I can install the system, start setting it up, but eventually the system will halt with "Read only" errors, Input/Output errors on the drive the Distro is installed on and crap out. everything is working fine in Windows 7. It is just linux, seemingly. I've checked the hard-drive, memory, etc. I'm at an utter loss as to what is going on!
View 3 RepliesI am having a strange problem I've never encountered before. I have an Asus Eee S101 10.1" netbook with the 32GB SSD. I installed Ubuntu 10.04 Netbook Edition.
The other day, I was browsing with Firefox, when suddenly the entire computer came screeching to a halt. Had to power it down with the power button. After this happened, I have been unable to use the same Firefox profile I had been using. I had to start Firefox from the command line with the -ProfileManager switch, then create a new profile to keep browsing.
I wanted to completely get rid of the old profile, so from the Profile Manager I tried to delete the old one. Computer hung, had to reboot with the power switch. I then tried to browse to the .mozilla/firefox directory and delete the profile's directory there, from both Nautilus and the command line. Both times, the computer froze.
I tried a few more times, and the couple of times the computer didn't freeze, I got an error from the command line saying a Bash input/output error. After this error appeared, it would appear no matter what command I ran - I couldn't even run a sudo reboot now.
I can create/delete other files and directories, just not that Firefox profile.
whenever I copy (or move) files from one place on my hd to another One or two of them dont copy, and I get an error similar to " There was an error copying the file into [location]. Show more details> Error splicing file: Input/output error. The file is always an .avi file and always between 600MB and 1.4GB in size, how can I fix this problem?
View 9 Replies View RelatedI've been using grsync to backup my home directory to an external drive (connected via USB), but lately I've been getting errors very early in the process and I was hoping someone might be able to help me fix them (or at least understand what I'm doing wrong).
Here's the output of a window titled "rsync: stopped" and in red "completed with errors!"
rsync: write failed on "/media/LaCie/myhomefolder/.cache/champlain/osm-mapnik/6/12/23.png": Input/output error (5)
kyconway/.cache/champlain/osm-mapnik/6/12/26.png
rsync error: error in file IO (code 11) at receiver.c(322) [receiver=3.0.8]
rsync: connection unexpectedly closed (486 bytes received so far) [sender]
rsync error: error in rsync protocol data stream (code 12) at io.c(601) [sender=3.0.8]
Rsync process exit status: 12
Pavillion laptop crashed and I can not find all of my recovery discs. The computer will not allow me to do an internal recovery so I ordered a recovery download on line and burned to a disc. when I put the disc in the graphics came up and in started in Live-mode but then the error mess came: error while loading shared libraries: /usr/lib/libpci.so.3: cannot read file data: input/output error. The site said it was an ISO file but then it had a program it had me run to change it and burn the disc.
View 1 Replies View RelatedI don't know the format of these old floppie disks, ive tried
Code:
PC8-248suse:~ # file -s /dev/fd0
/dev/fd0: ERROR: cannot read `/dev/fd0' (Input/output error)
how i can go about reading this data?
I am fully aware that these following photo's are not all required for a full understanding of my issue, but I will post them regardless. Checklist to see if my computer meets best results possible for the installation. Screenshot.jpg These photos showing here are where I plan on Installing Ubuntu
Screenshot-1.jpg
Screenshot-2.jpg
NOTE: The installation has started, but only to shortly be stopped by my error message.
Screenshot-3.jpg
This is my ERROR!!! message
Screenshot-4.jpg
No matter what I try to click on, the window simply ignores the command, regardless of the amount of times I issue the command.
My Netbook is ASUS EeePc HA900, I already use Ubuntu 10.04 is ok, nothing problems, then I upgrade to Ubuntu 10.10, it is still Ok. But when I upgrade to ubuntu 11.04, it have problems with Wifi, when I connect Internet via Wifi, just input the Password, it make my computer slow to halt, and have to turn the power off to shutdown the computer.
View 1 Replies View RelatedI am running Valgrind on my program. It shows me two errors but mentions only addresses against them and not actual code even on a debug build.
The output is
==23002== Memcheck, a memory error detector.
==23002== Copyright (C) 2002-2005, and GNU GPL'd, by Julian Seward et al.
==23002== Using LibVEX rev 1575, a library for dynamic binary translation.
[code]....
What does this command mean? Is this some sort of a pipe where output of one program goes to input of another?
Code:
Today went from jaunty to koala then to lucid. The package manager doesnt work nothing works in terminal for apt-get or anything getting the message ---->
View 1 Replies View RelatedQuote:Error benchmarking: helper exited with exit code 1: Error reading 27099136 bytes at 2509258752 from /dev/sda: Input/output errorthis issue is also preventing me from making a copy/backup of the partition with gpartedwhich i decided i should do since i had a scare when booting todayunable to mount / i said fix itthen it said /var was not readyi waited it became readyi am running 10.04.2 would upgrading the kernel to get trim support fix it?
Code:
sudo fsck -t ext4 /dev/sda1
fsck from util-linux-ng 2.17.2
e2fsck 1.41.14 (22-Dec-2010)
System: clean, 247383/983040 files, 1394162/3907803 blocks
Solution: drive is under warranty and it needs to be used this is not software problem
I have dir in my HD that is very important to me,but when I try cd commad to go in the dirI got this message:cannot access `./Lab': Input/output erroralso when use ls to view the currently dir and the other dir's also I got this message:"ls: cannot access Lab: Input/output errorLab"with touch:touch: cannot touch `Lab': Input/output errorwith mkdir:mkdir: cannot create directory `Lab': Input/output error
View 3 Replies View RelatedAt the time of INSTALLATION im getting errors about not able open Input/output files... and some other errors... im using SATA 80GB HDD... i have already installed XP....
the sad thing is two months back i installed UBUNTU ..and i have worked on it...
but unfortunately i formatted my entire system and now i got this problem...
I am attempting to connect a bluetooth headset to a Telex Intercom System. I can connect my bluetooth headset to Ubuntu and use the microphone and the speaker perfectly. There are no problems with the Line-In or the Line-Out.
Is there any way to connect the BT-Microphone to the Line-Out while connecting the Line-In to the BT-Speaker?
I use the growisofs command from the terminal to do most of my burning. Mostly because i burn almost the exact same type of file every time so its pretty easy to set up. I've done this dozens of times and never once had a problem before. I loved it because it was so much simpler than doing this in windows where i would need to install a few extra programs and codecs. That was up until today where it started failing every single time i tried to burn something.
For some reason every time i try to burn a disc it gives me this error message:
Code:
I'm really at a loss as to why this is happening. Every thread i found that discussed this problem was mostly focused on k3b or brasero and never really answered the question. As far as i know nothing has been updated since the last time i burned a disc a few days ago. Everything is exactly the same as it was when it worked. The only thing i could think of that might have caused this sudden failure is that i flashed the firmware of another cd drive using the same sata port that this drive is currently plugged into, but that was in windows so i dont see how it could have affected this drive.
Code:
ubuntu@ubuntu:~$ ls -al /etc | grep resol
ls: cannot access /etc/mtab: Input/output error
ls: cannot access /etc/resolv.conf: Input/output error
[code]....
Quote:
Code:
ls: cannot access /etc/mtab: Input/output error
I don't like the look of this at all!
The title is pretty self explanatory, I was just wondering how to overcome this error, if I can...
View 9 Replies View RelatedI'm trying to install ubuntu 10.04 on my desktop. I would like to erase my old xp completely and have only ubuntu as my OS. I boot from cd but when I install it stops at 15% and keeps giving me this error:
Input/output error during write on /dev/sda.
It won't let me retry or ignore and when I cancel the installation continues until I get another error.
I installed Ubuntu 10.04 two days ago and was using my 1tb passport external HDD with it to download and store files. However today whenever i try and copy/cut and past to the HDD i get this error message..
Error opening file '/media/My Passport/test.avi': Input/output error This is obviously very fustrating and i want to stay with Linux but i do need to fix this problem else im afraid im going to have to back to awful windows.
I'm having some trouble installing Ubuntu 10.04. What I am trying to do is completely wipe all things on my computer and install Ubuntu. I have followed the instructions from Ubuntu's homepage on how to download the ISO, and ran their program to put it onto a portable USB device. Through doing all of this, I receive no error messages. Then it tells me to change the BIOS to boot from USB, so I did that. I've successfully accessed the install menu and filled in all the information requested (i.e. computer name, account name, etc.). I select that I want to delete the current partitions and use only Ubuntu. It starts to install, but at 67%, while copying files, I receive an error.
This error is:
The installer encountered an error copying files to the hard disk:
[Errno 5] Input/output error
This is often due to a faulty CD/DVD disk or drive, or a faulty hard disk. It may help to clean the CD/DVD, to burn the CD/DVD at a lower speed, to clean the CD/DVD drive lens (cleaning kits are often available from electronics suppliers), to check whether the hard disk is old and in need of replacement, or to move the system to a cooler environment.
What i am trying to acomplish is this
Code:
I have found a few guides that were to accomplish this, but they seem outdated as options they call for are not available to me.
I got interested in it when trying to play Windows games on my Mac. I've tried WINE and didn't get anywhere fast, but thats another thread for a different forum.
For now I'd like to try Ubuntu. I downloaded the ISO and burned it to a DVD and a CD.
When booting up my computer I get this message:
I have no idea what this means. I've tried to find answers on this forum with no luck.
The computer in question:
iMac8,1
Intel Core 2 Duo
3.06 GHz
4GB Memory
NVIDIA GeForce 8800 GS (512 MB)
MacOS 10.5.8
i tried to rip a dvd last night and it got 98% done then said "Data could not be written (Input/output error)"here is the error log from brasero
Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1744)
BraseroDvdcss called brasero_job_get_action
BraseroDvdcss called brasero_job_get_action
[code]....
I just received a 1TB external(Western Digital) hard drive(NTFS) for backup purposes. I'm using an Ubuntu Live CD, and an external hard drive dock. I am transferring over esata and am receiving the error:
Code:
Cannot open file: input/output error
Seems strange that it said "open". At any rate only about 60 of the 200+ GB were able to be transferred over...this won't do. I have tried to copy via CLI using
Code:
cp -r
and received the same issue. For clarification I am attempting to transfer from a mounted partition onto the mounted external.
Asus EEEPC 1215P
Intel Atom N550 1.5 GHz
2 GB DDR3
Ubuntu 10.10
Maverick Meerkat
Desktop Edition
Tried changing BIOS setting...
SATA Run Mode configuration
Enhanced AHCI
Enhanced IDE
Compatibility
Disabled
non of them worked
For some reason my soundcard is recording every playback sound. This become apparent when I was trying to make a Skype call and the other people couldn't hear me. I checked my sound preferences and noted that the input was recording what they say (they could hear an echo). Also if I played back anything it would redirect to them. This has never happened to me and I've made a lot of calls in the past.
I tested with Audacity and it records fine, but when I play back the recording, it redirects to the input channel so it's not a problem with Skype. (my soundcard is a VIA VT1708B 8-Ch). Somewhere I read that the output of aplay -l is useful.
Here it is:
I'm using FFADO on JACK in order to use my firewire device (M-Audio Profire 610) and I seem to have the opposite issue as others who have similar problems. Everything starts up fine, and I can record audio into Ardour using my inputs, but I can't get any output from any of my 8 line outs.
I've checked the connections using QjackCtl, and I tried to route audio from another program (Audacious) but I can't seem to pull audio out of the device (or the computer won't send my device audio?).
I used to be able to use Skype without a problem. I must have played with something as it now doesn't allow me to both use a microphone and external speakers at the same time.I go into sound setting and I am able to test the microphone (works) but then the speakers don't show, if I reverse the tests then the opposite happens.
View 1 Replies View RelatedFor some reason on any application that uses sound, but doesn't allow me to specify the input/output audio devices I don't get anything. I want all audio to go to my USB Headset, and not the onboard soundcard. To start off with, here's alsamixer: Here's a screenshot from Mumble (voice chat) that shows that I've set the USB headset device in there, and it works 100% fine on Mumble.
[Code]...
As you can see from the alsa-base.conf above I've tried specifying snd_usb_audio as the default device, but it's not working.