Ubuntu Installation :: Creating USB Installer Hosed Windows Host?
Nov 5, 2010
My daughter tried to create a bootable USB-stick version of ubuntu by following the steps on this site, which included using the "universal USB installer" utility from pendrivelinux.com. She was on a windows notebook (I don't know which version, probably XP), and had saved the .iso to the desktop.She's generally pretty good about following directions, but now, with no CD or USB stick in place, the windows machine HD boots directly into the installer "Try ubuntu or Install ubuntu" screen, with no trace of windows! Naturally, her SO (it's his work machine) is more than a little upset.
I am installing Jessie to a dual-boot Dell Inspiron 1150 laptop currently booting Windows XP + Ubuntu 9.04. I downloaded the small installation image:
Code: Select all//cdimage.debian.org/debian-cd/8.1.0/i386/iso-cd/debian-8.1.0-i386-netinst.iso and created a live dvd using growisofs.
The Jessie install documentation says: "If you downloaded an iso image, check that the md5sum of that image matches the one listed for the image in the MD5SUMS file that should be present in the same location as where you downloaded the image from." For the downloaded image this produced the result
There is no MD5SUMS file in the download directory. There is an md5sum.txt file included in the iso image: this lists the md5sum of every file in the image, but not that of the image itself. The check for the burned dvd was successful :
Code: Select all~$ dd if=/dev/cdrom | head -c `stat --format=%s debian-8.1.0-i386-netinst.iso` | md5sum 645120+0 records in 645120+0 records out 330301440 bytes (330 MB) copied, 1.28047 s, 258 MB/s 095a83b715e1b74b6d30b2259275f4af -
Is this a documentation error ? I next booted the laptop from the live installer dvd. After generating a number of messages, it stopped displaying a message along the lines of: "Invalid video mode - press Enter to select a mode".
I assumed it would wait for me but it soon rushed on, producing screeds of segmentation fault error messages, eventually slowing down to a rythmic display of:
Code: Select all*** Error in Xorg:free() invalid pointer: 0xb7101ce3
***Surely it should have waited for me to press Enter?
I have a Ubuntu 10.10 live cd for 32-bit. However it does not work with my system--I am guessing it has something to do with having more than 4 gigs of ram.
Anyway I am wondering if there is a way to install ubuntu 10.10 64-bit with Windows 7 64-bit.
I use to have vista and ubuntu on my PC. Yesterday accidentally I created a new partition "table" the point is that I erased all my partitions on "MyDisk". After a while I decided to re-install ubuntu ( 9.10 karmic koala ) and take advantage of the situation and upgrade to Windows7. Since I already had the ubuntu cd, I installed it first, then downloaded the Win7 cd to install it. The problem is that Windows7 installer doesn't load.
All I get is: <<BLACK SCREEN>> Grub loading. <<BLACK SCREEN>> underscore Ubuntu logo ubuntu login
So I don't know whats wrong. Right now my disk looks like this: MyDisk > MyDisk1 ntfs ( For windows 7 ) MyDisk2 > extended (using linux with 2 more partitions: ext4 and linux-swap)
I've searched the forums, internet, etc... and I can't seem to find anything on this. I installed Windows 7 using ~70% of my available hard drive space, the other 30% is unallocated. there are two partitions, the 100MB 'System' partition and the NTFS one with Windows 7.
On my first attempt to install Ubuntu: The partitions didn't look right. It detected two NTFS partitions, the first one of 100MB, and a second NTFS partition using ~30% of my hard drive, and 70% (presumably Windows) as unallocated. I decided to go ahead and try to install it over the 30% NTFS partition thinking that maybe the installer just didn't recognize the free space right or something, but after that happened, Nothing loaded and my Windows partition was trashed.
I wiped the drive, and reinstalled Windows again with the 70/30 split. On my second attempt to install Ubuntu: On step 4 of the installation process (partitions) it doesn't detect my Windows 7 installation at all. Instead, it says the disk is 100% unallocated.
Does anyone know why the Ubuntu Installer is not detecting my Windows partition correctly? If so, how can I go about getting Ubuntu to see it and install itself along side Windows?
I'm trying to install Ubuntu 11.04 alongside Windows 7, but when I boot from the CD, Ubuntu refuses to detect the presence of Windows 7. I tried unplugging all my external hard drives to see if that made a difference, but Ubuntu still can't tell that I have Windows 7 on there.
I recently did a fresh install of Windows 7 on my laptop, then shrunk my partition and set aside some free space for Ubuntu. When I went to install Ubuntu, however, it told me that no operating systems had been detected on the system. I ignored this message and just installed Ubuntu on the free space, but when the installation was finished, GRUB failed to recognize Windows 7 as well and would only boot into Ubuntu.
After several attempts at getting GRUB to see W7, I eventually gave up and used my W7 CD to reinstall the Windows bootloader which, naturally, didn't detect Ubuntu and would only allow me to boot Windows.
I've tried messing around with my Windows partition a bit, but no matter what configuration I use, I can't seem to get the Karmic installer to see it. I've resorted to using WUBI for now, but I'd really like to have Ubuntu on its own partition in case something goes wrong with Windows; plus, I'd love to be able to use ext4 and GRUB. Anybody know how I can get around this issue?
I've used the same install CD on several other machines with Windows 7 and it recognized them just fine. It's only this one computer that's having the issue.
I just installed ubuntu via the windows installer. When I try to boot it, it comes up a cmd line and gives me some choices of boot/grub... and boot/disk/... they all lead back to the cmd line except the boot/disk option which leads to a message saying that it cant find the disk...
I have downloaded ubuntu cd from bit torrent. Unfortunately my dvd rom is not working now. So i have decided to use windows installer. Can you give me any idea how to link this ubuntu which i have already downloaded from bit torrent?
I currently run windows 7, I am interested in dual booting, upon burning the .iso to the disc using imgburn, I had a few problems with the installer when I ran the live disc, I'll assume it was personal causes, I googled several things for a simple solution, I went with using the Disk Manager in Windows 7 to shrink my current partition which I only have one which is running Win 7 on 140 GB's, using the shrink function in windows I unallocated 20 GB of that partition, I used this option because the option in F11's installer would not work at all. I rebooted from disc, loading the distro, and run the installer via desktop choose the use free space option and I got an error crash when it tries to execute this option which isnt the only time I got this error bug causing me to exit the installer, I copied the debug information in the details, I hope this is something simple because F11 isn't worth this much time.
I'm trying to set up a dual boot of Ubuntu & Windows XP.I have two hard disks installed - sda is 80GB and has an existing Windows setup on it, sdb is my 160GB data storage disk.When I have installed Ubuntu on other machines, it has detected any exisiting OS's and offered to install Ubuntu alongside them.
However, this time Windows doesn't seem to be detected - it says 'no other operating systems found' and wants to install to my second (i.e. sdb) disk. I was intending for Ubuntu & Windows to sit side-by-side on the first hard disk.Although I've installed Ubuntu before, I'm a bit of a novice and I'm not sure how to achieve this - where am I going wrong?
I downloaded wubi.exe from Opera 10.61. The file downloads ok, but then refuses to do anything when I click on the file.
I also switched to my IE version, and tried to run the file from there. Again, I get the hourglass symbol for a couple of seconds, then nothing.
I'm running Windows 98. I know, I should have a newer version, but finances can't manage that right now. In the meantime, is there a manual way to run the installer for wubi and get it to work?
I want to download and install Ubuntu to run alongside Windows 7 in a dual boot configuration. and downloaded the Windows Installer, but when I try to launch it I get an error message which I captured and attached to this post. What's really wierd is that once the message is displayed, I can't get rid of it. Even running the Task Manager to try to close the message doesn't work. I literally have to restart the computer to get rid of the message!
Am I suppose to be downloading the Windows Installer (Wubi) to a CD first where I run it from there? If so, the instructions don't mention that. Can't I download it directly to my C: drive and then run it from there? If so, why am I getting the error message?
Drive 0: Used for paging file in windows and general temp file storage Drive 1: Media storage Drive 2: Windows installation
When booting off the Ubuntu 10.04 disc and running the installer, it gets up to the partition step and doesn't find my Windows installation (for the automatic partitioning and such) and lists Drive 0 as the drive it will install to. I really want it to see my Windows install and create a partition on that same drive. Can anyone help me in getting the installer to see the Windows installation?
I did a yum update last night, then rebooted and at boot up I'm left with "GRUB" letters and a blinking underscore...
I am currently reinstalling from the DVD just to reinstall GRUB... at lot of time wasted... just to re-install GRUB.
Let me know how to avoid blowing out GRUB please. I use a dual boot so I install the booter loader to the first sector of my Fedora HD. I don't understand how an update could blow out GRUB running.
I tried using the Windows installer, after not having success burning the ISO to cd, and I received another error message. "There is no disk in the drive. Please insert a disk into drive. DeviceHarddisk3DR3"
Should I use XEN or VirtualBox to host linux on windows 7 or windows 7 on linux? Since I've read about the problems of reading/writing NTFS disks with linux usnig the Linux NTFS driver, I thought it would be better to host windows on linux. I think the problem is that you never can be sure if the linux NTFS driver is going to corrupt your disk because Microsoft does not publish the format for linux developers.
By running windows on linux, I could read and write EXT3 from windows. I think there are EXT3 drivers for windows. Then I got to thinking: If I am running Linux on Windows, am I going to be using SAMBA or the linux NTFS driver? I think I'm going to be using SAMBA to read and write the linux partitions -- correct? Are there other considerations when deciding to host linux on windows or windows on linux? I'm going to using both the linux and windows partitions for software development with java/eclipse and various databases including oracle.
I have a Windows XP system, and wanted to install Ubuntu to a 100 GB XT3 partition on the same drive. I was told I could chainload Ubuntu from the NT Loader menu. I booted from a Ubuntu 10.04 CD and ran the installer. It didn't find any hard drives. On a hunch, I tried the 10.04 alternate installer CD. That DID find the hard drive and partitions. I had the installer make /dev/sda7 (the XT3 partition) the root. Installation proceeded smoothly, but then the installer told me it did not see any other OS's on my drive! Why? I directed the installer to place grub on /dev/sda7 instead of the MBR.
Per the instructions I was given, I used DD to copy the first 512 bytes of /dev/sda7 to the Windows primary partition (sda1) as bootloader.lnx. But the resulting file is empty, and it won't boot. I repeated the whole process - formatting, installing FOUR times, and same results. I have no idea where GRUB was installed. It is apparently not in the MBR, because I still have my normal Windows boot. I downloaded the 10.10 alternate installer and got the same exact results. Even switched from XT3 to XT4. After two weeks of this nonsense, I still have yet to see Linux boot.
Just to give you a brief overview of the setup that I have presently. The linux box has a series of softwares installed on it with its respective configurations. The softwares most important are python, php, mysql, mysql connectors to name a few. Everytime we need to setup a machine like this the process has to be repeated several times over and the whole nine yard steps need to carried on frequently. Alternately, we also approach it by taking a complete file system backup ['ghost' of the box, to be precise] of the system recently installed and restore it on the new system to make it less cumbersome.
What I was looking for was something like an installer that helps me to select the packages that I need to install. The packages selected gets installed and resides in the directories that I want it to, configure the default settings or help me to change the configuration during or after the installation and so on and forth. Basically, its also an activity to assist newer recruits who would want to setup such nodes at a faster rate than currently.Am completely new to such a project. I may not have explained myself exhaustively here but am ready to give anyone as much details as reqd if there is somebody out there to assist and show direction.
Ubuntu in Windows 7 (64 bits) File system installed using Wubi I got Ubuntu 10.04 LTS intalled using Wubi. That means Ubuntu resides inside Windows file / folder system. It also means Ubuntu does not have its own partition. Here is what I found out:
1) It cannot detect wireless network unlike Win 7 on this same laptop. However, when I plug in ethernet cable, it was able to detect it. Is there a fix this problem?
2) I cannot see Windows folders. How do access windows folder from Ubuntu side and vice versa?
3) I forgot to set the disk space for Ubuntu during install and I think the default is 17 GB.Would this cause me problems? If so, what do I need to do? How do I expand the disk space for Ubuntu?
I'm trying to get Synergy up and running between my Windows 7 (server) host and my Arch Linux (client) host. In rare exception, synergy works perfect on my windows host, however every time I try and run Synergy on my linux machine I get the following error in messages.log:
[code]...
I'm running Arch with a barebones Xorg install and SLiM with LXDE. I'm not sure what in the world is causing the problem and haven't been able to find anything of substance in a search.
I am trying to create a bootable USB stick in Windows to install Debian on my laptop. I have looked at the guide on the [URL] website, but it seems to assume you already have access to a Linux machine with the use of zcat and other extractors. Is there anyway to create a bootable Debian USB stick in Windows? By the way, I'm trying to simply get the USB stick to become bootable and then install the OS through the internet on my laptop. My laptop does not have an optical drive, so I have to do it this way.
I need to reinstall Ubuntu 10.10 on my PC. Previously (first time installation), was from Ubuntu Desktop LiveCD using USB. I installed Ubuntu on different drive. I didn't make any swap-drive before (I just know about it). Also, I upgraded to Ubuntu Studio manually from terminal. It was my first time, and i did a quite little mess with my current installation during the course of learning sudo and setting up for audio related works.
The problem I have now, 1. No sound from the speaker (after replacing ALSA with OSS4, which was success, and trying to get back to ALSA, which was not) 2. I missed that speaker icon on default setting of Ubuntu Studio Desktop theme. It supposed to be on top-right of the panel. That icon also contains sub-menu to "Rhythmbox" and "Volume Setting". 3. I think I made a lot of sudo apt-get install and compiling from tar, I think I downloaded many unnecessary dependency files, which I'm not using it. 4. I downloaded and install complete Ubuntu Studio audio/video/graphic package. After trying all the stuff inside, I found out that i didn't need all of them. I decide to remove the package and just get necessary software that I need to use. However, I failed to remove the package using "sudo apt-get remove ubuntustudio-etc" I can't remember what I did during the course of sudo-ing things.
I just want a fresh new install of Ubuntu Desktop, and build from grown up again, and keep the Ubuntu Studio desktop theme on top of it. I did made a little Google and find out about GParted and Super Grub Disk. What I had in mind is, 1. boot to Gparted using USB, 2. delete/clean the drive where I installed Ubuntu 3. reboot to Super Grub Disk from other USB, to fix mbr things, 4. reboot to Windows, 5. reformat the drive I've installed Ubuntu before 6. re-install fresh copy of Ubuntu again.
However I failed to boot to Gparted as per instruction on their website. I did try clicking the makeboot.bat from the USB while I was on Windows, and I still got boot error. I don't know how to Gparted from Ubuntu. I had the Gparted package installed but I get this line : Code: Inhibit all polling failed: Only uid 0 is authorized to inhibit the daemon If there is a better way to do this, rather than going through GParted and SGD to fix mbr. Again, it was my first time on Ubuntu, I just want a fresh new install of Ubuntu Desktop, and build from grown up again and keep the Ubuntu Studio desktop theme on top of it.
I have been running a dual boot system with Windows XP plus SUSE Linux 11.2 since january 2010. Now (2011-03-06) I downloaded Ubuntu 10,4 LTS, produced an installation CD, booted Windows XP and invoked the Wubi to instal Ubuntu under Windows. The good news is that it works! However, I would prefer a different setup.
Currently, when my PC boots, I can choose from the GRUB menu either SUSE Linux or Windows. When I select Windows, I see another menu where I can choose between Windows and my new Ubuntu Linux. I would like to install Ubuntu Linux such that my initial GRUB menu offers the choice between the three systems. From a few articles in the Ubuntu forums I conclude that it should be possible to do so. Is there an instruction on how to do it? I chose a headline that expresses my question in more general terms,
I have Linux installed on my harddrive, sometimes I run it as the host operating system and sometimes run it as a guest in Windows using VirtualBox. It's a nice ability, I think.
I don't think it's possible with Windows though. Is it because your average distribution includes drivers for everything known to man? Are devices/drivers configured statically in Windows so when somethings changed it breaks?
I've read all the documentation on installing Debian via CD, USB, or HD.I need to install Debian on a embedded system using only compact flash.This is similar to a HD installation, but I don't have any version of Linux installed to format.Is there someway of creating a bootable CF image from a Windows system?
Basically I download to main PC and rsync to my pi as the pi has a fraction of the speed for some reason when downloading form a source outside of my network.
The first few files will sync fine. Then I start getting errors like this
Code: Select allrsync: rename "/data/temp/.File.ext.y1716M" -> "File.ext": No such file or directory (2)
The directory on the host has user and group ownership as pi. Rsync has been setup to login without a password.
I was installing a package last night and it recompiled my kernel and some other things. I restarted and am getting issues with "mounting none on /dev failed" and "general error mounting filesystems." I tried the three different kernels listed in grub (even the recovery options) and all of them crash in similar manners and the keyboard becomes unresponsive (perhaps because it is a USB keyboard?).
I am using this as a file server and have about 1TB of files. Is there any way to recover/reinstall without having to copy all of the files off and then recopy after a reinstall?
