I tried installing hardy heron on my hp pavilion entertainment laptop It starts booting when I get this message, "kernel panic--not syncing--attempted to kill init!" My computer freezes. I have to pull the pull the plug and drop out the battery.
View 1 RepliesYesterday I decided to dual-boot windows 7 and Ubuntu 11.04. I successively instaled Ubuntu the first time using a flash drive. However, I found that I had made the partition for Ubuntu way to large. Having no idea what to do, I messed around with the partition sizes. Through a series of... mistakes, I deleted the two (the main space and swap space) linux partitions. When I restarted my computer I got the "partition not found" error. So from there, I burnt another ubuntu disk, (the flash drive I used had been reformatted for use on an Xbox) I am able to boot a live version of ubuntu on my computer. However, when I go to install Ubuntu, something goes wrong. After copying all the files, it goes into kernel panic about not syncing, and freezes.
I had looked up some advice on the web, and they said that it might be a memory error. However, Ubuntu 11.04 does not have the memtest86 or whatever, (at least that I could find) So I took out the smallest RAM stick (1 gig, leaving the laptop with 2 gigs of RAM) and it still freezes.
I included the story to see if I did something wrong with any of my steps that may have permanently done something bad to it.I know it does not sound like it, but yes, I only installed Linux yesterday, therefore, still a newb.
It is my first try getting Linux on my pc which is an Acer Aspire Z5610. This is not the first time for me when I am getting an Kernel Panic error on this computer.
I looked up google hoping to find an answer and I found out that it may be my BIOS's fault. I currently have Windows 7 on this PC. I have a Phoenix BIOS and there is an update for it called "Bios Linux" on the official Acer support website.
OK, after this short introduction, that's the error:
I really hope to get support for this problem as I can not literally install any other OS to this PC than Windows 7 because they fail with Kernel Panic.
Tried other Linux Editions and even Mac OS Intel Edition and IAtkos V1 and V7 and they all give kernel panic.
I got this weird kernel panic in a brand new computer that my friend bought a few days ago.
The hardware specs are:
- AMD Athlon II X3
- 4 GB RAM
- SATA HDD and DVD
- Motherboard: MSI K9N6PGM2
Whats happening? I have installed openSUSE in a lot of machines and this is the first time that i got this.
Tried with a lot of media that i have here, LiveCD's, various DVD's and nothing.
I recently installed Debian squeeze on one of my older pcs. I have had this computer for a long time with windows so I know there is no hardware issue. About half an hour after being turned on in Debian the computer goes to a black screen and the num lock caps lock and scroll lock keys flash.
View 1 Replies View RelatedPreviously we ran a 2.6.23 Linux kernel on our systems. We have now upgraded to a 2.6.32 kernel and are in the process of testing to make sure everything works. We have a driver for a Magtek Intellistripe 65 that was previously working in the 2.6.23 kernel. Originally it didn't want to be loaded into the 2.6.32 kernel at all. I had to make some changes to the code (ie replace kill_proc and other functions that have since been removed/replaced) and now when the card is removed the system freezes. I have a feeling that it could be to do with changes to usb-core, but i'm not sure.
I looked through and diffed the kernel for changes to usb-core, but i cant see any earth shattering changes to it, so i believe it still should be working fine. I've tried my modified version on the 2.6.23 kernel, and its all working fine, so it wasn't my changes that broke it.
When I load the live CD into my computer, the DVD drive spins very fast and then drops down to command lines with a kernel Panic. I have tried with the Final Release and with the Release Candidate. Because of this I cant even load up to the live CD enviroment.
It also mentions the name of my mother board in the code, the motherboard is a gigabyte G41M-ES2L and is brand new.
Could someone give some advice or help? Currently I dont have ubuntu installed on this computer as I went for a fresh install with vista.
I had FC10 working nicely but decided to move to FC12 to be able to use the latest and greatest... Turning out to be nightmare!
My HDD is partitioned into three:
(hd0, 0) 100MB : used to be original /boot for FC 10
(hd0, 1) 120GB : /home
(hd0, 2) 30GB : /
> First thing tried: preupgrade
Using this preupgrade setup happend and asked to reboot. However, upton reboot got locked in stage2. So this option was abondoned.
> Second thing tried: installation CDs
Using this method formatted (hd0,2) and installed FC12 on (hd0,2). However, did not change anything on (hd0,0). This still held all the upgrade information from the previous trial. Now, when I rebooted after the install there was a kernel panic with error "kernel panic not syncing vfs". Thinking it might due to the (hd0,0) partition and errors in my install, I abandoned this.
> Third thing tried: installation CDs
Using this method I formatted both (hd0,0) and (hd0,2). The install was similar to above but now (hd0,0) was also formatted and after install was empty. But upton reboot I still got the "kernel panic not syncing vfs" message. I dug through google and saw references to problems in grub.conf and lo behold there were problems with my grub.conf. I don't see the initrd line at all nor do I see the initrd*.img file in my disk. The grub.conf is:
---
default=0
timeout=0
splashimage=(hd0,2)/boot/grub/splash.xpm.gz
hiddenmenu
[Code].....
I am running an Hp Pavillion dv6000 with the Broadcom card that never seems to work for Linux. I recently talked with my friend who said he found a way to get it work.following his instructions I opened Synaptic and checked the package bmcwl-kernel-source to be installed.I went through the process of it all and it said it had install successfully. I restarted the computer and when I tried to enter my operating system I got this error "Kernel panic - not syncing : VFS : Unable to mount root fs on unknown - block(8,1)"
I have previous versions of Linux on my computer so I can still get in to those if need be but I don't know how to undo what I did or why it isn't working for that matter. Does anyone have any ideas as to why I am getting this error and how I can fix it?
this is what i did i downloaded the latest stable kernel archive from kernel.org and extracted the archive into the download directory (i don't think that matters though) then i downloaded and installed the ncurses archive (needed for menuconfig) then i opened a terminal and navigated to the directory that was extracted from the archive and issues the floowing commands
View 9 Replies View RelatedI am trouble trying to get vpnc to work on my laptop.
Using the same computer via Ubuntu, it works fine.
I used to use an older kernel with the cisco vpn client, but had to go through the motions of turning off cpus in order for it to work. I gave that trick a try and it does not work.
I pretty much followed the instructions from: Gentoo Linux Documentation -- Gentoo vpnc HOWTO
The machine completely locks up right after I enter my password...
I don't see anything relevant in the /var/log/messages file.
Is there another log file to look into specific to the vpnc?
I am having a problem with my Fedora11, I am not sure wether it is software or hardware but this looks serious. My computer is running very slow and freezes up every few seconds. Every time I reboot I would get a kernel failure pop-up.
This is what the message says:
Kernel failure message 1:
Kernel failure message 2:
Call Trace:
I'm using openSUSE 11. I'hv tried to upgrade it to 11.1 with a x86_64 installation DVD (as I did earlier), but it failed. It showed the following message:
[Code]...
eventually same type of problem happend when I was trying with fedora 10... fedora 9 and openSUSE 11 install smoothly in my 64 bit machine (compaq SR1730IL, Intel pentium 4, 524 and 1GB DDR2 RAM)
I decided to try Kubuntu (10.4 64bit) again today, it's been a few years since I last tried it. The installation went well, but now I don't seem to be getting past Grub. I get a message that says: Kernel panic - not syncing:VFS:Unable to mount root fs on unknown block(0,0) I tried to use the recovery mode option in grub but that gave me the same message.
View 9 Replies View RelatedI installed mythbuntu from a live CD on an old machine with an IDE hard disk just to play with it. It worked a treat, so I bought an Acer Aspire Revo R3610 and used dd to copy the old HD contents to the new one, and then gparted to resize the ext4 partition.
On boot I got - Kernel panic: VFS: Unable to mount root fs on unknown-block(0,0)
I checked every grub2 command and it all looked fine. I then tried booting the original kernel that the live CD installed (2.6.31-14) and it booted! I tried 2/6/31-17 again, and got the panic.
After much googling, I found a suggestion to do - sudo update-initramfs -k all -c -v and this worked.
Is this expected behaviour? One of the delights of Linux is that installs move smoothly between machines, but this one didn't. Was this due to the old machine using IDE and the new one AHCI SATA? How do I get an initramfs that's flexible and will boot smoothly on any given hardware?
In my internal disk i had installed 10.04 and 10.10. 2 days ago after a restart my system did not boot and i got the message: kernel panic:not syncing VFS unable to mount root fs on unknown block(0,0).
For 2 days i tried to solve the problem without success and today i installed 10.04 in the entire internal disk but the problem(message above mentioned) remains.
the result of the sudo fdisk -l command is this
Quote:
ubuntu@ubuntu:~$ sudo fdisk -l
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[Code]....
sdb is my external hard drive in whick i also had 10.04 installed but never used it.
I've decided to switch one of my workstations from debian to fedora and I have some issues that I would like to discuss. I've installed the fedora 12 from a live cd and everything worked fine but when I use yum to install software the caps lock key blinds and my old acer 1.5 celeron laptop freezes. Using lmsensors I've noticed that the cpu temp is miniumun 60 degrees and the cpu fan is always on. I've used google and found some ways others tried to resolve this but none worked.
I thing it's a kernel bug so I want to know how to collect all the data.
I woke up this morning and my fedora 15 install caught a kernel panic over night. See pic attached.
View 4 Replies View RelatedI am trying to install openSUSE 11.3 on a Dell Dimension XPS D233. When the system loads the install after the second of six pieces it always locks up and the Caps Lock and Scroll Lock start flashing. This in my experience as a IT Specialist means a kernel panic has occurred. Does anyone know of the way to correct and/or bypass this issue?
View 4 Replies View RelatedI installed CentOS 5.5 and after the install when the system reboot, it give me a kernel panic error saying that it don't find the drive /dev/sdb4. I didn't install Grub since Ubuntu is already present on the first drive. I let Grub2 OS prober install it in Grub menu. Here is the grub line:
menuentry "CentOS release 5.5 (Final) (on /dev/sdb4)" {
insmod ext2
set root='(hd1,4)'
[code]....
The Fedora 11 Live CD was tested on a Dell and it is good. On the HP Pavilion a705w, with an Intel Celeron 2.93HHz w 760MB RAM, the install fails with kernel panic. The cd was burned on the HP.
A colleague suggested that the HP may not be compatible with the kernel. Are there startup settings that I might try to diagnose the panic issue? Perhaps there is a verbose boot up process that pauses so one can take notes?
i m trying to install Centos 5.5 on a x86_64 machine i use kickstat and cobbler but during the %pre script the installation failed with the following message
kernel panic ; not syncing nmi watchdog does someone what can be the cause of that?
Here is the beginning of my kickstart file with the pre part
url --url=http://cobbler.int-evry.fr/cblr/links/Centos-5.5-x86_64
# If any cobbler repo definitions were referenced in the kickstart profile, include them here.
repo --name=el5-x86_64-rpmfusionnonfree --baseurl=http://cobbler.int-evry.fr
[Code]....
I've been trying to get Ubuntu on my beloved 4 year old Acer desktop that's been chugging like a tank. However, after either a fresh install or upgrade, I would get the following error:"Kernel panic - not syncing: VFS: Unable to mount to root FS on unknown-block(0,0)".I've looked here and there, and one of the issues it would seem is the kernel not recognizing my hard drive if I'm correct. One of the suggestions was to upgrade the kernel however, I have no idea how to do such a thing if I can't get into the OS.
View 9 Replies View RelatedI ran an upgrade to 11.04. It boots fine into KDE, then panics (flashing Caps lock) about a minute later. The Live CD runs fine. Here's the part of my syslog that looks related:
[Code]...
basically put a new hard drive in my old computer and wanted to install fedora on it, downloaded fedora 12 dvd iso (3ish gb in size) have burnt it to a dvd disc, turned my laptop on and set it to boot from cd drive, restarted it, it reads the disc and displays the following message:
ISOLINUX 3.75 209-04-16 ETCD Copyright (C) 1994-2009 H.Peter Anvin et al
Could not find kernel image: Linux
boot:_
The uderscore is flashing and i can type stuff in but have no idea what to type in to find the kernel image, or why it cant find the kernel image.
After reading this article openSUSE News - Forum Users Benefit from openSUSE KDE Repository I added that KDE repo to yast and switched all packages.
After rebooting it says (failsafe kernel configuration says the same):
Kernel panic - not syncing: VFS:
Unable to mount root fs on unknown block (0,0)
And stops at this string: "[<c0203826>] kernel_thread_helper+0x6/0x10" and capslock light is blinking.
Hardware config as following:
MB: Gigabyte g31m-s2l
[URL]
CPU: Intel PD 2.8G
RAM: Kington DDR2 800 512Mx1
HDD: Seagate 80G IDE x 1
Tried to use all netinstall, DVD install, i386, x86_64 and install parameters (like linux text, noapic, nomsi, nousb etc) of CentOS 5.3 install disk, after press 'enter' to start install, it shown kernel panic error and the system halt. From the error message, i just found maybe some error related to 'Intel i915'.
But when use CentOS 4.6 install DVD, the installation can go smoothly and system run without any error (even can't find the lan card) After search past post, someone claimed that this motherboard can used to install CentOS 5.2. Does anyone had exp. on using the MB to install CentOS 5.3?
tried preupgrade to F12 got uncompression error kernel panic-not syncing VFS unable to mount root fs on unknown block(0,0). H.
View 1 Replies View RelatedI've been using Linux for a few years, but this is my first time using Fedora. I installed it on an old computer last night and rebooted, and everything seemed good. I let it start to install updates, but after they were about half done I stopped it, turned the computer off, and went to bed. I know that was stupid of me, and I'm afraid it screwed something up because now when I boot I get the error "kernel panic-not syncing VFS:unable to mount root fs on unknown-block(0,0)".
When I looked up the error on Google it seems a lot of people get this after installing a kernel incorrectly, so could stopping the update in the middle perhaps screwed with my kernel? Could I simply chroot into the installation from the live CD and run 'yum install kernel26'?
I tried to upgrade Empathy from 2.28 to 2.30 via Synaptic but the upgrade always failed as there were some errors to do with the dependencies (libglib2.0* and others). The dependency issues were odd as it told me that Empathy wanted to install files that were older than the existing ones. So I decided to uninstall Empathy and all its dependencies, and re-install the whole (updated) package and it's dependencies from scratch via Synaptic. After the install, Ubuntu told me that there were broken packages and Update Manager kept on popping up asking me to run a partial upgrade to fix these broken packages. Well, the partial upgrade also failed (due to the same dependency issues , I suspect) so I decided that I'll run a full system update (as Update Manager had being bugging me prior to my failed Empathy upgrade). 486 Mb later, Ubuntu no longer wants to boot - it freezes on the splash screen.
When I start it in recovery mode, it spews out the various processes being loaded. Trying to run earlier kernels (2.6.31-19 / 17 / 14) from GRUB, in both normal mode and recovery mode does not seem to help.I am running Ubuntu 9.10, kernel 2.6.31-20-generic.
a) Is the problem to do with the kernel - did the update try to update the kernel as I note that there is a new stable release (2.6.33-2)? However, GRUB still indicates that the kernel is 2.6.31-20.
b) Would updating the kernel to 2.6.33-2 help? If so, how do I do this?
c) Is the problem, as I suspect, to do with the libglib* files? If so, how do I fix it?