloaded the AMD64 desktop version and whenever I boot to the CD it'll go through the loading screen, bring up the install background and then the mouse cursor will appear. After that the mouse cursor keeps switching between the loading one and the regular one and it never fully loads the installer.
The system specs are:
AMD Athlon FX-53 @ 2.4 GHz (Stock) 1 Gb OCZ PC-3200 ram (2x512) PNY Verto FX5200 Western Digital 40 Gb IDE hard drive based off an Asus SK8V motherboard (Skate 5 to me...)
I was able to install the 32-bit version and I've tried 2 burns, one on a CD-RW and one on a CD-R and the checksum is the correct one based on whats posted on the site.
I'm trying to set up a dual boot of Ubuntu & Windows XP.I have two hard disks installed - sda is 80GB and has an existing Windows setup on it, sdb is my 160GB data storage disk.When I have installed Ubuntu on other machines, it has detected any exisiting OS's and offered to install Ubuntu alongside them.
However, this time Windows doesn't seem to be detected - it says 'no other operating systems found' and wants to install to my second (i.e. sdb) disk. I was intending for Ubuntu & Windows to sit side-by-side on the first hard disk.Although I've installed Ubuntu before, I'm a bit of a novice and I'm not sure how to achieve this - where am I going wrong?
I am about to make a fresh install of ubuntu 9.10 on my 160gb hdd and keep my home directory. Here I also have Windows XP installed, the swap, home and root. All of these are done manually and given names such as 'sda1', 'sda5' ect.(I do see them in system monitor > file systems) The problem is that the installer doesn't seem to show me these tables. I only get a 160gb big chunk. GParted will not show it either (but as root is running from their I guess it cant?).
I downloaded wubi.exe from Opera 10.61. The file downloads ok, but then refuses to do anything when I click on the file.
I also switched to my IE version, and tried to run the file from there. Again, I get the hourglass symbol for a couple of seconds, then nothing.
I'm running Windows 98. I know, I should have a newer version, but finances can't manage that right now. In the meantime, is there a manual way to run the installer for wubi and get it to work?
I'm trying to install DropBox so that the 'DropBox' folder gets placed in /dev/sda4 which is a spare ext4 partition on my disk. Root is /dev/sda1, swap is /dev/sda2 and home is /dev/sda3.
The DropBox installer does not show /dev/sda4 as a location to install it to in the 'Location' drop-down selector.
In Dolphin, the /dev/sda4 partition appears as '19.7 Gib Hard Drive'.
Do I need to do something to make /dev/sda4 accessible to the DropBox installer?
I am trying to install Debian Lenny (64 bit) on my brand new Toshiba laptop (intel i3, 3 GB RAM) and for some reason the installer cannot detect the ethernet card. This is the error message I get:"No Ethernet card was detected. If you know the name of the driver needed by your Ethernet card, you can select it from the list."And then there's a list which is quite long -- and I cannot replicate it here. But I want to know why the installer cannot find the ethernet card on its own or find the appropriate driver. In any case how can I fix this problem?
I have been upgrading from 9.04 to 10.04. Now, I want to install 10.10 from the beginning without losing the data in my current partitions but when I run the Maverick installer it recognize my disk as a whole with no partitions. From another posts, I suspect that the problem is in the partition list because it seems to be a duplicate partition but don't know how to fix it. This is the fdisk output:
Code: jgarcia@jgarcia-laptop:~$ sudo fdisk -lu /dev/sda Disco /dev/sda: 250.1 GB, 250059350016 bytes 255 cabezas, 63 sectores/pista, 30401 cilindros, 488397168 sectores en total Unidades = sectores de 1 * 512 = 512 bytes
I have a Windows XP system, and wanted to install Ubuntu to a 100 GB XT3 partition on the same drive. I was told I could chainload Ubuntu from the NT Loader menu. I booted from a Ubuntu 10.04 CD and ran the installer. It didn't find any hard drives. On a hunch, I tried the 10.04 alternate installer CD. That DID find the hard drive and partitions. I had the installer make /dev/sda7 (the XT3 partition) the root. Installation proceeded smoothly, but then the installer told me it did not see any other OS's on my drive! Why? I directed the installer to place grub on /dev/sda7 instead of the MBR.
Per the instructions I was given, I used DD to copy the first 512 bytes of /dev/sda7 to the Windows primary partition (sda1) as bootloader.lnx. But the resulting file is empty, and it won't boot. I repeated the whole process - formatting, installing FOUR times, and same results. I have no idea where GRUB was installed. It is apparently not in the MBR, because I still have my normal Windows boot. I downloaded the 10.10 alternate installer and got the same exact results. Even switched from XT3 to XT4. After two weeks of this nonsense, I still have yet to see Linux boot.
I downloaded the debian-live-6.0.1-amd64-kde-desktop.iso. Found here [URL] and made a bootable usb drive. After KDE starts there is the Debian Installer icon on the desktop and usually it will work, but not for me. I click the icon and wait for it to start but nothing happens?
I have an Asus P5K motherboard with an Intel Core 2 Duo 8400. It has 2 SATA hard disks, a 250 GB Seagate and a 500GB Hitachi.
I've been running Fedora 10 x86_64 for 6 months on this computer without problems.
I'm trying to do a new Fedora 11 install on this computer but the installer (Anaconda?) only detects the Hitachi disk.
I've tried to make a new Fedora 10 install to check if it was a media or disk problem and it detects the two hard disks.
I've tried to install it via a Live CD, and the installer only detects the Hitachi disk. The LiveCD detects the two hard disks, I can access it, partition, format, write, but the installer only detects the Hitachi.
I've tried to change from Enhanced SATA (AHCI) to Compatible in BIOS without success and I've changed SATA cables from one disk to the other, changed the disk order and nothing.
Must I enter some boot parameters for Fedora 11? Has the LiveCD installer some options?
