I put Ubuntu on my G60 hp laptop a few months ago and have not touched Windows 7 since. How do I go about removing windows and leave linux with access to the entire hard drive?
View 9 RepliesI got to the part where I'm supposed to partition Mint. I've got a 500GB hard drive, and I thought I'd give 300GB to LM--but I'm unclear about using ext2, 3 or 4. What about the swap file? Is that automatic?
View 10 Replies View RelatedIm looking at getting a laptop and dual botting it with ubuntu and windows and my boss said when he did that on his laptop it caused all kind of problems, but that was 2-3 years ago. Is it still a big buggy doing this or should i be able to dual boot on any laptop i get?
View 4 Replies View RelatedOn duel booting windows 7 and ubuntu on an hp laptop. All 4 partitions are taken up. I know i need to delete one partition to make room for ubuntu. Should I delete the windows recovery or hp partition? Or is there another option?
View 5 Replies View RelatedI will be buying a laptop in the coming months for college and my intention is to run Ubuntu as my primary operating system, but I still want to have Windows 7 as a crutch. I know there are multiple ways to do this (Wubi, seperate hard drives etc.) but I was wondering if it were possible to just install it and if there were an option to partition your existing hard drive so they are virtually seperate from each other.
View 5 Replies View RelatedI just searched the forum for ibex and nothing turned up - but I've recently had a surprising experience worthy of a thread (IMHO). Used to be an UBUNTU devotee, until this and working at netuxo.com which is taking me to debian...
Was making a dual boot laptop, and found that on THREE seperate attempts UBUNTU ibex, whilst it would of course make a near flawless laptop install replete with wi-fi it would NOT permit windoze to remain in the MBR or indeed on the drive. In a fashion reminiscent of M$ it took a fascist attitude and insisted on owning the machine, in one case actually stealing the partition, despite selecting option to only use free space. In the other two it just messed the MBR up.
I recently bought a refurbished HP Compaq NC6000 which had a new installation of Win XP put on it but takes about 5 attempts to boot up as it just sat at the load screen and freezes. So I decided to install Ubuntu 9.10 as a Dual boot with the view to getting rid of XP once I had Ubuntu up and running, which I have now. So cant understand why XP wouldn't work lol. Now I would like to fully get rid of XP and just have Ubuntu as the only OS on the laptop. Currently as it is Dual Boot I have my 80gig Hard drive partitioned with both OS�s on it.
Could someone point me in the right direction of how to get rid of XP cleanly so I just have Ubuntu left on my machine. I don�t really want to re-install Ubuntu as I have spent the last week getting it set up, so would it be possible just to get rid of XP? Also would getting rid of XP mess up the Grub Boot loader menu?
I'm a complete an utter newbie on this forum, and indeed to linux/ubuntu in general so pardon me in advance if some of my question makes no sense/sounds silly/makes you want to exterminate all noobs. Basically, I've had bad experiences (i.e. had to use my recovery system) trying to install a dual boot system with OpenSuse and want to get some sound advice before I proceed with installing Ubuntu, instead of having to go through the agony of formatting and recovering Vista HP again, and consequently trying to teach it all over again how to suck less.
Okay, so less waffle and more questioning. Background information is that the laptop is a Compaq F560. It has at present Win Vista 32 HP on the primary partition (C), with a recovery partition on (D). It has a very basic, almost un-alterable BIOS, 1.5Gb of RAM, 120Gb HD, standard CD rom, integral nVidia 6100m graphics card, a broadcom wireless network adaptor and various other bits n' bobs.
When installing OpenSuse last time I found 2 huge flaws with my method. First one is, that I didn't have wired networking available to me at the time, and foolishly forgot to get hold of the wireless adaptor drivers before installing Suse. No biggy you say, just go back to windows and download from there. Great, except I'd bozzed up the MBR too, so couldn't do that. Suse, for it's part, ran fine. Very smooth. I just couldn't do anything with it.
What I'm now looking to do, is give Ubuntu a shot, as part of a dual boot system, with Vista on the other half. I want to make vista the default boot system. I DONT want to have to go through my compaq's recovery system again, if possible. To meet these objectives, Ultimately, I'd like to transfer all of my operations across to Ubuntu, but I'm too windows-dependent at the moment, though some sort of windows-emulator wouldn't be a bad idea if anyone knows where/how/what.
Installing Ubuntu on the laptop said it succeeded and required a restart, then before shutting down and after the cd popped out a string of
end_request: I/O error dev sr0, sector 2xxxxxx...
end_request: I/O error dev sr0, sector
end_request: I/O error dev sr0, sector
Thing is, grub didn't install! I'm pretty sure a full install of ubuntu 10.10 in on a partition that I can't access. To complicate matters further, loading Vista necessitated a restart when it installed a "generic volume driver" by itself. Restarting vista doesn't show any difference (obviously since vista can't see linux formatted partitions).
I had 9.10 installed and I did an upgrade to 10.04. However I cannot see anymore my Windows Vista partition with grub.. I have a Toshiba laptop Satellite p305.This is my boot script output:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in [code].......
I just did an upgrade from 9.10 to 10.04 and now I can't boot into Windows 7 on this dual boot desktop. I usually do a clean install but with a laptop and desktop a copy of Windows 7 and Ubuntu on each machine it's getting very tiring with 4 os's so opted for the upgrade this time.
During the installation there was a window that game up about upgrading grub and what devices to install it on. The help box was not very complete and seemed to say to click all the check boxes which included the main drive and it's partitions including windows. During the install somewhere it said something like grub could not be installed on one of the devices which I think was sda6 which is probably the Windows 7 partition.
So how would I get the option of booting into Windows 7 on startup as now I only get a blank black screen when I click on the Windows 7 option upon bootup? I hope I don't have to reinstall one or both os's again from scratch as this is becoming to much work to do on two systems every 6 months, especially with the amount of programs I have installed.
I had a dual boot machine with fedora 12 and windows vista and I could use grub boot-loader to switch between two. Few days ago windows got corrupt and I have to reinstall it. I put windows 7 now and as usual it erased grub. So to reinstall I put the fedora 12 installation CD on and followed some usual setup steps. When I got the command line I issued the command "grub-install /dev/sda" (sda not hda because It showed bunch of sda, sda1..) but surprisingly it said grub command not found. I remember doing it before while it worked fine.
View 4 Replies View RelatedI have a netbook running Windows XP as standard. There is also a recovery partition which came from the factory.
In the past I installed Ubuntu (I think 9.something) from USB key and all worked fine. However my XP became corrupted and I needed to do a repair on it. After this, Ubuntu became removed from the boot select menu.
Since then, Ubuntu has become updated to 10.04, which I now cannot install.
The Live CD tells me there is a "file IO error" and simply stops installation at around 70%.
I did manage to get into Ubuntu from a Live USB using Wubi. However when I chose to install Ubuntu to a Harddrive, the option to "install side by side" was missing.
After reading on the forums, I did a chkdsk /f on Windows and tried again. Now my liveUSB does not show a boot menu!
When I select to boot from USB stick, the screen goes blank with a flashing cursor. Ctrl+alt+dlt reboots.
I'm really lost here! It seems when I fix one problem, another problem arises!
Also when trying to instal Ubuntu within Windows, the process goes through to 100% and asks me to reboot. When I do so, the option for Ubuntu does show in the boot menu. However when I select it, I get an error "Windows boot failed: file wubildr.mbr and status: 0xc00000f - something is corrupt".
I have Ubuntu 10.04 LTS and Windows XP installed on my laptop. Usually when booting, I get the GRUB 2 menu and I can boot into either Ubuntu or XP.I was playing around with EasyBCD, then after trying to remove it I was unable to boot into Windows, I used a Windows 2000 CD recovery console to fix the MBR (using: fixboot and fixmbr).Now Windows starts up when I power on, but I don't get the grub menu anymore with an Ubuntu option. If I boot from the Ubuntu Live CD and try to mount my Ubuntu partition (/dev/sda5) I get this error:
mount: wrong fs type, bad option, bad superblock on /dev/sda5,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
[code]....
I have just installed Ubuntu 10.4 x64 onto a machine with Vista Ultimate x64. When I boot the machine, the Windows option comes up in the GRUB menu. However, when I attempt to boot Windows, I receive the following error: No such device: de80ab9f80ab7d21. error: No such partition. Press any key to continue...
I looked around and found a similar issue at [URL] However, before trying to fix the issue by guesswork or via solutions that worked for a similar, though not necessarily identical problem. I've run the boot info script (see output below) mentioned several places on this site as a valuable input for boot problem tracking. how to get Windows to boot on my computer?
[Code]...
I'm trying to dual boot Win7 and Ubuntu WITHOUT using Grub. This is to support Bitlocker encryption.
I followed this guide, and now when I select Ubuntu I get a Grub> prompt and no ubuntu.
I feel like I'm halfway there, I just need to get Grub to load correctly or something.
if having a boot partition is recommended for dual boot installation of Ubuntu 10.04 and Windows 7 and why?
View 1 Replies View RelatedI have Windows 7 on my Dell Xps laptop, and I want to install Ubuntu or Fedora as a dual-boot. Will that cause my system to slow down?
View 2 Replies View RelatedI am trying to install Ubuntu on a machine that already has Windows 7 on one partition. Obviously I intend to install it on the other free partition. So I downloaded the iso burnt it onto the disk and pop in the disk and the boot the machine. The installation screen comes up I selected the first option (Try Ubuntu without installation), I just see a prompt after a few seconds and then the screen goes blank and nothing happens. Unable to detect a signal, The monitor goes into standby. The same thing happens if I use "install Ubuntu" option as well. I downloaded minimal install version Ubuntu and tried to install with that. since its old school installation, the installation completed without any errors, but when I restart the grub come up and when I select to boot into Ubuntu, I see the same behavior i.e. the screen goes blank and never boots to anything. This is a machine on which I was using 10.4 until yesterday.
View 1 Replies View RelatedI currently have a dual boot on my 160gb hdd, but even that feels cramped. i was wondering...I have a spare 40gb harddrive compatible with my laptop. could I just install the windows 7 installation there?
assumably i'd swap in the appropriate windows 7 hdd whenever i'd want to load windows 7 at Grub.
what do you guys think?
I just got a Toshiba Mini NB305-310 and tried to install Ubuntu 10.04 on it using the .iso file on a flash drive. When I try to boot into Windows XP, the loading screen comes up for a second, flashes blue, then restarts the computer. I'm able to boot up in Ubuntu, but it takes a LONG time with the screen black before it goes to the Ubuntu loading screen. I saw in an earlier post that it's helpful to post the output of the Boot Info Script, so I've posted it below. I'm new to the forums, so if I'm doing anything wrong, please let me know:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #5 for /boot/grub.
[code].....
I am trying to run a dual boot system with Windows 7 and an Ubuntu 9.10 installation from a live CD. I am running this on a Dell Inspiron M5030. Both operating systems have installed fine however whenever I run Windows the computer subsequently fails to run Grub upon rebooting and gives the following error message:
Grub loading
the symbol 'ob_bioslgrub?+E?U? Not found
Aborted press any key to exit
The unrecognised symbols are different each time. I have also had (' ') and ('ee*??S ') and ('un'). I cured this initially by reinstalling Ubuntu but after looking at the support documentation have now found that I can cure it temporarily by simply reinstalling Grub using the command:
sudo grub-setup -d /media/dd5d6cd6-cb80-40e0-baf3-13ae1ebe17a4/boot/grub -m /media/dd5d6cd6-cb80-40e0-baf3-13ae1ebe17a4/boot/grub/device.map /dev/sda
I can then run Ubuntu fine, however upon running Windows again the problem reoccurs and Grub will not run.
I downloaded the disk ISO torrent and burned it to a DVD. I then ran the DVD and installed Ubuntu using the Windows installer. Upon rebooting, I get the boot menu asking which OS I want to start. I select Ubuntu and it goes to a countdown to hit ESC to select boot options. Once boot starts, I get a bunch of crap on the command lines and then it hangs. The entry it hangs on is something to do with? child-(several numbers I can't remember right now). I hope that is enough for someone to identify where it's hanging during boot. what is causing this? The computer is a Toshiba Satallite L505D-S5983. You can look up the specs for that. Processor is an AMD Athlon II M300 2.0Ghz, 32-bit, with 3GB RAM. Video is AMD M860G with ATI Mobility Radeon 4100. Primary OS is Windows 7. I'll see if I can find some paper and a pen to write down the particulars of the error. I usually use my computer for note-taking, but I obviously can't do that here.
View 9 Replies View RelatedI just set up a dual boot on a system with fedora 12 and XP. XP in on one hard drive (sda) and Fedora on a second hard drive (sdb).
I installed grub on the Fedora disk so as to not touch the windows disk at all.
Prior to installation, in the bios, I set the Fedora disk (sdb) first in the boot sequence, and then XP (sda) so that the grub loader would boot up by default. (If I set the windows drive first then the system bypasses grub and loads straight into windows.)
My system can now boot up into Fedora fine, but if I select windows from the grub loader menu I just get a blinking cursor - windows will not boot.What do I have to do so that grub can boot into XP?
I have a 160 GB hard disk with three partitions (All NTFS):
C: (30 GB) (WINDOWS XP system partition)
D: (60 GB)
E: (60 GB)
I want to install Ubuntu on another drive (D: in this case). I have backed up all my data on D: drive. What are the steps in doing so and does Ubuntu support NTFS? If it does then will I be able to read and move data between all the drives without any problem (while running either of operating systems)?
I tried to set up a dual boot system on two separate hard drives. I installed Windows XP first (because doing so in past experience has made it easier) on the PATA 20 GB hard drive configured as slave on the first IDE channel. Then I installed Ubuntu 9.10 on the PATA 80 GB hard drive configured as master on the first IDE channel along with an NTFS partition on this drive:
[Code]...
I can't for the life of me get my GRUB whatever version I have to dual boot these. I've spent over 3 weeks on it and then finally gave up.
But It would be really nice since I have so much software that is solely devoted to windows. Not to mention with my photography stuff it's just a whole lot easier to run everything through windows. But for the general census I do prefer Linux.
I'm running these two operating systems. (although I can't access my Windows 7 because of the boot menu problem) I think that's all that needs fixed but I'm not sure.
Ubuntu 9.10 ( I believe it's 64bit although the "about" doesn't specify) Windows 7 64bit is installed. Currently I only have access to Ubuntu.
I have ubuntu 9.10 installed and working on a Pangolin Performance system 76 laptop with a 120 gb hard drive. The ubuntu install has 65 GB free at the end of hard drive (done using Fdisk). It is STATA II hard drive. I got a dual boot to work on a upgrade for an HP desktop for my mom so I know the basics. Using the windows 7 OEM home premium I go the first steps i.e. time ect. Then it shows partitions (as 4 seperat objects 1 primary and 3 logical). The 2nd and 3rd are swap and more ubuntu space. The free space also comes up as logical and is the 4th partition. I try to install and says can not use this partition on the hard drive.I press the format and in changes to extention but still gives the same error (error log is not viewable in the install). All a can do is press a formate button in the install no menu. I formatted as NTFS in gparted and it still would not work. I saw posts about bios and XP but they were old.
View 5 Replies View RelatedI am newbie to linux os.I want to dual boot ubuntu 9.04 with windows 7 which is already running on my pc.When i tried to do it with live cd i am getting an error message "Permission denied" while extracting files from cd drive.The log file shows the information given below.My system specifications are code...
How to do proceed with it?Any body know about the error in the log file?
For a couple of years I have wanted to use a version of Linux rather than Windows. I currently use XP and regard myself as a reasonably experienced Windows user. My current system has two SATA HDDs - roughly 500Gb, the 'D' drive, and 140Gb, the 'C' drive, and I have 1Gb RAM. So I decided to try Ubuntu 9.10. I downloaded the installation file, created the disk and ran it live for a time. Then I decided to take the plunge and install properly.
I created free space on the C drive, around 17 Gb, in which to install ubuntu. The installation into 'the highest amount of free space' seemed to go well but when I rebooted I was given no opportunity to select Ubuntu - it booted straight into XP. So I tried again. This time I chose to 'install them side by side'. Again the installation went well but again, on the reboot, the system went straight into XP. I guess I must be missing something - can anyone tell me how to install so that I can boot to either XP or Ubuntu?