Ubuntu Installation :: 10.04 - Computer Freezes On Reconfiguring Graphics
May 3, 2010
Yesterday I updated my computer from 9.10 to 10.04. When I restarted my computer it appeared this message:
Ubuntu is running in low-graphics mode. The following error was encountered. You may need to update your configuration to solve this.
(EE) No devices detected.
After that, it comes a window with the question "What would you like to do?" and 5 options...
Run UBUNTU in low-graphics mode.
Reconfigure graphics.
Troubleshoot the error.
Exit to console login.
Restart X
I'm going now with the first option, because I used to reconfigure graphics but my computer freezes with no aparent reason in the login window. I have a HP Pavilion 7956.
I have been trying to enable compiz on my fedora 14, but when i enable the desktop effects the graphics just crashes and fedora freezes. When i type lspci -nnk | grep VGA for the graphics card i get:
I made alot of research on how to get Intel graphics work on Fedora, but couldnt find any solution
Just wanted to upgrade my desktop computer and after the terminal shows:
Installling new version of config file /etc/apparmor.d/usr.sbin.cupsd ...cups start/running, process 7944
The display froye, mouse does not move any more, keyboard does nothing, no chance to escape into a text terminal. Nada. After rebooting the system I get a kernel panic. This is now second of two upgrades to 11.04 that failed, and I do not know how often upgrades failed previously, but rather often.
I seem to have a small problem. Since september, i hooked up an old Acer laptop (with just 560 RAM and a 16 mib graphical card) to a computer screen, a keyboard and a mouse, so that i had an extra 'computer' for my mother to use. Old people prefer bigger screens to ponder upon.
But anyways, each time i want to update or upgrade the 9.04 Ubuntu distribution, it freezes. This is quite annoying since i really want it to upgrade to 9.10, for possible faster results.
I tried installing hardy heron on my hp pavilion entertainment laptop It starts booting when I get this message, "kernel panic--not syncing--attempted to kill init!" My computer freezes. I have to pull the pull the plug and drop out the battery.
I start using Ubuntu, after successfully installed it without any problem.Then I downloaded latest updates, etc. But,after installing a display driver, my computer freezes, refusing to go beyond the welcome screen. I tried several ways but could not solve the problem. So I decided to re-intall Ubuntu, download again the updates, again configure my settings, etc. herefore, I'd like to know whether there is any application to backup or to create a full image of a hard disk so as to avoid the long hours of re-installation.
I recently switched my primary desktop over from Windows 7 to Fedora 14. I successfully installed the OS on to my hard drive and booted up, following which I installed all of the updates and rebooted. After my first reboot I downloaded the 10.11 Radeon driver and installed it (because the 10.12 was having an md5 hash issue), the install was (supposedly) successful, but when I restarted my computer it first progresses to this screen (copied from softpedia) and then goes black for a second, and then returns to that screen and halts at the end of the progess bar and does nothing. I am looking for help to get back into my system.
I installed Linux yesterday alongside windows vista. Everything went very smooth. I restarted the computer multiple times without issue, and the menu would pop up asking me which os to load. Everything was good. But today I attempted to boot up my computer and nothing happens. The screen just stay black. The lights come on on the laptop, but nothing else. Either I try to boot it and it goes on then off quickly, or it just sits there, still on, with a black screen. I don't know if this is related, but when I was messing around with ubuntu yesterday after I installed it, it would randomly freeze and my caps lock light kept blinking on and off. I was forced to restart when this happened and then everything would be ok.
I boot linux from a usb drive so I can carry my distro wherever I go - I've been doing it for quite some time now and it's always worked wonderfully. Problem: This morning my little cousin unplugged the computer WHILE I was booting into linux. Power loss has happened before, but with no ill effects. This time however, it's decided it won't boot. The screen clears, and just as GRUB is about to load, it freezes and the computer reboots over and over.
I booted to a LiveCD of Ubuntu to try and fsck the drive, but it won't mount the volume. I've worked with this install so long, and have customized it so much I **really** don't want to do a reinstall.. What can I do?
I am trying to install Xubuntu on a old toshiba satellite A55. I threw in the live CD and did the try without any changes to your computer. The starts to load, when it finishes loading, and I can finally start poking around it freezes right away. When it freezes the graphics get a bit messed up, little ghost images next to their actual image appear (like a second icon of the same thing slightly offset, and blue/white) I had the same problem with Mint. Only thing I have been able to get running is puppy linux.
Laptop info: Celeron M CPU roughly 750mb ram ata-100 western digital drive Toshiba Satellite A55-S3062
My workplace is conducting a pilot of fedora15 for adoption as our SOE desktop. We've installed on 3 desktops and two laptops, and are experiencing an intermittent lock-up on each platform. In all cases so far over our two week trial, whilst users are performing routine work on the gnome desktop (e.g. email, web browsing, etc), the screen will freeze, and the mouse/keyboard appear to be inoperable, so it is impossible to go to a virtual desktop, etc. Only a hard reboot brings the PC back, and there are no logs, core dumps, etc.
We've been trying to eliminate sources, and have seen the fault on the following combinations:
* AMD/Intel * A variety of graphics hardware (e.g. nvidia, intel 945) * nvidia drivers (various versions), and nouveau * Gnome 3 in normal and fallback mode * rpms from the initial F15 release, and also after a full yum update (last week).
We have not been able to correlate the lock-up with particular usage patterns or system load. Sometimes, the desktop will be usable for a day or more, and other times, we may see three lockups in an hour.
There is a bug on this matter:
[URL]
I am raising the matter here to see, because I am puzzled as to why we are experiencing it on all platforms, and yet it does not seem to be so prevalent in the wider community.
I have just installed Ubuntu (9.10) and noted that in order to successfully run the trial off the CD I had to test in "safe graphics" mode. I have an NVIDIA GEforce 6600 GT card - which was discovered by Ubuntu in the first few minutes of the trial and so I activated the recommended driver and continued to test. After a successful trial I installed Ubuntu (dual partition Ubuntu / Windows XP), however, it seems the install didn't activate the required driver (as part of the process) and so I'm unable to get into my newly-installed Ubuntu at all. All I get is a flashing tty screen asking for my username and password - however it's erratic and won't recognise what I type. So - I'm stuck in a catch-22 as there doesn't seems to be a safe graphics mode option via the start (GRUB?) menu list.
I've a new Dell Precision T1500, Core i5, 8gb RAM, nvidia graphics card, that seems to freeze after some hours. I'm not sure how long exactly, more than two hours at least.
OS: Ubuntu 11.04 Cause: leave computer turned on, unattended for some time >2hrs. Symptom: Screens are blank, no response to keyboard or mouse input, reboot is only way to rectify.
Things I've tried:Turn off screen saver
Disable "Sync to VBlank" Disable screen power management, screen stays "on" always
So far none of these have corrected the issue. The screens are still on, but there is nothing displayed. Same thing did happen with Ubuntu 10.10, I'd hoped maybe 11.04 would fix it, alas, no.
I have finished reconfiguring my 1st PC Centos 5.5 with Squid and Dansguarian. Works fine the configuration is basic.lets name it to 1st PCeth0 - modem ip (public)eth1 - 172.16.1.1 (LAN)Then I've decided to change and add another Centos 5.5 for Firewall Service that is directly connected to the modem and then shares internet connection and some ports to 1st PC.
lets name it to 2nd PC, it also has two NICSeth0 - modem ip (public)eth1 - 10.0.0.1 (ip to connect to the 1st pc with squid services)so I changed the ip of the 1st PC with theseeth0 - 10.0.0.2eth1 - 172.16.1.1 (LAN)and connects the eth0 (10.0.0.2) of the 1st PC to the eth2 (10.0.0.1) of the 2nd PCthen I've tried browsing on the network but it does not work...is there a simple iptables command for the 1st PC and 2nd PC?
2nd PC (firewall to be) #vi /home/user1/fw.sh #!/bin/sh
After 6 months or so I noticed my 9.10 install getting sluggish and it started to freeze habitually. I let it go until one day it consistently froze at the startup login screen. I installed 10.04 and the problem continued - After first installing it worked for about 6 hours without a crash, and then once again the problem developed into consistently freezing at the login screen.
I tested with some USB Live sessions and my live sessions never froze, even when active for a whole day. Remembering some I/O BAD SECTOR error messages from my 9.10 crash, I determined the error may be with the hard drive so I bought a new Hitachi SATA hdd (needed more GBs anyway). I installed 10.04 on the new hdd (H and after 6 hours again it crashed. When it crashes the screen freezes for about 3 seconds and then the graphics wildly split and it's just a jagged gray screen. However, as time has gone on over the past 2 days, the freezing situation has been better in that it hasn't come to the point where the computer consistently freezes on the login screen. The time before it freezes has varied from 10 minutes to 6 hours.
I think it's maybe a software issue with the nvidia drivers. I'm having trouble diagnosing this bug or providing information. I've included the output of lspci -vvv I have the nVidia GeForce Go 6100 graphics card
I installed Ubuntu Lucid on my computer a few weeks ago (fresh install, formatted). But recently I've been having some problems.
This is about the 4th time it happens. When I randomly open a program, sometimes the whole computer will just freeze. I can't change to a terminal window with Ctrl-Alt-F1,2,3,4 or anything. I can only press the Reset button on the computer case. This is frustrating because I already lost ALL my firefox settings and addons and I don't want anything like this to keep on happening.
The problem was: *drumroll* the POWER SOURCE.
Apparently the voltage was having little drops and this caused all the hardware to freeze. This caused the system operation to be WORSE after I bought the new graphics card (since it was bigger and needed more power). I bought a new powersource and installed it and it seems everything is alright now.
I am using a 64 bit version of Ubuntu 10.04 on my Dell Studio. Sometimes my computer stops responding. I wouldn't say completely frozen, kinda semi-freeze. I am able to see the mouse pointer move and also when I move the mouse pointer over the Maximize, Minimize or Close buttons, the buttons get highlighted but I am unable to click on them. Alt+Tab key combination to move to another window doesn't work either. I experienced the same problem when using Ubuntu 9.10 64 bit for which reason I dumped Ubuntu then.
Acouple of times now, my computer has frozen while I had firefox and eclipse open. when i restart it, firefox will not run because it is under the impression that it is already running; eclipse will start up, but does not allow me to access the necessary workspace because it is under the impression that it is still in use. how can i get rid of these problems? i tried pkill for firefox, but it does not show up on the list of processes running...
I have a Asus UX30 with an Intel GMA 4500MHD laptop with ubuntu, working with no problems except that when I'm watching some video it often freezes. The screen turns black and the only way to get it some where is to shutdown in the power button. Is there any special reason for computer suddenly freezes
my wife's desktop has been freezing almost daily, leading to a reboot. It's an HP Pavilion (specs here) and it has Ubuntu 11.04 installed since soon after 11.04 came out. There doesn't seem to be really any rhyme or reason to the crashes, except that it might happen more often when she's web browsing with Firefox. I tried looking at /var/log/syslog, but to be honest I wasn't really sure what I was looking for. I did notice that syslog would stop recording at the same time the mouse and keyword freeze. Has any one seen this problem or be able to give me some advice on how to find out what's going on?
For some reason or the other, after some time the graphics on my computer becomes distorted. I had this issue before reinstalling my operating system, I thought that reinstalling the operating system would fix these issues, but they still remain.
Also, I never encountered this issue before upgrading from openSUSE 11.2 to openSUSE 11.3. Of course, restarting my computer fixes this issue.
An example of what I am talking about can be found here:
I have just bought a new PC, which uses the integrated graphics built into the motherboard rather than a graphics card. I have also installed Suse 11.4, but have been disappointed by the inability to obtain good graphics when either using archived tv programmes or streaming tv. For example, when using the BBC's iplayer, I can get a good picture only when the screen is not maximised. If I maximise the image then the sound continues, but the picture freezes. On my old computer, using 11.1, this was not the case, since I got a good picture in either basic or maximised mode. I'm guessing I might need a graphics card, but thought I would ask your opinion first.
I am using KMS with a radeon 3650, KMS with kernel 2.6.33.2, xf86-video-ati 6.13.0 and mesa 7.7I am using fluxbox, and only have one transparent terminal running. I have not been playing any games(so no 3d acceleration?).My computer is getting far too hot from this. Not overheating to the point it shuts down, but the fan is going full bore, and mplayer stutters when playing a movie.This never happened when I was not using KMS, so it seems likely that that is the cause. It is definitely related to graphics, because when I exit X the temperature cools rapidly.Is this just because KMS is new and still being worked out, or is it something that can possibly be fixed?
I recently installed a fresh copy of ubuntu 10.04 on my desktop computer which also has windows xp installed on it.The problem i`m facing with the installation is that,the system randomly freezes and i`m unable to use anything(MOUSE,SHORTCUT KEYS etc..,)All i could do is to go ahead and perform a hard restart using the power button.
I have recently been experiencing some issues with the powersave on my computer. I had my computer set to put the display to sleep after 10 minutes and put the computer to sleep after 30 minutes. The screen saver also activates at 5 minutes. When I woke up my computer (hit the power button) the computer would sometimes tell me that it was going into low graphics mode. I had to reboot to get my x server back. I disabled the power save to fix the problem, but I would really like to have it back. My latest Xorg.log gives an error, but I'm not sure if the power save caused the problem (more below). I am running a computer with an Intel Integrated chipset.My questions:
What caused the x server to crash?Should I post a bug report on Launchpad? If so, how? (im a bit of a noob as far as bug reporting)How can I fix the problem?Xorg.log:
Code: X.Org X Server 1.7.6 Release Date: 2010-03-17
When the custom animations added to my presentation exceeds an amount and i run the preview, my computer freezes. I have never had such problem with microsoft's office. I have open office 3.2 on ubuntu 10.04. my system has 4GB of of ram, core i5 430m cpu with integrated intel graphics. is this phenomenon natural? is it duo to my system limitations or it's an open office bug? what could i do now?
